Effects of particulate reinforcement and heat treatment on the hardness and wear properties of AA 2024-MoSi2 nanocomposites

Materials and Design

Volumn 32, Issue 4, 2011, Pages 2157-2164

  Sameezadeh, M ^a   Emamy, M ^a   Farhangi, H ^a  

^a UNIVERSITY OF TEHRAN   (Iran)

Author keywords

A. Nanomaterials; C. Mechanical alloying; E. Wear

Indexed keywords

AA 2024; ABRASIVE WEARS; ADHESIVE WEARS; BRINELL HARDNESS; C. MECHANICAL ALLOYING; COMPOSITE POWDERS; E. WEAR; HARDENABILITY; HIGH DISLOCATION DENSITY; INTER-METALLIC PARTICLE; NANO-MATERIALS; NANO-SIZED; NANOMETRICS; PARTICLE AGGLOMERATIONS; PARTICULATE REINFORCEMENTS; PIN ON DISC WEAR TEST; REINFORCING PARTICLES; SCANNING ELECTRON MICROSCOPIC; SLIDING TEST; T6 HEAT TREATMENT; WEAR MECHANISMS; WEAR PROPERTIES; WORN SURFACE;

AGGLOMERATION; HARDNESS; HEAT TREATMENT; HOT PRESSING; MECHANICAL ALLOYING; METALLIC MATRIX COMPOSITES; NANOCOMPOSITES; NANOSTRUCTURED MATERIALS; REINFORCEMENT; SINGLE CRYSTALS; TITRATION; TRIBOLOGY; VOLUME FRACTION; WEAR OF MATERIALS;

WEAR RESISTANCE;

EID: 79251628998     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.11.037     Document Type: Article

References (40)

1. Zebarjad S.M., Sajjadi S.A. Dependency of physical and mechanical properties of mechanical alloyed Al-Al2O3 composite on milling time. Mater Des 2007, 28:2113-2120.
2. Wang Y., Rainforth W.M., Jones H., Lieblich M. Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy-Ni3Al powder metallurgy composite. Wear 2001, 251:1421-1432.
3. Rahimian M., Ehsani N., Parvin N., Baharvandi H.R. The effect of sintering temperature and the amount of reinforcement on the properties of Al-Al2O3 composite. Mater Des 2009, 30:3333-3337.
4. Al-Rubaie K.S., Yoshimura H.N., de Mello J.D.B. Two-body abrasive wear of Al-SiC composites. Wear 1999, 233-235:444-454.
5. Diaz C., Gonzalez-Carrasco J.L., Caruana G., Lieblich M. Ni3Al intermetallic particles as wear-resistant reinforcement for Al-base composites processed by powder metallurgy. Mater Trans A 1996, 27:3259-3266.
6. Toptan F., Kilicarslan A., Cigdem M., Kerti I. Processing and microstructural characterization of AA 1070 and AA 6063 matrix B4Cp reinforced composites. Mater Des 2010, 31:S87-S91.
7. Arik H. Effect of mechanical alloying process on mechanical properties of α-Si3N4 reinforced aluminum-based composite materials. Mater Des 2008, 29:1856-1861.
8. Wang Y., Rainforth W.M., Jones H., Lieblich M. Sliding wear behavior of novel AA2124 aluminium alloy/Ni3Al composites. Mater Sci Technol 2002, 396-402:1473-1478.
9. Torres B., Lieblich M. Room and high temperature tensile behaviour of a P/M 2124/MoSi2 composite at different heat treatment conditions. J Mater Sci 2006, 41:3493-3500.
10. Costa C.E., Zapata W.C., Velasco F., Ruiz-Prieto J.M., Torralba J.M. Wear behaviour of aluminium reinforced with nickel aluminide MMCs. J Mater Process Technol 1999, 92-93:66-70.
11. Walker J.C., Ross I.M., Rainforth W.M., Lieblich M. TEM characterisation of near surface deformation resulting from lubricated sliding wear of aluminium alloy and composites. Wear 2007, 263:707-718.
12. Corrochano J., Lieblich M., Ibanez J. On the role of matrix grain size and particulate reinforcement on the hardness of powder metallurgy Al-Mg-Si/MoSi2 composites. Compos Sci Technol 2009, 69:1818-1824.
13. Torres B., Lieblich M., Ibanez J., Garcia-Escorial A. Mechanical properties of some PM aluminide and silicide reinforced 2124 aluminium matrix composites. Scripta Mater 2002, 47:45-49.
14. Sharma S.C., Ramesh A. Effect of heat treatment on mechanical properties of particulate reinforced Al6061 composites. J Mater Eng Perform 2000, 9:557-561.
15. Bekheet N.E., Gadelrab R.M., Salah M.F., Abd El-Azim A.N. The effects of aging on the hardness and fatigue behavior of 2024 Al alloy/SiC composites. Mater Des 2002, 23:153-159.
16. Shakeri H.R., Wang Z. Effect of alternative aging process on the fracture and interfacial properties of particulate Al2O3-reinforced Al (6061) metal matrix composite. Metall Mater Trans A 2002, 33:1699-1713.
17. Ma Z.Y., Tjong S.C., Li Y.L. The performance of aluminium-matrix composites with nanometric particulate Si-N-C reinforcement. Compos Sci Technol 1999, 59:263-270.
18. Fogagnolo J.B., Robert M.H., Torralba J.M. Mechanically alloyed AlN particle-reinforced Al-6061 matrix composites: Powder processing, consolidation and mechanical strength and hardness of the as-extruded materials. Mater Sci Eng A 2006, 426:85-94.
19. Khakbiz M., Akhlaghi F. Synthesis and structural characterization of Al-B4C nano-composite powders by mechanical alloying. J Alloys Compd 2009, 479:334-341.
20. Lu L., Lai M.O., Ng C.W. Enhanced mechanical properties of an Al based metal matrix composite prepared using mechanical alloying. Mater Sci Eng A 1998, 252:203-211.
21. Sameezadeh M, Farhangi H, Emamy M. Structural and morphological evaluation of nano-sized MoSi2 powder produced by mechanical milling. In: Sohi H, editor. Proceedings of 2nd international conference on ultrafine grained and nanostructured materials, University of Tehran, Tehran. Iran; 2009. p. 27.
22. ASTM standard test method for wear testing with a pin-on-disc apparatus. ASTM G99-95. Philadelphia, PA; 1995.
23. Da Costa C.E., Velasco F., Torralba J.M. Mechanical, intergranular corrosion, and wear behavior of aluminum-matrix composite materials reinforced with nickel aluminides. Metall Mater Trans A 2002, 33:3541-3553.
24. Suryanarayana C., Koch C.C. Nanocrystalline materials - current research and future directions. Hyperfine Interact 2000, 130:5-44.
25. El-Eskandarany M.S. Mechanical alloying for fabrication of advanced engineering materials 2001, Noyes Publications, New York.
26. Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci 2001, 46:1-184.
27. Kang Y.C., Chan S.L.I. Tensile properties of nanometric Al2O3 particulate-reinforced aluminum matrix composites. Mater Chem Phys 2004, 85:438-443.
28. Parvin N., Assadifard R., Safarzadeh P., Sheibani S., Marashi P. Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying. Mater Sci Eng A 2008, 492:134-140.
29. Arakawa S., Hatayama T., Matsugi K., Yanagisawa O. Effect of hetrogeneous precipitation on age hardening of Al2O3 particle dispersion Al-4mass% Cu composite produced by mechanical alloying. Scripta Mater 2000, 42:755-760.
30. Lashgari H.R., Sufizadeh A.R., Emamy M. The effect of strontium on the microstructure and wear properties of A356-10%B4C cast composites. Mater Des 2010, 31:2187-2195.
31. Walker J.C., Rainforth W.M., Jones H. Lubricated sliding wear behaviour of aluminium alloy composites. Wear 2005, 259:577-589.
32. Lim C.Y.H., Leo D.K., Ang J.J.S., Gupta M. Wear of magnesium composites reinforced with nano-sized alumina particulates. Wear 2005, 259:620-625.
33. Abouelmagd G. Hot deformation and wear resistance of P/M aluminium metal matrix composites. J Mater Process Technol 2004, 155-156:1395-1401.
34. Zhiqiang S., Zh Di., Guobin L. Evaluation of dry sliding wear behavior of silicon particles reinforced aluminum matrix composites. Mater Des 2005, 26:454-458.
35. Venkataraman B., Sundararajan G. The sliding wear behaviour of Al-SiC particulate composites - I. Macrobehaviour. Acta Mater 1996, 44(2):451-460.
36. Bermudez M.D., Martinez-Nicolas G., Carrion F.J., Martinez-Mateo I., Rodriguez J.A., Herrera E.J. Dry and lubricated wear resistance of mechanically-alloyed aluminum-base sintered composites. Wear 2001, 248:178-186.
37. Sannino A.P., Rack H.J. Tribological investigation of 2009 Al-20 vol.% SiCp/17-4 PH part I: composite performance. Wear 1996, 197:151-159.
38. Alpas A.T., Zhang J. Effect of SiC particulate reinforcement on the dry sliding wear of aluminium-silicon alloys (A356). Wear 1992, 155:83-104.
39. Bhushan B. Modern tribology handbook 2001, CRC Press, New York.
40. Islam M.A., Haseeb A.S.M.A. A comparative wear study on heat-treated aluminium-lithium alloy and pure aluminium. Mater Sci Eng A 1999, 268:104-108.