Strained Metallic Surfaces: Theory, Nanostructuring and Fatigue Strength

Strained Metallic Surfaces: Theory, Nanostructuring and Fatigue Strength

Volumn , Issue , 2009, Pages 1-250

  Levitin, Valim ^a   Loskutov, Stephan ^b  

^a NONE   (Germany)

^b NONE   (Ukraine)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 79251546585     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527626434     Document Type: Book

References (97)

1. J. M. BLAKELY, Introduction to the Properties of Crystal Surfaces. International Series on Materials Science and Technology, Vol.12, Pergamon Press, Oxford, 1973.
2. M. PRUTTON, Surface Physics, Second edition, Oxford Physics Series, Clarendon Press, Oxford, 1983.
3. A. ZANGWILL, Physics at Surfaces, Cambridge University Press, Cambridge-New York, 1988.
4. H. L ÜTH, Surfaces and Interfaces of Solids, Springer-Verlag, Berlin New-York, 2003.
5. A. KIEJNA, K. F. WOJCIECHOWSKI, Metal Surface Electron Physics, Elsevier Science, Oxford, 1996.
6. F. BECHSTEDT, Principles of Surface Physics, Springer-Verlag, Berlin-Heidelberg-New York, 2003.
7. J. VENABLES, Introduction to Surface and Thin Film Processes, Cambridge University Press, Cambridge, 2005.
8. D. MARX, Surfaces and Contact Mechanics, Center for Advanced Friction Studies, 2005. Web version.
9. R SHUTTLEWORTH, The surface tension of solids, Proc. Phys. Soc., A63, (1950), p. 444.
10. J. G. CHE, C. T. CHAN, W.-E. JIAN, T. C. LEUNG, Surface atomic structures, surface energies, and equilibrium crystal shape of molybdenum, Phys. Rev., B57, (1998), p. 1875.
11. L. VITOS, A. V. RUBAN, H. L. SKRIVER, J. KOLLAR, The surface energy of metals, Surf. Sci., 411, (1998), p. 186.
12. P. WYNBLATT, N. A. GJOSTEIN, A calculation of relaxation, migration and formation energies for surface defects in copper, Surf. Sci. 12 (1968), p. 109.
13. H. G. KILIAN, V. I. VETTEGREN, V. N. SVETLOV, Hierarchy of ensembles of defects on the strained surface in copper, Phys. Sol., 43 (2001), p. 2107.
14. B. LANG, R.W. JOYNER, G. A. SOMORJAI, LEED-Studien des Hohen Index Crystal Oberflächen von Platin, Surf. Sci., 30, (1972), p. 440.
15. V. V. LEVITIN, Atom Vibrations in Solids: Amplitudes and Frequencies, Cambridge Scientific Publishers, 2004.
16. M. P. SHEAN, W. A. DENCH, Compilation of experimental data determined with various electron energies for a large variety of materials, Surf. Interf. Anal., 1, (1979), p. 1.
17. R. W. JAMES, The Optical Principles of the Diffraction of X-Rays, Bell and Sons LTD, London, 1950.
18. G. MAEDER, X-ray diffraction and stress measurement, Chemica Scripta, 26A,(1986), p. 23.
19. P. S.Prevèy, X-ray Diffraction Residual Stress Techniques, Metals Handbook, 10, 380, Metals Park: American Society for Metals (1986).
20. B. E. WARREN, X-ray studies of deformed metals, Progress in Metal Physics, 8, Pergamon Press, Ld-NY, (1959).
21. J. FRIEDEL, Dislocations, Pergamon Press, Oxford-London, 1964.
22. D. P. WOODRUFF, T. A. DELCHAR, Modern Techniques of Surface Science, Cambridge University Press, Cambridge-London-New York, 1986.
23. V. V. LEVITIN, S. V. LOSKUTOV, M. I. PRAVDA, B. A. SERPETSKY, A technique for measurement of strained state of specimens, Patent No 99084748, Ukraine, J. Inventions, (2001), p 10.
24. W. LI, D. Y. LI, Effect of elastic and plastic deformations on the electron work function of metals during bending tests, Phil. Mag., 84 (2004), p. 3717.
25. W. LI, Y.WANG, D. Y. LI, Response of the electron work function to deformation and yielding behaviour of copper under different stress states, Phys.stat.sol., 201 (2004), p. 2005.
26. K. BESOCKE, B. KRAHL-URBAN, H.WAGNER, Dipole moments associated with edge atoms; a comparative study of stepped Pt, Au and W surfaces, Surf. Sci., 68 (1977), p. 39.
27. M. PIVETTA, F. PATTHEY, W.-D. SCHNEIDER, B. DELLEY, Surface distribution of Cu adatoms deduced from work function measurements, Phys. Rev. B, 65, 045417 (2002), p. 1.
28. A. M. KUZNECOV, Adsorption of water on metallic surfaces, The Soros Edu. Journ., 6, (2000), p. 45.
29. V. S. FOMENKO, Emission Properties of Elements and their Compounds, Naukova Dumka, Kiev, 1980.
30. V. V. LEVITIN, S. V. LOSKUTOV, V. V. POGOSOV, The effect of strain and residual stresses in metals on the electron work function, Phys. Met. Metall., 70, (1990), p. 73.
31. N. W. ASHKROFT, D. C. LANGRETH, Compressibility and binding energy of simple metals, Phys. Rev., 155, 3, (1967), p. 682.
32. P. M. KOBELEVA, B. R. GELCHINSKY, V. F. UHOV, On calculation of the surface energy of metals in the positive charge model, Phys. Met. Metall, 45, (1978), 1, p. 25.
33. V. F. UHOV, R.M. KOBELEVA, G. V. DEDKOV, L. I. TERMOKOV, Electron Statistic Theory of Metals and Ionic Crystals, Nauka, Moscow, 1982.
34. F. JONA, Re-examination of the structure of the clean surface of Al, Solid State Phys., 10, (1977), 17, p. 619.
35. F. JONA, D. SONDERICHER, P.M.MARCUS, Al (111) revisited, J. Phys. C, 13, (1980), p. L155.
36. A. BIANCONI, R. C. BACKRACH, Al surface relaxation using surface extended X-ray absorbtion. Fine structure, Phys. Rev. Lett., 79, (1979), p. 104.
37. E. P. GIFTOPOULOS, C. N. RATSOPULOS, The quantum thermodynamic definition of electronegativity and work function, Proc. Second Int. Conf. on Thermion. Electrical Power Generation, Stresa, Italy, (1968), p.1249.
38. V. I. VETTERGREN, V. L. GILIAROV, S. SH. RAHIMOV, V. N. SVETLOV, Mechanism of the defect formation on the loaded surface in metals, Phys.sol., 40 (1998), p. 668.
39. L. A. RUDNITSKY, Electron work function for nonideal surface of metals, II. Stepped surface and surface of microscopic granules, J. Techn. Phys., 50, (1980), p. 355.
40. L. A. RUDNITSKY, Some surface and bulk properties of solids in terms of electronegativity, J. Phys. Chem., 53, (1979), p. 3003.
41. G. A. MALYGIN, Mechanism of formation of the nanometric deformation steps on the surface of plastic deformed metals, Phys.sol., 43 (2001), p. 248.
42. H. G. KILIAN, V. I. VETTEGREN, V. N. SVETLOV, Ensembles of defects on the strained surface of metals as a result of a reversible aggregation, Phys. Sol., 42, (2000), p. 2024.
43. R. I. MINC, V. P.MELEHIN, V. S. KORTOV, U. D. SEMKO, The variation in the work function during tension of copper and aluminum, Proc. Inst. High. Educ., Non-ferrous Met., (1969), p. 113.
44. L. D. LANDAU, E. M. LIFSHIZ, Theory of Elasticity, Pergamon,Oxford, 1986.
45. J. H. UNDERWOOD, G. R. O'HARA, J. J. ZALINKA, Analiysis of elastic-plastic, ball indentation to measure strength of high-strength steels, Exper. Mechanics, 26, (1986), p. 379.
46. M. SCHERGE, D. SHAKHVOROSTOV, K. PÖHLMANN, Fundamental wear mechanism of metals, Wear 255, (2003), p. 395.
47. T. KASAI, X. Y. FU, D. A. RIGNEY, A. L. ZHARIN, Applications of a noncontacting Kelvin probe during sliding, Wear, 225-229, (1999), p. 1186.
48. I. GARBAR, Microstructural changes in surface layers of metal during running-up friction processes, Meccanica, 36, (2001), p. 631.
49. Z. B. WANG, N. R. TAO, S. LI, W. WANG, G. LIU, J. LU, K. LU, Effect of surface nanocrystallisazion on friction and wear properties in low carbon steel, Mater. Sci. Eng., A352, (2003), p. 144.
50. Y. LI, D. Y. LI, Prediction of elastic-contact friction of transition metals under light loads based on their electron work function, J. Phys. D:Appl. Phys., 40, (2007), p. 5980.
51. W. G. JOHNSTON, J. J. GILMAN, Dislocation velocities, dislocation densities, and plastic flow in lithium fluoride crystals, J. Appl. Phys., 30 (1959), p. 129.
52. H. WIEDERSICH, A quantitative theory for the dislocation multiplication during the early stages of the formation of glide bands, J. Appl. Phys., 33 (1962), p. 854.
53. L. MATOHNYUK, Accelerated Fatigue Tests, Naukova Dumka, Kiev 1988.
54. S. A. TEUKOLSKY, W. T. VETTERLING, W. H. PRESS, B. P. FLANNARY, Numerical Recipes in Fortran, Cambridge University Press, Cambridge, 1999.
55. V. LEVITIN, High Temperature Strain of Metals and Alloys, Wiley-VCH Verlag GmbH, Weinheim, 2006.
56. A. V. KULEMIN, V. V. KONONOV, I. A. STEBELKOV, On a choice of an optimal regime of the material hardening in an ultrasonic field, Phys. Chem. Mat. Treat., (1982), p. 93.
57. V. K. YATSENKO, G. Z. ZAYZEV, V. F. PRITCHENKO, L. I. IVSHENKO, Increase in the Load-Carrying Ability of Components by the Diamand Smoothing, Machine-Building, Moscow, 1985.
58. G. V. PUHALSKA, A. D. KOVAL, L. P. STEPANOVA, Technological peculiarities of formation of the surface layer properties for compressor blades, New Mater. Techn. Met. Mach., 1, (2006), p. 47.
59. M. A. S. TORRES, H. J. C. VOORWALD, An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel, Int. J. Fatig., 24, (2002), p. 877.
60. G. A. WEBSTER, A. N. EZELIO, Residual stress distributions and their influence on fatigue lifetimes, Int. J. Fatig., 23, (2001), p. S375.
61. L. WAGNER, Mechanical surface treatments on titanum, aluminum and magnesium alloys, Mater. Sci. Eng., A263, (1999), p. 210.
62. T. ROLAND, D. RETRAINT, K. LU, J. LU, Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment, Scripta Mater. 54, (2006), p. 1949.
63. R. K. NALLA, I. ALTENBERGER, U. NOSTER, G. Y. LIU, B. SCHOLTES, R. O. RITCHIE, On the influence of mechanical surface treatments - deep rolling and laser shock peening - on the fatigue behaviour of Ti-6Al-4V at ambient and elevated temperatures, Mater. Sci. Eng., A355, (2003), p. 216.
64. A. VINOGRADOV, S. HASHIMOTO, V. I. KOPYLOV, Enhanced strength and fatigue life of ultra-fine grain Fe-36Ni Invar alloy, Mater. Sci. Eng., A355, (2003), p. 277.
65. H. GUECHICHI, L. CASTEX, Fatigue limits prediction of surface treated materials, J. Mater. Proc. Techn., 172, (2006), p. 381.
66. M. N. JAMES, D. J. HUGHES, Z. CHEN, H. LOMBARD, D. G. HATTINGH, D. ASQUITH, J. R. YATES, P. J. WEBSTER, Residual stresses and fatigue performance, Eng. Fail. Anal., (2006), p. 1.
67. J. D. ALMER, J. B. COHEN, B.MORAN, The effects of residual macrostresses on fatigue crack initiation, Mat. Sci. Eng., A284, (2000), p. 268.
68. T. ROLAND, D. RETRAINT, K. LU, J. LU, Enhanced mechanical behavior of a nanocrystallised stainless steel and its thermal stability, Mater. Sci. Eng., A 445-446, (2007), p. 281.
69. I. NIKITIN, I. ALTENBERGER, H. J.MAIER, B. SCHOLTES, Mechanical and thermal stability of mechanically induced nearsurface nanostructures, Mater. Sci. Eng., A403, (2005), p. 318.
70. U. KRUPP, Fatigue Crack Propagation in Metals and Alloys, Willey-VCH Verlag GmbH, Weinheim, 2007.
71. S. SURESH, Fatigue of Materials, Cambridge University Press, Cambridge, 1998.
72. G. R. IRWIN, Onset of fast crack propagation in high strength steel and aluminum Proc. Sec. Sagamore Conf., 2, N-Y, Syracuse University, 1956, p. 289.
73. P. C. PARIS, M. P. GOMEZ, W. P. ANDERSON, A rational analytic theory of fatigue, The Trend. Eng. 13, (1961), p. 9.
74. ASTM STANDART E-647, Annual book of ASTM standards 0.3.01, (1990), p. 642.
75. L. BARTOSIEWICZ, A. R. KRAUSE, A. SENGUPTA, S. K. PUTATUNDA, Application of a new model for fatigue threshold in a structural steel weldment, Eng. Frac. Mech., 45, (1993), p. 463.
76. M. KARIMI, T. ROARTY, T. KAPLAN, Molecular dynamics simulations of crack propagation in Ni with defects, Modelling Simul. Mater. Sci. Eng., 14, (2006), p. 1409.
77. D. L. DAVIDSON, The growth of fatigue cracks through particulate SiC reinforced aluminum alloys, Eng. Frac. Mech., 33, (1989), p. 965.
78. J. SCHIJVE, Fatigue of structures and materials in the 20th century and the state of the art, Int. J. Fatig., 25, (2003), p. 679.
79. J. P. HIRTH, J. LOTHE, Theory of Dislocations, Second Edition, Krieger, Malabar, Florida, 1992.
80. XU-DONG LI, L. EDWARDS, Theoretical modelling of fatigue threshold for aluminum alloys, Eng. Frac. Mech., 54, (1996), p. 35.
81. T. MURA, A theory of fatigue crack initiation, Mater. Sci. Eng., A176, (1994), p. 61.
82. D. M. NISSLEY, Thermomechanical fatigue life prediction in gas turbine superalloys: a fracture mechanics approach, Amer. Inst. Aeron. Astron. Journ., 33, (1995), p. 1114.
83. W. W. MILLIGAN, S. D. ANTOLOVICH, The mechanisms and temperature dependence of superlattice stacking fault formation in the single crystal superalloy PWA 1480, Met. Trans. A, 22A, (1991), p. 2309.
84. J. S. KOEHLER, On the dislocation theory of plastic deformation, Phys. Rev., 60, (1941), p. 397.
85. A. H. COTTRELL, D. HULL, Extrusion and intrusion by cyclic slip in copper, Proc. Royal Soc., 242, (1957), p. 211.
86. M. TOPARLI, A. ÖZEL, T. AKSOY, Effect of the residual stresses on the fatigue crack growth behavior at fastener holes, Mater. Sci. Eng., A225, (1997), p. 196.
87. J. E. LARUE, S. R. DANIEWICZ, Predicting the effect of residual stress on fatigue crack growth, Int. J. Fatig., 29, (2007), p. 508.
88. B. S. BOKSTEIN, Diffusion in Metals, Metallurgy, Moscow, 1978.
89. J. SCHIJVE, Fatigue predictions and scatter, Fatigue Fract. Eng. Mater. Struc., 17, (1994), p. 381.
90. S. V. LOSKUTOV, The effect of strain on the structure and on the energetic state of surface layers in metals, PhD thesis, Institute for Metal Physics, NASU, Kiev, 2005.
91. K. OKAZAKI, M. KAGAWA, H. CONRAD, A study of the electroplastic effect, Scripta Metal., 16, (1978), p. 1063.
92. V. I. SPICYN, O. A. TROICKY, Electroplastic Deformation of Metals, Nauka, Moscow, 1985.
93. S. L. LIVESAY, X. DUAN, R. PRIESTNER, J. COLINS, An electroplastic effect in 3.25 % silicon steel, Scripta Metal., 44, (2001), 5, p. 803.
94. S. MROWEC, Defects and Diffusion in Solids, Elsevier Scientific Publishing Company, Oxford-N.-Y., 1980.
95. V. V. POGOSOV, V. V. LEVITIN, S. V. LOSKUTOV, On strain-emission phenomenon in metals, Let. J. Tech. Phys, 16, (1990), p. 14.
96. FRANÇOIS CARDARELLI, Materials Handbook, Springer, London, 2007.
97. W. MISSOL, Calculation of the surface energy of solid metals from work function values and electron configuration data, Phys.stat.sol.(b), 58, (1973), p. 767.