Rheological and morphological properties of phosphorus-containing polysulfones

Polymer - Plastics Technology and Engineering

Volumn 50, Issue 1, 2011, Pages 36-46

  Ioan, Silvia ^a   Buruiana, Luminita Ioana ^a   Petreus, Oana ^a   Avram, Ecaterina ^a   Stoica, Iuliana ^a   Ioanid, Ghiocel Emil ^a  

^a PETRU PONI INSTITUTE OF MACROMOLECULAR CHEMISTRY   (Romania)

Author keywords

Hydrophobicity; Modified polysulfones; Rheology; Surface morphology

Indexed keywords

INTRAMOLECULAR INTERACTIONS; LOW ADHESION; MODIFIED POLYSULFONES; MORPHOLOGICAL PROPERTIES; PENDANT GROUPS; POOR ADHESION; SUBSTITUTION DEGREE;

ADHESION; ATOMIC FORCE MICROSCOPY; CHEMICAL MODIFICATION; ELASTICITY; HYDROPHOBICITY; MORPHOLOGY; PHOSPHORUS; RHEOLOGY; SURFACE TENSION; VISCOSITY;

SURFACE MORPHOLOGY;

EID: 78751612285     PISSN: 03602559     EISSN: 15256111     Source Type: Journal    
DOI: 10.1080/03602559.2010.512346     Document Type: Article

References (64)

1. Barikani, M.; Mehdipour-Ataei, S. Synthesis, characterization, and thermal properties of novel arylene sulfone ether polyimides and polyamides. J. Polym. Sci. Part A: Polym. Chem. 2000, 38, 1487.
2. Väisänen, P.; Nyström, M. Comparison of polysulfone membranes and polysulfone films. Acta Polytechnica Scandinavica 1997, 247, 25.
3. Higuchi, A.; Iwata, N.; Tsubaki, M.; Nakagawa, T. Surface-modified polysulfone hollow fiber. J. Appl. Polym. Sci. 1988, 36, 1753.
4. Higuchi, A.; Nakagawa, T. Surface modified polysulfone hollow fibers. III. Fibers having a hydroxide group. J Appl Polym Sci. 1990, 41, 1973.
5. Higuchi, A.; Koga, H.; Nakagawa, T. Surface-modified polysulfone hollow fibers. IV. Chloromethylated fibers and their derivatives. J. Appl. Polym. Sci. 1992, 46, 449.
6. Johnson, R.N. Polysulfones. Plastics, Resins, Rubbers, Fibers. In: Herman, F.M.; Norman, G.G.; Bikales, M.N., eds. Encyclopedia of Polymer Science and Technology, Wiley: New York, 1969, 447.
7. Higuchi, A.; Shirano, K.; Harashima, M.; Yoon, B.O.; Hara, M.; Hattori, M.; Imamura, K. Chemically modified polysulfone hollow fibers with vinylpyrrolidone having improved blood compatibility. Biomaterials 2002, 23, 2659.
8. Tomaszewska, M.; Jarosiewicz, A.; Karakulski, K. Physical and chemical characteristics of polymer coatings in CRF formulation. Desalination 2002, 146, 319.
9. Sotiroiu, K.; Pispas, S.; Hadjichristidis, N. Effect of the endpositioning of a lithium sulfonate group on the aggregation and micellization behaviour of x-lithium sulfonate polystyreneblockpolyisoprenes. Macromol. Chem. Phys. 2004, 205, 55.
10. Ismail, A.F.; Hafiz, W.A. Effect of polysulfone concentration on the performance of membrane-assisted lead acid battery. J. Sci. Technol. 2002, 24, 815.
11. Zhang, A.; Li, X.; Nan, C.; Hwang, K. Facile modifications of a polyimide via chloromethylation. I. Novel synthesis of a new photosensitive polyimide. J. Polym. Sci. Pt. A: Polym. Chem. 2003, 41, 22.
12. Savariar, S.; Underwood, G.S.; Dickinson, E.M.; Schielke, P.J.; Hay, A.S. Polysulfone with lower levels of cyclic dimer: Use of MALDI-TOF in the study of cyclic. Desalination 2002, 144, 15.
13. Ydens, I.; Moins, S.; Degée, P.; Dubois, P. Solution properties of well-defined 2-(dimethylamino)ethyl methacrylate-based (co) polymers: A viscometric approach. Eur. Polym. J. 2005, 41, 1502.
14. Avram, E.; Butuc, E.; Luca, C.; Druta, I. Polymers with pendant functional group. III. Polysulfones containing viologen group. J. Macromol. Sci. Pt. A: Pure Appl. Chem. 1997, 34, 1701.
15. Cozan, V.; Avram, E. Side chain thermotropic liquid crystalline polysulfone obtained from polysulfone Udel by chemical modification. Eur. Polym. J. 2003, 39, 107.
16. Racles, C.; Avram, E.; Marcu, M.; Cozan, V.; Cazacu, M. New siloxane-ester modified polysulfones by phase transfer catalysis. Polymer 2000, 41, 8205.
17. Guiver, M.D.; Black, P.; Tam, C.M.; Deslandes, Y. Functionalized polysulfone membranes by heterogeneous lithiation. J. Appl. Polym. Sci. 1993, 48, 1597.
18. Park, J.Y.; Acar, M.H.; Akthakul, A.; Kuhlmann, W.; Mayes A.M. Polysulfone-graft-poly (ethylene glycol) graft copolymers for surface modification of polysulfone membranes. Biomaterials 2006, 27, 856.
19. Wavhal, D.S.; Fisher, E.R. Hydrophilic modification of polyethersulfone membrane by low temperature plasma-induced graft polymerization. J. Membr. Sci. 2002, 209, 255.
20. Song, Y.Q.; Sheng, J.; Wei, M.; Yuan, X.B. Surface modification of polysulfone membranes by low-temperature plasma-graft poly (ethylene glycol) onto polysulfone membranes. J. Appl. Polym. Sci. 2000, 78, 979.
21. Iwata, H.; Ivanchenko, M.I.; Miyaki, Y. Preparation of anti-oil stained membrane by grafting polyethylene glycol macromer onto polysulfone membrane. J. Appl. Polym. Sci. 1994, 54, 125.
22. Perez, R.M.; Sandler, J.K.W.; Altstädt, V.; Hoffmann, T.; Pospiech, D.; Ciesielski, M.; Dö ring, M.; Balabanovich, A.I.; Schartel, B. Novel phosphorus-modified polysulfone as a combined flame retardant and toughness modifier for epoxy resins. Polymer 2007, 48, 778.
23. Hoffmann, T.; Pospiech, D.; Häubler, L.; Komber, H.; Voigt, D.; Harnisch, C.; Kollann, C.; Ciesielski, M.; Döring, M.; Perez-Graterol, R.; Sandler, J.; Altstädt, V. Novel phosphorous-containing aromatic polyethers-synthesis and characterization. Chem. Phys. 2005, 206, 423.
24. Wu, C.S.; Liu, Y.L.; Chiu, Y.S. Preparation of phosphoruscontaining poly (epichlorohydrin) and polyurethane from a novel synthesis route. J. Appl. Polym. Sci. 2002, 85, 2254.
25. Avram, E. Polym.-Plast. Polymers with pendant functional groups. IV. A comparative study on the chloromethylation of linear polystyrene and polysulfone withparaformaldehyde=Me3SiCl. Technol. Eng. 2001, 40, 275.
26. Luca, C.; Avram, E.; Petrariu, I. Quaternary ammonium polyelectrolytes. V. Amination studies of chloromethylated polystyrene with N,N-dimethylalkylamines. J. Macromol. Sci., Pt. A: Chem. 1988, 25, 345.
27. Ghimici, L.; Avram, E. Viscometric behaviour of quaternized polysulfones. J. Appl. Polym. Sci. 2003, 90, 465.
28. Ioan, S.; Filimon, A.; Avram, E. Influence of the degree of substitution on the solution properties of chloromethylated polysulfone. J. Appl. Polym. Sci. 2006, 101, 524.
29. Ioan, S.; Filimon, A.; Avram, E. Conformational and viscometric behaviour of quaternized polysulfone in dilute solution. Polym. Eng. Sci. 2006, 46, 827.
30. Filimon, A.; Avram, E.; Ioan, S. Influence of mixed solvents and temperature on the solution properties of quaternized polysulfones. J. Macromol. Sci., Pt. B: Phys. 2007, 46, 503.
31. Ioan, S.; Filimon, A.; Avram, E. Influence of substitution degree to the optical properties of chloromethylated polysulfone. J. Macromol. Sci., Pt. B Phys. 2005, 44, 129.
32. Ioan, S.; Filimon, A.; Avram, E.; Ioanid, G. Effects of chemical structure and plasma treatment on the surface properties of polysulfones. e-Polymers 2007, 031, 1.
33. Filimon, A.; Avram, E.; Ioan, S. Specific interactions in ternary system quaternized polysulfone=mixed solvent. Polym. Eng. Sci. 2009, 49, 17.
34. Filimon, A.; Avram, E.; Dunca, S.; Stoica, I.; Ioan, S. Surface properties and antibacterial activity of quaternized polysulfones. J. Appl. Polym. Sci. 2009, 112, 1808.
35. Petreus, O.; Avram, E.; Serbezeanu, D. Synthesis and characterization of phosphorus- containing polysulfone. Polym. Eng. Sci. 2010, 50, 48.
36. Marinov, V.R. Electrical resistence of laser sintered direct-write deposited materials for microelectronic applications. J Microelectron. Electron. Pack. 2004, 1, 261.
37. Grigorescu, G.; Kulicke, W.M. Prediction of viscoelastic properties and shear stability of polymers in solution. Adv. Polym. Sci. 2000, 152, 1.
38. Bicerano, J. Prediction of the properties of polymer from thir structures. J. M. S. - Rev. Macromol. Chem. Phys. 1996, 36, 161.
39. de Vasconcelos, C.L.; Martins, R.R.; Ferreira, M.O.; Pereira, M.R.; Fonseca, J.L.C. Rheology of polyurethane solutions with different solvents. Polym. Int. 2001, 69, 51.
40. Hirai, N.; Eyring, H. Bulk viscosity of liquids. J Appl. Phys. 1958, 29, 810.
41. Gupta, K.; Yaseen, M. Viscosity-temperature relationship of dilute solution of poly(vinyl chloride) in cyclohexanone and in its blends with xylene. J. Appl. Polym. Sci. 1997, 65, 2749.
42. Griswold, P.D.; Cuculo, J.A. An experimental study of the relationship between rheological properties and spinnability in the dry spinning of cellulose acetateacetone solutions. J. Appl. Polym. Sci. 1974, 18, 2887.
43. Ikeda, S.; Nishinari, K. Weak-gel-type rheological properties of aqueous dispersions of nonaggregated K-Carrageenan helices. J. Agric. Food Chem. 2001, 49, 4436.
44. Tsitsilianis, C. Viscoelastic properties of physical gels formed by associative telechelic polyelectrolytes in aqueous media. Macromolecules 2002, 18, 3662.
45. Sato, T.; Watanabe, H.; Osaki, K. Thermoreversible physical gelation of block copolymers in a selective solvent. Macromolecules 2000, 33, 1686.
46. Iiyina, E.; Daragan, V. Self-diffusion of dimethyl sulfoxide and dimethylformamide in solutions and gels of cellulose acetates by pulsed field gradient NMR. Macromolecules 1994, 27, 3759.
47. Itagaki, H.; Tokai, M. Physical gelation process for cellulose whose hydroxyl groups are regioselectively substituted by fluorescent groups. Polymer 1997, 38, 4201.
48. Owens, D.K.; Wendt, R.C. Estimation of the surface free energy of polymers. J. Appl. Polym. Sci. 1969, 13, 1741.
49. Rabel, W. Flüssigkeitsgrenzflächen in theorie und anwendungstechnik. Physikalische Blätter 1977, 33, 151.
50. Kälble, D.H. Peel adhesion: Influence of surface energies and adhesive rheology. J. Adhes. 1969, 1, 102.
51. van Oss, C.J.; Good, R.J.; Chaudhury M.K. Aditive and nonadditive surface tension components and the interpretation of contact angles. Langmuir 1988, 4, 884.
52. van Oss, C.J.; Ju, L.; Chaudhury, M.K.; Good, R.J. Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems. Chem. Rev. 1988, 88, 927.
53. van Oss, C.J. Interfacial Forces in Aqueous Media, Marcel Dekker: New York, 1994.
54. van Oss, C.J.; Ju, L.; Chaudhury, M.K.; Good, R.J. Estimation of the polar parameters of the surface tension of liquids by contact angle measurements on gels. J. Coll. Interf. Sci. 1989, 128, 313.
55. Ström, G.; Fredriksson, M.; Stenius, P. Contact angles, work of adhesion, and interfacial tensions at a dissolving hydrocarbon surface. J. Coll. Interf. Sci. 1987, 119, 352.
56. Erbil, H.Y. Surface Tension of Polymers. In: Birdi, K.S., ed. Handbook of Surface and Colloid Chemistry, CRC Press: Boca Raton, 1997; 265.
57. Gonzalez-Martin, M.L.; Janczuk, B.; Labajos-Broncano, L.; Brunque, J.M. Determination of the carbon black surface free energy components from the heat of immersion measurements. Langmuir 1997, 13, 599.
58. Good, R.J.; van Oss, C.J. In: Schrader, M.E.; Loeb, G.I., eds. Modern Approaches to Wettability: Theory and Applications, Plenum Press: New York, 1992.
59. Wu, W.; Giese Jr., R.F.; van Oss, C.J. Evaluation of the Lifshitz-Van der Waals=acid-base approach to determine surface tension components. Langmuir 1995, 11, 379.
60. Della Volpe, C.; Maniglio, D.; Brugnara, M.; Siboni, S.; Morra, M. The solid surface free energy calculation: in defense of the multicomponent approach. J. Coll. Interfa. Sci. 2004, 271, 434.
61. Kwok, D.Y.; Ng, H.; Neumann, A.W. Experimental study on contact angle patterns: liquid surface tensions less than solid surface tensions. J. Coll. Interf. Sci. 2000, 225, 323.
62. Faibish, R.S.; Yoshida, W.; Cohen, Y. Contact angle study on polymer-grafted silicon wafers. J. Coll. Interf. Sci. 2002, 256, 341.
63. Dourado, F.; Gama, F.M.; Chibowski, E.; Mota, M. Characterization of cellulose surface free energy. J. Adhes. Sci. Technol. 1998, 12, 1081.
64. van Oss, C.J.; Giese, R.F. The hydrophilicity and hydrophobicity of clay minerals. Clay Clay Miner. 1995, 43, 474.