Determination of constitutive response of plastically graded materials

International Journal of Plasticity

Volumn 27, Issue 5, 2011, Pages 728-738

  Branch, Nathan A ^a   Arakere, Nagaraj K ^a   Subhash, Ghatu ^a   Klecka, Michael A ^a  

^a UNIVERSITY OF FLORIDA   (United States)

Author keywords

Constitutive response; Finite element analysis; Hardness; Plastically graded material; Vickers indentation

Indexed keywords

CARBON CONTENT; CONSTITUTIVE RESPONSE; EXPERIMENTAL AND NUMERICAL METHODS; FINITE ELEMENT ANALYSIS; GRADED MATERIALS; HARDNESS GRADIENT; HARDNESS PROFILES; LINEAR VARIATION; MICRO VICKERS HARDNESS; PLASTIC STRAIN; PLASTICALLY GRADED MATERIAL; PROPER DESIGN; ROLLING CONTACT FATIGUE; STRAIN-HARDENING EXPONENT; SUPERIOR RESISTANCE; SURFACE ENGINEERING; SURFACE HARDNESS; TRIBOLOGICAL PERFORMANCE; VICKERS INDENTATION; YIELD STRENGTH;

BOOSTERS (ROCKET); FINITE ELEMENT METHOD; IRIDIUM ALLOYS; NUMERICAL METHODS; STAINLESS STEEL; STRAIN HARDENING; TRIBOLOGY; VICKERS HARDNESS TESTING; YIELD STRESS;

VICKERS HARDNESS;

EID: 78650175955     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2010.09.001     Document Type: Article

References (36)

1. L. Anand, and N.M. Ames On modeling the micro-indentation response of an amorphous polymer Int. J. Plasticity 22 2006 1123 1170 (Pubitemid 43132940)
2. H. Boyer Case Hardening of Steels 1987 ASTM Metals Park, OH
3. Branch, N.A., Subhash, G., Arakere, N.K., Klecka, M.A., in press-a. Material dependent representative plastic strain for the prediction of indentation hardness. Acta Mater.
4. Branch, N.A., Subhash, G., Klecka, M.A., Arakere, N.K., in press-b. A new reverse analysis to determine the constitutive response of plastically graded steels. Int. J. Solids Struct.
5. T. Cao, and N. Huber Further investigation on the definition of the representative strain in conical indentation J. Mater. Res. 21 7 2006
6. Y.P. Cao, and J. Lu A new scheme for computational modeling of conical indentation in plastically graded materials J. Mater. Res. 19 6 2004
7. M.M. Chaudhri Subsurface strain distribution around Vickers hardness indentations in annealed polycrystalline copper Acta Mater. 46 9 1998
8. I.S. Choi, M. Dao, and S. Suresh Mechanics of indentation of plastically graded materials I: Analysis J. Mech. Phys. Solids 56 2008
9. I.S. Choi, A.J. Detor, R. Schwaiger, M. Dao, C.A. Schuh, and S. Suresh Mechanics of indentation of plastically graded materials II: Experiments on nanocrystalline alloys with grain size gradients J. Mech. Phys. Solids 56 2008
10. M.J. Cordill, M.S. Lund, J. Parker, C. Leighton, A.K. Nair, D. Farkas, N.R. Moody, and W.W. Gerberich The Nano-Jackhammer effect in probing near-surface mechanical properties Int. J. Plasticity 25 2009 2045 2058
11. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh Computational modeling of the forward and reverse problems in instrumented sharp indentation Acta Mater. 49 2001
12. Desault Systemes, 2007. ABAQUS Theory Manual, Dessault Systemes, Providence, RI.
13. A.C. Fischer-Cripps Analysis of instrumented indentation test data for functionally graded materials Surf. Coat. Technol. 168 2003
14. N.A. Fleck, and J.W. Hutchinson A reformulation of strain gradient plasticity J. Mech. Phys. Solids. 49 2001 2245 2271 (Pubitemid 32798093)
15. N.A. Fleck, G.M. Muller, M.F. Ashby, and J.W. Hutchinson Strain gradient plasticity: Theory and experiment Acta Metall. Mater. 42 1994 475
16. X.L. Gao, X.N. Jing, and G. Subhash Two new expanding cavity models for indentation deformations of elastic strain hardening materials Int. J. Solids Struct. 43 2006
17. A.E. Giannakopoulos Indentation of plastically graded substrates by sharp indenters Int. J. Solids Struct. 39 2002
18. Y. Gu, T. Nakamura, L. Prchlik, S. Sampath, and Wallace Micro-indentation and inverse analysis to characterize elastic-plastic graded materials J. Mater. Sci. Eng. A345 2003
19. R. Haj-Ali, H.K. Kim, S.W. Koh, A. Saxena, and R. Tummala Nonlinear constitutive models from nanoindentation tests using artificial neural networks Int. J. Plasticity 24 2008 371 396 (Pubitemid 350251670)
20. Y. Huang, S. Qu, K.C. Hwang, M. Li, and H. Gao A conventional theory of mechanism based strain gradient plasticity Int. J. Plasticity. 20 2004 753 782
21. S. Jayaraman, G.T. Hahn, W.C. Oliver, C.A. Rubin, and P.C. Bastias Determination of monotonic stress strain curve of hard materials from ultra low load indentation tests Int. J. Solids Struct. 35 56 1998
22. K.L. Johnson Contact Mechanics 1985 Cambridge University Press
23. B.J. Koeppel, and G. Subhash Characteristics of residual plastic zone under static and dynamic Vickers indentations Wear 224 1999 56 67
24. Y. Miyamoto, W.A. Kaysser, and B.H. Rabin Functionally Graded Materials: Design, Processing, and Applications 1999 Springer
25. T. Nakamura, T. Wang, and S. Sampath Determination of properties of graded materials by inverse analysis and instrumented indentation Acta Mater. 48 2000
26. A. Nayebi, R. El Abdi, O. Bartier, and G. Mauvoisin Hardness profile analysis of elasto-plastic heat treated steels with a gradient in yield strength Mater. Sci. Eng. A333 2002
27. N. Ogasawara, N. Chiba, and X. Chen Representative strain of indentation analysis J. Mater. Res. 20 8 2005
28. S. Qu, Y. Huang, G.M. Pharr, and K.C. Hwang The indentation size effect in the spherical indentation of iridium: A study via the conventional theory of mechanism-based strain gradient plasticity Int. J. Plasticity 22 2006 1265 1286 (Pubitemid 43290610)
29. Rashid K. Abu Al-Rub, and George Z. Voyiadjis Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro- and nano-indentation experiments Int. J. Plasticity 20 2004 1139 1182
30. Z. Shi, X. Feng, Y. Huang, J. Xiao, and K.C. Hwang The equivalent axisymmetric model for Berkovich indenters in power-law hardening materials Int. J. Plasticity 26 2010 141 148
31. C.S. Smith A History of Metallography 1960 MIT Press Cambridge, MA
32. G. Srikant, N. Chollacoop, and U. Ramamurty Plastic strain distribution underneath a Vickers indenter: Role of yield strength and work hardening exponent Acta Mater. 54 2006
33. S. Suresh, and A. Mortensen Fundamentals of Functionally Graded Materials 1998 Maney Materials Science
34. D. Tabor The Hardness of Solids Review of Physics in Technology 1 1970 145 179
35. A.E. Tekkaya An improved relationship between Vickers hardness and yield stress for cold formed materials and its experimental verification CIRP Ann. - Manufact. Technol. 1 1 2000 205 208
36. F. Zhang, R. Saha, Y. Huang, W.D. Nix, K.C. Hwang, S. Qu, and M. Li Indentation of a hard film on a soft substrate: Strain gradient hardening effects Int. J. plasticity 23 2007 25 43 (Pubitemid 44402984)