On crystal plasticity formability analysis for magnesium alloy sheets

International Journal of Solids and Structures

Volumn 48, Issue 6, 2011, Pages 1000-1010

  Wang, H ^a   Wu, P D ^a   Boyle, K P ^b   Neale, K W ^c  

^a MCMASTER UNIVERSITY   (Canada)

^b CANMET MATERIALS TECHNOLOGY LABORATORY   (Canada)

^c UNIVERSITÉ DE SHERBROOKE   (Canada)

Author keywords

Crystal plasticity; Formability; Magnesium; Strain path change; Texture

Indexed keywords

BASAL TEXTURES; CRYSTAL PLASTICITY; CRYSTAL PLASTICITY MODELS; CRYSTALLOGRAPHIC STRUCTURE; EXPERIMENTAL OBSERVATION; FORMABILITY ANALYSIS; FORMING LIMIT DIAGRAMS; FORMING LIMIT STRESS DIAGRAM; FORMING LIMITS; HEXAGONAL CLOSE PACKED; LINEAR STRAINS; MAGNESIUM ALLOY SHEETS; NONPROPORTIONAL LOADING; NUMERICAL RESULTS; NUMERICAL SIMULATION; STRAIN PATH CHANGE; STRAIN SPACE; STRESS SPACE; TAYLOR MODELS; VISCO-PLASTIC SELF-CONSISTENT;

ALLOYS; CERIUM ALLOYS; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM PRINTING PLATES; METAL FORMING; PLASTICITY; POLYCRYSTALLINE MATERIALS; SHEET METAL; SINGLE CRYSTALS; TEXTURES;

COMPUTER SIMULATION;

EID: 79251594456     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2010.12.004     Document Type: Article

References (59)

1. S.R. Agnew, J.A. Horton, T.M. Lillo, and D.W. Brown Enhanced ductility in strongly textured magnesium produced by equal channel angular processing Scripta Materialia 50 2004 377 381
2. S.R. Agnew, M.H. Yoo, and C.N. Tomé Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y Acta Materialia 49 2001 4277 4289
3. R. Arrieux Determination and use of the forming limit stress diagrams in sheet metal forming Journal of Materials Processing Technology 53 1995 47 56
4. Arrieux, R.; Bedrin, C.; Boivin, M.; 1982. Determination of an intrinsic forming limit stress diagram for isotropic metal sheets. In: Proceedings of the 12th Biennial Congress IDDRG, pp. 61-71.
5. R.J. Asaro, and A. Needleman Texture development and strain hardening in rate dependent polycrystals Acta Metallurgica Et Materialia 33 1985 923 953
6. Y. Chino, H. Iwasaki, and M. Mabuchi Stretch formability of AZ31 Mg alloy sheets at different testing temperatures Materials Science and Engineering A 466 2007 90 95
7. Y. Chino, K. Sassa, and M. Mabuchi Enhancement of tensile ductility of magnesium alloy produced by torsion extrusion Scripta Materialia 59 2008 399 402
8. J.D. Eshelby The determination of the elastic field of an ellipsoidal inclusion, and related problems Proceedings of The Royal Society A 241 1957 376 396
9. A. Graf, and W.F. Hosford The influence of strain-path changes on forming limit diagrams of Al 6111 T4 International Journal of Mechanical Sciences 36 1994 897 910
10. S.S. Hecker Formability of aluminum alloy sheet Journal of Engineering Materials and Technology 97 1975 66 73
11. R. Hill A theory of the yielding and plastic flow of anisotropic metals Proceedings of the Royal Society of London A 193 1948 281 297
12. S. Hiwatashi, A. Van Bael, P. Van Houtte, and C. Teodosiu Prediction of forming limit strains under strain-path changes: application of an anisotropic model based on texture and dislocation structure International Journal of Plasticity 14 1998 647 669
13. Hosford, W.A.; 1979. On yield loci of anisotropic cubic metals. In: Proceedings of the 7th North American Metalworking Conference, SME, Dearborn, MI, pp. 191-197.
14. X.S. Huang, K. Suzuki, A. Watazu, I. Shigematsu, and N. Saito Mechanical properties of Mg-Al-Zn alloy with a tilted basal texture obtained by differential speed rolling Materials Science and Engineering A 488 2008 214 220
15. J.W. Hutchinson Bounds and self-consistent estimates for creep of polycrystalline materials Proceedings of the Royal Society of London A 348 1976 101 127
16. J.W. Hutchinson, and K.W. Neale Influence of strain-rate sensitivity on necking under uniaxial tension Acta Metallurgica 25 1977 839 846
17. K. Inal, K.W. Neale, and A. Aboutajeddine Forming limit comparisons for FCC and BCC sheets International Journal of Plasticity 21 2005 1255 1266
18. K. Inal, P.D. Wu, and K.W. Neale Instability and localized deformation in polycrystalline solids under plane strain tension International Journal of Solids and Structures 39 2002 983 1002
19. K. Inal, P.D. Wu, and K.W. Neale Finite element analysis of localization deformation in FCC polycrystalline sheets under plane stress tension International Journal of Solids and Structures 39 2002 3469 3486
20. A. Jain, and S.R. Agnew Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet Materials Science and Engineering A 462 2007 29 36
21. S.R. Kalidindi Incorporation of deformation twinning in crystal plasticity models Journal of the Mechanics and Physics of Solids 46 1998 267 290
22. T. Kikuma, and K. Nakajima Effects of the deforming conditions and mechanical properties on the stretch forming of steel sheets Transactions of the Iron and Steel Institute of Japan 11 1971 827 839
23. R. Knockaert, Y. Chastel, and E. Massoni Forming limits prediction using rate-independent polycrystalline plasticity International Journal of Plasticity 18 2002 231 247
24. M. Kuroda, and S. Ikawa Texture optimization of rolled aluminum alloy sheets using a genetic algorithm Materials Science and Engineering A 385 2004 235 244
25. M. Kuroda, and V. Tvergaard Effect of strain path change on limits to ductility of anisotropic metal sheets International Journal of Mechanical Sciences 42 2000 867 887
26. J.V. Laukonis, and A.K. Ghosh Effects of strain path changes on the formability of sheet metals Metallurgical Transactions A 9 1978 1849 1856
27. R.A. Lebensohn, and C.N. Tomé A self-consistent anisotropic approach for the simulation of plastic-deformation and texture development of polycrystals - application to zirconium alloys Acta Metallurgica Et Materialia 41 1993 2611 2624
28. R.A. Lebensohn, C.N. Tomé, and P.P. Castaneda Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations Philosophical Magazine 87 2007 4287 4322
29. J. Lévesque, K. Inal, K.W. Neale, and R.K. Mishra Numerical modeling of formability of extruded magnesium alloy tubes International Journal of Plasticity 26 2010 65 83
30. Z. Marciniak, and K. Kuczynski Limit strains in the process of stretch-forming sheet metal International Journal of Mechanical Sciences 9 1967 609 620
31. A. Molinari, G.R. Canova, and S. Ahzi A self-consistent approach of the large deformation polycrystal viscoplasticity Acta Metallurgica 35 1987 2983 2994
32. A. Molinari, and L.S. Tóth Tuning a self-consistent viscoplastic model by finite element results. Part I: Modeling Acta Metallurgica Et Materialia 42 1994 2453 2458
33. T. Mukai, M. Yamanoi, H. Watanabe, and K. Higashi Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure Scripta Materialia 45 2001 89 94
34. K.W. Neale, and E. Chater Limit strain predictions for strain-rate sensitive anisotropic sheets International Journal of Mechanical Sciences 22 1980 563 574
35. C.J. Neil, and S.R. Agnew Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B International Journal of Plasticity 25 2009 379 398
36. R.E. Reed-Hill, and W.D. Robertson Deformation of magnesium single crystals by nonbasal Slip Transactions of the AIME 209 1957 496 502
37. J.W. Signorelli, and M.A. Bertinetti On the role of constitutive model in the forming limit of FCC sheet metal with cube orientations International Journal of Mechanical Sciences 51 2009 473 480
38. J.W. Signorelli, M.A. Bertinetti, and P.A. Turner Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model International Journal of Plasticity 25 2009 1 25
39. T.B. Stoughton A general forming limit criterion for sheet metal forming International Journal of Mechanical Sciences 42 2000 1 27
40. T.B. Stoughton, and X. Zhu Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD International Journal of Plasticity 20 2004 1463 1486
41. G.I. Taylor Plastic strain in metals Journal of the Institute of Metals 62 1938 307 324
42. C.N. Tomé, R.A. Lebensohn, and U.F. Kocks A model for texture development dominated by deformation twinning - application to zirconium alloys Acta Metallurgica Et Materialia 39 1991 2667 2680
43. C.N. Tomé Self-consistent polycrystal models: a directional compliance criterion to describe grain interactions Modelling and Simulation in Materials Science and Engineering 7 1999 723 738
44. Y.C. Wang, and P. Mora Macroscopic elastic properties of regular lattices Journal of the Mechanics and Physics of Solids 56 2008 3459 3474
45. H. Wang, B. Raeisinia, P.D. Wu, S.R. Agnew, and C.N. Tomé Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet International Journal of Solids and Structures 47 2010 2905 2917
46. H. Wang, P.D. Wu, and M.A. Gharghouri Effects of basal texture on mechanical behaviour of magnesium alloy AZ31B sheet Materials Science and Engineering A 527 2010 3588 3594
47. H. Wang, P.D. Wu, C.N. Tomé, and Y. Huang A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials Journal of the Mechanics and Physics of Solids 58 2010 594 612
48. P. Ward Flynn, J. Mote, and J.E. Dorn On the thermally activated mechanism of prismatic slip in magnesium single crystals Transactions of the TMS-AIME 221 1961 1148 1154
49. P.D. Wu, A. Graf, M. Jain, and S.R. MacEwen On alternative representation of forming limits Key Engineering Materials 177-180 2000 517 522
50. P.D. Wu, A. Graf, S.R. MacEwen, D.J. Lloyd, M. Jain, and K.W. Neale On forming limit stress diagram analysis International Journal of Solids and Structures 42 2005 2225 2241
51. P.D. Wu, M. Jain, J. Savoie, S.R. MacEwen, P. Tugcu, and K.W. Neale Evaluation of anisotropic yield function for aluminum sheets International Journal of Plasticity 19 2003 121 138
52. P.D. Wu, D.J. Lloyd, M. Jain, K.W. Neale, and Y. Huang Effects of spatial grain orientation distribution and initial surface topography on sheet metal necking International Journal of Plasticity 23 2007 1084 1104
53. P.D. Wu, S.R. MacEwen, D.J. Lloyd, and K.W. Neale Effect of cube texture on sheet metal formability Materials Science and Engineering A 364 2004 182 187
54. P.D. Wu, S.R. MacEwen, D.J. Lloyd, and K.W. Neale A mesoscopic approach for predicting sheet metal formability Modelling and Simulation in Materials Science and Engineering 12 2004 511 527
55. P.D. Wu, K.W. Neale, and E. Van der Giessen On crystal plasticity FLD analysis Proceedings of the Royal Society of London A 453 1997 1831 1848
56. P.D. Wu, K.W. Neale, E. Van der Giessen, M. Jain, A. Makinde, and S.R. MacEwen Crystal plasticity forming limit diagram analysis of rolled aluminum sheets Metallurgical and Materials Transactions 29A 1998 527 535
57. K. Yoshida, T. Ishizaka, M. Kuroda, and S. Ikawa The effects of texture on formability of aluminum alloy sheets Acta Materialia 55 2007 4499 4506
58. L. Zhao, R. Sowerby, and M.P. Sklad A theoretical and experimental investigation of limit strains in sheet metal forming International Journal of Mechanical Sciences 38 1996 1307 1317
59. Y. Zhou, and K.W. Neale Predictions of forming limit diagrams using a rate-sensitive crystal plasticity model International Journal of Mechanical Sciences 37 1995 1 20