Effect of highly filled ferrites on non-isothermal crystallization behavior of polyamide 6 bonded ferrites

European Polymer Journal

Volumn 46, Issue 11, 2010, Pages 2206-2215

  Jiang, Caiyun ^a   Wang, Dapeng ^a   Zhang, Maojie ^a   Li, Peijun ^a   Zhao, Shugao ^a  

^a QINGDAO UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

Highly filled systems; Non isothermal crystallization; Polyamide 6; Polymer bonded magnets

Indexed keywords

CHAIN SEGMENTS; COMPETITIVE EFFECTS; CRYSTALLINITIES; CRYSTALLIZATION ACTIVATION ENERGY; CRYSTALLIZATION RATES; FERRITE PARTICLE; HETEROGENEOUS NUCLEATION; HIGHLY FILLED SYSTEMS; HYDROPHILIC FILLERS; HYDROPHOBIC POLYMERS; INTERFACIAL AREAS; MELT EXTRUSION; NONISOTHERMAL CRYSTALLIZATION; POLYAMIDE 6; POLYMER BONDED MAGNETS; STRONG INTERACTION; SURFACE NATURE;

ACTIVATION ENERGY; CRYSTALLIZATION; DIFFERENTIAL SCANNING CALORIMETRY; FERRITE; FERRITES; MELT SPINNING; NUCLEATION; PERMANENT MAGNETS; SURFACE PROPERTIES;

FILLED POLYMERS;

EID: 78149282846     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2010.05.002     Document Type: Article

References (63)

1. J. Otaigbe, H. Kim, and J. Xiao Effect of coupling agent and filler particle size on melt rheology of polymer-bonded Nd-Fe-B magnets Polym Compos 20 5 1999 697 704
2. J. Xiao, and J. Otaigbe Polymer-bonded magnets. III. Effect of surface modification and particle size on the improved oxidation and corrosion resistance of magnetic rare earth fillers J Alloy Compd 309 1-2 2000 100 106
3. X.H. Zhang, and W.H. Xiong Effect of bonding process on the properties of isotropic epoxy resin-bonded Nd-Fe-B magnets Rare Met 28 3 2009 248 252
4. S.X. Bai, H. Zhang, and L. Lv Progress of research on bonded Nd-Fe-B magnets J Iron Steel Res Int 13 2006 489 493
5. J.J. Romero, R. Cuadrado, and E. Pina Anisotropic polymer bonded hard-magnetic films for microelectromechanical system applications J Appl Phys 99 8 2006 303
6. V.E. Yudin, J.U. Otaigbe, T.X. Bui, and V.M. Svetlichnyi Structure and properties of polyimide-bonded magnets processed from prepolymers based on diacetyl derivatives of aromatic diamines and dianhydrides J Appl Polym Sci 100 1 2006 478 485
7. J. Hemrick, E. Lara-Curzio, and K. Liu Mechanical properties of thermally cycled nylon bonded Nd-Fe-B permanent magnets J Mater Sci 39 21 2004 6509 6522
8. M.H. Makled, T. Matsui, H. Tsuda, H. Mabuchi, M.K. El-Mansy, and K. Morii Magnetic and dynamic mechanical properties of barium ferrite-natural rubber composites J Mater Process Technol 160 2 2005 229 233
9. M. Rada, S. Kardelky, and I. Mazilu Corrosion behavior of polymer-bonded NdFeB-based nanocrystalline magnets IEEE Trans Magn 40 4 2004 2864 2866
10. V.E. Yudin, J.U. Otaigbe, T.X. Bui, and V.M. Svetlichnyi Polyimide bonded magnets: processing and properties J Appl Polym Sci 88 14 2003 3151 3158
11. P.C. Guschl, H.S. Kim, and J.U. Otaigbe Effects of a Nd-Fe-B magnetic filler on the crystallization of poly(phenylene sulfide) J Appl Polym Sci 83 5 2002 1091 1102
12. J. Matutes-Aquino, D. Rios-Jara, O. Ayala-Valenzuela, P.S. Gallardo, L.F.R. De Valle, and O.S.R. Fernandez Composition dependence of the magnetic properties of banded magnets of strontium hexaferrite-polyvinyl chloride Polym Compos 21 5 2000 734 738
13. J. Xiao, J.U. Otaigbe, and D.C. Jiles Modeling of magnetic properties of polymer bonded Nd-Fe-B magnets with surface modifications J Magn Magn Mater 218 1 2000 60 66
14. J. Xiao, and J.U. Otaigbe Polymer bonded magnets. II. Effect of liquid crystal polymer and surface modification on magneto-mechanical properties Polym Compos 21 2 2000 332 342
15. X. Jun, and J.U. Otaigbe Polymer-bonded magnets. I. Analytic thermogravimetry to determine the effect of surface modification on dispersion of Nd-Fe-B fillers J Mater Res 14 7 1999 2893 2896
16. J.U. Otaigbe, H.S. Kim, and J. Xiao Effect of coupling agent and filler particle size on melt rheology of polymer-bonded Nd-Fe-B magnets Polym Compos 20 5 1999 697 704
17. J.U. Otaigbe, J. Xiao, H. Kim, and S. Constantinides Influence of filler surface treatments on processability and properties of polymer-bonded Nd-Fe-B magnets J Mater Sci Lett 18 4 1999 329 332
18. J. Xiao, and J.U. Otaigbe Polymer-bonded magnets. Part I: Analytic thermogravimetry to determine the effect of surface modification on dispersion of Nd-Fe-B fillers J Mater Res 14 7 1999 2893 2896
19. A.Z. Liu, I.Z. Rahman, M.A. Rahman, and E.R. Petty Fabrication and measurements on polymer bonded NdFeB magnets J Mater Process Technol 56 1-4 1996 571 580
20. H. Wu, R. Zheng, and Z. Xie Enhancing mechanical properties and magnetic performance of plastics magnet via mixing under vibration force field J Mater Process Technol 209 2 2009 1048 1052
21. J. Kim, H. Park, and S. Kim Unique nucleation of multi-walled carbon nanotube and poly(ethylene 2,6-naphthalate) nanocomposites during non-isothermal crystallization Polymer 47 4 2006 1379 1389
22. R. Khalil, A. Chryss, M. Jollands, and S. Bhattacharya Effect of coupling agents on the crystallinity and viscoelastic properties of composites of rice hull ash-filled polypropylene J Mater Sci 42 24 2007 10219 10227
23. Y. Xie, D. Yu, J. Kong, X. Fan, and W. Qiao Study on morphology, crystallization behaviors of highly filled maleated polyethylene-layered silicate nanocomposites J Appl Polym Sci 100 5 2006 4004 4401
24. A. Zerda, T. Caskey, and A. Lesser Highly concentrated, intercalated silicate nanocomposites: synthesis and characterization Macromolecules 36 5 2003 1603 1608
25. Z. Ren, R. Shanks, and T. Rook Crystallization and melting of highly filled polypropylene composites prepared with surface-treated fillers J Appl Polym Sci 79 11 2001 1942 1948
26. C. Broekaert, S. Peeterbroeck, and S. Benali Chlorinated polyethylene/layered silicate nanocomposites: poly(epsilon-caprolactone)-based "masterbatch" approach Eur Poly J 43 10 2007 4160 4168
27. F. Ramirez, and L. Carlsson Modified single fiber fragmentation test procedure to study water degradation of the fiber/matrix interface toughness of glass/vinylester J Mater Sci 44 12 2009 3035 3042
28. H. Hsiang, and J. Tsai Titanate coupling agent effects on nonaqueous Co 2 Z ferrite suspensions dispersion J Mater Sci 41 19 2006 6339 6346
29. J.S. Shelley, P.T. Mather, and K.L. DeVries Reinforcement and environmental degradation of nylon-6/clay nanocomposites Polymer 42 13 2001 5849 5858
30. J. Shi, Y. Wang, Y. Gao, and H.W. Bai Effects of coupling agents on the impact fracture behaviors of T-ZnOw/PA6 composites Compos Sci Technol 68 6 2008 1338 1347
31. D. Garcia, and H.W. Starkweather Hydrogen-bonding in nylon-66 and model compounds J Polym Sci B Polym Phys 23 3 1985 537 555
32. T. Wan, M.J. Clifford, F. Gao, A.S. Bailey, D.H. Gregory, and R. Somsunan Strain amplitude response and the microstructure of PA/clay nanocomposites Polymer 46 17 2005 6429 6436
33. D.J. Skrovanek, P.C. Painter, and M.M. Coleman Hydrogen-bonding in polymers. 2. Infrared temperature studies of nylon-11 Macromolecules 19 3 1986 699 705
34. M.F. Roberts, and S.A. Jenekhe Site-specific reversible scission of hydrogen-bonds in polymers - an investigation of polyamides and their lewis acid-base complexes by infrared-spectroscopy Macromolecules 24 11 1991 3142 3146
35. Y. Ma, G. Hu, X. Ren, and B. Wang Non-isothermal crystallization kinetics and melting behaviors of nylon 11/tetrapod-shaped ZnO whisker (T-ZnOw) composites Mater Sci Eng A 460 2007 611 618
36. M. Kuo, J. Huang, and M. Chen Non-isothermal crystallization kinetic behavior of alumina nanoparticle filled poly(ether ether ketone) Mater Chem Phys 99 2-3 2006 258 268
37. J. Li, Z. Fang, L. Tong, A. Gu, and F. Liu Effect of multi-walled carbon nanotubes on non-isothermal crystallization kinetics of polyamide 6 Eur Poly J 42 12 2006 3230 3235
38. C. Wei, D. Srivastava, and K. Cho Thermal expansion and diffusion coefficients of carbon nanotube-polymer composites Nano Lett 2 6 2002 647 650
39. S. Cheng, and B. Wunderlich Glass transition and melting behavior of poly(ethylene 2,6-naphthalenedicarboxylate) Macromolecules 21 3 1988 789 797
40. S. Kim, S. Ahn, and T. Hirai Crystallization kinetics and nucleation activity of silica nanoparticle-filled poly(ethylene 2,6-naphthalate) Polymer 44 19 2003 5625 5634
41. L. Li, C. Li, C. Ni, L. Rong, and B. Hsiao Structure and crystallization behavior of Nylon 66/multi-walled carbon nanotube nanocomposites at low carbon nanotube contents Polymer 48 12 2007 3452 3460
42. C. Zhao, P. Zhang, S. Lu, J. He, and X. Wang Study on the non-isothermal crystallization behaviors of PA6/silica nanocomposites prepared by the sol-gel process J Mater Sci 42 21 2007 9083 9091
43. C. Wang, C. Huang, Y. Chen, G. Hwang, and S. Tsai Carbon nanocapsules-reinforced syndiotactic polystyrene nanocomposites: crystallization and morphological features Polymer 49 25 2008 5564 5574
44. 2 nanoparticles Polymer 43 14 2002 3951 3957
45. G. Hinrichsen, and F. Lux Crystallization kinetics of highly filled glass fibre/polyamide 6 composites Polym Bull 24 1 1990 79 86
46. D.W. Chae, K.H. Lee, and Y.C. Kim Rheological properties of ferrite nanocomposites based on nylon-66 J Polym Sci B Polym Phys 44 2 2006 371 377
47. K. Illers Polymorphie, kristallinit t und schmelzw rme von poly(-caprolactam), 2. Teil 1: cf. 3. Kalorimetrische untersuchungen Die Makromol Chem 179 2 1978 497 507
48. M. Run, Y. Wang, C. Yao, and J. Gao Non-isothermal crystallization kinetics of poly(trimethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends Thermochim Acta 447 1 2006 13 21
49. W. Weng, G. Chen, and D. Wu Crystallization kinetics and melting behaviors of nylon 6/foliated graphite nanocomposites Polymer 44 26 2003 8119 8132
50. M. Avrami Kinetics of phase change. I. General theory J Chem Phys 7 1939 1103
51. A. Jeziorny Parameters characterizing the kinetics of the non-isothermal crystallization of poly(ethylene terephthalate) determined by DSC Polymer 19 10 1978 1142 1144
52. L.Y. Li, C.Y. Li, C.Y. Ni, L.X. Rong, and B. Hsiao Structure and crystallization behavior of Nylon 66/multi-walled carbon nanotube nanocomposites at low carbon nanotube contents Polymer 48 12 2007 3452 3460
53. T. Fornes, and D. Paul Crystallization behavior of nylon 6 nanocomposites Polymer 44 14 2003 3945 3961
54. V. Privalko, T. Kawai, and Y. Lipalov Crystallization of filled nylon 6. III. Non-isothermal crystallization Colloid Polym Sci 257 10 1979 1042 1048
55. K. Chuah, S. Gan, and K. Chee Determination of Avrami exponent by differential scanning calorimetry for non-isothermal crystallization of polymers Polymer (Guildford) 40 1 1999 253 259
56. W.G. Weng, G.H. Chen, and D.J. Wu Crystallization kinetics and melting behaviors of nylon 6/foliated graphite nanocomposites Polymer 44 26 2003 8119 8132
57. N. Monteiro-Riviere, R. Nemanich, A. Inman, Y. Wang, and J. Riviere Multi-walled carbon nanotube interactions with human epidermal keratinocytes Toxicol Lett 155 3 2005 377 384
58. Y.P. Khanna, A.C. Reimschuessel, A. Banerjie, and C. Altman Memory effects in polymers. 2. Processing history vs crystallization rate of nylon-6 observation of phenomenon and product behavior Polym Eng Sci 28 24 1988 1600 1606
59. T. Ozawa Kinetics of non-isothermal crystallization Polymer 12 3 1971 150 158
60. T. Liu, Z. Mo, S. Wang, and H. Zhang Nonisothermal melt and cold crystallization kinetics of poly(aryl ether ether ketone ketone) Polym Eng Sci 37 3 1997 568 575
61. M. Liu, Q. Zhao, Y. Wang, C. Zhang, Z. Mo, and S. Cao Melting behaviors, isothermal and non-isothermal crystallization kinetics of nylon 1212 Polymer 44 8 2003 2537 2545
62. H. Kissinger Variation of peak temperature with heating rate in differential thermal analysis J Res Natl Bureau Stand 57 4 1956 217 221
63. R. Hauser, J. King, R. Pagel, and J. Keith Effects of carbon fillers on the thermal conductivity of highly filled liquid-crystal polymer based resins J Appl Polym Sci 109 4 2008 2145 2155