-
1
-
-
78751574739
-
An integrated approach to the superplastic forming of lightweight alloys: Towards sustainable manufacturing
-
F.K. Abu-Farha, and M.K. Khraisheh An integrated approach to the superplastic forming of lightweight alloys: towards sustainable manufacturing Int. J. Sustainable Manuf. 1 2008 18 40
-
(2008)
Int. J. Sustainable Manuf.
, vol.1
, pp. 18-40
-
-
Abu-Farha, F.K.1
Khraisheh, M.K.2
-
3
-
-
84898945672
-
State of the art, visions & priorities in research & development on metal forming
-
Altan, T.; Aue-u-lan, Y.; Palaniswamy, H.; Kaya, S.; 2005. State of the art, visions & priorities in research & development on metal forming. In: Proceedings of ICTP Conference.
-
(2005)
Proceedings of ICTP Conference
-
-
Altan, T.1
Aue-U-Lan, Y.2
Palaniswamy, H.3
Kaya, S.4
-
7
-
-
72849134258
-
-
AlcanAluminum Association, European Aluminium Association and International Aluminium Institute
-
M. Bertram, K. Buxmann, R. Chase, P. Furrer, B. Gilmont, J. Hannagan, K. Martchek, P. Morton, and G. Rebitzer Improving Sustainability in the Transport Sector through Weight Reduction and the Application of Aluminium 2007 AlcanAluminum Association, European Aluminium Association and International Aluminium Institute www.worldaluminium.org
-
(2007)
Improving Sustainability in the Transport Sector Through Weight Reduction and the Application of Aluminium
-
-
Bertram, M.1
Buxmann, K.2
Chase, R.3
Furrer, P.4
Gilmont, B.5
Hannagan, J.6
Martchek, K.7
Morton, P.8
Rebitzer, G.9
-
8
-
-
67349152662
-
Analysis of greenhouse gas emissions related to aluminum transport applications
-
M. Bertram, K. Buxmann, and P. Furrer Analysis of greenhouse gas emissions related to aluminum transport applications Int. J. Life Cycle Asses. 14 2009 62 69
-
(2009)
Int. J. Life Cycle Asses.
, vol.14
, pp. 62-69
-
-
Bertram, M.1
Buxmann, K.2
Furrer, P.3
-
10
-
-
27344435934
-
Stamping formability of pure titanium sheets
-
F. Chen, and K. Chiu Stamping formability of pure titanium sheets J. Mater. Process Technol. 2005 181 186
-
(2005)
J. Mater. Process Technol.
, pp. 181-186
-
-
Chen, F.1
Chiu, K.2
-
11
-
-
47049124720
-
LCA of magnesium production technological overview and worldwide estimation of environmental burdens
-
F. Cherubini, M. Raugei, and S. Ulgiati LCA of magnesium production technological overview and worldwide estimation of environmental burdens Resour. Conserv. Recycl 52 2008 1093 1100
-
(2008)
Resour. Conserv. Recycl
, vol.52
, pp. 1093-1100
-
-
Cherubini, F.1
Raugei, M.2
Ulgiati, S.3
-
12
-
-
33645102827
-
Mechanical properties of AZ31 Mg alloy recycled by severe deformation
-
Y. Chino, T. Hoshika, J.S. Lee, and M. Mabuchi Mechanical properties of AZ31 Mg alloy recycled by severe deformation J. Mater. Res. 2006 754 760
-
(2006)
J. Mater. Res.
, pp. 754-760
-
-
Chino, Y.1
Hoshika, T.2
Lee, J.S.3
Mabuchi, M.4
-
13
-
-
33749061508
-
Enhanced corrosion properties of pure Mg and AZ31Mg alloy recycled by solid-state process
-
Y. Chino, T. Hoshika, and M. Mabuchi Enhanced corrosion properties of pure Mg and AZ31Mg alloy recycled by solid-state process Mater. Sci. Eng. A. 435-437 2006 275 281
-
(2006)
Mater. Sci. Eng. A.
, vol.435-437
, pp. 275-281
-
-
Chino, Y.1
Hoshika, T.2
Mabuchi, M.3
-
14
-
-
56349148480
-
Primary magnesium production costs for automotive applications
-
S. Das Primary magnesium production costs for automotive applications JOM J. Miner.; Met. Mater. Soc. 60 2008 63 69
-
(2008)
JOM J. Miner.; Met. Mater. Soc.
, vol.60
, pp. 63-69
-
-
Das, S.1
-
15
-
-
70649115454
-
Life cycle greenhouse gases, energy and cost assessment of automobiles using magnesium from Chinese Pidgeon process
-
J. Du, W. Han, and Y. Peng Life cycle greenhouse gases, energy and cost assessment of automobiles using magnesium from Chinese Pidgeon process J. Clean. Prod. 18 2010 112 119
-
(2010)
J. Clean. Prod.
, vol.18
, pp. 112-119
-
-
Du, J.1
Han, W.2
Peng, Y.3
-
20
-
-
0242607929
-
Recycling of aluminum alloy and aluminum matrix composite chips by pressing and hot extrusion
-
J.B. Fogagnolo, E.M. Ruiz-Navas, M.A. Simón, and M.A. Martinez Recycling of aluminum alloy and aluminum matrix composite chips by pressing and hot extrusion J. Mater. Process Technol. 143-144 2003 792 795
-
(2003)
J. Mater. Process Technol.
, vol.143-144
, pp. 792-795
-
-
Fogagnolo, J.B.1
Ruiz-Navas, E.M.2
Simón, M.A.3
Martinez, M.A.4
-
23
-
-
0029534220
-
Towards clean forming techniques
-
M. Geiger Towards clean forming techniques CIRP Ann. Manuf. Technol. 44 1995 581 588
-
(1995)
CIRP Ann. Manuf. Technol.
, vol.44
, pp. 581-588
-
-
Geiger, M.1
-
26
-
-
0342733515
-
The recycling of metals by plastic deformation: An example of recycling of aluminum and its alloys chips
-
J. Gronostajski, and A. Matuszak The recycling of metals by plastic deformation: an example of recycling of aluminum and its alloys chips J. Mater. Process Technol. 92-93 1999 35 41
-
(1999)
J. Mater. Process Technol.
, vol.9293
, pp. 35-41
-
-
Gronostajski, J.1
Matuszak, A.2
-
28
-
-
78751568962
-
Direct recycling of 1050 aluminum alloy scrap material mixed with 6060 aluminum alloy chips by hot extrusion
-
Güley, V.N.; Khalifa, B.; Tekkaya, A.E. 2010. Direct recycling of 1050 aluminum alloy scrap material mixed with 6060 aluminum alloy chips by hot extrusion. In: Proceedings of Esaform Conference.
-
(2010)
Proceedings of Esaform Conference
-
-
Güley . V, N.1
Khalifa, B.2
Tekkaya . A, E.3
-
31
-
-
0003424713
-
-
Scientific BackgroundInstitute, Background, Institute for Product development, Chapman and Hall
-
M. Hauschild, and H. Wenzel Environmental Assessment of Products vol. 2 1997 Scientific BackgroundInstitute, Background, Institute for Product development, Chapman and Hall
-
(1997)
Environmental Assessment of Products
, vol.2
-
-
Hauschild, M.1
Wenzel, H.2
-
32
-
-
32044456224
-
From life cycle assessment to sustainable production: Status and perspectives
-
M. Hauschild, J. Jeswiet, and L. Alting From life cycle assessment to sustainable production: status and perspectives CIRP Ann. Manuf. Technol. 54 2005 1 21
-
(2005)
CIRP Ann. Manuf. Technol.
, vol.54
, pp. 1-21
-
-
Hauschild, M.1
Jeswiet, J.2
Alting, L.3
-
33
-
-
67651152558
-
Process chain simulation to foster energy efficiency in manufacturing
-
C. Herrmann, and S. Thiede Process chain simulation to foster energy efficiency in manufacturing CIRP J. Manuf. Sci. Technol 1 2009 221 229
-
(2009)
CIRP J. Manuf. Sci. Technol
, vol.1
, pp. 221-229
-
-
Herrmann, C.1
Thiede, S.2
-
35
-
-
43849103018
-
Tool and lubrication for negative incremental forming of a commercially pure titanium sheet
-
DOI 10.1016/j.jmatprotec.2007.10.043, PII S0924013607009442
-
G. Hussain, L. Gao, N. Hayatb, Z. Cuia, Y.C. Pangc, and N.U. Dard Tool and lubrication for negative incremental forming of a commercially pure titanium sheet J. Mater. Process Technol. 203 2008 193 201 (Pubitemid 351697688)
-
(2008)
Journal of Materials Processing Technology
, vol.203
, Issue.1-3
, pp. 193-201
-
-
Hussain, G.1
Gao, L.2
Hayat, N.3
Cui, Z.4
Pang, Y.C.5
Dar, N.U.6
-
37
-
-
32144435100
-
Asymmetric single point incremental forming of sheet metal
-
J. Jeswiet, F. Micari, G. Hirt, A. Bramley, J. Duflou, and J. Allwood Asymmetric single point incremental forming of sheet metal CIRP Ann. Manuf. Technol. 54 2005 88 114
-
(2005)
CIRP Ann. Manuf. Technol.
, vol.54
, pp. 88-114
-
-
Jeswiet, J.1
Micari, F.2
Hirt, G.3
Bramley, A.4
Duflou, J.5
Allwood, J.6
-
38
-
-
43649095602
-
Carbon emissions and CES™ in manufacturing
-
J. Jeswiet, and S. Kara Carbon emissions and CES™ in manufacturing CIRP Ann. Manuf. Technol. 57 2008 17 20
-
(2008)
CIRP Ann. Manuf. Technol.
, vol.57
, pp. 17-20
-
-
Jeswiet, J.1
Kara, S.2
-
39
-
-
41549134449
-
Formability of magnesium AZ31 sheet in the incremental forming at warm temperature
-
Y.H. Ji, and J.J. Parkjournal Formability of magnesium AZ31 sheet in the incremental forming at warm temperature J. Mater. Process Technol. 201 2008 354 358
-
(2008)
J. Mater. Process Technol.
, vol.201
, pp. 354-358
-
-
Ji, Y.H.1
Parkjournal, J.J.2
-
41
-
-
56149117985
-
The incoming global technological and industrial revolution towards competitive sustainable manufacturing
-
F. Jovane, H. Yoshikawa, L. Alting, C.R. Boer, E. Westkamper, D.M. WilliamsTseng, G. Seliger, and A.M. Paci The incoming global technological and industrial revolution towards competitive sustainable manufacturing CIRP Ann. Manuf. Technol. 57 2008 641 659
-
(2008)
CIRP Ann. Manuf. Technol.
, vol.57
, pp. 641-659
-
-
Jovane, F.1
Yoshikawa, H.2
Alting, L.3
Boer, C.R.4
Westkamper, E.5
Williamstseng, D.M.6
Seliger, G.7
Paci, A.M.8
-
42
-
-
0142093045
-
Sustainable product development and manufacturing by considering environmental requirements
-
H. Kaebernick, S. Kara, and M. Sun Sustainable product development and manufacturing by considering environmental requirements Robot. Comput. Integrated Manuf. 19 2003 461 468
-
(2003)
Robot. Comput. Integrated Manuf.
, vol.19
, pp. 461-468
-
-
Kaebernick, H.1
Kara, S.2
Sun, M.3
-
44
-
-
0142216136
-
A comparative study of stamping and hydroforming processes for an automobile fuel tank using FEM
-
B. Kang, B. Son, and J. Kim A comparative study of stamping and hydroforming processes for an automobile fuel tank using FEM Int. J. Mach. Tools Manuf. 44 2004 87 94
-
(2004)
Int. J. Mach. Tools Manuf.
, vol.44
, pp. 87-94
-
-
Kang, B.1
Son, B.2
Kim, J.3
-
45
-
-
33750049066
-
Combined mechanics-materials based optimization of superplastic forming of magnesium AZ31 alloy
-
M.K. Khraisheh, F.K. Abu-Farha, M.A. Nazzal, and K.J. Weinmann Combined mechanics-materials based optimization of superplastic forming of magnesium AZ31 alloy CIRP Ann. Manuf. Technol. 55 2006 233 236
-
(2006)
CIRP Ann. Manuf. Technol.
, vol.55
, pp. 233-236
-
-
Khraisheh, M.K.1
Abu-Farha, F.K.2
Nazzal, M.A.3
Weinmann, K.J.4
-
46
-
-
73249129242
-
Investigation of post-superplastic forming properties of AZ31 magnesium alloy
-
M.K. Khraisheh, F.K. Abu-Farha, and K.J. Weinmann Investigation of post-superplastic forming properties of AZ31 magnesium alloy CIRP Ann. Manuf. Technol. 56 2007 289 292
-
(2007)
CIRP Ann. Manuf. Technol.
, vol.56
, pp. 289-292
-
-
Khraisheh, M.K.1
Abu-Farha, F.K.2
Weinmann, K.J.3
-
47
-
-
0347720954
-
Manufacturing of lightweight components by metal forming
-
M. Kleiner, M. Geiger, and A. Klaus Manufacturing of lightweight components by metal forming CIRP Ann. Manuf. Technol. 52 2003 521 542
-
(2003)
CIRP Ann. Manuf. Technol.
, vol.52
, pp. 521-542
-
-
Kleiner, M.1
Geiger, M.2
Klaus, A.3
-
50
-
-
2042447069
-
Investigation into hydrodynamic deep drawing assisted by radial pressure Part I. Experimental observations of the forming process of aluminum alloy
-
L. Lang, J. Danckert, and K.B. Nielsen Investigation into hydrodynamic deep drawing assisted by radial pressure Part I. Experimental observations of the forming process of aluminum alloy J. Mater. Process Technol. 148 2004 119 131
-
(2004)
J. Mater. Process Technol.
, vol.148
, pp. 119-131
-
-
Lang, L.1
Danckert, J.2
Nielsen, K.B.3
-
51
-
-
33750034652
-
Characterisation of the flow properties of the quenchenable ultra high strength steel 22MnB5
-
M. Merklein, J. Lechler, and M. Geiger Characterisation of the flow properties of the quenchenable ultra high strength steel 22MnB5 CIRP Ann. Manuf. Technol. 55 2006 229 232
-
(2006)
CIRP Ann. Manuf. Technol.
, vol.55
, pp. 229-232
-
-
Merklein, M.1
Lechler, J.2
Geiger, M.3
-
52
-
-
38849113828
-
Increasing of the drawing depth using tailor rolled blanks - Numerical and experimental analysis
-
A. Meyer, B. Wietbrock, and G. Hirt Increasing of the drawing depth using tailor rolled blanks - Numerical and experimental analysis Int. J. Mach. Tools Manuf. 48 2008 522 531
-
(2008)
Int. J. Mach. Tools Manuf.
, vol.48
, pp. 522-531
-
-
Meyer, A.1
Wietbrock, B.2
Hirt, G.3
-
53
-
-
18444389489
-
FFC Cambridge process and removal of oxygen from metal-oxygen systems by molten salt electrolysis: An overview
-
K.S. Mohandas, and D.J. Fray FFC Cambridge process and removal of oxygen from metal-oxygen systems by molten salt electrolysis: an overview Trans. Indian Inst. Met. 57 2004 579 592
-
(2004)
Trans. Indian Inst. Met.
, vol.57
, pp. 579-592
-
-
Mohandas, K.S.1
Fray, D.J.2
-
54
-
-
33646085527
-
Technology strategies for sustainable metals production systems: A case study of primary aluminum production in the Netherlands and Norway
-
E.H.M. Moors Technology strategies for sustainable metals production systems: a case study of primary aluminum production in the Netherlands and Norway J. Clean. Prod. 2006 1121 1138
-
(2006)
J. Clean. Prod.
, pp. 1121-1138
-
-
Moors, E.H.M.1
-
55
-
-
0032274316
-
Tensile properties of the ZK60 magnesium alloy produced by hot extrusion of machined chip
-
M. Nakanishi, M. Mabuchi, N. Saito, M. Nakamura, and K. Higashi Tensile properties of the ZK60 magnesium alloy produced by hot extrusion of machined chip J. Mater. Sci. Lett. 17 1998 2003 2005
-
(1998)
J. Mater. Sci. Lett.
, vol.17
, pp. 2003-2005
-
-
Nakanishi, M.1
Mabuchi, M.2
Saito, N.3
Nakamura, M.4
Higashi, K.5
-
57
-
-
78149398105
-
Calculation of carbon emissions in metal forming manufacturing processes with eco-bening lubrication
-
P. Nava, J. Jeswiet, and I.Y. Kim Calculation of carbon emissions in metal forming manufacturing processes with eco-bening lubrication Trans. Namri/Sme 38 2010 751 758
-
(2010)
Trans. Namri/Sme
, vol.38
, pp. 751-758
-
-
Nava, P.1
Jeswiet, J.2
Kim, I.Y.3
-
59
-
-
72949085532
-
Sheet metal forming at elevated temperatures
-
R. Neugebauer, T. Altan, M. Geiger, M. Kleiner, and A. Sterzing Sheet metal forming at elevated temperatures Ann. CIRP 55 2006 793 816
-
(2006)
Ann. CIRP
, vol.55
, pp. 793-816
-
-
Neugebauer, R.1
Altan, T.2
Geiger, M.3
Kleiner, M.4
Sterzing, A.5
-
60
-
-
33845388393
-
Assessing the environmental impact of metal production processes
-
T.E. Norgate, S. Jahanshahi, and W.J. Rankin Assessing the environmental impact of metal production processes J. Clean. Prod. 15 2007 838 848
-
(2007)
J. Clean. Prod.
, vol.15
, pp. 838-848
-
-
Norgate, T.E.1
Jahanshahi, S.2
Rankin, W.J.3
-
61
-
-
0037804635
-
Process design for hydroforming of lightweight metal sheets at elevated temperatures
-
S. Novotny, and M. Geiger Process design for hydroforming of lightweight metal sheets at elevated temperatures J. Mater. Process Technol. 138 2003 594 599
-
(2003)
J. Mater. Process Technol.
, vol.138
, pp. 594-599
-
-
Novotny, S.1
Geiger, M.2
-
62
-
-
44949086573
-
Thermo-mechanical material response and hot sheet metal forming of Ti-6242
-
E. Odenberger, R. Pederson, and M. Oldenburg Thermo-mechanical material response and hot sheet metal forming of Ti-6242 Mater. Sci. Eng. A. 170 2008 158 168
-
(2008)
Mater. Sci. Eng. A.
, vol.170
, pp. 158-168
-
-
Odenberger, E.1
Pederson, R.2
Oldenburg, M.3
-
63
-
-
33847746289
-
The automobile industry & sustainability
-
R.J. Orsato, and P. Wells The automobile industry & sustainability J. Clean. Prod. 15 2007 989 993
-
(2007)
J. Clean. Prod.
, vol.15
, pp. 989-993
-
-
Orsato, R.J.1
Wells, P.2
-
64
-
-
34248557886
-
Economical and ecological aspects of single point incremental forming versus deep drawing technology
-
A. Petek, G. Gantar, T. Pepelnjak, and K. Kuzman Economical and ecological aspects of single point incremental forming versus deep drawing technology Key Eng. Mat 344 2007 931 938
-
(2007)
Key Eng. Mat
, vol.344
, pp. 931-938
-
-
Petek, A.1
Gantar, G.2
Pepelnjak, T.3
Kuzman, K.4
-
65
-
-
67650725790
-
Life cycle assessment of Australian automotive door skins
-
P. Puri, P. Compston, and V. Pantano Life cycle assessment of Australian automotive door skins Int. J. Life Cycle Asses. 14 2009 420 428
-
(2009)
Int. J. Life Cycle Asses.
, vol.14
, pp. 420-428
-
-
Puri, P.1
Compston, P.2
Pantano, V.3
-
66
-
-
70649095187
-
Transitioning to sustainable production - Part I: Application on machining technologies
-
F. Pusavec, P. Krajnik, and J. Kopac Transitioning to sustainable production - Part I: application on machining technologies J. Clean. Prod. 18 2010 174 184
-
(2010)
J. Clean. Prod.
, vol.18
, pp. 174-184
-
-
Pusavec, F.1
Krajnik, P.2
Kopac, J.3
-
67
-
-
77955271625
-
Transitioning to sustainable production-Part II: Evaluation of sustainable machining technologies
-
F. Pusavec, D. Kramar, and J. Kopac Transitioning to sustainable production-Part II: evaluation of sustainable machining technologies J. Clean. Prod. 18 2010 1211 1221
-
(2010)
J. Clean. Prod.
, vol.18
, pp. 1211-1221
-
-
Pusavec, F.1
Kramar, D.2
Kopac, J.3
-
68
-
-
77955328837
-
Minimising Embodied product energy to support energy efficient manufacturing
-
S. Rahimifard, Y. Seow, and T. Childs Minimising Embodied product energy to support energy efficient manufacturing CIRP Ann. Manuf. Technol. 59 2010 25 28
-
(2010)
CIRP Ann. Manuf. Technol.
, vol.59
, pp. 25-28
-
-
Rahimifard, S.1
Seow, Y.2
Childs, T.3
-
69
-
-
67449126472
-
Production of blanks with thickness transitions in longitudinal and lateral direction through 3D-strip profile rolling
-
N. Ryabkov, F. Jackel, K. Van Putten, and G. Hirt Production of blanks with thickness transitions in longitudinal and lateral direction through 3D-strip profile rolling Int. J. Mater. Form 1 2008 391 439
-
(2008)
Int. J. Mater. Form
, vol.1
, pp. 391-439
-
-
Ryabkov, N.1
Jackel, F.2
Van Putten, K.3
Hirt, G.4
-
70
-
-
0037400129
-
A new technique for recycling aluminium scrap
-
M. Samuel A new technique for recycling aluminium scrap J. Mater. Process Technol. 135 2003 117 124
-
(2003)
J. Mater. Process Technol.
, vol.135
, pp. 117-124
-
-
Samuel, M.1
-
71
-
-
7544238710
-
Life cycle assessment of lightweight and end-of-life scenarios for generic compact class passenger vehicles
-
W.P. Schmidt, E. Dahlqvist, M. Finkbeiner, S. Krinke, S. Lazzari, D. Oschmann, S. Pichon, and C. Thiel Life cycle assessment of lightweight and end-of-life scenarios for generic compact class passenger vehicles Int. J. Life Cycle Asses. 2004 405 416
-
(2004)
Int. J. Life Cycle Asses.
, pp. 405-416
-
-
Schmidt, W.P.1
Dahlqvist, E.2
Finkbeiner, M.3
Krinke, S.4
Lazzari, S.5
Oschmann, D.6
Pichon, S.7
Thiel, C.8
-
72
-
-
0003976506
-
-
SAE
-
J. Sullivan, R. Williams, S. Yester, E. Cobas-Flores, S. Chubbs, S. Hentges, and S. Pomper Life Cycle Inventory of a Generic US Family Sedan 1998 SAE Paper No. 98216
-
(1998)
Life Cycle Inventory of A Generic US Family Sedan
-
-
Sullivan, J.1
Williams, R.2
Yester, S.3
Cobas-Flores, E.4
Chubbs, S.5
Hentges, S.6
Pomper, S.7
-
74
-
-
43649090029
-
A comparison of manufacturing and remanufacturing energy intensities with application to diesel engine production
-
J.W. Sutherland, D.P. Adler, K.R. Haapala, and V. Kumar A comparison of manufacturing and remanufacturing energy intensities with application to diesel engine production CIRP Ann. Manuf. Technol. 57 2008 5 8
-
(2008)
CIRP Ann. Manuf. Technol.
, vol.57
, pp. 5-8
-
-
Sutherland, J.W.1
Adler, D.P.2
Haapala, K.R.3
Kumar, V.4
-
75
-
-
62949178508
-
Hot profile extrusion of AA-6060 aluminum chips
-
A.E. Tekkaya, M. Schikorra, D. Becker, D. Biermann, N. Hammer, and K. Pantke Hot profile extrusion of AA-6060 aluminum chips J. Mater. Process Technol. 209 2009 3343 3350
-
(2009)
J. Mater. Process Technol.
, vol.209
, pp. 3343-3350
-
-
Tekkaya, A.E.1
Schikorra, M.2
Becker, D.3
Biermann, D.4
Hammer, N.5
Pantke, K.6
-
76
-
-
33847693162
-
Is there an environmental advantage of using magnesium components for light weighting cars?
-
A. Tharumarajah, and P. Koltun Is there an environmental advantage of using magnesium components for light weighting cars? J. Clean. Prod. 15 2007 1007 1013
-
(2007)
J. Clean. Prod.
, vol.15
, pp. 1007-1013
-
-
Tharumarajah, A.1
Koltun, P.2
-
77
-
-
0041909995
-
Hydraulic-pressure-enhanced cup-drawing processes - An appraisal
-
S. Thiruvarudchelvan, and F.W. Travis Hydraulic-pressure-enhanced cup-drawing processes - an appraisal J. Mater. Process Technol. 140 2003 70 75
-
(2003)
J. Mater. Process Technol.
, vol.140
, pp. 70-75
-
-
Thiruvarudchelvan, S.1
Travis, F.W.2
-
78
-
-
33745823141
-
Numerical research and optimisation of high pressure sheet metal forming of tailor rolled blanks
-
M. Urban, M. Krahn, G. Hirth, and R. Kopp Numerical research and optimisation of high pressure sheet metal forming of tailor rolled blanks J. Mater. Process Technol. 177 2006 360 363
-
(2006)
J. Mater. Process Technol.
, vol.177
, pp. 360-363
-
-
Urban, M.1
Krahn, M.2
Hirth, G.3
Kopp, R.4
-
81
-
-
4344674332
-
Tribological approaches for green metal forming
-
Z.G. Wang Tribological approaches for green metal forming J. Mater. Process Technol. 151 2004 223 227
-
(2004)
J. Mater. Process Technol.
, vol.151
, pp. 223-227
-
-
Wang, Z.G.1
-
82
-
-
65649134031
-
Microstructure and mechanical properties of AZ31B magnesium alloy recycled by solid-state process from different size chips
-
S. Wu, Z. Ji, and T. Zhang Microstructure and mechanical properties of AZ31B magnesium alloy recycled by solid-state process from different size chips J. Mater. Process Technol. 209 2009 5319 5324 www.worldautosteeel.com
-
(2009)
J. Mater. Process Technol.
, vol.209
, pp. 5319-5324
-
-
Wu, S.1
Ji, Z.2
Zhang, T.3
|