Metallic biomaterials of knee and hip - A review

Trends in Biomaterials and Artificial Organs

Volumn 24, Issue 2, 2010, Pages 69-82

  Nasab, Marjan Bahrami ^a   Hassan, Mohd Roshdi ^a   Sahari, Barkawi Bin ^a  

^a UNIVERSITY PUTRA MALAYSIA   (Malaysia)

Author keywords

[No Author keywords available]

Indexed keywords

DAMPING PROPERTY; FATIGUE LIFE; HIGH POTENTIAL; HIP IMPLANTS; METALLIC BIOMATERIALS; NITI SHAPE MEMORY ALLOYS; ORTHOPEDIC APPLICATIONS; ORTHOPEDIC IMPLANT; POROUS NI-TI; SHAPE MEMORY ALLOY; SUPERELASTIC; TI ALLOYS;

ALLOYS; BIOCOMPATIBILITY; BIOLOGICAL MATERIALS; COBALT; CORROSION FATIGUE; CORROSION RESISTANCE; SHAPE MEMORY EFFECT; STAINLESS STEEL;

TITANIUM ALLOYS;

EID: 78449235890     PISSN: 09711198     EISSN: 09711198     Source Type: Journal    
DOI: None     Document Type: Review

References (75)

1. Sculco, T.P., The economic impact of infected joint arthroplasty. Orthopedics, 1995. 18(9): p. 871.
2. Rakhorst, G. and R.J. Ploeg, Biomaterials In Modern Medicine: The Groningen Perspective. 2008: World Scientific Publishing Company.
3. Kurtz, S., et al., Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030. Journal of Bone and Joint (Pubitemid 46564282)
4. Rimnac, C.M., Wright. T. M, Bartel, DL; Klein, RW. Petko. A. A, Failure of orthopedic implants: three case histories. Materials Characterization, 1991. 26(4): p. 201-9.
5. Teoh, S.H., Fatigue of biomaterials: A review. International Journal of Fatigue, 2000. 22(10): p. 825-837. (Pubitemid 32030231)
6. Niinomi, M., Fatigue characteristics of metallic biomaterials. International Journal of Fatigue, 2007. 29(6): p. 992-1000. (Pubitemid 46435706)
7. Alvarado, J., et al., BIOMECHANICS OF HIP AND KNEE PROSTHESES. 2003.
8. Geetha, M., et al., Ti based biomaterials, the ultimate choice for orthopaedic implants-A review. Progress in Materials Science, 2008.
9. Long, M. and H.J. Rack, Titanium alloys in total joint replacement - a materials science perspective. Biomaterials, 1998. 19(18): p. 1621-1639. (Pubitemid 28512843)
10. Wang, K., The use of titanium for medical applications in the USA. Materials science & engineering. A, Structural materials: properties, microstructure and processing, 1996. 213(1-2): p. 134-137. (Pubitemid 126394529)
11. Katz, J.L., Anisotropy of Young's modulus of bone. Nature, 1980. 283(5742): p. 106-107. (Pubitemid 10170898)
12. Au, A.G., et al., Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements. Journal of Biomechanics, 2007. 40(6): p. 1410-1416. (Pubitemid 46483452)
13. Singh, R. and N.B. Dahotre, Corrosion degradation and prevention by surface modification of biometallic materials. Journal of Materials Science: Materials in Medicine, 2007. 18(5): p. 725-751. (Pubitemid 46766556)
14. Okazaki, Y. and E. Gotoh, Comparison of metal release from various metallic biomaterials in vitro. Biomaterials, 2005. 26(1): p. 11-21. (Pubitemid 38759469)
15. Ramsden, J.J., et al., The Design and Manufacture of Biomedical Surfaces. CIRP Annals-Manufacturing Technology, 2007. 56(2): p. 687-711. (Pubitemid 350122464)
16. Navarro, M., et al., Biomaterials in orthopaedics. Journal of The Royal Society Interface, 2008. 5(27): p. 1137-1158.
17. Smallman, R. and R. Bishop, Modern physical metallurgy and materials engineering. 1999: Butterworth-Heinemann.
18. Williams, D.F., On the mechanisms of biocompatibility. Biomaterials, 2008. 29(20): p. 2941-2953.
19. Viceconti, M., et al., Large-sliding contact elements accurately predict levels of bone-implant micromotion relevant to osseointegration. Journal of Biomechanics, 2000. 33(12): p. 1611-1618.
20. Mirhosseini, N., et al., Laser surface micro-texturing of Ti-6Al-4V substrates for improved cell integration. Applied Surface Science, 2007. 253(19): p. 7738-7743. (Pubitemid 47058728)
21. Fini, M., et al., Osteoporosis and biomaterial osteointegration. Biomedicine & Pharmacotherapy, 2004. 58(9): p. 487-493. (Pubitemid 39423595)
22. Carr, B.C. and T. Goswami, Knee implants-Review of models and biomechanics. Materials and Design, 2009. 30(2): p. 398-413.
23. Halloran, J.P., Explicit finite element modeling of total knee replacement mechanics, in Facalty of engineerin and computer science. 2007, Denver University. p. 189.
24. Gradzka-Dahlke, M., J.R. Dabrowski, and B. Dabrowski, Modification of mechanical properties of sintered implant materials on the base of Co-Cr-Mo alloy. Journal of Materials Processing Tech., 2007.
25. Vidal, C.V. and A.I. Muñoz, Effect of thermal treatment and applied potential on the electrochemical behaviour of CoCrMo biomedical alloy. Electrochimica Acta, 2008.
26. Oztürk, O., U. Türkan, and A.E. Eroglu, Metal ion release from nitrogen ion implanted CoCrMo orthopedic implant material. Surface & Coatings Technology, 2006. 200(20-21): p. 5687-5697.
27. Nag, S., et al., Characterization of novel borides in Ti-Nb-Zr-Ta+ 2B metal-matrix composites. Materials characterization, 2009. 60(2): p. 106-113.
28. Eisenbarth, E., et al., Biocompatibility of â-stabilizing elements of titanium alloys. Biomaterials, 2004. 25(26): p. 5705-5713. (Pubitemid 38624450)
29. Shenhar, A., et al., Surface modification of titanium alloy orthopaedic implants via novel powder immersion reaction assisted coating nitriding method. Materials science & engineering. A, Structural materials: properties, microstructure and processing, 1999. 268(1-2): p. 40-46.
30. Budzynski, P., A.A. Youssef, and J. Sielanko, Surface modification of Ti-6Al-4V alloy by nitrogen ion implantation. Wear, 2006. 261(11-12): p. 1271-1276. (Pubitemid 44767933)
31. Lee, B.H., et al., Effect of surface structure on biomechanical properties and osseointegration. Materials Science & Engineering C, 2008. 28(8): p. 1448-1461.
32. Miller, P.D. and J.W. Holladay, Friction and wear properties of titanium. Wear, 1958. 2(2): p. 133-140.
33. Rostoker, W. and J.O. Galante, The influence of titanium surface treatments on the wear of medical grade polyethylene. Biomaterials, 1981. 2(4): p. 221.
34. Semlitsch, M.F., et al., Joint replacement components made of hot-forged and surface-treated Ti-6 Al-7 Nb alloy. Biomaterials, 1992. 13(11): p. 781-788.
35. Qazi, J.I., H.J. Rack, and B. Marquardt, High-strength metastable beta-titanium alloys for biomedical applications. JOM Journal of the Minerals, Metals and Materials Society, 2004. 56(11): p. 49-51. (Pubitemid 40509842)
36. Niinomi, M., T. Hanawa, and T. Narushima, Japanese research and development on metallic biomedical, dental, and healthcare materials. JOM Journal of the Minerals, Metals and Materials Society, 2005. 57(4): p. 18-24. (Pubitemid 40760834)
37. Mantovani, D., Shape memory alloys: Properties and biomedical applications. JOM Journal of the Minerals, Metals and Materials Society, 2000. 52(10): p. 36-44. (Pubitemid 32067189)
38. Otsuka, K. and C.M. Wayman, Shape memory materials. 1999: Cambridge University Press New York.
39. Kapanen, A., et al., Effect of nickel-titanium shape memory metal alloy on bone formation. Biomaterials, 2001. 22(18): p. 2475-2480. (Pubitemid 32706448)
40. Machado, L.G. and M.A. Savi, Medical applications of shape memory alloys. Brazilian Journal of Medical and Biological Research, 2003. 36: p. 683-691. (Pubitemid 36880739)
41. Hallab, N.J., et al., Lymphocyte responses in patients with total hip arthroplasty. Journal of Orthopaedic Research, 2005. 23(2).
42. Castleman, L.S., et al., Biocompatibility of nitinol alloy as an implant material. J Biomed Mater Res, 1976. 10(5): p. 695-731.
43. Shabalovskaya, S.A., On the nature of the biocompatibility and on medical applications of NiTi shape memory and superelastic alloys. Bio-Medical Materials and Engineering, 1996. 6(4): p. 267-289. (Pubitemid 126443034)
44. Berger-Gorbet, M., et al., Biocompatibility testing of NiTi screws using immunohistochemistry on sections containing. Journal of Biomedical Materials Research, 1996. 32: p. 243-248. (Pubitemid 26320240)
45. Ryhaenen, J., et al., In vivo biocompatibility evaluation of nickel-titanium shape memory metal alloy: Muscle and perineural tissue responses and encapsule membrane thickness. Journal of Biomedical Materials Research, 1998. 41(3): p. 481-488.
46. Ryhanen, J., Biocompatibility of Nitinol. Minimally Invasive Therapy and Allied Technologies, 2000. 9(2): p. 99-105. (Pubitemid 30330515)
47. Balakrishnan, N., et al., Biocompatibility of nitinol and stainless steel in the bladder: An experimental study. Journal of Urology, 2005. 173(2): p. 647-650.
48. Es-Souni, M. and H. Fischer-Brandies, Assessing the biocompatibility of NiTi shape memory alloys used for medical applications. Analytical and bioanalytical chemistry, 2005. 381(3): p. 557-567. (Pubitemid 40379328)
49. Firstov, G.S., et al., Surface oxidation of NiTi shape memory alloy. Biomaterials, 2002. 23(24): p. 4863-4871. (Pubitemid 35286709)
50. Chen, M.F., et al., Bioactive NiTi shape memory alloy used as bone bonding implants. Materials Science and Engineering: C, 2004. 24(4): p. 497-502. (Pubitemid 38616263)
51. Chan, Y.L., et al., Mechanical properties, bioactivity and corrosion resistance of oxygen and sodium plasma treated nickel titanium shape memory alloy. Surface & Coatings Technology, 2007. 202(4-7): p. 1308-1312. (Pubitemid 350082296)
52. Chu, P.K., Enhancement of surface properties of biomaterials using plasma-based technologies. Surface & Coatings Technology, 2007. 201(19-20): p. 8076-8082. (Pubitemid 47074228)
53. Michiardi, A., et al., Electrochemical behaviour of oxidized NiTi shape memory alloys for biomedical applications. Surface & Coatings Technology, 2007. 201(14): p. 6484-6488.
54. Ng, K.W., H.C. Man, and T.M. Yue, Corrosion and wear properties of laser surface modified NiTi with Mo and ZrO2. Applied Surface Science, 2008. 1(21): p. 6725-6730.
55. Shabalovskaya, S., J. Anderegg, and J. Van Humbeeck, Critical overview of Nitinol surfaces and their modifications for medical applications. Acta Biomaterialia, 2008. 4(3): p. 447-467.
56. Chu, C.L., et al., Microstructure, nickel suppression and mechanical characteristics of electropolished and photoelectrocatalytically oxidized biomedical nickel titanium shape memory alloy. Acta Biomaterialia, 2009.
57. Barrabes, M., et al., Mechanical properties of nickel-titanium foams for reconstructive orthopaedics. Materials Science and Engineering C, 2008. 28(1): p. 23-27. (Pubitemid 350297882)
58. Li, Y.-h., L.-j. Rong, and Y.-y. Li, Pore characteristics of porous NiTi alloy fabricated by combustion synthesis. Journal of Alloys and Compounds, 2001. 325(1-2): p. 259-262. (Pubitemid 32599686)
59. Ho, J.P.Y., et al., Oxygen plasma treatment to restrain nickel out-diffusion from porous nickel titanium orthopedic materials. Surface & Coatings Technology, 2007. 201(9-11): p. 4893-4896. (Pubitemid 46158529)
60. Li, Y.H., et al., The influence of porosity on corrosion characteristics of porous NiTi alloy in simulated body fluid. Materials Letters, 2002. 57(2): p. 448-451.
61. Zhu, S.L., et al., Effect of porous NiTi alloy on bone formation: A comparative investigation with bulk NiTi alloy for 15 weeks in vivo. Materials Science & Engineering C, 2008. 28(8): p. 1271-1275.
62. Itin, V.I., et al., Mechanical properties and shape memory of porous nitinol. Materials characterization, 1994. 32(3): p. 179-187.
63. Zhang, X.P., et al., Superelasticity decay of porous NiTi shape memory alloys under cyclic strain-controlled fatigue conditions. Materials Science & Engineering A, 2008. 481: p. 170-173. (Pubitemid 351494404)
64. Bansiddhi, A., et al., Porous NiTi for bone implants: A review. Acta Biomaterialia, 2008. 4: p. 773-782.
65. Li, Y.H., et al., Effect of pores on corrosion characteristics of porous NiTi alloy in simulated body fluid. Materials Science & Engineering A, 2003. 363(1-2): p. 356-359.
66. Entchev, P.B. and D.C. Lagoudas, Modeling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys. Part II: porous SMA response. Mechanics of Materials, 2004. 36(9): p. 893-913.
67. Lagoudas, D.C., et al., Micromechanics of porous shape memory alloys. Adaptive structures and material systems-2000, 2000: p. 41-50.
68. Thierry, B., et al., Nitinol versus stainless steel stents: acute thrombogenicity study in an ex vivo porcine model. Biomaterials, 2002. 23(14): p. 2997-3005. (Pubitemid 34498321)
69. Peltonen, L., Nickel sensitivity in the general population. Contact Dermatitis, 1979. 5(1): p. 27-32. (Pubitemid 9089149)
70. Jiang, H.C. and L.J. Rong, Effect of hydroxyapatite coating on nickel release of the porous NiTi shape memory alloy fabricated by SHS method. Surface & Coatings Technology, 2006. 201(3-4): p. 1017-1021. (Pubitemid 44340805)
71. Wu, S., et al., Nickel release behavior, cytocompatibility, and superelasticity of oxidized porous single-phase NiTi. Journal of Biomedical Materials Research Part A, 2007(4).
72. Stoeckel, D. and W. Yu, Superelastic Nickel-Titanium Wire. Technical Bulletin, Raychem Corporation, Menlo Park, CA, 1990.
73. Rivin, E.I., Precision Compensators Using Giant Superelasticity Effect. CIRP Annals-Manufacturing Technology, 2007. 56(1): p. 391-394. (Pubitemid 46898324)
74. Duerig, T., et al., Engineering aspects of shape memory alloys. Butterworth-Heinemann, Reed Books Services Ltd, P. O. Box 5, Rushden, Northants, NN 10 9 YX, UK, 1990. 499, 1990.
75. Schmidt, I. and R. Lammering, The damping behaviour of superelastic NiTi components. Materials Science & Engineering A, 2004. 378(1-2): p. 70-75. (Pubitemid 38865649)