Correlations between the morphology and the thermo-mechanical properties in poly(vinyl acetate)/epoxy thermosets

Journal of Thermal Analysis and Calorimetry

Volumn 102, Issue 3, 2010, Pages 1025-1033

  Sanchez Cabezudo M ^a   Masegosa, R M ^a   Salom, C ^a   Prolongo, M G ^a  

^a UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

Author keywords

Dynamic mechanical properties; Glass transition; Modulus; Morphology; Tensile test; Thermoplastic epoxy blends

Indexed keywords

BLEND MORPHOLOGY; COMPOSITION DEPENDENCE; DYNAMIC MECHANICAL PROPERTY; DYNAMIC MECHANICAL THERMAL ANALYSIS; EPOXY THERMOSETS; GLASS TRANSITION TEMPERATURE; LOSS MODULI; LOW TEMPERATURES; MODULUS; NEAT POLYMER; POLY(VINYL ACETATE) (PVAC); RICH PHASE; ROOM TEMPERATURE; STORAGE MODULI; TEMPERATURE CURVES; TENSILE TESTS; THERMOMECHANICAL PROPERTIES; TWO PHASE COMPOSITES;

ACTIVATION ENERGY; DYNAMIC MECHANICAL ANALYSIS; DYNAMICS; GLASS; GLASS TRANSITION; MORPHOLOGY; POLYMER BLENDS; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY; TENSILE TESTING; THERMOANALYSIS; THERMOSETS;

MECHANICAL PROPERTIES;

EID: 78650747711     PISSN: 13886150     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10973-010-0881-y     Document Type: Article

References (30)

1. Pascault JP, Williams RJJ. Formulation and characterization of thermoset-thermoplastic blends. In: Paul DR, Bucknall CB, editors. Polymer blends. New York: Wiley; 2000. p. 379-415.
2. BB Johnsen AJ Kinloch AC Taylor 2005 Toughness of syndiotactic polystyrene/epoxy polymer blends: microstructure and toughening mechanisms Polymer 46 7352 7369 1:CAS:528:DC%2BD2MXns1Sms7Y%3D 10.1016/j.polymer.2005.05. 151 (Pubitemid 41125193)
3. R Thomas S Durix C Sinturel T Omonov S Goossens G Groeninckx P Moldenaers S Thomas 2007 Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin-effects of liquid rubber inclusion Polymer 48 1695 1710 1:CAS:528:DC%2BD2sXitlyrsr4%3D 10.1016/j.polymer.2007.01.018
4. G Peña A Eceiza A Valea P Remiro P Oyanguren I Mondragón 2003 Control of morphologies and mechanical properties of thermoplastics- modified epoxy matrices by addition of a second thermoplastic Polym Int 52 1444 1453 10.1002/pi.1209 (Pubitemid 37144717)
5. J López M Rico B Montero J Díez C Ramirez 2009 Polymer blends based on an epoxy-amine thermoset and a thermoplastic. Effect of thermoplastic on cure reaction and thermal stability of the system J Therm Anal Calorim 95 369 376 10.1007/s10973-008-9237-2
6. López J, Rico M, Ramirez C, Montero B. Epoxy resin modified with a thermoplastic. Influence of modifier and reaction temperature on the phase separation. J Therm Anal Calorim. 2009. doi: 10.2007/s10973-009-0441-5.
7. I Mondragón M Remiro MD Martin A Valea M Franco V Bellenguer 1998 Viscoelastic behaviour of epoxy resins modified with poly(methyl methacrylate) Polym Int 47 152 158 10.1002/(SICI)1097-0126(1998100)47:2<152::AID-PI41>3. 0.CO;2-A
8. SG Prolongo A Salazar A Ureña J Rodríguez 2007 Effect of hydroxyls content on the morphology and properties of epoxy/poly(styrene-co- allyalcohol) blends Polym Eng Sci 47 1580 1587 1:CAS:528:DC%2BD2sXhtFeltb%2FO 10.1002/pen.20686 (Pubitemid 47573741)
9. Prolongo MG, Arribas C, Salom C, Masegosa RM, Dynamic mechanical properties and morphology of poly(benzyl methacrylate) modified epoxy thermoset. Polym Eng Sci. 2009. doi: 10.1002/pen.21707.
10. 13C n.m.r. investigations of molecular motions involved in the β relaxation of epoxy networks based on DGEBA and aliphatic amines Polymer 38 1767 1778 1:CAS:528:DyaK2sXis1SjtLY%3D 10.1016/S0032-3861(96)00694-5
11. G Sivanlingam R Karthik G Madras 2004 Blends of poly(ε-caprolactone) and vinyl acetate: mechanical properties and thermal degradation Polym Degrad Stabl 84 34551
12. A Lapprand C Arribas C Salom RM Masegosa MG Prolongo 2003 Epoxy resins modified with poly(vinyl acetate) J Mater Process Technol 143-144 827 831 10.1016/S0924-0136(03)00356-X
13. M Sánchez-Cabezudo MG Prolongo C Salom RM Masegosa 2006 Cure kinetics of epoxy resin and thermoplastic polymer J Therm Anal Calorim 86 699 705 10.1007/s10973-006-7896-4 (Pubitemid 44892371)
14. C Arribas L Sepúlveda C Salom RM Masegosa MG Prolongo 2007 Morphology effect on the hydrothermal ageing of a thermoplastic modified epoxy thermoset Polym Eng Sci 47 960 968 1:CAS:528:DC%2BD2sXls1yhurg%3D 10.1002/pen.20780 (Pubitemid 46905299)
15. MG Prolongo C Arribas C Salom RM Masegosa 2007 Phase separation, cure kinetics and morphology in epoxy/poly(vinyl acetate blends) J Appl Polym Sci 103 1507 1516 1:CAS:528:DC%2BD2sXktVCqug%3D%3D 10.1002/app.24613 (Pubitemid 46051599)
16. S Zheng Y Hu Q Guo J Wei 1996 Miscibility, morphology and fracture toughness of epoxy/poly(vinyl acetate) blends Colloid Polym Sci 274 410 417 1:CAS:528:DyaK28Xjs12ltrs%3D 10.1007/BF00652462 (Pubitemid 126504230)
17. PA Oyanguren MJ Galante Andromaque PM Frontini RJJ Williams 1999 Development of bicontinuous morphologies in polysulfone-epoxy blends Polymer 40 5249 5255 1:CAS:528:DyaK1MXktFKlsr8%3D 10.1016/S0032-3861(98)00742-3 (Pubitemid 29339407)
18. N Chikhi S Fellahi M Bakar 2002 Modification of epoxy resin using reactive liquid (ATBN) rubber Eur Polym J 38 251 264 1:CAS:528: DC%2BD3MXotFCqt7s%3D 10.1016/S0014-3057(01)00194-X (Pubitemid 33039164)
19. S Montserrat Y Calventus JM Hutchinson 2005 Effect of cooling rate and frequency on the calorimetric measurement of the glass transition Polymer 46 12181 12189 1:CAS:528:DC%2BD2MXhtlCnsbjK 10.1016/j.polymer.2005.10.138 (Pubitemid 41818999)
20. D Verchere JP Pascault H Sautereau SM Moschiar CC Ricardi RJJ Williams 1991 Rubber-modified epoxies. II. Influence of cure schedule and rubber concentration on the generated morphology J Appl Polym Sci 42 701 716 1:CAS:528:DyaK3MXisVyntrY%3D 10.1002/app.1991.070420315
21. TG Fox 1956 Influence of diluent and of copolymer composition on the glass temperature of a polymer system Bull Am Phys Soc 1 123 1:CAS:528:DyaG2sXmsVOiuw%3D%3D
22. Riande E, Díaz-Calleja R, Prolongo MG, Masegosa RM, Salom C. Polymer viscoelasticity: stress and strain in practice. New York: Marcel Dekker; 2000. p. 283-5.
23. S Deng M Hou L Ye 2007 Temperature dependent elastic moduli of epoxies measured by DMA and their correlations to mechanical testing data Polym Test 26 803 813 1:CAS:528:DC%2BD2sXovFejtbk%3D 10.1016/j.polymertesting.2007.05.003 (Pubitemid 47211287)
24. EH Kerner 1956 The elastic and thermo-elastic properties of composite media Proc Phys Soc Lond B 69 808 813 10.1088/0370-1301/69/8/305
25. WEA Davies 1971 The elastic constant of a two-phase composite material J Phys D Appl Phys 4 1176 1181 10.1088/0022-3727/4/8/318
26. B Budiansky 1965 On the elastic moduli of some heterogeneous materials J Mech Phys Solids 13 223 227 10.1016/0022-5096(65)90011-6
27. BB Johnsen AJ Kinloch RD Mohammed AC Taylor S Springer 2007 Toughening mechanism of nanoparticle-modified epoxy polymers Polymer 48 530 541 1:CAS:528:DC%2BD2sXlsFGhsg%3D%3D 10.1016/j.polymer.2006.11.038 (Pubitemid 46038340)
28. g behaviour, mechanical properties and modulus-composition studies Polymer 39 5609 5617 1:CAS:528:DyaK1cXls1Kitbk%3D 10.1016/S0032-3861(98)00015-9
29. AJ Ryan JL Stanford RH Still 1991 Thermal, mechanical and fracture properties of reaction injection-moulded poly(urethane-urea)s Polymer 32 1426 1439 10.1016/0032-3861(91)90423-G (Pubitemid 21682841)
30. DJ Hourston F Schäfer 1996 Poly(ether urethane)/poly(ethyl methacrylate) interpenetrating polymer networks: morphology, phase continuity and mechanical properties as a function of composition Polymer 37 3521 3530 1:CAS:528:DyaK28XltVOns7s%3D 10.1016/0032-3861(96)00164-4 (Pubitemid 126375842)