Mechanical, intergranular corrosion, and wear behavior of aluminum-matrix composite materials reinforced with nickel aluminides

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 33, Issue 11, 2002, Pages 3541-3553

  Da Costa, C E ^a   Velasco, F ^b   Torralba, J M ^b  

^a SANTA CATARINA STATE UNIVERSITY   (Brazil)

^b UNIVERSIDAD CARLOS III DE MADRID   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; ATOMIZATION; CORROSION; DIFFERENTIAL SCANNING CALORIMETRY; HEAT TREATMENT; INTERMETALLICS; MECHANICAL ALLOYING; NICKEL ALLOYS; OPTICAL MICROSCOPY; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; WEAR OF MATERIALS;

ALUMINUM MATRIX COMPOSITE MATERIALS; ITERGRANULAR CORROSION; NICKEL ALUMINIDES;

METALLIC MATRIX COMPOSITES;

EID: 0036869139     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-002-0342-8     Document Type: Article

References (43)

1. J.S. Benjamin: Modern Developments in Powder Metallurgy, MPIF, Princeton, NJ. 1988, vol. 21, pp. 397-414.
2. J.J. Fischer and R.M. Haeberle: Modern Developments in Powder Metallurgy, MPIF, Princeton, NJ, 1988. vol. 21, pp. 461-77.
3. J.S. Benjamin: Met. Powder Rep., 1990, vol. 2, pp. 122-27.
4. E. Yuasa, T. Morooka, M. Tsunoda, and J. Mishima: J. Jpn. Soc. Powder Powder Metall., 1996, vol. 42, pp. 171-74.
5. M. Miyajima, G.G. Lee, and R. Watanabe: J. Jpn. Soc. Powder Powder Metall., 1996, vol. 42, pp. 146-50.
6. R.C. Benn, P.K. Mirchandani, and A.S. Watwve: Modern Developments in Powder Metallurgy, MPIF, Princeton, NJ, 1988, vol. 21, pp. 479-93.
7. D.J. Chellman and T.D. Bahya: Advances in Powder Metallurgy and Particulate Materials, MPIF, Princeton, NJ, 1992, vol. 7, pp. 257-70.
8. F. Froes, Y.-W. Kim, and F. Hehmann: J. Met., 1987, vol. 39, pp. 14-19.
9. Y. Takeda: Proc. 1993 Powder Metallurgy World Congr., Japan Society of Powder and Powder Metallurgy, Kyoto, 1993, pp. 546-50.
10. R.D. Schelleng, P.S. Gilman, A.D. Jatkar, and S.J. Donachie: Powder Metallurgy in Defense Technology, Proc. 1984 P/M Defense Technology Sem., MPIF, Princeton, NJ, 1984, vol. 6, pp. 165-74.
11. D.O. Gothard: Modern Developments in Powder Metallurgy, MPIF, Princeton, NJ, 1988, vol. 21, pp. 511-18.
12. L. Le Brun, L. Froyen, B. Munar, and L. Delaey: Proc. PM '90 World Conf. on Powder Metallurgy, Institute of Metals, London, 1990, vol. 2, pp. 1-6.
13. G.H. Fair and J.V. Wood: Powder Metall., 1993, vol. 36, pp. 123-28.
14. F. Cardellini, V. Contini, and G. Mazzone: J. Mater. Sci., 1996, vol. 31, pp. 4175-80.
15. W.T. Nachtrab and P.R. Roberts: Advances in Powder Metallurgy and Particulate Materials, MPIF, Princeton, NJ, 1992, vol. 4, pp. 321-25.
16. S. Miura, Y. Machida, Y. Hirose, and R. Yoshimura: Advances in Powder Metallurgy, MPIF, Princeton, NJ, 1989, vol. 2, pp. 213-26.
17. T.S. Eyre: Tribol. Int., 1976, vol. 10, pp. 203-12.
18. Aluminum and Aluminum Alloys, ASM INTERNATIONAL, Materials Park, OH, 1993, pp. 623-38.
19. C.G. Purnell and P. Smith: Proc. Powder Metallurgy World Congr., SF2M & EPMA, Paris, 1994, vol. 1, pp. 645-48.
20. P.J. Blau and E.P. Whitenton: Tribol. Int., 1982, vol. 8, pp. 209-17.
21. A. Ravikiran and M.K. Surappa: Scripta Mater., 1997, vol. 36, pp. 95-98.
22. J.F. Faure and G. Brune: Met. Powder Rep., 1987, vol. 42, pp. 101-03.
23. K. Nishiyama and E. Suzuki: Proc. 1993 Powder Metallurgy World Cong., Japan Society of Powder and Powder Metallurgy, Kyoto, 1993, pp. 602-05.
24. A.K. Jha, S.V. Prasad, and G.S. Upadhyaya: Tribol. Int., 1989, vol. 22, pp. 321-27.
25. L. Pinto and E. Zschech: Mater. Sci. Forum, 1996, vols. 217-222, pp. 1593-98.
26. M.S. Selamat: Adv. Performance Mater., 1996, vol. 3, pp. 183-204.
27. P.C.R. Nunes and L.V. Ramanathan: Corrosion, 1995, vol. 51, pp. 610-17.
28. S.J. Harris, B. Noble, and A.J. Trowsdale: Mater. Sci. Forum, 1996, vols. 217-222, pp. 1571-76.
29. J.L. González-Carrasco, F. García-Cano, G. Caruana, and M. Liebich: Mater. Sci. Eng. A, 1994, vol. 183, pp. L5-L8.
30. J.M. Torralba, C.E. da Costa, L.E.G. Cambronero, and J.M. Ruiz-Prieto: Key Eng. Mater., 1997, vols. 127-131, pp. 929-36.
31. J. Zhou, J. Duszczyk, and B.M. Korevaar: Proc. World Conf. on Powder Metallurgy, Institute of Metals, London, 1990, vol. 2, pp. 307-12.
32. P.B. da Silva-Maia, F. Velasco, C.E. da Costa, W.C. Zapata, and J.M. Torralba: Mater. Sci. Forum, 1999, vols. 299-300, pp. 279-85.
33. P. Pérez, J.L. Gonzalez-Carrasco, G. Caruana, M. Lieblich, and P. Adeva: Mater. Characterization, 1994, vol. 33, pp. 349-56.
34. P. Pérez, J.L. Gonzalez-Carrasco, and P. Adeva: Mater. Sci. Eng. A, 1995, vol. 199, pp. 211-18.
35. Metals Handbook, ASM, Materials Park, OH, 1993, vol. 2.
36. K. Kondoh and Y. Takeda: Proc. 1993 Powder Metallurgy World Congr., Japan Society of Powder and Powder Metallurgy, Kyoto, 1993, pp. 567-70.
37. K. Kita, H. Nagahama, T. Terabayashi, K. Ohtera, K. Higashi, A. Inoue, and T. Masumoto: Proc. 1993 Powder Metallurgy World Congr., Japan Society of Powder and Powder Metallurgy, Kyoto, 1993, pp. 591-93.
38. M.K. Premkumar, A. Lawley, and M.J. Koczak: Modern Developments in Powder Metallurgy, MPIF, Princeton, NJ, 1985, vol. 16, pp. 467-91.
39. C.E. Costa, J.M. Torralba, J.M. Ruiz-Prieto, J.M. Badí, V. Amigó, and W.C. Zapata: Advances in Powder Metallurgy & Particulate Materials, MPIF, Princeton, NJ, 1996, vol. 1, pp. 223-30.
40. C.E. da Costa: Ph.D. Thesis, Universidad Politécnica de Madrid, Madrid, 1998.
41. "Standard Practice for Heat Treatment of Aluminium Alloys," ASTM B597, ASTM, Philadelphia, PA. 1986.
42. "Standard Test Method for Wear Testing with a Pin-on-Disc Apparatus," ASTM G99-95, ASTM, Philadelphia, PA, 1995.
43. S.V. Prasad and P.K. Rohatgi: J. Met., 1987, vol. 11, pp. 22-26.