Advanced concepts of bearing technology: Rolling bearing analysis, fifth edition

Advanced Concepts of Bearing Technology: Rolling Bearing Analysis, Fifth Edition

Volumn , Issue , 2006, Pages 1-353

  Harris, Tedric A ^a   Kotzalas, Michael N ^b  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b TIMKEN COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056054847     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (251)

1. Jones, A., Analysis of Stresses and Deflections, New Departure Engineering Data, Bristol, CT, 1946.
2. Lundberg, G. and Sjövall, H., Stress and Deformation in Elastic Contacts, Pub. 4, Institute of Elasticity and Strength of Materials, Chalmers Inst. Tech., Gothenburg, Sweden, 1958.
3. Reussner, H., Druckflächenbelastnung und Overflächenverschiebung in Wälzkontact von Rotätionkörpern, Dissertation Schweinfurt, Germany, 1977.
4. Palmgren, A., Ball and Roller Bearing Engineering, 3rd ed., Burbank, Philadelphia, 1959.
5. Harris, T., The effect of misalignment on the fatigue life of cylindrical roller bearings having crowned rolling members, ASME Trans. J. Lub. Technol., 294-300, April 1969.
6. Harris, T., The endurance of a thrust-loaded, double row, radial cylindrical bearing, Wear, 18, 429-438, 1971.
7. Harris, T., Kotzalas, M., and Yu, W.-K., On the causes and effects of roller skewing in cylindrical roller bearings, Trib. Trans., 41(4), 572-578, 1998.
8. Thomas, H. and Hoersch, V., Stresses due to the pressure of one elastic solid upon another, Univ. Illinois Bull., 212, July 15, 1930.
9. Hartnett, M., The analysis of contact stress in rolling element bearings, ASME Trans. J. Lub. Technol., 101, 105-109, January 1979.
10. Jones, A. and Harris, T., Analysis of a rolling element idler gear bearing having a deformable outer race structure, ASME Trans. J. Basic Eng., 273-278, June 1963.
11. Harris, T., Optimizing the design of cluster mill rolling bearings, ASLE Trans., 7, April 1964.
12. Harris, T. and Broschard, J., Analysis of an improved planetary gear transmission bearing, ASME Trans. J. Basic Eng., 457-462, September 1964.
13. Timoshenko, S., Strength of Materials, Part I, 3rd ed., Van Nostrand, New York, 1955.
14. Lutz, W., Discussion of Ref. 7, presented at ASME Spring Lubrication Symposium, Miami Beach, FL, June 5, 1962.
15. Eimer, H., Aus dem Gebiet der Wälzlagertechnik, Semesterentwurf, Technische Hochschule, München, June 1964.
16. Zhao, H., Analysis of load distributions within solid and hollow roller bearings, ASME Trans. J. Tribol., 120, 134-139, January 1998.
17. Bourdon, A., Rigal, J., and Play, D., Static rolling bearing models in a C.A.D. environment for the study of complex mechanisms: Part I-rolling bearing model, ASME Trans. J. Tribol., 121, 205-214, April 1999.
18. Bourdon, A., Rigal, J., and Play, D., Static rolling bearing models in a C.A.D. environment for the study of complex mechanisms: Part II-complete assembly model, ASME Trans. J. Tribol., 121, 215-223, April 1999.
19. Lundberg, G., Motions in loaded rolling element bearings, SKF unpublished report, 1954.
20. Jones, A., Ball motion and sliding friction in ball bearings, ASME Trans. J. Basic Eng., 81, 1959.
21. Harris, T., An analytical method to predict skidding in thrust loaded, angular-contact ball bearings, ASME Trans. J. Lubrication Technol., 17-24, January 1971.
22. Harris, T., Ball motion in thrust-loaded, angular-contact bearings with coulomb friction, ASME J. Lubrication Technol., 93, 17-24, 1971.
23. Palmgren, A., Ball and Roller Bearing Engineering, 3rd ed., Burbank, Philadelphia, 1959, pp. 70-72.
24. Kleckner, R. and Pirvics, J., High speed cylindrical roller bearing analysis-SKF Computer Program CYBEAN, Vol. 1: Analysis, SKF Report AL78P022, NASA Contract NAS3-20068, July 1978.
25. Jones, A., General theory for elastically constrained ball and roller bearings under arbitrary load and speed conditions, ASME Trans., J. Basic Eng., 82, 1960.
26. Harris, T., On the effectiveness of hollow balls in high-speed thrust bearings, ASLE Trans., 11, 209-214, 1968.
27. Harris, T., Optimizing the fatigue life of flexibly mounted rolling bearings, Lub. Eng., 420-428, October 1965.
28. Harris, T. and Aaronson, S., An analytical investigation of cylindrical roller bearings having annular rollers, ASLE Preprint No. 66LC-26, October 18, 1966.
29. Harris, T. and Mindel, M., Rolling element bearing dynamics, Wear, 23(3), 311-337, February 1973.
30. Martin, H., Lubrication of gear teeth, Engineering, 102, 199, 1916.
31. Osterle, J., On the hydrodynamic lubrication of roller bearings, Wear, 2, 195, 1959.
32. Barus, C., Isothermals, isopiestics, and isometrics relative to viscosity, Am. J. Sci., 45, 87-96, 1893.
33. ASME Research Committee on Lubrication, Pressure-viscosity report-Vol. 11, ASME, 1953.
34. Roelands, C., Correlation Aspects of Viscosity-Temperature-Pressure Relationship of Lubricating Oils, Ph.D. Thesis, Delft University of Technology, 1966.
35. Sorab, J. and VanArsdale, W., A correlation for the pressure and temperature dependence of viscosity, Tribol. Trans., 34(4), 604-610, 1991.
36. Bair, S. and Kottke, P., Pressure-viscosity relationships for elastohydrodynamics, Preprint AM03-1, STLE Annual Meeting, New York, 2003.
37. Doolittle, A., Studies in Newtonian flow II, the dependence of the viscosity of liquids on free-space, J. Appl. Phys., 22, 1471-1475, 1951.
38. Harris, T., Establishment of a new rolling bearing life calculation method, Final Report, U.S. Navy Contract N68335-93-C-0111, January 15, 1994.
39. Bair, S. and Winer, W., Shear strength measurements of lubricants at high pressure, Trans. ASME, J. Lubr. Technol., Ser. F, 101, 251-257, 1979.
40. Bair, S. and Winer, W., Some observations in high pressure rheology of lubricants, Trans. ASME, J. Lubr. Technol., Ser. F, 104, 357-364, 1982.
41. Dowson, D. and Higginson, G., A numerical solution to the elastohydrodynamic problem, J. Mech. Eng. Sci., 1(1), 6, 1959.
42. Grubin, A., Fundamentals of the hydrodynamic theory of lubrication of heavily loaded cylindrical surfaces, Investigation of the Contact Machine Components, Kh. F. Ketova (ed.) [Translation of Russian Book No. 30, Chapter 2], Central Scientific Institute of Technology and Mechanical Engineering, Moscow, 1949.
43. Dowson, D. and Higginson, G., The effect of material properties on the lubrication of elastic rollers, J. Mech. Eng. Sci., 2(3), 1960.
44. Sibley, L. and Orcutt, F., Elastohydrodynamic lubrication of rolling contact surfaces, ASLE Trans., 4, 234-249, 1961.
45. Dowson, D. and Higginson, G., Proc. Inst. Mech. Eng., 182(Part 3A), 151-167, 1968.
46. Archard, G. and Kirk, M., Lubrication at point contacts, Proc. R. Soc. Ser. A, 261, 532-550, 1961.
47. Hamrock, B. and Dowson, D., Isothermal elastohydrodynamic lubrication of point contacts-Part III-fully flooded results, Trans. ASME, J. Lubr. Technol., 99, 264-276, 1977.
48. Wedeven, L., Optical Measurements in Elastohydrodynamic Rolling Contact Bearings, Ph.D. Thesis, University of London, 1971.
49. Kotzalas, M., Power Transmission Component Failure and Rolling Contact Fatigue, Ph.D. Thesis, Pennsylvania State University, 1999.
50. Avallone, E. and Baumeister, T., Standard Handbook for Mechanical Engineers, 9th ed., McGraw-Hill, New York, 1987.
51. Venner, C., Higher order mutlilevel solvers for the EHL line and point contact problems, ASME Trans., J. Tribol., 116, 741-750, 1994.
52. Smeeth, S. and Spikes, H., Central and minimum elastohydrodynamic film thickness at high contact pressure, ASME Trans., J. Tribol., 119, 291-296, 1997.
53. Cheng, H., A numerical solution to the elastohydrodynamic film thickness in an elliptical contact, Trans. ASME, J. Lubr. Technol., 92, 155-162, 1970.
54. Vogels, H., Das Temperaturabhängigkeitsgesetz der Viscositä t von Flïssigkeiten, Phys. Z., 22, 645-646, 1921.
55. Cheng, H., A refined solution to the thermal-elastohydrodynamic lubrication of rolling and sliding cylinders, ASLE Trans., 8(4), 397-410, 1965.
56. Murch, L. and Wilson, W., A thermal elastohydrodynamic inlet zone analysis, Trans. ASME, J. Lubr. Technol., Ser. F, 97(2), 212-216, 1975.
57. Wilson, A., An experimental thermal correction for predicted oil film thickness in elastohydrodynamic contacts, Proc. 6th Leeds-Lyon Symp. Tribol., 1979.
58. Wilson, W. and Sheu, S., Effect of inlet shear heating due to sliding on elastohydrodynamic film thickness, Trans. ASME, J. Lubr. Technol., Ser. F, 105(2), 187-188, 1983.
59. Gupta, P., et al., Viscoelastic effects in Mil-L-7808 type lubricant, Part I: Analytical formulation, Tribol. Trans., 35(2), 269-274, 1992.
60. Hsu, C. and Lee, R., An efficient algorithm for thermal elastohydrodynamic lubrication under rolling/sliding line contacts, J. Vibr. Acoust. Reliab. Des., 116(4), 762-768, 1994.
61. MacAdams, W., Heat Transmission, 3rd ed., McGraw-Hill, New York, 1954.
62. Goksem, P. and Hargreaves, R., The effect of viscous shear heating in both film thickness and rolling traction in an EHL line contact-Part II: Starved condition, Trans. ASME, J. Lubr. Technol., 100, 353-358, 1978.
63. Dowson, D., Inlet boundary conditions, Leeds-Lyon Symp., 1974.
64. Wolveridge, P., Baglin, K., and Archard, J., The starved lubrication of cylinders in line contact, Proc. Inst. Mech. Eng., 185, 1159-1169, 1970-1971.
65. Castle, P. and Dowson, D., A theoretical analysis of the starved elastohydrodynamic lubrication problem, Proc. Inst. Mech. Eng., 131, 131-137, 1972.
66. Hamrock, B. and Dowson, D., Isothermal elastohydrodynamic lubrication of point contact-Part IV: Starvation results, Trans. ASME, J. Lubr. Technol., 99, 15-23, 1977.
67. McCool, J., Relating profile instrument measurements to the functional performance of rough surfaces, Trans. ASME, J. Tribol., 109, 271-275, April 1987.
68. Patir, N. and Cheng, H., Effect of surface roughness orientation on the central film thickness in EHD contacts, Proc. 5th Leeds-Lyon Symp. Tribol., 15-21, 1978.
69. Tønder, P. and Jakobsen, J., Interferometric studies of effects of striated roughness on lubricant film thickness under elastohydrodynamic conditions, Trans. ASME, J. Tribol., 114, 52-56, January 1992.
70. Kaneta, M., Sakai, T., and Nishikawa, H., Effects of surface roughness on point contact EHL, Tribol. Trans., 36(4), 605-612, 1993.
71. Chang, L., Webster, M., and Jackson, A., On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces, Trans. ASME, J. Tribol., 115, 439-444, July 1993.
72. Ai, X. and Cheng, H., The effects of surface texture on EHL point contacts, Trans. ASME, J. Tribol., 118, 59-66, January 1996.
73. Guangteng, G. and Spikes, H., An experimental study of film thickness in the mixed lubrication regime, Proc. 24th Leeds-Lyon Symp., Elastohydrodynamics, 159-166, September 1996.
74. Cann, P., Hutchinson, J., and Spikes, H., The development of a spacer layer imaging method (SLIM) for mapping elastohydrodynamic contacts, Tribol. Trans., 39, 915-921, 1996.
75. Guangteng, G., et al., Lubricant film thickness in rough surface, mixed elastohydrodynamic contact, ASME Paper 99-TRIB-40, October 1999.
76. Wilson, A., The relative thickness of grease and oil films in rolling bearings, Proc. Inst. Mech. Eng., 193, 185-192, 1979.
77. Mïnnich, H. and Glöckner, H., Elastohydrodynamic lubrication of grease-lubricated rolling bearings, ASLE Trans., 23, 45-52, 1980.
78. Palacios, J., Cameron, A., and Arizmendi, L., Film thickness of grease in rolling contacts, ASLE Trans., 24, 474-478, 1981.
79. Palacios, J., Elastohydrodynamic films in mixed lubrication: an experimental investigation, Wear, 89, 303-312, 1983.
80. Kauzlarich, J. and Greenwood, J., Elastohydrodynamic lubrication with Herschel-Bulkley model reases, ASLE Trans., 15, 269-277, 1972.
81. Palacios, J. and Palacios, M., Rheological properties of greases in EHD contacts, Tribol. Int., 17, 167-171, 1984.
82. Cann, P., Starvation and reflow in a grease-lubricated elastohydrodynamic contact, Tribol. Trans., 39(3), 698-704, 1996.
83. Cann, P., Starved grease lubrication of rolling contacts, Tribol. Trans., 42(4), 867-873, 1999.
84. Dowson, D. and Higginson, G., Theory of roller bearing lubrication and deformation, Proc. Inst. Mech. Eng., 117, 1963.
85. Markho, P. and Clegg, D., Reflections on some aspects of lubrication of concentrated line contacts, Trans. ASME, J. Lubr. Technol., 101, 528-531, 1979.
86. Dalmaz, G., Le Film Mince Visquex dans les Contacts Hertziens en Regimes Hydrodynamique et Elastohydrodynamique, Docteur d’Etat Es Sciences Thesis, I.N.S.A. Lyon, 1979.
87. Brewe, D. and Hamrock, B., Analysis of starvation on hydrodynamic lubrication in non-conforming contacts, ASME Paper 81-LUB-52, 1981.
88. Drutowski, R., Energy losses of balls rolling on plates, Friction and Wear, Elsevier, Amsterdam, 1959, pp. 16-35.
89. Greenwood, J. and Tabor, D., Proc. Phys. Soc. London, 71, 989, 1958.
90. Drutowski, R., Linear dependence of rolling friction on stressed volume, Rolling Contact Phenomena, Elsevier, Amsterdam, 1962.
91. Reynolds, O., Philos. Trans. R. Soc. London, 166, 155, 1875.
92. Poritsky, H., J. Appl. Mech., 72, 191, 1950.
93. Cain, B., J. Appl. Mech., 72, 465, 1950.
94. Heathcote, H., Proc. Inst. Automob. Eng., London, 15, 569, 1921.
95. Johnson, K., Tangential tractions and micro-slip, Rolling Contact Phenomena, Elsevier, Amsterdam, 1962, pp. 6-28.
96. Sasaki, T., Mori, H., and Okino, N., Fluid lubrication theory of rolling bearings parts I and II, ASME Trans., J. Basic Eng., 166, 175, 1963.
97. Bell, J., Lubrication of rolling surfaces by a Ree-Eyring fluid, ASLE Trans., 5, 160-171, 1963.
98. Smith, F., Rolling contact lubrication-the application of elastohydrodynamic theory, ASME Paper 64-Lubs-2, April 1964.
99. Gecim, B. and Winer, W., A film thickness analysis for line contacts under pure rolling conditions with a non-Newtonian rheological model, ASME Paper 80C2=LUB 26, August 8, 1980.
100. Houpert, L., New results of traction force calculations in EHD contacts, ASME Trans., J. Lubr. Technol., 107(2), 241, 1985.
101. Evans, C. and Johnson, K., The rheological properties of EHD lubricants, Proc. Inst. Mech. Eng., 200(C5), 303-312, 1986.
102. Bair, S. and Winer, W., A rheological model for elastohydrodynamic contacts based on primary laboratory data, ASME Trans., J. Lubr. Technol., 101(3), 258-265, 1979.
103. Johnson, K. and Cameron, A., Proc. Inst. Mech. Eng., 182(1), 307, 1967.
104. Schipper, D., et al., Micro-EHL in lubricated concentrated contacts, ASME Trans., J. Tribol., 112, 392-397, 1990.
105. Trachman, E. and Cheng, H., Thermal and non-Newtonian effects on traction in elastohydrodynamic contacts, Proc. Inst. Mech. Eng., 2nd Symposium on Elastohydrodynamic Lubrication, Leeds, 1972, pp. 142-148.
106. Tevaarwerk, J. and Johnson, K., A simple non-linear constitutive equation for EHD oil films, Wear, 35, 345-356, 1975.
107. Harris, T. and Barnsby, R., Tribological performance prediction of aircraft turbine mainshaft ball bearings, Tribol. Trans., 41(1), 60-68, 1998.
108. Greenwood, J. and Williamson, J., Contact of nominally flat surfaces, Proc. R. Soc. London, Ser. A., 295, 300-319, 1966.
109. Bush, A., Gibson, R., and Thomas, T., The elastic contact of a rough surface, Wear, 35, 87-111, 1975.
110. O’Callaghan, M. and Cameron, M., Static contact under load between nominally flat surfaces, Wear, 36, 79-97, 1976.
111. Bush, A., Gibson, R., and Keogh, G., Strongly anisotropic rough surfaces, ASME paper 78-LUB-16, 1978.
112. McCool, J. and Gassel, S., The contact of two surfaces having anisotropic roughness geometry, ASLE Special Publication (SP-7), 29-38, 1981.
113. McCool, J., Comparison of models for the contact of two surfaces having anisotropic roughness geometry, Wear, 107, 7-60, 1986.
114. Nayak, P., Random process model of rough surfaces, ASME Trans., J. Tribol., 93F, 398-407, 1971.
115. Sayles, R. and Thomas, T., Thermal conductances of a rough elastic contact, Appl. Energy, 2, 249-267, 1976.
116. Harris, T., Establishment of a new rolling bearing fatigue life calculation model, Final Report U.S. Navy Contract N00421-97-C-1069, February 23, 2002.
117. Jones, A., Motions in loaded rolling element bearings, ASME Trans., J. Basic Eng., 1-12, 1959.
118. Harris, T., An analytical method to predict skidding in thrust-loaded, angular-contact ball bearings, ASME Trans., J. Lubr. Techol., 93, 17-24, 1971.
119. Harris, T., Rolling element bearing dynamics, Wear, 23, 311-337, 1973.
120. Streeter, V., Fluid Mechanics, McGraw-Hill, New York, 313-314, 1951.
121. Parker, R., Comparison of predicted and experimental thermal performance of angular-contact ball bearings, NASA Tech. Paper 2275, 1984.
122. Bisson, E. and Anderson, W., Advanced Bearing Technology, NASA SP-38, 1964.
123. Rydell, B., New spherical roller thrust bearings, the e design, Ball Bear. J., SKF, 202, 1-7, 1980.
124. Brown, P., et al., Mainshaft high speed cylindrical roller bearings for gas turbine engines, U.S. Navy Contract N00140-76-C-0383, Interim Report FR-8615, April 1977.
125. Harris, T., Ball motion in thrust-loaded, angular-contact ball bearings with coulomb friction, ASME Trans., J. Lubr. Technol., 93, 32-38, 1971.
126. Harris, T., An analytical method to predict skidding in thrust-loaded angular-contact ball bearings, ASME Trans., J. Lubr. Technol., 93, 17-24, 1971.
127. Shevchenko, R. and Bolan, P., Visual study of ball motion in a high speed thrust bearing, SAE Paper No. 37, January 14-18, 1957.
128. Poplawski, J. and Mauriello, J., Skidding in lightly loaded, high speed, ball thrust bearings, ASME Paper 69-LUBS-20, 1969.
129. Harris, T., An analytical method to predict skidding in high speed roller bearings, ASLE Trans., 9, 229-241, 1966.
130. Harris, T. and Aaronson, S., An analytical investigation of skidding in a high-speed, cylindrical roller bearing having circumferentially spaced, preloaded hollow rollers, Lub. Eng., 30-34, January 1968.
131. Walters, C., The dynamics of ball bearings, ASME Trans., J. Lubr. Technol., 93(1), 1-10, January 1971.
132. Wellons, F. and Harris, T., Bearing design considerations, Interdisciplinary Approach to the Lubrication of Concentrated Contacts, NASA SP-237, 1970, pp. 529-549.
133. Kleckner, R. and Pirvics, J., High speed cylindrical roller bearing analysis-SKF computer program CYBEAN, Vol. 1: analysis, SKF Report AL78P022, NASA Contract NAS3-20068, July 1978.
134. Kannel, J. and Bupara, S., A simplified model of cage motion in angular-contact bearings operating in the EHD lubrication regime, ASME Trans., J. Lubr. Technol., 100, 395-403, July 1078.
135. Gupta, P., Dynamics of rolling element bearings-Part I-IV. cylindrical roller bearing analysis, ASME Trans., J. Lubr. Technol., 101, 293-326, 1979.
136. Meeks, C. and Ng, K., The dynamics of ball separators in ball bearings-Part I: analysis, ASLE Paper No. 84-AM-6C-2, May 1984.
137. Meeks, C., The dynamics of ball separators in ball bearings-Part II: results of optimization study, ASLE Paper No. 84-AM-6C-3, May 1984.
138. Mauriello, J., et al., Rolling element bearing retainer analysis, U.S. Army AMRDL Technical Report 72-45, November 1973.
139. Kellstrom, M. and Blomquist, E., Roller bearings comprising rollers with positive skew angle, U.S. Patent 3,990,753, 1979.
140. Kellstrom, M., Rolling contact guidance of rollers in spherical roller bearings, ASME Paper 79-LUB-23, 1979.
141. Harris, T., Establishment of a new rolling bearing fatigue life calculation model, Final Report U.S. Navy Contract N00421-97-C-1069, February 23, 2002.
142. Eckert, E., Introduction to the Transfer of Heat and Mass, McGraw-Hill, New York, 1950.
143. Jakob, M. and Hawkins, G., Elements of Heat Transfer and Insulation, 2nd Ed., Wiley, New York, 1950.
144. Palmgren, A., Ball and Roller Bearing Engineering, 3rd Ed., Burbank, Philadelphia, 1959.
145. Kreith, F., Convection heat transfer in rotating systems, Adv. Heat Transfer, 5, 129-251, 1968.
146. Dusinberre, G., Numerical Methods in Heat Transfer, McGraw-Hill, New York, 1949.
147. Korn, G. and Korn, T., Mathematical Handbook for Scientists and Engineers, McGraw-Hill, New York, 1961.
148. SKF, General Catalog 4000 US, 2nd Ed., 49, 1997.
149. Harris, T., Prediction of temperature in a rolling bearing assembly, Lubr. Eng., 145-150, April 1964.
150. Harris, T., How to predict temperature increases in rolling bearings, Prod. Eng., 89-98, December 9, 1963.
151. Pirvics, J. and Kleckner, R., Prediction of ball and roller bearing thermal and kinematic performance by computer analysis, Adv. Power Transmission Technol., NASA Conference Publication 2210, 185-201, 1982.
152. Coe, H., Predicted and experimental performance of large-bore high speed ball and roller bearings, Adv. Power Transmission Technol., NASA Conference Publication 2210, 203-220, 1982.
153. Kleckner, R. and Dyba, G., High speed spherical roller bearing analysis and comparison with experimental performance, Adv. Power Transmission Technol., NASA Conference Publication 2210, 239-252, 1982.
154. Crecelius, W., User’s manual for SKF computer program SHABERTH, steady state and transient thermal analysis of a shaft bearing system including ball, cylindrical, and tapered roller bearings, SKF Report AL77P015, submitted to U.S. Army Ballistic Research Laboratory, February 1978.
155. Parker, R., Comparison of predicted and experimental thermal performance of angular-contact ball bearings, NASA Technical Paper 2275, February 1984.
156. Harris, T. and Barnsby, R. Tribological performance prediction of aircraft gas turbine mainshaft ball bearings, Tribol. Trans., 41(1), 60-68, 1998.
157. Lundberg, G. and Palmgren, A., Dynamic capacity of rolling bearings, Acta Polytech. Mech. Eng. Ser. 1, Roy. Swed. Acad. Eng., 3(7), 1947.
158. Lundberg, G. and Palmgren, A., Dynamic capacity of roller bearings, Acta Polytech. Mech. Eng. Ser. 2, Roy. Swed. Acad. Eng., 9(49), 1952.
159. American National Standards Institute, American National Standard (ANSI/ABMA) Std. 9-1990, Load ratings and fatigue life for ball bearings, July 17, 1990.
160. American National Standards Institute, American National Standard (ANSI/ABMA) Std.11-1990, Load ratings and fatigue life for roller bearings, July 17, 1990.
161. International Organization for Standards, International Standard ISO 281, Rolling bearings-dynamic load ratings and rating life, 2006.
162. Harris, T., Prediction of ball fatigue life in a ball/v-ring test rig, ASME Trans., J. Tribol., 119, 365-374, July 1997.
163. Harris, T., How to compute the effects of preloaded bearings, Prod. Eng., 84-93, July 19, 1965.
164. Jones, A. and Harris, T., Analysis of rolling element idler gear bearing having a deformable outer race structure, ASME Trans., J. Basic Eng., 273-277, June 1963.
165. Harris, T. and Broschard, J., Analysis of an improved planetary gear transmission bearing, ASME Trans., J. Basic Eng., 457-462, September 1964.
166. Harris, T., Optimizing the fatigue life of flexibly mounted, rolling bearings, Lubr. Eng., 420-428, October 1965.
167. Harris, T., The effect of misalignment on the fatigue life of cylindrical roller bearings having crowned rolling members, ASME Trans., J. Lubr. Technol., 294-300, April 1969.
168. Tallian, T., Sibley, L., and Valori, R., Elastohydrodynamic film effects on the load-life behavior of rolling contacts, ASME Paper 65-LUBS-11, ASME Spring Lubr. Symp., NY, June 8, 1965.
169. Skurka, J., Elastohydrodynamic lubrication of roller bearings, ASME Paper 69-LUB-18, 1969.
170. Tallian, T., Theory of partial elastohydrodynamic contacts, Wear, 21, 49-101, 1972.
171. Harris, T., The endurance of modern rolling bearings, AGMA Paper 269.01, Am. Gear Manufac. Assoc. Rol. Bear. Symp., Chicago, October 26, 1964.
172. Bamberger, E., et al., Life Adjustment Factors for Ball and Roller Bearings, AMSE Engineering Design Guide, 1971.
173. Schouten, M., Lebensduur van Overbrengingen, TH Eindhoven, November 10, 1976.
174. STLE, Life Factors for Rolling Bearings, E. Zaretsky, Ed., 1992.
175. Ville, F. and Nélias, D., Early fatigue failure due to dents in EHL contacts, Presented at the STLE Annual Meeting, Detroit, May 17-21, 1998.
176. Webster, M., Ioannides, E., and Sayles, R., The effect of topographical defects on the contact stress and fatigue life in rolling element bearings, Proc. 12th Leeds-Lyon Symp. Tribol., 207-226, 1986.
177. Hamer, J., Sayles, R., and Ioannides E., Particle deformation and counterface damage when relatively soft particles are squashed between hard anvils, Tribol. Trans., 32(3), 281-288, 1989.
178. Sayles, R., Hamer, J., and Ioannides, E., The effects of particulate contamination in rolling bearings-a state of the art review, Proc. Inst. Mech. Eng., 204, 29-36, 1990.
179. Nélias, D. and Ville, F., Deterimental effects of dents on rolling contact fatigue, ASME Trans., J. Tribol., 122, 1, 55-64, 2000.
180. Xu, G., Sadeghi, F., and Hoeprich, M., Dent initiated spall formation in EHL rolling/sliding contact, ASME Trans., J. Tribol., 120, 453-462, July 1998.
181. Sayles, R. and MacPherson, P., Influence of wear debris on rolling contact fatigue, ASTM Special Technical Publication 771, J. Hoo, Ed., 255-274, 1982.
182. Tanaka, A., Furumura, K., and Ohkuna, T., Highly extended life of transmission bearings of ‘sealed-clean’ concept, SAE Technical Paper, 830570, 1983.
183. Needelman, W. and Zaretsky, E., New equations show oil filtration effect on bearing life, Pow. Transmis. Des., 33(8), 65-68, 1991.
184. Barnsby, R., et al., Life ratings for modern rolling bearings, ASME Paper 98-TRIB-57, presented at the ASME/STLE Tribology Conference, Toronto, October 26, 1998.
185. Tallian, T., On competing failure modes in rolling contact, ASLE Trans., 10, 418-439, 1967.
186. Voskamp, A., Material response to rolling contact loading, ASME Paper 84-TRIB-2, 1984.
187. Ioannides, E. and Harris, T., A new fatigue life model for rolling bearings, ASME Trans., J. Tribol., 107, 367-378, 1985.
188. Harris, T. and McCool, J., On the accuracy of rolling bearing fatigue life prediction, ASME Trans., J. Tribol., 118, 297-310, April 1996.
189. Harris, T., Prediction of ball fatigue life in a ball/v-ring test rig, ASME Trans., J. Tribol., 119, 365-374, July 1997.
190. Barnsby, R., et al., Life Ratings for Modern Rolling Bearings-A Design Guide for the Application of International Standard ISO 281/2, ASME Publication TRIB-Vol 14, New York, 2003.
191. Juvinall, R. and Marshek, K., Fundamentals of Machine Component Design, 2nd ed., Wiley, New York, 1991.
192. Thomas, H. and Hoersch, V., Stresses due the pressure of one elastic solid upon another, Univ. Illinois, Bull., 212, July 15, 1930.
193. Nélias, D., et al., Experimental and theoretical investigation of rolling contact fatigue of 52100 and M50 steels under EHL or micro-EHL conditions, ASME Trans., J. Tribol., 120, 184-190, April 1998.
194. Ahmadi, N., et al., The interior stress field caused by tangential loading of a rectangular patch on an elastic half space, ASME Trans., J. Tribol., 109, 627-629, 1987.
195. Ai, X. and Cheng, H., The influence of moving dent on point EHL contacts, Tribol. Trans., 37(2), 323-335, 1994.
196. Ioannides, E., Bergling, G., and Gabelli, A., An analytical formulation for the life of rolling bearings, Acta Polytech. Scand., Mech. Eng. Series No. 137, Finnish Institute of Technology, 1999.
197. International Organization for Standards, International Standard ISO 4406, Hydraulic fluid power-fluids-method for coding level of contamination by solid particles, 1999.
198. International Organization for Standards, International Standard ISO 4372, Hydraulic fluid power-filters-multi-pass method for evaluating filtration performance, 1981.
199. SKF, General Catalog 4000 US, 2nd ed., 1997.
200. Nélias, D., Contribution a L’etude des Roulements, Dossier d’Habilitation a Diriger des Recherches, Laboratoire de Mécanique des Contacts, UMR-CNRS-INSA de Lyon No. 5514, December 16, 1999.
201. American National Standards Institute, American National Standard (ABMA/ANSI) Std 7-1972, Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller Bearings) 1972.
202. American National Standards Institute, American National Standard (ABMA/ANSI) Std 19.1-1987, Tapered Roller Bearings-Radial, Metric Design, October 19, 1987.
203. American National Standards Institute, American National Standard (ABMA/ANSI) Std 19.2-1994, Tapered Roller Bearings-Radial, Inch Design, May 12, 1994.
204. Timoshenko, S., Strength of Materials, Part I, Elementary Theory and Problems, Van Nostrand, 1955.
205. Society of Automotive Engineers, Residual stress measurements by X-ray diffraction, SAE J784a, 2nd ed., New York, 1971.
206. Koistinen, D., The distribution of residual stresses in carburized cases and their origins, Trans. ASM, 50, 227-238, 1958.
207. Gentile, A., Jordan, E., and Martin, A., Phase transformations in high-carbon high-hardness steels under contact loads, Trans. AIME, 233, 1085-1093, June 1965.
208. Bush, J., Grube, W., and Robinson, G., Microstructural and residual stress changes in hardened steel due to rolling contact, Trans. ASM, 54, 390-412, 1961.
209. Muro, H. and Tsushima, N., Microstructural, microhardness and residual stress changes due to rolling contact, Wear, 15, 309-330, 1970.
210. Voskamp, A., et al., Gradual changes in residual stress and microstructure during contact fatigue in ball bearings, Metal. Tech., 14-21, January 1980.
211. Zaretsky, E., Parker, R., and Anderson, W., A study of residual stress induced during rolling, J. Lub. Tech., 91, 314-319, 1969.
212. Harris, T., Establishment of a new rolling bearing fatigue life calculation model, Final Report U.S. Navy Contract N00421-97-C-1069, February 23, 2002.
213. Harris, T. and Yu, W.-K., Lundberg-Palmgren fatigue theory: considerations of failure stress and stressed volume, ASME Trans., J. Tribol., 121, 85-89, 1999.
214. Böhmer, H.-J., et al., The influence of heat generation in the contact zone on bearing fatigue behavior, ASME Trans., J. Tribol., 121, 462-467, July 1999.
215. Palmgren, A., The service life of ball bearings, Zeitschrift des Vereines Deutscher Ingenieure, 68(14), 339-341, 1924.
216. Jones, A., A general theory of elastically constrained ball and radial roller bearings under arbitrary load and speed conditions, ASME Trans., J. Basic Eng., 82, 309-320, 1960.
217. Tallian, T., Failure Atlas for Hertz Contact Machine Elements, 2nd Ed., ASME Press, 1999.
218. International Organization for Standards, International Standard ISO 281, Rolling Bearings-Dynamic Load Ratings and Rating Life, 2006.
219. Kotzalas, M. and Harris, T., Fatigue failure progression in ball bearings, ASME Trans., J. Tribol., 123(2), 283-242, April 2001.
220. Kotzalas, M. and Harris, T., Fatigue failure and ball bearing friction, Tribol. Trans., 43(1), 137-143, 2000.
221. Weibull, W., A statistical theory of the strength of materials, Proc. R. Swed. Inst. Eng. Res., 151, Stockholm, 1939.
222. Lundberg, G. and Palmgren, A., Dynamic capacity of rolling bearings, Acta Polytech. Mech. Eng., Ser. 1, 3(7), R. Swed. Acad. Eng., 1947.
223. Lundberg, G. and Palmgren, A., Dynamic capacity of roller bearings, Acta Polytech. Mech. Eng., Ser. 2, 4(96), R. Swed. Acad. Eng., 1952.
224. Ioannides, E. and Harris, T., A new fatigue life model for rolling bearings, ASME Trans., J. Tribol., 107, 367-378, 1985.
225. International Organization for Standards, International Standard ISO 281, Rolling Bearings-Dynamic Load Ratings and Rating Life, 2006.
226. Tallian, T., On competing failure modes in rolling contact, ASLE Trans., 10, 418-439, 1967.
227. Valori, R., Tallian, T., and Sibley, L., Elastohydrodynamic film effects on the load life behavior of rolling contacts, ASME Paper 65-LUBS-11, 1965.
228. Johnston, G., et al., Experience of element and full bearing testing over several years, Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, J. Hoo, Ed., 1982.
229. Sayles, R. and MacPherson, P., Influence of wear debris on rolling contact fatigue, ASTM STP 771, J. Hoo, Ed., 1982, pp. 255-274.
230. Fitch, E., An Encyclopedia of Fluid Contamination Control, Fluid Power Research Center, Oklahoma State University, 1980.
231. Tallian, T., Failure Atlas for Hertz Contact Machine Elements, 2nd Ed., ASME Press, 1999.
232. Andersson, T., Endurance testing in theory, Ball Bear. J., 217, 14-23, 1983.
233. Sebok, G. and Rimrott, U., Design of rolling element endurance testers, ASME Paper 69-DE-24, 1964.
234. Hacker, R., Trials and tribulations of fatigue testing of bearings, SAE Technical Paper 831372, 1983.
235. Johnson, L., Theory and Technique of Variation Research, Elsevier, New York, 1970.
236. Nelson, W., Theory and application of hazard plotting for censored failure data, Technometrics, 14, 945-966, 1972.
237. McCool, J., Inference on Weibull percentiles and shape parameter for maximum likelihood estimates, IEEE Trans. Reliab., R-19, 2-9, 1970.
238. McCool, J., Analysis of sudden death tests of bearing endurance, ASLE Trans., 17, 8-13, 1974.
239. McCool, J., Censored sample size selection for life tests, Proc. 1973 Ann. Reliab. Maintainab. Symp., IEEE Cat. No. 73CH0714-64, 1973.
240. McCool, J., Analysis of sets of two-parameter Weibull data arising in rolling contact endurance testing, Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, J.J. Hoo Ed., American Society for Testing and Materials, Philadelphia, 1982, pp. 293-319.
241. Harris, T., Prediction of ball fatigue life in a ball/v-ring test rig, ASME Trans., J. Tribol., 119, 365-374, July 1997.
242. Barwell, F. and Scott, D., Engineering, 182, 9-12, 1956.
243. Zaretsky, E., Parker, R., and Anderson, W., NASA five-ball tester-over 20 years of research, Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, J. Hoo, Ed., 1982.
244. Bamberger, E. and Clark, J., Development and application of the rolling contact fatigue test rig, Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, J. Hoo, Ed., 1982.
245. Glover, G., A ball-rod rolling contact fatigue tester, Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, J. Hoo, Ed., 1982.
246. Brown, P., et al., Evaluation of powder-processed metals for turbine engine ball bearings, Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, J. Hoo, Ed., 1982.
247. Harris, T., Establishment of a new rolling bearing fatigue life calculation model, Final Report U.S. Navy Contract N00421-97-C-1069, February 23, 2002.
248. Nélias, D., et al., Experimental and theoretical investigation of rolling contact fatigue of 52100 and M50 steels under EHL or Micro-EHL conditions, ASME Trans., J. Tribol, 120, 184-190, April 1998.
249. Ville, F. and Nélias, D., Early fatigue failure due to dents in EHL contacts, Presented at the STLE Annual Meeting, Detroit, May 17-21, 1998.
250. Wedeven, L., Optical Measurements in Elastohydrodynamic Rolling Contact Bearings, Ph.D. Thesis, University of London, 1971.
251. Wedeven Associates, Inc., Bridging Technology and Application through Testing, Brochure, 1997.