Thermal characterization of dental composites by TG/DTG and DSC

Journal of Thermal Analysis and Calorimetry

Volumn 102, Issue 1, 2010, Pages 361-367

  Miyazaki, Caroline Lumi ^a   Medeiros, Igor Studart ^a   Matos, Jivaldo Do Rosário ^a   Filho, Leonardo Eloy Rodrigues ^a  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

Composite resins; Dental materials; Glass transition temperature; Photoactivation; Polymerization; Post cure

Indexed keywords

CURING; DECOMPOSITION; DENTAL MATERIALS; GLASS; GLASS TRANSITION; HEAT TREATMENT; POLYMERIZATION; TEMPERATURE;

COMPOSITE RESINS; EXOTHERMIC EVENTS; HEAT OF REACTION; INITIAL MASS; PHOTO ACTIVATIONS; PHOTO-ACTIVATED; POST-CURE; THERMAL CHARACTERIZATION;

DENTAL COMPOSITES;

EID: 78649726425     PISSN: 13886150     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10973-010-0739-3     Document Type: Article

References (48)

1. Leinfelder KF. Posterior composite resins: the materials and their clinical performance. J. Am. Dent. Assoc. 1995; 126(5): 663-76.
2. Rueggeberg FA, Craig RG. Correlation of parameters used to estimate monomer conversion in a light cured composite. J. Dent. Res. 1988; 67(6): 932-7.
3. Ruyter IE. Types of resin-based inlay materials and their properties. Int. Dent. J. 1992; 42(3): 139-44.
4. Terry DA, Touati B. Clinical considerations for aesthetic laboratory/ fabricated inlay/onlay restorations: a review. Pract. Proced. Aesthet. Dent. 2001; 13(1): 51-8.
5. Cesar PF, Miranda WG Jr, Braga RR. Influence of shade and storage time on the flexural strength, flexural modulus, and hardness of composites used for indirect restorations. J. Prosthet. Dent. 2001; 86: 289-96.
6. Tanoue N, Matsumura H, Atsuta M. Comparative evaluation of secondary heat treatment and high intensity source for the improvement of properties of prosthetic composites. J. Oral Rehabil. 2000; 27: 288-93.
7. Wendt SLJ, Leinfelder KF. The clinical evaluation of heat-treated composite resin inlay. J. Am. Dent. Assoc. 1990; 120(2): 177-81.
8. Santana IL, Lodovici E, Mator JR, Medeiros IS, Miyazaki CL, Rodrigues Filho LE. Effect of experimental heat treatment on mechanical properties of resin composites. Braz. Dent. J. 2009; 20(3): 205-10.
9. Peutzfeldt A, Asmussen E. The effect of postcuring on quantity of remaining double bonds, mechanical properties, and in vitro wear of two resin composites. J. Dent. 2000; 28: 447-52.
10. Loza-Herrero MA, Rueggeberg FA, Caughman WF, Schuster GS, Lefebvre CA, Gardner FM. Effect of heating delay on conversion and strength of a post-cured resin composite. J. Dent. Res. 1998; 77(2): 426-31.
11. Peutzfeldt A, Asmussen E. Effect of temperature and duration of post-cure on selected mechanical properties of resin composites containing carboxylic anhydrides. Scand. J. Dent. Res. 1992; 100(5): 296-8.
12. Tezvergil A, Lassila LVJ, Vallettu PK. The effect of fiber orientation on the thermal expansion coefficients of fiber-reinforced composites. Dent. Mater. 2003; 19: 471-7.
13. Trujillo M, Newman SM, Stansburry JW. Use of near-IR to monitor the influence of external heating on dental composite photopolymerization. Dent. Mater. 2004; 20: 766-77.
14. Vaidynathan J, Vaidynathan TK, Wang Y, Viswanadhan T. Thermoanalytical characterization of visible light cure dental composites. J. Oral Rehabil. 1992; 19: 49-64.
15. Bausch JR, de Lange C, Davidson CL. The influence of temperature on some properties of composite resins. J. Oral Rehabil. 1981; 8(4): 309-17.
16. Ferracane JL,Condon JR. Post-cured heat treatments for composites: properties and fractography. Dent. Mater. 1992; 8(5): 290-5.
17. Mante F, Saleh N, Mante M. Softening patterns of post-cured heat-treated dental composites. Dent. Mater. 1993; 9(5): 325-31.
18. Miyazaki CL, Medeiros IS, Santana IL, Matos JR, Rodrigues Filho LE. Heat treatment of a direct composite resin: influence on flexural strength. Braz. Oral Res. 2009; 23(3): 241-7.
19. Sabbagh J, Ryelandt L, Bachérius L, Biebuyck J-J, Vreven J, Lambrechts P, et al. Characterization of the inorganic fraction of resin composites. J. Oral Rehabil. 2004; 31: 1090-101. (Pubitemid 39540391)
20. Canevarolo, Jr. S.V.: Técnicas de caracterização de pol?́meros, 1st edn, pp. 19-39, 209-259. Artliber, São Paulo (2004).
21. Imazato S, Mc Cabe JF, Tarumi H, Ehara A, Ebisu S. Degree of conversion of composites measured by DTA and FTIR. Dent. Mater. 2001; 17: 178-83.
22. Pianelli C, Devaux J, Bebelman S, Leloup G. The micro-Raman spectroscopy, a useful tool to determine the degree of conversion of a light-activated composite resin. J. Biomed. Mater. Res.: Appl. Biomater. 1999; 48: 675-81.
23. Yap AU, Soh MS, Siow KS. Effectiveness of composite cure with pulse activation and soft-start polymerization. Oper. Dent. 2002; 27(1): 44-9.
24. Davidson CL, de Gee AJ. Relaxation of polymerization contraction stress by flow in dental composites. J. Dent. Res. 1984; 63(2): 146-8.
25. Lim BS, Ferracane JL, Sakaguchi RL, Condon JR. Reduction of polymerization contraction stress for dental composites by twostep light activation. Dent. Mater. 2002; 18: 436-44.
26. Sideridou I, Tserki V, Papanastasiou G. Effect of chemical structure on degree of conversion in light-cured dimethacrylatebased dental resins. Biomaterials. 2002; 23: 1819-29. (Pubitemid 34218969)
27. Truffier-Boutry D, Demoustier-Champagne S, Devaux J, Biebuyck JJ, Mestdagh M, Larbanois P, et al. A physic-chemical explanation of the post-polymerization shrinkage in dental resins. Dent. Mater. 2006; 22(5): 405-12.
28. Asmussen E, Peutzfeldt A. Flexural strength and modulus of a step-cured resin composite. Acta Odontol. Scand. 2004; 62: 87-90.
29. Bayindir YZ, Yildiz M, Bayindir F. The effect of ''soft-start polymerization'' on surface hardness of two-packable composites. Dent. Mater. J. 2003; 22(4): 610-6.
30. Hofmann N, Markert T, Hugo B, Klaiber B. Effect of high intensity vs soft-start halogen irradiation on light-cured resinbased composites. Part I: temperature rise and polymerization shrinkage. Am. J. Dent. 2003; 16(6): 421-30.
31. Hofmann N, Markert T, Hugo B, Klaiber B. Effect of high intensity vs soft-start halogen irradiation on light-cured resinbased composites. Part II: hardness and solubility. Am. J. Dent. 2004; 17(1): 38-42.
32. Small BW. A review of devices used for photocuring resin-based composites. Gen. Dent. 2001; 49(5): 457-60.
33. Almeida CC, Mothé CG. Characterization of dental composites by thermal analysis, infrared spectroscopy and scanning electron microscopy. J. Therm. Anal. Cal. 2009; 97: 585-9.
34. Acharya A, Greener EH. Thermogravimetric analysis of composite restorative resins. J. Dent. Res. 1972; 51(5): 1363-8.
35. Kim KH, Ong JL, Okuno O. The effect of filler loading and morphology on the mechanical properties of contemporary composites. J. Prosthet. Dent. 2002; 87(6): 642-9.
36. Neves AD, Discacciati JAC, Oréfice RL, Jansen WC. Correlation between degree of conversion, microhardness and inorganic filler in composites. Braz. Oral. Res. 2002; 16(4): 349-54.
37. Lloyd CH, Brown EA. The heat of reaction and temperature rises associated with the setting of bonding resins. J. Oral Rehabil. 1984; 11: 319-24.
38. Jancar J, Wang W, Dibenedetto AT. On the heterogeneous structure of thermally cured Bis-GMA/TEG-DMA resins. J. Mater. Sci. Mater. Med. 2000; 11: 675-82.
39. Park SH. Comparison of degree of conversion for light-cured and additionally heat-cured composites. J. Prosthet. Dent. 1996; 76: 613-8.
40. Yoon TH, Lee YK, Lim BS, Kim CW. Degree of polymerization of resin composites by different light sources. J. Oral Rehabil. 2002; 29: 1165-73.
41. Floyd CJE, Dickens SH. Network structure of Bis-GMA and UDMA-based resins systems. Dent. Mater. 2006; 22: 1143-9.
42. Tanoue N, Koishi Y, Matsumura H, Atsuta M. Curing depth of different shades of a photo-activated prosthetic composite material. J. Oral Rehabil. 2001; 28: 618-23.
43. Peutzfeldt A, Asmussen E. Mechanical properties of heat treated restorative resins for use in the inlay-onlay technique. Scand J Dent Res. 1990; 98: 564-7.
44. Phillips RW. Skinner's science of dental materials. 9th ed. Philadelphia: Saunders; 1991.
45. Viljanen EK, Skrifvars M, Vallitu PK. Dendritic copolymers and particulate filler for dental applications: degree of conversion and thermal properties. Dent. Mater. 2007; 23(11): 1420-7.
46. Broer DJ, Mol GN. Temperature effects on the kinetics of photoinitiated polymerization of dimethacrylates. Polymer. 1991; 32(4): 690-5.
47. Sideridou I, Achilias DS, Kyrikou E. Thermal expansion characteristics of light-cured dental resins and resin-composites. Biomaterials. 2004; 25(15): 3087-97.
48. Rojas SS, Frigo GJM, Bernardi MIB, Rastelli ANS, Hernandes AC, Bagnato VS. Thermal and structural properties of commercial dental resins light-cured with blue emitting diodes (LEDs). J. Therm. Anal. Cal. 2010; 99: 263-8.