The effect of HVOF particle-substrate interactions on local variations in the coating microstructure and the corrosion resistance

Journal of Thermal Spray Technology

Volumn 19, Issue 5, 2010, Pages 841-851

  Racek, Ondrej ^a  

^a CATERPILLAR INC   (United States)

Author keywords

cermet coatings; corrosion; HVOF microstructures; HVOF spray parameters

Indexed keywords

CERMET COATINGS; COATING MICROSTRUCTURES; COATING POROSITY; CORROSION PROPERTY; HIGH VELOCITY OXYGEN FUELS; HVOF MICROSTRUCTURES; HVOF SPRAY; IN-FLIGHT PARTICLES; LOCAL VARIATIONS; PARTICLE BEHAVIOR; PARTICLE VELOCITIES; PARTICLE-SUBSTRATE INTERACTIONS; REDEPOSITION; SPLASHING PHENOMENON; SUBSTRATE CURVATURE; SUBSTRATE TEMPERATURE; THERMAL SPRAY PROCESSING;

CERAMIC COATINGS; CERMETS; CORROSION RESISTANCE; MICROSTRUCTURE; OXYGEN; POROSITY; SPRAYED COATINGS; STAINLESS STEEL; SUBSTRATES; TEMPERATURE MEASUREMENT; VELOCITY CONTROL;

HVOF THERMAL SPRAYING;

EID: 78049485273     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-010-9483-2     Document Type: Article

References (39)

1. MP Planche H Liao B Normand C Coddet 2005 Relationships Between NiCrBSi Particle Characteristics and Corresponding Coating Properties Using Different Thermal Spraying Processes Surf. Coat. Technol. 200 7 2465 2473 1:CAS:528:DC%2BD2MXht1Ggt7%2FI 10.1016/j.surfcoat.2004.08.224
2. D.S. Parker, Case Study: Application of HVOF Sprayed Coatings for Replacement of Chrome Plating on Navy P-3 Aircraft Hydraulic Components and Landing Gear, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., May 25-29, 1998 (Nice, France), ASM International, 1998, p 243-248
3. C. Wasserman, R. Boecking, and S. Gustafsson, Replacement for Hard Chrome Plating in Printing Machinery, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, Ed., 2001 (Singapore), ASM International, 2001, p 69-74
4. BZ Janos E Lugscheider P Remer 1999 Effect of Thermal Aging on the Erosion Resistance of Air Plasma Sprayed Zirconia Thermal Barrier Coating Surf. Coat. Technol. 113 3 278 285 1:CAS:528:DyaK1MXitVKntLw%3D 10.1016/S0257-8972(99) 00002-X
5. B. Arsenault, J.G. Legoux, H. Hawthorne, J.P. Immarigeon, P. Gougeon, and C. Moreau, HVOF Process Optimization for the Erosion Resistance of WC-12Co and WC-10Co-4Cr Coatings, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Ed., May 28-30, 2001 (Singapore), ASM International, 2001, p 1051-1060
6. F Kroupa J Dubsky 1999 Pressure Dependence of Young's Moduli of Thermal Sprayed Materials Scripta Mater. 40 11 1249 1254 1:CAS:528:DyaK1MXktFCgt7k%3D 10.1016/S1359-6462(99)00120-7
7. TP Hoepfner ED Case 2003 The Influence of the Microstructure on the Hardness of Sintered Hydroxyapatite Ceram. Int. 29 6 699 706 1:CAS:528:DC%2BD3sXltFCksLw%3D 10.1016/S0272-8842(02)00220-1
8. H.A. Jehn and A. Zielonka, Corrosion Testing, ASM Handbook, Volume 5 Surface Engineering, S.R. Lampman, Ed., ASM International, Materials Park, OH, 1994, p 635-641
9. J Kawakita S Kuroda T Fukushima T Kodama 2003 Development of Dense Corrosion Resistant Coatings by an Improved HVOF Spraying Process Sci. Technol. Adv. Mater. 4 4 281 289 1:CAS:528:DC%2BD3sXovF2lsLo%3D 10.1016/j.stam.2003.08. 001
10. TC Totemeier 2005 Effect of High-Velocity Oxygen-Fuel Thermal Spraying on the Physical and Mechanical Properties of Type 316 Stainless Steel J. Therm. Spray. Technol. 14 3 369 372 1:CAS:528:DC%2BD2MXhtVyhtrzI 10.1361/ 105996305X59440 2005JTST...14..369T
11. D.T. Gawne, B.J. Griffiths, and G. Dong, Splat Morphology and Adhesion of Thermally Sprayed Coatings, Thermal Spraying: Current Status and Future Trends, A. Ohmori, Ed., May 22-26, 1995 (Kobe, Japan), High Temperature Society of Japan, 1995, p 779-784
12. AP Newbery PS Grant 2000 Droplet Splashing During Arc Spraying of Steel and the Effect on Deposit Microstructure J. Therm. Spray Technol. 9 2 250 258 1:CAS:528:DC%2BD3cXls1Ojtro%3D 10.1361/105996300770350005 2000JTST....9..250N
13. RW Trice KT Faber 2000 Role of Lamellae Morphology on the Microstructural Development and Mechanical Properties of Small-Particle Plasma-Sprayed Alumina J. Am. Ceram. Soc. 83 4 889 896 1:CAS:528:DC%2BD3cXis1Wku74%3D 10.1111/j.1151-2916.2000.tb01290.x
14. C Mundo M Sommerfeld C Tropea 1995 Droplet-Wall Collisions: Experimental Studies of the Deformation and Breakup Process Int. J. Multiphas. Flow 21 2 151 173 1134.76617 1:CAS:528:DyaK2MXksFOktbc%3D 10.1016/0301-9322(94)00069-V
15. M. Bussmann, S.D. Aziz, S. Chandra, and J. Mostaghimi, 3D Modelling of Thermal Spray Droplet Splashing, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., 1998 (Nice, France), ASM International, 1998, p 413-418
16. X Jiang J Matejicek S Sampath 1999 Substrate Temperature Effects on the Splat Formation, Microstructure Development and Properties of Plasma Sprayed Coatings Part II: Case Study for Molybdenum Mater. Sci. Eng. A 272 1 189 198 10.1016/S0921-5093(99)00461-X
17. P Fauchais M Fukumoto A Vardelle M Vardelle 2004 Knowledge Concerning Splat Formation: An Invited Review J. Therm. Spray Technol. 13 3 337 360 1:CAS:528:DC%2BD2cXptFSnsLg%3D 10.1361/10599630419670 2004JTST...13..337F
18. M. Fukumoto, S. Katoh, and I. Okane, Splat Behavior of Plasma Sprayed Particles on Flat Substrate Surface, Thermal Spraying: Current Status and Future Trends, A.P.O. Ohmori, Ed., May, 1995 (Kobe, Japan), The Society, 1995, p 353-358
19. M. Fukumoto, Y. Huang, and M. Ohwatari, Flattening Mechanism in Thermal Sprayed Particle Impinging on Flat Substrate, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., 1998 (Nice, France), ASM International, 1998, p 401-406
20. M Fukumoto E Nishioka T Matsubara 2002 Effect of Interface Wetting on Flattening of Freely Fallen Metal Droplet onto Flat Substrate Surface J. Therm. Spray Technol. 11 1 69 74 1:CAS:528:DC%2BD38XjvFOjtLo%3D 10.1361/ 105996302770348998 2002JTST...11...69F
21. L Bianchi AC Leger M Vardelle A Vardelle P Fauchais 1997 Splat Formation and Cooling of Plasma-Sprayed Zirconia Thin Solid Films 305 1-2 35 47 1:CAS:528:DyaK2sXlsFahur0%3D 10.1016/S0040-6090(97)80005-3 1997TSF...305...35B
22. C. Moreau, M. Lamontagne, and P. Cielo, Influence of the Coating Thickness on the Cooling Rate of Plasma-Sprayed Particles Impinging on a Substrate, Thermal Spray Coatings: Properties, Processes and Applications, T.F. Bernecki, Ed., May 4-10, 1991 (Pittsburgh, PA), 1991, p 237-243
23. M. Fukumoto, E. Nishioka, and T. Nishiyama, Proposal of New Criterion for Splashing of Thermal Sprayed Particle onto Flat Substrate Surface, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, Ed., 2001 (Singapore), ASM International, 2001, p 841-848
24. YY Wang CJ Li A Ohmori 2005 Influence of Substrate Roughness on the Bonding Mechanisms of High Velocity Oxy-Fuel Sprayed Coatings Thin Sol. Films 485 1-2 141 147 1:CAS:528:DC%2BD2MXlslWit7s%3D 10.1016/j.tsf.2005.03.024 2005TSF...485..141W
25. C Moreau P Gougeon M Lamontagne 1995 Influence of Substrate Preparation on the Flattening and Cooling of Plasma-Sprayed Particles J. Therm. Spray Technol. 4 1 25 33 1:CAS:528:DyaK2MXmtFWrs7s%3D 10.1007/BF02648525 1995JTST....4...25M
26. A McDonald S Chandra C Moreau 2008 Photographing Impact of Plasma-Sprayed Particles on Rough Substrates J. Mater. Sci. 43 13 4631 4643 1:CAS:528:DC%2BD1cXmt1Oqsrc%3D 10.1007/s10853-008-2669-z 2008JMatS..43.4631M
27. J Cedelle M Vardelle P Fauchais 2006 Influence of Stainless Steel Substrate Preheating on Surface Topography and on Millimeter- and Micrometer-Sized Splat Formation Surf. Coat. Technol. 201 3-4 1373 1382 1:CAS:528:DC%2BD28XptlOisr0%3D 10.1016/j.surfcoat.2006.02.003
28. M Fukumoto T Yamaguchi M Yamada T Yasui 2007 Splash Splat to Disk Splat Transition Behavior in Plasma-Sprayed Metallic Materials J. Therm. Spray Technol. 16 5-6 905 912 1:CAS:528:DC%2BD1cXpvVSmsg%3D%3D 10.1007/s11666-007- 9083-y 2007JTST...16..905F
29. X Jiang Y Wan H Herman S Sampath 2001 Role of Condensates and Adsorbates on Substrate Surface on Fragmentation of Impinging Molten Droplets During Thermal Spray Thin Solid Films 385 1-2 132 141 1:CAS:528:DC%2BD3MXhvVWqt70%3D 10.1016/S0040-6090(01)00769-6 2001TSF...385..132J
30. A Abedini A Pourmousa S Chandra J Mostaghimi 2006 Effect of Substrate Temperature on the Properties of Coatings and Splats Deposited by Wire Arc Spraying Surf. Coat. Technol. 201 6 3350 3358 1:CAS:528:DC%2BD28Xht1ags7nF 10.1016/j.surfcoat.2006.07.184
31. H. Yamada, S. Kuroda, T. Fukushima, and H. Yumoto, Capture and Evaluation of HVOF Thermal Sprayed Particles by a Gel Target, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, Ed., 2001 (Singapore), ASM International, 2001, p 797-804
32. W Trompetter M Hyland D McGrouther P Munroe A Markwitz 2006 Effect of Substrate Hardness on Splat Morphology in High-Velocity Thermal Spray Coatings J. Therm. Spray Technol. 15 4 663 669 1:CAS:528:DC%2BD2sXptlansA%3D%3D 10.1361/105996306X147261 2006JTST...15..663T
33. E. Strock, P. Ruggiero, and D. Reynolds, The Effect of Off-Angle Spraying on the Structure and Properties of HVOF WC/CoCr Coatings, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, Ed., 2001 (Singapore), ASM International, 2001, p 671-676
34. W. Tillmann, E. Vogli, and B. Krebs, Influence of the Spray Angle on Characteristics for Atmospheric Plasma Sprayed Hard Material Based Coatings, Thermal Spray 2008: Thermal Spray Crossing Borders, E. Lugscheider, Ed., 2008 (Maastricht, NL), DVS-German Welding Society, 2008, p 247-252
35. J.F. Bisson, M. Lamontagne, C. Moreau, L. Pouliot, J. Blain, and F. Nadeau, Ensemble In-Flight Particle Diagnostics under Thermal Spray Conditions, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Ed., May 28-30, 2001 (Singapore), ASM International, 2001, p 705-714
36. CK Law A Makino TF Lu 2006 On the Off-Stoichiometric Peaking of Adiabatic Flame Temperature Combust. Flame 145 4 808 819 1:CAS:528:DC%2BD28XltVOqtr0%3D 10.1016/j.combustflame.2006.01.009
37. WC Oliver GM Pharr 1992 An Improved Technique for Determining Hardness and Elastic-Modulus Using Load and Displacement Sensing Indentation Experiments J. Mater. Res. 7 6 1564 1583 1:CAS:528:DyaK38XktlWqtb4%3D 10.1557/JMR.1992.1564 1992JMatR...7.1564O
38. C Kerr P Ivey 2002 An Overview of the Measurement Errors Associated with Gas Turbine Aeroengine Pyrometer Systems Meas. Sci. Technol. 13 6 873 881 1:CAS:528:DC%2BD38XltlOisbs%3D 10.1088/0957-0233/13/6/307 2002MeScT..13..873K
39. R. Molz, A. Valarezo, and S. Sampath, Comparison of Coating Stresses Produced by High Velocity Liquid/Gas Fuel and Triplex Pro 200 Plasma Processes Using In Situ Coating Stress Measurement, Thermal Spray 2008: Thermal Spray Crossing Borders, E. Lugscheider, Ed., 2008 (Maastricht, NL), DVS-German Welding Society, 2008, p 473-478