Improvement of thermal inertia of styrene-ethylene/butylene-styrene (SEBS) polymers by addition of microencapsulated phase change materials (PCMs)

European Polymer Journal

Volumn 47, Issue 2, 2011, Pages 153-161

  Juarez D ^a   Ferrand, S ^a   Fenollar, O ^a   Fombuena, V ^a   Balart, R ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

Infrared thermography (IRT); Phase change materials (PCM); SEBS; Thermal inertia

Indexed keywords

ACTIVE INFRARED THERMOGRAPHY; CONVENTIONAL INJECTION MOLDING; COOLING CURVE; COOLING PROCESS; DUCTILE PROPERTIES; ELASTOMERIC MATRICES; INFRARED THERMOGRAPHY; KEY FACTORS; MATRIX; MECHANICAL CHARACTERIZATIONS; MECHANICAL PERFORMANCE; MELTING TEMPERATURES; MICROCAPSULES; MICROENCAPSULATED PHASE CHANGE MATERIAL; PHASE CHANGE MATERIALS (PCM); SEBS; SEM; TEMPERATURE RANGE; THERMAL INERTIA; THERMAL REGULATION; WETTING PROPERTY;

BOND (MASONRY); BUOYANCY; GERMANIUM ALLOYS; INJECTION MOLDING; MECHANICAL PROPERTIES; MELTING POINT; PHASE DIAGRAMS; SCANNING ELECTRON MICROSCOPY; STYRENE; THERMOGRAPHY (IMAGING); THERMOGRAPHY (TEMPERATURE MEASUREMENT);

PHASE CHANGE MATERIALS;

EID: 78751575938     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2010.11.004     Document Type: Article

References (36)

1. Z. Ahmad, K.D. Kumar, M. Saroop, N. Preschilla, A. Biswas, and J.R. Bellare Highly transparent thermoplastic elastomer from isotactic polypropylene and styrene/ethylene-butylene/styrene triblock copolymer: structure-property correlations Polym Eng Sci 50 2 2010 331 341
2. A. Barbe, K. Bokamp, C. Kummerlowe, H. Sollmann, N. Vennemann, and S. Vinzelberg Investigation of modified SEBS-based thermoplastic elastomers by temperature measurements scanning stress relaxation Polym Eng Sci 45 11 2005 1498 1507
3. M. Masoomi, A.A. Katbab, and H. Nazockdast Reduction of noise from disc brake systems using composite friction materials containing thermoplastic elastomers (TPEs) Appl Compos Mater 13 5 2006 305 319
4. J.E. Puskas, E.A. Foreman-Orlowski, G.T. Lim, S.E. Porosky, M.M. Evancho-Chapman, and S.P. Schmidt A nanostructured carbon-reinforced polyisobutylene-based thermoplastic elastomer Biomaterials 31 9 2010 2477 2488
5. S. Reddy, E. Arzt, and A. del Campo Bioinspired surfaces with switchable adhesion Adv Mater 19 22 2007 3833
6. Y.T. Li, L.F. Li, Y. Zhang, S.F. Zhao, L.D. Xie, and S.D. Yao Improving the aging resistance of styrene-butadiene-styrene tri-block copolymer and application in polymer-modified asphalt J Appl Polym Sci 116 2 2010 754 761
7. J.B. Xu, A.M. Zhang, T. Zhou, X.J. Cao, and Z.N. Me A study on thermal oxidation mechanism of styrene-butadiene-styrene block copolymer (SBS) Polym Degrad Stabil 92 9 2007 1682 1691
8. T. Wright, A.S. Jones, and H.J. Harwood Enhancement of the high-temperature properties of an SEBS thermoplastic elastomer by chemical modification J Appl Polym Sci 86 5 2002 1203 1210
9. B.K. Hong, and W.H. Jo Effects of molecular weight of SEBS triblock copolymer on the morphology, impact strength, and rheological property of syndiotactic polystyrene/ethylene-propylene rubber blends Polymer 41 6 2000 2069 2079
10. A. Arevalillo, M.E. Munoz, A. Santamaria, L. Fraga, and J.A. Barrio Novel rheological features of molten SEBS copolymers: mechanical relaxation at low frequencies and flow split Eur Polym J 44 10 2008 3213 3221
11. N.S. Allen, M. Edge, D. Mourelatou, A. Wilkinson, C.M. Liauw, and M.D. Parellada Influence of ozone on styrene-ethylene-butylene-styrene (SEBS) copolymer Polym Degrad Stabil 79 2 2003 297 307
12. N.S. Allen, C. Luengo, M. Edge, A. Wilkinson, M.D. Parellada, and J.A. Barrio Photooxidation of styrene-ethylene-butadiene-styrene (SEBS) block copolymer J Photochem Photobiol A-Chem 162 1 2004 41 51
13. Kusmono, Ishak ZAM, Chow WS, Takeichi T, Rochmadi. Influence of SEBS-g-MA on morphology, mechanical, and thermal properties of PA6/PP/organoclay nanocomposites. Eur Polym J 2008;44(4):1023-1039.
14. L.G. Yin, J.H. Yin, D.A. Shi, and S.F. Luan Effects of SEBS-g-BTAI on the morphology, structure and mechanical properties of PA6/SEBS blends Eur Polym J 45 5 2009 1554 1560
15. V. Rek, T.H. Grguric, and Z. Jelcic Processing and dynamic mechanical properties of PS-HI/SEBS blends 2003 Wiley-V C H Verlag Gmbh Budapest, Hungary p. 143-50
16. M. Sugimoto, K. Sakai, Y. Aoki, T. Taniguchi, K. Koyama, and T. Ueda Rheology and morphology change with temperature of SEBS/hydrocarbon oil blends J Polym Sci Pt B-Polym Phys 47 10 2009 955 965
17. S. Zulfiqar, Z. Ahmad, M. Ishaq, S. Saeed, and M.I. Sarwar Thermal and mechanical properties of SEBS-g-MA based inorganic composite materials J Mater Sci 42 1 2007 93 100 (Pubitemid 46154442)
18. X.D. Wang, W. Feng, H.Q. Li, and E. Ruckenstein Optimum toughening via a bicontinuous blending: toughening of PPO with SEBS and SEBS-g-maleic anhydride Polymer 43 1 2002 37 43
19. A. Ganguly, A.K. Bhowmick, and Y.J. Li Insights into montmorillonite nanoclay based ex situ nanocomposites from SEBS and modified SEBS by small-angle X-ray scattering and modulated DSC studies Macromolecules 41 16 2008 6246 6253
20. K.A. Kibble, and W.D. Xiao Mechanical properties and flame retardancy of SEBS-based composites filled with aluminium hydroxide Polym Polym Compos 16 7 2008 423 430
21. C.J. Hung, J.F. Kuan, and J.M. Huang Wood flour reinforced polystyrene composite using SEBS-g-MA as compatibilizer 2000 Technomic Publ. Co. Inc. Orlando, Fl p. 3831-4
22. K. Oksman, H. Lindberg, and A. Holmgren The nature and location of SEBS-MA compatibilizer in polyethylene-wood flour composites J Appl Polym Sci 69 1 1998 201 209 (Pubitemid 128623939)
23. H. Shi, B. Li, C. Chen, and Y.L. Jia Preparation of HDPE/SEBS-g-MAH and its effect on mechanical properties of HDPE/wood flour composites J Appl Polym Sci 104 5 2007 3161 3170
24. M. Heino, J. Kirjava, P. Hietaoja, and J. Seppala Compatibilization of polyethylene terephthalate/polypropylene blends with styrene-ethylene/butylene- styrene (SEBS) block copolymers J Appl Polym Sci 65 2 1997 241 249
25. G.J. Nam, K.Y. Kim, and J.W. Lee The effect of SEBS on interfacial tension and rheological properties of LDPE/PS blend J Appl Polym Sci 96 3 2005 905 911
26. G.J. Jiang, H. Wu, and S.Y. Guo A study on compatibility and properties of POE/PS/SEBS ternary blends J Macromol Sci Part B-Phys 46 3 2007 533 545
27. Y.B. Cai, Q.F. Wei, F.L. Huang, S.L. Lin, F. Chen, and W.D. Gao Thermal stability, latent heat and flame retardant properties of the thermal energy storage phase change materials based on paraffin/high density polyethylene composites Renew Energy 34 10 2009 2117 2123
28. C.Z. Chen, L.G. Wang, and Y. Huang Morphology and thermal properties of electrospun fatty acids/polyethylene terephthalate composite fibers as novel form-stable phase change materials Sol Energy Mater Sol Cells 92 11 2008 1382 1387
29. J.L. Li, P. Xue, W.Y. Ding, J.M. Han, and G.L. Sun Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage Sol Energy Mater Sol Cells 93 10 2009 1761 1767
30. L. Bayes-Garcia, L. Ventola, R. Cordobilla, R. Benages, T. Calvet, and M.A. Cuevas-Diarte Phase Change Materials (PCM) microcapsules with different shell compositions: preparation, characterization and thermal stability Sol Energy Mater Sol Cells 94 7 2010 1235 1240
31. S. Raoux, C. Cabral, L. Krusin-Elbaum, J.L. Jordan-Sweet, K. Virwani, and M. Hitzbleck Phase transitions in Ge-Sb phase change materials J Appl Phys 105 2009 (6)
32. F. Salaun, E. Devaux, S. Bourbigot, and P. Rumeau Influence of the solvent on the microencapsulation of an hydrated salt Carbohydr Polym 79 4 2010 964 974
33. L. Sanchez-Silva, J.F. Rodriguez, A. Romero, A.M. Borreguero, M. Carmona, and P. Sanchez Microencapsulation of PCMs with a styrene-methyl methacrylate copolymer shell by suspension-like polymerisation Chem Eng J 157 1 2010 216 222
34. X.L. Shan, J.P. Wang, X.X. Zhang, and X.C. Wang Formaldehyde-free and thermal resistant microcapsules containing n-octadecane Thermochim Acta 494 1-2 2009 104 109
35. R. Baetens, B.P. Jelle, and A. Gustavsen Phase change materials for building applications: a state-of-the-art review Energy Build 42 9 2010 1361 1368
36. L.F. Cabeza, C. Castellon, M. Nogues, M. Medrano, R. Leppers, and O. Zubillaga Use of microencapsulated PCM in concrete walls for energy savings Energy Build 39 2 2007 113 119