Performance of a cutting tool made of steel matrix surface nano-composite produced by in situ laser melt injection technology

Journal of Materials Processing Technology

Volumn 211, Issue 4, 2011, Pages 750-758

  Verezub, O ^a   Kalazi Z ^b   Sytcheva, A ^c   Kuzsella, L ^a   Buza, G ^b   Verezub, N V ^d   Fedorov, A ^e   Kaptay, G ^a  

^a UNIVERSITY OF MISKOLC   (Hungary)

^b BAY ATI (RI for Materials Science and Engineering)   (Hungary)

^c BAY NANO Research Institute   (Hungary)

^d NATIONAL TECHNICAL UNIVERSITY   (Ukraine)

^e ARC the Australian Reinforcing Company   (Australia)

Author keywords

Cutting tool; Laser processing; Metal matrix nano composite; Tool life

Indexed keywords

CARBIDE PRECIPITATE; CUBIC BORON NITRIDE (CBN); CUTTING FORCES; IN-SITU; LASER MELT INJECTION; LASER PROCESSING; MATRIX; METAL MATRIX NANO-COMPOSITE; NANO-COMPOSITE LAYERS; NANO-SIZED; STEEL MATRIX; SURFACE NANO-COMPOSITE; TOOL LIFE; WORK PIECES;

BORON; CARBIDES; CUBIC BORON NITRIDE; CUTTING TOOLS; MACHINE TOOLS; METAL CUTTING; METAL WORKING TOOLS; NANOCOMPOSITES; WEAR RESISTANCE; WHEELS;

METALLIC MATRIX COMPOSITES;

EID: 79251610694     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2010.12.009     Document Type: Article

References (40)

1. S. Ala-Kleme, P. Kivikyto-Reponen, J. Liimatainen, J. Hellman, and S.-P. Hannula Abrasive wear properties of tool steel matrix composites in rubber wheel abrasion test and laboratory cone crusher experiments Wear 263 2007 180 187
2. J.D. Ayers, and T.R. Tucker Particulate-TiC-hardened steel surfaces by laser melt injection Thin Solid Films 73 1980 201 207
3. I. Barin Thermochemical Properties of Pure Substances 1993 VCh (in 2 parts)
4. S.K. Biswas Wear of metals: a material approach G.W. Stachowiak, Wear, Materials, Mechanisms and Practices 2006 John Wiley & Sons, Ltd 21 36
5. E. Bitay, and A. Roósz Investigation of phenomena taking place in LASER surface alloying steels of WC-Co Mater. Sci. Forum 508 2006 301 306
6. E.O. Correa, N.G. Alcantara, D.G. Tecco, and R.V. Kumar Development of an iron-based hardfacing material reinforced with Fe-(TiW)C composite powder Metal. Mater. Trans. A 38A 2007 937 945
7. C.C. Degnan, P.H. Shipway, and J.V. Wood Elevated temperature sliding wear behaviour of TiC-reinforced steel matrix composites Wear 251 2001 1444 1451
8. L.A. Dobrzanski, M. Bonek, E. Hajduczek, and A. Klimpel Alloying the X40CrMoV5-1 steel surface layer with tungsten carbide by the use of a high power diode laser Appl. Surf. Sci. 247 2005 328 332
9. Ö.N. Dogan, J.A. Hawk, and J.H. Tylczak Wear of cast chromium steels with TiC reinforcement Wear 250 2001 462 469
10. A.M. Do Nascimento, V. Ocelik, M.C.F. Ierardi, and J. Th.M. de Hosson Microstructure of reaction zone in WC(p)/duplex stainless steels matrix composites processing by laser melt injection Surf. Coat. Technol. 202 2008 2113 2120
11. N. Eustathopoulos, M.G. Nicholas, and B. Drevet Wettability at High Temperatures 1999 Pergamon
12. E.R. Fábián, P. Boross, B. Ver, and P. Fülöp Metallographic aspects of surface treated steels by using laser technology Mater. Sci. Forum 414-415 2003 201 206
13. L.R. Farias, and G.A. Irons A unified approach to bubbling-jetting phenomena in powder injection into iron and steel Metall. Trans. 16B 1985 211 225
14. Fedorov, A.; 2005. Predictive modeling of forces for turning and milling with multi-edge tools. PhD Thesis. The University of Melbourne, Melbourne, Australia.
15. K. Feng, Y. Yang, B. Shen, and L. Guo In situ synthesis of TiC/Fe composites by reaction casting Mater. Des. 26 2005 37 40
16. R.K. Galgali, H.S. Ray, and A.K. Chakrabarti Preparation of TiC reinforced steel composites and their characterization Mater. Sci. Technol. 15 1999 437 442
17. GOST 5950-73. Alloyed tool steel. Russian Bureau of Standards, Moscow, 1973.
18. P. Iglesias, M.D. Bermudez, W. Moscoso, B.C. Rao, M.R. Chankar, and S. Chandrasekar Friction and wear of nanostructured metals created by large strain extrusion machining Wear 263 2007 636 642 (Pubitemid 47487405)
19. S. Kalpakjian Manufacturing Engineering and Technology 1995 Addison-Wesley Publ. Comp. Amsterdam
20. G. Kaptay, A. Lovas, F. Szigeti, P. Bárczy, and L. Bolyán Correlation between the abrasive ability of ceramic reinforced amorphous metal matrix composites and the adhesion energy between the amorphous matrix and the ceramic particles J. Mater. Sci. Eng. A 226-228 1997 1083 1088
21. G. Kaptay Modelling interfacial energies in metallic systems Mater. Sci. Forum 473-474 2005 1 10
22. T.Z. Kattamis, and T. Suganuma Solidification processing and tribological behavior of particulate TiC-ferrous matrix composites Mater. Sci. Eng. A 128 1990 241 252
23. S.A. Klimenko, Yu.A. Mukovoz, and G.Ch. Polonsky Cutting Tools of Superhard Materials//Advanced Ceramics for Machining Application 1996 Trans. Tech. Publications Switzerland
24. G. Králik, P. Fülöp, B. Ver, and D. Zsámbok Laser surface treatment of steels Mater. Sci. Forum 414-415 2003 21 30
25. K. Lee, D.H. Nam, S. Lee, and C.P. Kim Correlation of microstructure with hardness and wear resistance of surface composites fabricated by high-energy electron beam irradiation of Fe-based metamorphic powders Metall. Mater. Trans. A 37A 2006 1485 1494
26. 2-TiC reinforced steel matrix composites produced by spark plasma sintering J. Mater. Process. Technol. 210 2010 91 95
27. V.S. Lisanov Elbor in Machine Building 1978 St Petersburg (in Russian)
28. D. Liu, L. Li, F. Li, and Y. Chen WC(p)/Fe metal matrix composites produced by laser melt injection Surf. Coat. Technol. 202 2008 1771 1777
29. A.G. Mamalis, J. Kundrak, and M. Horvath Wear and tool life of CBN cutting tools Int. J. Manuf. Technol. 20 2002 475 479
30. M. Riabkina-Fishman, E. Rabkin, P. Levin, N. Frage, M.P. Dariel, A. Weisheit, R. Galun, and B.L. Mordike Laser produced functionally graded tungsten carbide coatings on M2 high-speed tool steels J. Mater. Sci. Eng. A 302 2001 106 114
31. M.C. Shaw Metal Cutting Principles 2nd ed. 2005 Oxford Science Publ.
32. L. St-Georges Development and characterization of composite Ni-Cr + WC laser cladding Wear 263 2007 562 566
33. D. Stephenson, and J. Agapiou Metal Cutting Theory and Practice 2006 CRC Press Boca Raton
34. F.W. Taylor On the art of cutting metals ASME Trans. 28 1907 31 35
35. B.S. Terry, and O.S. Chinyamakobvu In situ production of Fe-TiC composites by reactions in liquid iron alloys J. Mater. Sci. Lett. 10 1991 628 629
36. A.D. Uday, D. Dilip, and S.S. Joshi Modeling of chip-tool interface friction to predict cutting forces in machining of Al/SiCp composites Int. J. Mach. Tools Manu. 49 2009 690 700
37. S. Veprek, and M.J.G. Veprek-Heijman Industrial application of superhard composite coatings Surf. Coat. Technol. 202 2008 5063 5073
38. O. Verezub, G. Kaptay, T. Matsushita, and K. Mukai Penetration dynamics of solid particles into liquids. High-speed experimental results and modeling Mater. Sci. Forum 473-474 2005 429 434
39. O. Verezub, Z. Kalazi, G. Buza, N.V. Verezub, and G. Kaptay In-situ synthesis of a carbide reinforced steel matrix surface nanocomposite by laser melt injection technology and subsequent heat treatment Surf. Coat. Technol. 203 2009 3049 3057
40. J.A. Vreeling, V. Ocelik, G.A. Hamstra, Y.T. Pei, and J. Th.M. de Hosson In-situ microscopy investigation of failure mechanisms in Al/SiC(p) metal matrix composite produced by laser embedding Scr. Mater. 42 2000 589 595