Nanocomposite-based lignocellulosic fibers 2: Layer-by-layer modification of wood fibers for reinforcement in thermoplastic composites

Composites Part A: Applied Science and Manufacturing

Volumn 42, Issue 1, 2011, Pages 84-91

  Lin, Zhiyuan ^a   Renneckar, Scott ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

A. Clay thin films; A. Nano composites; A. Wood thermoplastic composites; E. Layer by layer

Indexed keywords

A. CLAY THIN FILMS; A. WOOD THERMOPLASTIC COMPOSITES; CRYSTALLINITIES; CRYSTALLIZATION BEHAVIOR; ELONGATION AT BREAK; FIBER COMPOSITE; FLEXURAL STRENGTH; FLEXURAL TESTS; LAYER-BY-LAYERS; LIGNOCELLULOSIC FIBERS; MELT-COMPOUNDING; MODIFIED FIBERS; MODIFIED WOOD; MODULUS VALUES; MONTMORILLONITE CLAY; NUCLEATION AGENTS; POLY(DIALLYLDIMETHYLAMMONIUM) CHLORIDE; SEQUENTIAL ADSORPTION; STRENGTH VALUES; THERMAL PROPERTIES; THERMOPLASTIC COMPOSITE; WOOD FIBER;

ADSORPTION; CHLORINE COMPOUNDS; CLAY MINERALS; COMPRESSION MOLDING; DIFFERENTIAL SCANNING CALORIMETRY; DYNAMIC ANALYSIS; DYNAMIC MECHANICAL ANALYSIS; DYNAMICS; MECHANICAL PROPERTIES; NANOCOMPOSITES; REINFORCED PLASTICS; REINFORCEMENT; SILICATE MINERALS; TENSILE STRENGTH; THERMODYNAMIC PROPERTIES; THERMOPLASTICS; THIN FILMS; WATER ABSORPTION; WOOD PRODUCTS;

FIBERS;

ADSORPTION; CHLORINE COMPOUNDS; CLAY; COMPRESSION MOLDING; FIBERS; MECHANICAL PROPERTIES; PLASTICS; POLYMER WOOD COMBINATIONS; REINFORCEMENT; TENSILE STRENGTH; THERMAL PROPERTIES; THERMOPLASTICS; THIN FILMS; WATER ABSORPTION; WOOD PRODUCTS;

EID: 78650223049     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2010.10.011     Document Type: Article

References (48)

1. A.K. Bledzki, and J. Gassan Composites reinforced with cellulose based fibres Prog Polym Sci 24 2 1999 221 274
2. C.M. Clemons Wood-plastic composites in the United States: the interfacing of two industries Forest Prod J 52 6 2002 10 18
3. Morton J, Quarmley J, Rossi L. Current and emerging applications for natural and woodfiber-plastic composites. In: Int conf woodfiber-plast compos, 7th; 2004. p. 3-6.
4. D. Maldas, and B.V. Kokta Improving adhesion of wood fiber with polystyrene by the chemical treatment of fiber with a coupling agent and the influence on the mechanical properties of composites J Adhes Sci Technol 3 7 1989 529 539
5. R.G. Raj, B.V. Kokta, and C. Daneault Wood flour as a low-cost reinforcing filler for polyethylene: studies on mechanical properties J Mater Sci 25 3 1990 1851 1855
6. J.M. Felix, and P. Gatenholm The nature of adhesion in composites of modified cellulose fibers and polypropylene J Appl Polym Sci 42 3 1991 609 620
7. J.M. Felix, P. Gatenholm, and H.P. Schreiber Controlled interactions in cellulose-polymer composites. I: effect on mechanical properties Polym Compos 14 6 1993 449 457
8. A.K. Bledzki, J. Gassan, and S. Theis Wood-filled thermoplastic composites Mech Compos Mater 34 6 1999 563 568 [translation of Mekhanika Kompozitnykh Materialov (Zinatne)]
9. G. Decher Fuzzy nanoassemblies: toward layered polymeric multicomposites Science (Washington, DC) 277 5330 1997 1232 1237
10. Decher G, Hong JD. Buildup of ultrathin multilayer films by a self-assembly process. 1. Consecutive adsorption of anionic and cationic bipolar amphiphiles on charged surfaces. In: Makromol chem, macromol symp, vol. 46. 1991. p. 321-7 [Eur conf organ org thin films, 3rd; 1990].
11. J. Schmitt, T. Gruenewald, G. Decher, P.S. Pershan, K. Kjaer, and M. Loesche Internal structure of layer-by-layer adsorbed polyelectrolyte films: a neutron and X-ray reflectivity study Macromolecules 26 25 1993 7058 7063
12. M. Onoda, and K. Yoshino Fabrication of self-assembled multilayer heterostructure of poly(p-phenylene vinylene) and its use for an electroluminescent diode J Appl Phys 78 7 1995 4456 4462
13. Y. Lvov, K. Ariga, I. Ichinose, and T. Kunitake Formation of ultrathin multilayer and hydrated gel from montmorillonite and linear polycations Langmuir 12 12 1996 3038 3044
14. N.A. Kotov, T. Haraszti, L. Turi, G. Zavala, R.E. Geer, and I. Dekany Mechanism of and defect formation in the self-assembly of polymeric polycation-montmorillonite ultrathin films J Am Chem Soc 119 29 1997 6821 6832
15. 2 and other nanoparticles and polyions Langmuir 13 23 1997 6195 6203
16. B. van Duffel, T. Verbiest, S. van Elshocht, A. Persoons, F.C. de Schryver, and R.A. Schoonheydt Fuzzy assembly and second harmonic generation of clay/polymer/dye monolayer films Langmuir 17 4 2001 1243 1249
17. Z. Lin, S. Renneckar, and D.P. Hindman Nanocomposite-based lignocellulosic fibers 1. Thermal stability of modified fibers with clay-polyelectrolyte multilayers Cellulose (Dordrecht, Neth) 15 2 2008 333 346
18. S. Renneckar, and Y. Zhou Nanoscale coatings on wood: polyelectrolyte adsorption and layer-by-layer assembled film formation ACS Appl Mater Interf 1 3 2009 559 566
19. L. Wagberg, S. Forsberg, A. Johansson, and P. Juntti Engineering of fibre surface properties by application of the polyelectrolyte multilayer concept. Part I. Modification of paper strength J Pulp Paper Sci 28 7 2002 222 228
20. M. Eriksson, S.M. Notley, and L. Wagberg The influence on paper strength properties when building multilayers of weak polyelectrolytes onto wood fibers J Colloid Interf Sci 292 1 2005 38 45
21. R. Lingstrom, L. Wagberg, and T. Larsson Per Formation of polyelectrolyte multilayers on fibres: influence on wettability and fibre/fibre interaction J Colloid Interf Sci 296 2 2006 396 408
22. Z. Lu, S. Eadula, Z. Zheng, K. Xu, G. Grozdits, and Y. Lvov Layer-by-layer nanoparticle coatings on lignocellulose wood microfibers Colloids Surf, A 292 1 2007 56 62
23. C.Q. Peng, Y.S. Thio, and R.A. Gerhardt Conductive paper fabricated by layer-by-layer assembly of polyelectrolytes and ITO nanoparticles Nanotechnology 19 50 2008 505603/1 505603/10
24. G. Michalowicz, B. Toussaint, and M.R. Vignon Ultrastructural changes in poplar cell wall during steam explosion treatment Holzforschung 45 3 1991 175 179
25. B.K. Avellar, and W.G. Glasser Steam-assisted biomass fractionation. I. Process considerations and economic evaluation Biomass Bioenergy 14 3 1998 205 218
26. B.V. Kokta, and A. Ahmed Advances in steam explosion pulping Cell Chem Technol 33 5-6 1999 455 471
27. W.G. Glasser, and R.S. Wright Steam-assisted biomass fractionation. II. Fractionation behavior of various biomass resources Biomass Bioenergy 14 3 1998 219 235
28. M. Tanahashi Characterization and degradation mechanisms of wood components by steam explosion and utilization of exploded wood Wood Res 77 1990 49 117
29. A. Okada, M. Kawasumi, T. Kurauchi, and O. Kamigaito Synthesis and characterization of a nylon 6-clay hybrid Polym Preprints (Am Chem Soc, Div Polym Chem) 28 2 1987 447 448
30. Okada A, Kawasumi M, Usuki A, Kojima Y, Kurauchi T, Kamigaito O. Nylon 6-clay hybrid. In: Mater res soc symp proc, vol. 171; 1990. p. 45-50 [polym based mol compos].
31. P.B. Messersmith, and E.P. Giannelis Synthesis and characterization of layered silicate-epoxy nanocomposites Chem Mater 6 10 1994 1719 1725
32. P.C. LeBaron, Z. Wang, and T.J. Pinnavaia Polymer-layered silicate nanocomposites: an overview Appl Clay Sci 15 1-2 1999 11 29
33. R.P. Overend, and E. Chornet Fractionation of lignocellulosics by steam-aqueous pretreatments Philos Trans R Soc London, A 321 1561 1987 523 536
34. W.G. Glasser, R. Taib, R.K. Jain, and R. Kander Fiber-reinforced cellulosic thermoplastic composites J Appl Polym Sci 73 7 1999 1329 1340
35. Lin Z, Nanocomposite-based lignocellulosic fibers, Ph.D. Dissertation. Blacksburg: Virginia Polytechnic Institute and State University; 2009.
36. P.V. Joseph, G. Mathew, K. Joseph, G. Groeninckx, and S. Thomas Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites Composites, Part A 34A 3 2003 275 290
37. Z. Tang, N.A. Kotov, S. Magonov, and B. Ozturk Nanostructured artificial nacre Nat Mater 2 6 2003 413 418
38. S.W. Tsai, and N.J. Pagano Invariant properties of composite materials 1968 Technomic Publishing Co. Lancaster, PA
39. J.A. Youngquist Wood handbook: wood as an engineering material 1999 US Department of Agriculture, Forest Service, Forest Products Laboratory Madison, WI
40. S. Yin, S. Wang, T.G. Rials, K.M. Kit, and M.G. Hansen Polypropylene composites filled with steam-exploded wood fibers from beetle-killed loblolly pine by compression-molding Wood Fiber Sci 39 1 2007 95 108
41. G.B. Nando, and B.R. Gupta Short fiber-thermoplastic elastomer composites J.R. White, S.K. De, Short fibre-polymer composites 1996 Woodhead Publishing Cambridge 84 115
42. A.J. Nunez, J.M. Kenny, M.M. Reboredo, M.I. Aranguren, and N.E. Marcovich Thermal and dynamic mechanical characterization of polypropylene-woodflour composites Polym Eng Sci 42 4 2002 733 742
43. M. Tajvidi, R.H. Falk, and J.C. Hermanson Effect of natural fibers on thermal and mechanical properties of natural fiber polypropylene composites studied by dynamic mechanical analysis J Appl Polym Sci 101 6 2006 4341 4349
44. D.G. Gray Polypropylene transcrystallization at the surface of cellulose fibers J Polym Sci, Polym Lett Ed 12 9 1974 509 515
45. V. Hristov, and S. Vasileva Dynamic mechanical and thermal properties of modified poly(propylene) wood fiber composites Macromol Mater Eng 288 10 2003 798 806
46. Y. Mi, X. Chen, and Q. Guo Bamboo fiber-reinforced polypropylene composites: crystallization and interfacial morphology J Appl Polym Sci 64 7 1997 1267 1273
47. D. Harper, and M. Wolcott Interaction between coupling agent and lubricants in wood-polypropylene composites Composites, Part A 35A 3 2004 385 394
48. H. Lee, and D.S. Kim Preparation and physical properties of wood/polypropylene/clay nanocomposites J Appl Polym Sci 111 6 2009 2769 2776