Formability of TWIP (twinning induced plasticity) automotive sheets

International Journal of Plasticity

Volumn 27, Issue 1, 2011, Pages 52-81

  Chung, Kwansoo ^a   Ahn, Kanghwan ^a   Yoo, Dong Hoon ^a   Chung, Kyung Hwan ^b   Seo, Min Hong ^b   Park, Sung Ho ^b  

^a Seoul National University   (South Korea)

^b POSCO   (South Korea)

Author keywords

FLD; Formability; Sheet metal forming; TWIP steel; Yld2000 2d

Indexed keywords

ANISOTROPIC PROPERTY; ANISOTROPIC YIELD FUNCTIONS; AUTOMOTIVE SHEETS; CYLINDRICAL CUP DRAWING; DIFFUSE AND LOCALIZED NECKING; DIFFUSE THEORY; FLD; FORMING LIMIT DIAGRAMS; ISOTROPIC HARDENINGS; M-K THEORY; NUMERICAL SIMULATION; SIMULATION PROGRAM; STRAIN RATE SENSITIVITY; STRAIN RATE TESTS; TENSION AND COMPRESSION; TENSION TESTS; THEORETICAL PREDICTION; THREE POINT BENDING; TWIP STEEL; YIELD FUNCTION; YLD2000-2D;

ANISOTROPY; BENDING TESTS; COMPRESSION TESTING; COMPUTER SIMULATION; DRAWING (FORMING); MECHANICAL PROPERTIES; METAL FORMING; PLASTICITY; SHEET METAL; TENSILE TESTING;

STRAIN RATE;

EID: 78049437101     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2010.03.006     Document Type: Article

References (48)

1. ABAQUS, 2007. User's Manual (Version 6.7), Hibbit, Karlsson & Sorensen Inc., USA.
2. K. Ahn, D. Yoo, M.H. Seo, S.H. Park, and K. Chung Springback prediction of TWIP automotive sheets Met. Mater. Int. 15 2009 637
3. S. Allain, J.P. Chateau, and O. Bouaziz A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel Mater. Sci. Eng. A 387-389 2004 143
4. H. Aretz Numerical analysis of diffuse and localized necking in orthotropic sheet metals Int. J. Plasticity 23 2007 798
5. S. Asgari, E. El-Danaf, S.R. Kalidindi, and R.D. Doherty Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that forms deformation twins Metall. Mater. Trans. A 28A 1997 1781
6. D. Barbier, N. Gey, S. Allain, N. Bozzolo, and M. Humbert Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions Mater. Sci. Eng. A 500 2009 196
7. F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, and E. Chu Plane stress yield function for aluminum alloy sheets-part 1: theory Int. J. Plasticity 19 2003 1297
8. F. Barlat, K. Chung, and O. Richmond Anisotropic potentials for polycrystals and application to the design of optimum blank shapes in sheet forming Metall. Trans. 25A 1994 1209
9. Bäumer, A., Bleck, W., 2007. Strain hardening behavior of modern light-weight car body sheet steels. In: Tisza, M. (Ed.), Proceedings of the IDDRG 2007, p. 47.
10. O. Bouaziz, and N. Guelton Modelling of TWIP effect on work-hardening Mater. Sci. Eng. A 319-321 2001 246
11. Brozzo, P., Deluca, B., Rendina, R., 1972. A new method for the prediction of formability in metal sheet. Sheet metal forming and formability. In: Proceedings of the Seventh Biennial Conference of the IDDRG.
12. Chung, K., Wagoner, R. H., 1986. Finite element analysis of sheet tensile test. Formability and metallurgical structure. In: Sachdev, A., Embury, J. (Eds.), TMS-AIME, p. 261.
13. K. Chung, S.Y. Lee, F. Barlat, Y.T. Keum, and J.M. Park Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential Int. J. Plasticity 12 1996 93
14. K. Chung, M.G. Lee, D. Kim, C. Kim, M.L. Wenner, and F. Barlat Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part I: theory and formulation Int. J. Plasticity 21 2005 861
15. S.E. Clift, P. Hartely, C.E.N. Sturgess, and G.W. Rowe Fracture prediction in plastic deformation processes Int. J. Mech. Sci. 32 1990 1
16. M.G. Cockcroft, and D.J. Latham Ductility and the workability of metals J. Inst. Met. 96 1968 33
17. Cornette, D., Cugy, P., Hildenbrand, A., Bouzekri, M., 2005. Ultra high strength FeMn TWIP steels for automotive safety parts. In: SAE International, 2005-01-1327.
18. G.E. Dieter Workability Testing Techniques 1987 American Society for Metals
19. J.E. Dorn, and E.G. Thomsen The ductility of metals under general conditions of stress and strain Trans. Am. Soc. Met. 39 1947 741
20. Eyckens, P., Bael, A.V., Houtte, P.V., 2009. Marciniak-Kuczynski type modeling of the effect of through-thickness shear on the forming limits of sheet metal. Int. J. Plasticity, doi:10.1016/j.ijplas.2009.02.002.
21. F.D. Fischer, O. Kolednik, G.X. Shan, and F.G. Rammerstorfer A note on calibration of ductile failure damage indicators Int. J. Fracture 73 1995 345
22. O. Grassel, L. Kruger, G. Frommeyer, and L.W. Meyer High strength Fe-Mn-(Al, Si) TRIP/TWIP steels : development, properties, and application Int. J. Plasticity 16 2000 1391
23. R. Hill A theory of the yielding and plastic flow of anisotropic metals Proc. Roy. Soc. Lond. Ser. A 193 1948 281
24. R. Hill On discontinuous plastic states with special reference to localized necking in thin sheets J. Mech. Phys. Solids 1 1952 19
25. H. Huh, S.S. Han, and D.Y. Yang Modified membrane finite element formulation considering bending effects in sheet metal forming analysis Int. J. Mech. Sci. 36 1994 659
26. H. Jiang, Q. Zhang, X. Chen, Z. Chen, and Z. Jiang Three types of Portevin-Le Chatelier effects: experiment and modelling Acta Mater. 55 2007 2219
27. S.P. Keeler, and W.A. Backofen Plastic instability and fracture in sheets stretched over rigid punches ASM Trans. Quart. 56 1964 25
28. Kim, D., 2005. Formability of Automotive Sandwich and Friction Stir Welded Sheets. Ph.D. Thesis, Department of Materials Science and Engineering, Seoul National University, p. 123.
29. M.A. Le Chatelier Influence du Temps et de la Temperature sur les Essais au Choc Rev. Metal. 6 1909 914
30. M.G. Lee, D. Kim, C. Kim, M.L. Wenner, R.H. Wagoner, and K. Chung Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part II: characterization of material properties Int. J. Plasticity 21 2005 883
31. Z. Marciniak, and K. Kuczynski Limits strains in the processes of stretch-forming sheet metal Int. J. Mech. Sci. 9 1967 609
32. E. Nakamachi, C.L. Xie, H. Morimoto, K. Morita, and N. Yokoyama Formability assessment of fcc aluminum alloy sheet by using elastic/crystalline viscoplastic finite element analysis Int. J. Plasticity 18 2002 617
33. F. Negroni, and E.G. Thomsen On the plastic tensile instability criteria ASME J. Eng. Ind. 91 1969 659
34. C.J. Neil, and S.R. Agnew Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B Int. J. Plasticity 25 2009 379
35. D.M. Norris, J.E. Reaugh, B. Moran, and D.F. Quinones A plastic strain, mean-stress criterion for ductile fracture J. Eng. Mater. Technol. 100 1978 279
36. M. Oyane, T. Sato, K. Okimoto, and S. Shima Criteria for ductile fracture and their applications J. Mech. Work Technol. 4 1980 65
37. A. Portevin, and F. Le Chatelier Effect in annealed and solution-treated aluminum alloys C. R. Acad. Sci. Paris 176 1923 507
38. V.H. Schumann Martensitische Umwandlung in austenitischen Mangan-Kohlenstoff-Stählen Neue Hutte 17 1972 605
39. C. Scott, S. Allain, M. Faral, and N. Guelton The development of a new Fe-Mn-C austenitic steel for automotive applications Rev. Metal. 103/6 2006 293
40. S.L. Semiatin, and J.J. Jonas Formability and workability of metals: plastic instability and flow localization 1984 ASM International Metals Park, OH p. 200
41. M.N. Shiekhelsouk, V. Favier, K. Inal, and M. Cherkaoui Modelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect Int. J. Plasticity 25 2009 105
42. J.W. Signorelli, M.A. Bertinetti, and P.A. Turner Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model Int. J. Plasticity 25 2009 1
43. H.W. Swift Plastic instability under plane stress J. Mech. Phys. Solids 1 1952 1
44. P.D. Wu, J.D. Embury, D.J. Lloyd, Y. Huang, and K.W. Neale Effects of superimposed hydrostatic pressure on sheet metal formability Int. J. Plasticity 25 2009 1711
45. R. Xiong, R. Fu, Y. Su, Q. Li, X. Wei, and L. Li Tensile properties of TWIP steel at high strain rate J. Iron. Steel Res. Int. 16 2009 81
46. Xu, L., Barlat, F., 2008. Disk compression testing of advanced steel sheet samples. In: Yang, D.Y., Kim, Y.H., Park, C.H. (Eds.), Proceedings of the ICTP 2008, p. 867.
47. D.Y. Yang, S.I. Oh, H. Huh, and Y.H. Kim Benchmark test a: deep drawing of cylindrical cup Proc. Numisheet 2 2002 677
48. Zadpoor, A.A., Sinke, J., Benedictus, R., 2009. Formability prediction of high strength aluminum sheets. Int. J. Plasticity, doi:10.1016/j.ijplas.2009. 02.005.