Investigation of influence of bearing load and bearing temperature on EDM bearing currents

2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings

Volumn , Issue , 2010, Pages 2733-2738

  Magdun, Oliver ^a   Gemeinder, Yves ^a   Binder, Andreas ^a  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Bearing failures; Bearing load; Bearing resistance; Bearing temperature; Critical thickness; EDM currents

Indexed keywords

BEARING FAILURES; BEARING LOADS; BEARING RESISTANCE; BEARING TEMPERATURE; CRITICAL THICKNESS; EDM CURRENT;

AC GENERATOR MOTORS; ELECTRIC DISCHARGES; ENERGY CONVERSION; INDUCTION MOTORS;

BEARINGS (STRUCTURAL);

EID: 78650137045     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ECCE.2010.5618061     Document Type: Conference Paper

References (19)

1. P.J. Tavner, "Review of condition monitoring of rotating electrical machines", IET Electric Power Applications, vol. 2, no. 4, pp. 215-247, 2008.
2. R. Hoppler, R.A. Errath, "Motor Bearings, not just a piece of metal", IEEE-IAS/PCA Cement Industry Conference, pp. 214-233, Charleston, USA, 29 April - 3 May 2007. (Pubitemid 350141377)
3. A. Binder, A. Muetze, "Scaling Effects of Inverter-Induced Bearing Currents in AC Machines", IEEE Transaction on Industry Application, vol. 44, pp. 769-776, 2008. (Pubitemid 351796123)
4. H. J. Conraths, F. Gießler, H. D. Heining, "Shaft-Voltages and Bearing Currents - New Phenomena in Inverter Driven Induction Machines", Proceedings of the 8th European Conference on Power Electronics and Applications EPE'99, CD-ROM, no. 165, Lausanne 1999.
5. V. Hausberg, H. O. Seinsch, "Schutzmaßnahmen gegen Lagerschaeden umrichtergespeister Motoren", Electrical Engineering, vol. 82, pp. 339- 345, Springer Press, 2000. (Pubitemid 32073830)
6. A. Muetze, A. Binder, H. Vogel, J. Hering, "Experimental evaluation of the endangerment of ball bearings due to inverter-induced bearing currents", Proceedings of the 39th IEEE IAS Annual Conf., vol.3, pp.1989-1995, Seattle, Washington, USA, October 3-7, 2004. (Pubitemid 40016558)
7. A. Muetze, A. Binder, "Dońt Lose Your Bearings - Mitigation techniques for bearing currents in inverter-supplied drive systems", IEEE IAS Magazine, vol. 12, no.4, pp. 22-31, July/August 2006.
8. J. Braendlein, P. Eschmann, L. Hasbargen, K. Weigand, "Die Wälzlagerpraxis", Vereinte Fachverlage GmbH, Mainz, 1998.
9. A. Kohaut, "Riffelbildung in Wälzlagern infolge elektrischer Korrosion", Zeitschrift fuer Angewandte Physik, Bd.1, H. 5, p. 197- 211, 1948.
10. S. Andreason, "Stromdurchgang durch Wälzlager", Kugellager- Zeitschrift (SKF), vol. 153, pp. 6-12, 1967.
11. A. Muetze, A. Binder, H. Voegel, J. Hering, "What can bearing bears?", IEEE Industry Application's Magazine, pp. 57-64, November/December, 2006.
12. T. A. Harris, M. N. Kotzalas, Advanced Concepts of Bearing Technology, CRC Press, New York, 2006.
13. A. Muetze, "Bearing Currents in Inverter-Fed AC Motors", Ph.D. thesis, Darmstadt Univ. of Technology, Shaker Verlag, Aachen, 2004.
14. A. Harnoy, Bearing Design in Machinery: Engineering Tribology and Lubrication, CRC Press, New York, 2002.
15. O. Magdun, A. Binder, "Calculation of Roller and Ball Bearing Capacitances and Prediction of EDM currents", Proceedings of the 35th IEEE Annual Conf. IE, pp.1051-1056, Porto, Portugal, November 3-5, 2009.
16. J. Kuffel, E. Kuffel, W. S. Zaengl, High Voltage Engineering Fundamentals, Elsevier Ltd., 2000.
17. D. Busse, J.Erdman, R.J. Kerkman, D. Schlegel, G.Skibinski, "The Effects of PWM Voltage Source Inverters on the Mechanical Performances of Rolling Bearings", IEEE Transactions on Industry Applications, vol. 33, no. 2, pp. 567-576, March/Apri1 1997. (Pubitemid 127828213)
18. J.D. Lavers, R.S. Timsit, "Constriction Resistance at High Signal Frequencies", IEEE Transactions on Components and Packaging Technologies, vol. 25, no. 3, pp. 446-452, September 2002.
19. O. Magdun, A. Binder, Y. Gemeinder, "Representation of Iron Core and Dielectric Losses for Calculation of Common Mode Stator Ground Currents in Inverter-Fed AC machines", Proceedings of OPTIM'10, pp.371-376, Brasov, Romania, May 20-22, 2010.