The use of a high temperature wind tunnel for MT-SOFC testing-Part I: Detailed experimental temperature measurement of an MT-SOFC using an avant-garde high temperature wind tunnel and various measurement techniques

Journal of Fuel Cell Science and Technology

Volumn 7, Issue 6, 2010, Pages

  Lawlor, V ^a,b   Zauner, G ^a   Hochenauer, C ^a   Mariani, A ^c   Griesser, S ^a   Carton, J G ^b   Klein, K ^d   Kuehn, S ^d   Olabi, A G ^b   Cordiner, S ^c   Meissner, D ^a,b   Buchinger, G ^a,b  

^a UNIVERSITY OF APPLIED SCIENCES UPPER AUSTRIA   (Austria)

^b DUBLIN CITY UNIVERSITY   (Ireland)

^c UNIVERSITY OF ROME TOR VERGATA   (Italy)

^d eZelleron GmbH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CORE TEMPERATURE; EXPERIMENTAL APPARATUS; GAS INLET; HIGH TEMPERATURE; INTERESTING INFORMATION; LASER GUIDED; MEASUREMENT RESULTS; MEASUREMENT TECHNIQUES; MICRO-TUBULAR SOLID OXIDE FUEL CELLS; POWER OUT PUT; RADIAL TEMPERATURE DISTRIBUTION; SINGLE CELLS; TEMPERATURE GRADIENT; TEMPERATURE MEASURING; TEMPERATURE MONITORING; TEST CELL; THERMOGRAPHIC CAMERAS; WORKING MODE;

AERODYNAMICS; COMPUTATIONAL FLUID DYNAMICS; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; SPECTROSCOPIC ANALYSIS; TEMPERATURE MEASUREMENT; THERMOCOUPLES; THERMOMETERS; WIND TUNNELS;

SOLID OXIDE FUEL CELLS (SOFC);

EID: 78650403157     PISSN: 1550624X     EISSN: 15516989     Source Type: Journal    
DOI: 10.1115/1.4001354     Document Type: Article

References (25)

1. Winkler, W., and Lorenz, H., 2002, "Design Studies of Mobile Applications With SOFC-Heat Engine Modules," J. Power Sources, 106(1-2), pp. 338-343.
2. Kendall, K., 2009, "Progress in Microtubular Solid Oxide Fuel Cells," Int. J. Appl. Ceram. Technol., 7(1), pp. 1-9.
3. Lawlor, V., Griesser, S., Buchinger, G., Olabi, A. G., Cordiner, S., and Meissner, D., 2009, "Review of the Micro-Tubular Solid Oxide Fuel Cell: Part I. Stack Design Issues and Research Activities," J. Power Sources, 193(2), pp. 387-399.
4. Kendall, K., 2005, "Progress in Solid Oxide Fuel Cell Materials," Int. Mater. Rev., 50, pp. 257-264. (Pubitemid 41408012)
5. Sammes, N. M., Bove, R., and Pusz, J., 2006, "Fuel Cell Technology: Reaching Toward Commercialization," The Case of the Micro-Tubulal Solid Oxide Fuel Cell (Series in Engineering Materials and Processes), Vol. XIV, N. Sammes, ed.
6. Suzuki, T., Funahashi, Y., Yamaguchi, T., Fujishiro, Y., and Awano, M., 2008, "New Stack Design of Micro-Tubular SOFCs for Portable Power Sources," Fuel Cells, 8(6), pp. 381-384.
7. Serincan, M. F., Pasaogullari, U., and Sammes, N. M., 2009, "Effects of Operating Conditions on the Performance of a Micro-Tubular Solid Oxide Fuel Cell (SOFC)," J. Power Sources, 192(2), pp. 414-422.
8. Serincan, M. F., Pasaogullari, U., and Sammes, N. M., 2008, "Computational Thermal-Fluid Analysis of a Microtubular Solid Oxide Fuel Cell," J. Electrochem. Soc., 155(11), pp. B1117-B1127.
9. Bujalski, W., Dikwal, C. M., and Kendall, K., 2007, "Cycling ofThree Solid Oxide Fuel Cell Types," J. Power Sources, 171(1), pp. 96-100. (Pubitemid 47332973)
10. Lockett, M., Simmons, M. J. H., and Kendall, K., 2004, "CFD to Predict Temperature Profile for Scale Up of Micro-Tubular SOFC Stacks," J. Power Sources, 131(1-2), pp. 243-246. (Pubitemid 41325871)
11. Cordiner, S., Mariani, A., and Mulone, V., 2008, Second International Conference on Thermal Issues in Emerging Technologies, ThETA 2008, pp. 85-96.
12. Lawlor, V., Hochenauer, C., Buchinger, G., Griesser, S., Olabi, A., and Meissner, D., 2008, "Numerical Simulation and Experimental Validation to Design an Optimised Micro-Tubular SOFC Reactor," Forschungsforum Der Österreichischen Fachhochschulen, Vol. 2, Upper Austria University of Applied Science, Wels, Austria.
13. Du, Y., Finnerty, C., and Jiang, J., 2008, "Thermal Stability of Portable Microtubular SOFCs and Stacks," J. Electrochem. Soc., 155(9), pp. B972-B977.
14. Brett, D. J. L., Aguiar, P., Clague, R., Marquis, A. J., Schöttl, S., Simpson, R., and Brandon, N. P., 2007, "Application of Infrared Thermal Imaging to the Study of Pellet Solid Oxide Fuel Cells," J. Power Sources, 166(1), pp. 112-119. (Pubitemid 46356812)
15. Pomfret, M. B., Steinhurst, D. A., Kidwell, D. A., and Owrutsky, J. C., 2010, "Thermal Imaging of Solid Oxide Fuel Cell Anode Processes," J. Power Sources, 195(1), pp. 257-262.
16. Hashimoto, S., Nishino, H., Liu, Y., Asano, K., Mori, M., Funahashi, Y., and Fujishiro, Y., 2008, "The Electrochemical Cell Temperature Estimation of Micro-Tubular SOFCs During the Power Generation," J. Power Sources, 181(2), pp. 244-250.
17. Hashimoto, S., Nishino, H., Liu, Y., Asano, K., Mori, M., Funahashi, Y., and Fujishiro, Y., 2008, "Development of Evaluation Technologies for Microtubular SOFCs Under Pressurized Conditions," ASME J. Fuel Cell Sci. Technol., 5(3), p. 031208.
18. Sammes, N. M., and Du, Y., 2007, "Fabrication and Characterization ofTubular Solid Oxide Fuel Cells," Int. J. Appl. Ceram. Technol., 4(2), pp. 89-102. (Pubitemid 46567291)
19. Buchinger, G., Kraut, J., Raab, T., Griesser, S., Lawlor, V., Haiber, J., Hiesgen, R., Sitte, W., and Meissner, D., 2007, Operating Micro-Tubular SOFCs Containing Nickel BasedAnodes With Blends ofMethane and Hydrogen, Upper Austria University of Applied Science, Wels, Austria, pp. 450-455.
20. Suzuki, T., Yamaguchi, T., Fijishiro, Y., and Awano, M., 2006, "Improvement of SOFC Performance Using a Microtubular, Anode-Supported SOFC," J. Electrochem. Soc., 153(5), pp. A925-A928.
21. Funahashi, Y., Shimamori, T., Suzuki, T., Fujishiro, Y., and Awano, M., 2007, "Fabrication and Characterization of Components for Cube Shaped Micro Tubular SOFC Bundle," J. Power Sources, 163(2), pp. 731-736. (Pubitemid 44959627)
22. Campana, R., Merino, R. I., Larrea, A., Villarreal, I., and Orera, V. M., 2009, "Fabrication, Electrochemical Characterization and Thermal Cycling of Anode Supported Microtubular Solid Oxide Fuel Cells," J. Power Sources, 192(1), pp. 120-125.
23. Suzuki, T., Funahashi, Y., Hasan, Z., Yamaguchi, T., Fujishiro, Y., and Awano, M., 2008, "Fabrication of Needle-Type Micro SOFCs for Micro Power Devices," Electrochem. Commun., 10(10), pp. 1563-1566.
24. Kanamura, K., Yoshioka, S., and Takehara, Z.-I., 1991, "Temperature Distribution in Tubular Solid Oxide Fuel Cell," Bull. Chem. Soc. Jpn., 64(6), pp. 1828-1834.
25. Fischer, K., and Seume, J. R., 2009, "Location and Magnitude of Heat Sources in Solid Oxide Fuel Cells," ASME J. Fuel Cell Sci. Technol., 6(1), p. 011002.