Preparation and characterization of ceramic interconnect La 0.8Ca0.2Cr0.9M0.1O 3-δ (M = Al, Co, Cu, Fe) for IT-SOFCs

International Journal of Hydrogen Energy

Volumn 36, Issue 1, 2011, Pages 747-754

  Fu, Yen Pei ^a   Wang, Hsin Chao ^a  

^a NATIONAL DONG HWA UNIVERSITY   (Taiwan)

Author keywords

Electrical conductivity; Interconnects; Mechanical properties; SOFC; Weibull plot

Indexed keywords

BOUNDARY MOBILITY; DIFFUSION COEFFICIENTS; DOPANT IONS; ELECTRICAL CONDUCTIVITY; GRAIN SIZE; HIGH ELECTRICAL CONDUCTIVITY; INTERCONNECT MATERIALS; INTERCONNECTS; INTERMEDIATE TEMPERATURE SOLID OXIDE FUEL CELL; IT-SOFCS; LATTICE PARAMETERS; SOFC; TOLERANCE FACTOR; WEIBULL PLOT;

ACTIVATION ENERGY; CALCIUM; DOPING (ADDITIVES); ELECTRIC CONDUCTIVITY OF SOLIDS; ELECTRIC PROPERTIES; FRACTURE TOUGHNESS; GRAIN GROWTH; GRAIN SIZE AND SHAPE; MECHANICAL PROPERTIES; MICROHARDNESS; PEROVSKITE; POSITIVE IONS; SOLID OXIDE FUEL CELLS (SOFC);

FRACTURE;

EID: 79551475978     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2010.10.057     Document Type: Article

References (35)

1. B. Zhu, X. Liu, Z. Zhu, and R. Ljungberg Solid oxide fuel cell (SOFC) using industrial grade mixed rare-earth oxide electrolytes Int J Hydrogen Energy 33 2008 3385 3392
2. 3-δ cathode for intermediate-temperature solid oxide fuel cells Int J Hydrogen Energy 33 2008 4681 4688
3. 1.9 as a potential cathode for intermediate-temperature solid oxide fuel cells Int J Hydrogen Energy 35 2010 8663 8669
4. J.W. Fergus Lanthanum chromite-based materials for solid oxide fuel cells interconnects Solid State Ionics 171 2004 1 15
5. N.Q. Minh Ceramic fuel cells J Am Ceram Soc 76 1993 563 588
6. N.Q. Monh Solid oxide fuel cells: materials, fabrication process and development trends S.P.S. Badwal, M.J. Bannister, R.H.J. Hannink, Science and technology of zirconia 1993 Technomic Publishing Lancaster, PA
7. B.C.H. Steele Materials for IT-SOFC stacks Solid State Ionics 134 2000 3 20
8. B.C.H. Steele, and A. Heinzel Materials for fuel cell technology Nature 414 2001 345 352
9. H. Yokokawa, N. Sakai, T. Horita, and K. Yamaji Recent developments in solid oxide fuel cell materials Fuel Cells 1 2001 117 131
10. S.P.S. Badwal Stability of solid oxide fuel cell components Solid State Ionics 143 2001 39 46
11. S.P.S. Badwal, and K. Foger Materials for solid oxide fuel cells J Mater Sci 21 1997 187 224
12. T. Tietz Materials selection for solid oxide fuel cells Mater Sci Forum 426-432 2003 4465 4470
13. Z. Yang, K.S. Weil, D.M. Paxton, and J.W. Stevenson Selection and evaluation of heat-resistant alloys for SOFC interconnects applications J Electrochem Soc 150 2003 A1188 A1201
14. W.Z. Zhu, and S.C. Deevi Development of interconnect materials for solid state fuel cells Mater Sci Eng A348 2003 227 243
15. N.Q. Minh, and T. Takahashi Science and technology of ceramic fuel cells 1995 Elsevier Amsterdam
16. 3 prepared by an autoignition process J Mater Lett 45 2000 162 166
17. 3 fine powders by hydrothermal method and its sintering J Eur Ceram Soc 26 2006 81 88
18. S. Ghosh, A.D. Sharma, R.N. Basu, and H.S. Maiti Influence of B site substitutions on lanthanum calcium chromite nanocrystalline materials for a solid-oxide fuel cell J Am Ceram Soc 90 2007 3741 3747
19. M. Mori, and N.M. Sammes Sintering and thermal expansion characterization of Al-doped and Co-doped lanthanum strontium chromites synthesized by Pechini method Solid State Ionics 146 2002 301 312
20. M. Mori, Y. Hiei, and T. Yamamoto Control of thermal expansion of strontium doped lanthanum chromite perovskites by B-site doping for high temperature solid oxide fuel cell separators J Am Ceram Soc 84 2001 781 786
21. 3 J Am Ceram Soc 1987 70 1987 265 270
22. X. Ding, Y. Liu, L. Gao, and L. Guo Effect of cation substitution on thermal expansion and electrical properties of lanthanum chromites J Alloys Compd 425 2006 318 322
23. A. Atkinson, and A. Selcuk Mechanical behaviour of ceramic oxygen ion-conducting membranes Solid State Ionics 134 2000 59 66
24. N. Sakai, H. Yokokawa, T. Horita, and K. Yamaji Lanthanum chromite-based interconnects as key materials for SOFC stacks development Int J Appl Ceram Tech 1 2004 23 30
25. 3 Solid State Ionics 134 2000 89 102
26. Y.J. He, A.J.A. Winnubst, C.D. Sagel-Ransijn, A.J. Burggraaf, and H. Verweij Enhanced mechanical properties by grain boundary strengthening in ultra-fine-grained TZP ceramics J Eur Ceram Soc 16 1996 601 612
27. J.D. Sullivant, and P.H. Lauzon Experimental probability estimators for Weibull plots J Mater Sci Lett 5 1986 1245 1247
28. I.G. Austin, and N.F. Motto Polarons in crystalline and non-crystalline materials Adv Phys 18 1969 41 102
29. J.C. Wurst, and J.A. Nelson Lineal intercept technique for measuring grain size in two-phase polycrystalline ceramics J Am Ceram Soc 55 1972 109
30. M.I. Mendelson Average grain size in polycrystalline ceramics J Am Ceram Soc 52 1969 443 446
31. M.N. Rahaman Sintering of ceramics 2008 CRC Press New York
32. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements J Am Ceram Soc 64 1981 533 538
33. B.C. Poton, and R.D. Rawling Vickers indentation fracture toughness test, part 1. Review of literature and formulation of standard indentation toughness equations Mater Sci Tech 5 1989 865 872
34. 2-δ ceramics J Eur Ceram Soc 24 2004 2641 2648
35. M.W. Barsoum Fundamentals of ceramics 1997 The McGraw-Hill Companies Singapore