Advances in friction welding process: A review

Science and Technology of Welding and Joining

Volumn 15, Issue 7, 2010, Pages 534-558

  Uday, M B ^a   Fauzi, M N Ahmad ^a   Zuhailawati, H ^a   Ismail, A B ^a  

^a SCHOOL OF MATERIALS AND MINERAL RESOURCES ENGINEERING   (Malaysia)

Author keywords

Ceramic; Dissimilar; Friction welding; Metal; Similar

Indexed keywords

CERAMIC; DISSIMILAR; ELECTRICAL ENERGY; MECHANICAL ENERGIES; PHYSICAL CHARACTERISTICS; RELATIVE MOTION; RELATIVE MOVEMENT; SIMILAR; WELDED MATERIALS; WORK PIECES;

CERAMIC MATERIALS; FRICTION; FRICTION WELDING; INDUSTRIAL APPLICATIONS; JOINING; TRIBOLOGY; WELDING;

DISSIMILAR METALS;

EID: 77958492381     PISSN: 13621718     EISSN: 13621718     Source Type: Journal    
DOI: 10.1179/136217110X12785889550064     Document Type: Review

References (110)

1. B. S. Yilbas, A. Z. Sahin, N. Kahraman and A. Z. Al-Garni: 'Friction welding of St-Al and Al-Cu materials', J. Mater. Process. Technol., 1995, 49, (3-4), 431-443.
2. C. Y. Kang, T. H. North and D. D. Perovic: 'Microstructural features of friction welded MA 956 superalloy material', Metall. Mater. Trans. A, 1996, 27A, (12), 4019-4029.
3. C. B. Lin, I. C. Chou and C. L. Ma: 'Manufacturing and friction welding properties of particulate reinforced 7005 Al', J. Mater. Sci., 2002, 37, (21), 4645-4652.
4. I. Woo, M. Aritoshi and Y. Kikuchi: 'Metallurgical and mechanical properties of high nitrogen austenitic stainless steel friction welds', ISIJ Int., 2002, 42, (4), 401-406.
5. W. B. Lee, Y. M. Yeon, D. U. Kim and S. B. Jung: 'Effect of friction welding parameters on mechanical and metallurgical properties of aluminium alloy 5052-A36 steel joint', Mater. Sci. Technol., 2003, 19, (6), 773-778.
6. T. C. Nguyen and D. C.Weckman: 'A thermal and microstructure evolution model of direct-drive friction welding of plain carbon steel', Metall. Mater. Trans. B, 2006, 37B, (2), 275-292.
7. Q. Z. Zhang, L. W. Zhang, W. W. Liu, X. G. Zhang, W. H. Zhu and S. Qu: '3D rigid viscoplastic FE modelling of continuous drive friction welding process', Sci. Technol. Weld. Join., 2006, 11, (6), 737-743.
8. H. Ates, M. Turker and A. Kurt: 'Effect of friction pressure on the properties of friction welded MA956 iron-based superalloy', Mater. Des., 2007, 28, (3), 948-953.
9. P. Sathiya, S. Aravindan and A. N. Haq: 'Effect of friction welding parameters on mechanical and metallurgical properties of ferritic stainless steel', Int. J. Adv. Manuf. Technol., 2007, 31, (11), 1076-1082.
10. K. Faes, W. Vermeirsch, P. de Baets, R. Denys and E. van der Donckt: 'Influence of forge pressure on properties of friction welded pipelines using intermediate ring', Sci. Technol. Weld. Join., 2008, 13, (5), 445-451.
11. M. Maalekian, E. Kozeschnik, H. P. Brantner and H. Cerjak: 'Finite element modeling of orbital friction welding of eutectoid steel bars', Metall. Mater. Trans. A, 2008, 39A, (4), 844-852.
12. P. Sathiya, S. Aravindan and A. N. Haq: 'Some experimental investigations on friction welded stainless steel joints', Mater. Des., 2008, 29, (6), 1099-1109.
13. M. Maalekian, E. Kozeschnik, H. P. Brantner and H. Cerjak: 'Comparative analysis of heat generation in friction welding of steel bars', Acta Mater., 2008, 56, (12), 2843-2855.
14. M. Maalekian: 'Friction welding critical assessment of literature', Sci. Technol. Weld. Join., 2007, 12, (8), 738-759.
15. R. L. O'Brien (ed.): in 'Welding handbook', Vol.2, 'Welding processes (retroactive coverage)'; 1991, Miami, FL, American Welding Society.
16. E. D. Nicholas: 'Friction processing technologies', Weld. World, 2003, 47, (11-12), 2-9.
17. M. Brantner: 'Comparative analysis of heat generation in friction welding of steel bars', Acta Mater., 2008, 56, 12.
18. L. D'Alvise, E. Massoni and S. J. Walløe: 'Finite element modelling of the inertia friction welding process between dissimilar materials', J. Mater. Process. Technol., 2002, 125, 387-391.
19. M. G. Reddy, S. A. Rao and T. Mohandas: 'Role of electroplated interlayer in continuous drive friction welding of AA6061 to AISI 304 dissimilar metals', Sci. Technol. Weld. Join., 2008, 13, 619-628.
20. H. Y. Li, Z. W. Huang, S. Bray, G. Baxter and P. Bowen: 'High temperature fatigue of friction welded joints in dissimilar nickel based superalloys', Mater. Sci. Technol., 2007, 23, 1408-1418.
21. F. Daus, H. Y. Li, G. Baxter, S. Bray and P. Bowen: 'Mechanical and microstructural assessments of RR1000 to IN718 inertia welds effects of welding parameters', Mater. Sci. Technol., 2007, 23, 1424-1432.
22. K. S. Mortensen, C. G. Jensen, L. C. Conrad and F. Losee: 'Mechanical properties and microstructures of inertia friction welded 416 stainless steel', Weld. J. Res. Suppl., 2001, 268-273.
23. M. Sahin: 'Characterization of properties in plastically deformed austenitic-stainless steels joined by friction welding', Mater. Des., 2009, 30, (1), 135-144.
24. M. Sahin: 'Joining of stainless steel and copper materials with friction welding', Ind. Lubr. Tribol., 2009, 61, (6), 319-324.
25. M. Sahin: 'Evaluation of the joint-interface properties of austenitic-stainless steels (AISI 304) joined by friction welding', Mater. Des., 2007, 28, (7), 2244-2250.
26. R. E. Craine and A. Francis: 'Frictional heat generated in the early stages of an orbital friction welding process', Wear, 1987, 114, (3), 355-365.
27. D. Harris and A. F. Norman: 'Properties of friction stir welded joints: a review of the literature', EUROSTIR, Progress report presented at the 6th PSG Meet., June 2003,18.
28. M. Mahoney, C. Rhodes, J. Flintoff, W. Bingel and R. Spurling: 'Properties of friction-stir-welded 7075 T651 aluminum', Metall. Mater. Trans. A, 1998, 29A, (7), 1955-1964.
29. J. Q. Su, T. W. Nelson, R. Mishra and M. Mahoney: 'Microstructural investigation of friction stir welded 7050-T651 aluminium', Acta Mater., 2003, 51, (3), 713-729.
30. H. Schmidt, J. Hattel and J. Wert: 'An analytical model for the heat generation in friction stir welding', Model. Simul. Mater. Sci. Eng., 2004, 12, 143.
31. S. Xu, X. Deng, A. P. Reynolds and T. U. Seidel: 'Finite element simulation of material flow in friction stir welding', Sci. Technol. Weld. Join., 2001, 6, 191-193.
32. P. Staron, M. Koçak and S. Williams: 'Residual stresses in friction stir welded Al sheets', Appl. Phys. A, 2002, 74A, (1), s1161-s1162.
33. T. U. Seidel and A. P. Reynolds: 'Two-dimensional friction stir welding process model based on fluid mechanics', Sci. Technol. Weld. Join., 2003, 8, 175-183.
34. Wikipedia: 'Friction stir welding', http://en.wikipedia.org/wiki/ Friction-stir-welding (accessed 11 June 2010).
35. P. L. Threadgill: 'Terminology in friction stir welding', Sci. Technol. Weld. Join., 2007, 12, 357-360.
36. D. R. Johnson: 'Solid state joining techniques', Mater. World, 1999, 7, (11), 684-685, http://www.azom.com/ details.asp?ArticleID5973.
37. Q. Y. Shi, J. Silvanus, Y. Liu, D. Y. Yan and H. K. Li: 'Experimental study on distortion of Al-6013 plate after friction stir welding', Sci. Technol. Weld. Join., 2008, 13, 472-478.
38. C. Hamilton, S. Dymek, I. Kalemba and M. Blicharski: 'Friction stir welding of aluminium 7136-T76511 extrusions', Sci. Technol. Weld. Join., 2008, 13, 714-720.
39. P. A. Fleming, D. H. Lammlein, D.M.Wilkes, G. E. Cook, A. M. Strauss, D. R. Delapp and D. A. Hartman: 'Misalignment detection and enabling of seam tracking for friction stir welding', Sci. Technol. Weld. Join., 2009, 14, 93-96.
40. J. Luo, X. J. Wang and J. X. Wang: 'New technological methods and designs of stir head in resistance friction stir welding', Sci. Technol. Weld. Join., 2009, 14, 650-654.
41. S. G. Arul, S. F. Miller, G. H. Kruger, T. Y. Pan, P. K. Mallick and A. J. Shih: 'Experimental study of joint performance in spot friction welding of 6111-T4 aluminium alloy', Sci. Technol. Weld. Join., 2008, 13, 629-637.
42. M. Kimura, K. Seo, M. Kusaka and A. Fuji: 'Observation of joining phenomena in friction stage and improving friction welding method', JSME Int. J. Ser. A, 2003, 46A, (3), 384-390.
43. S. Fukumoto, T. Inoue, S. Mizuno, K. Okita, T. Tomita and A. Yamamoto: 'Friction welding of TiNi alloy to stainless steel using Ni interlayer', Sci. Technol. Weld. Join., 2010, 15, 124-130.
44. S. B. Jamaludin, Y. C. Keat and Z. A. Ahmad: 'The effect of varying process parameters on the microhardness and microstructure of Cu-steel and Al-Al2O3 friction joints', J. Teknol., 2004, 41, (A), 85-95.
45. S. Mousavi and A. R. Kelishami: 'Experimental and numerical analysis of the friction welding process for the 4340 steel and mild steel combinations', 2008, 178-s-186-s.
46. Ø. Grong and D. Grong: 'Metallurgical modelling of welding'; 1997, London, Institute of Materials.
47. M. Maalekian: 'Thermal modeling of friction welding', ISIJ Int., 2008, 48, (10), 1429-1433.
48. M. Maalekian and H. Cerjak: 'Modelling the orbital friction welding of pearlitic steel bars', Trends in welding research, 2009, 736-741.
49. M. Maalekian: 'Characterization and optimization of orbital friction welding of high carbon steel bars', IIW Granjon, Int. Ins. of Welding, 61st Annual Assembly, Congress Graz, Austria, July 2008.
50. G. A. Moraitis and G. N. Labeas: 'Investigation of friction stir welding process with emphasis on calculation of heat generated due to material stirring', Sci. Technol. Weld. Join., 2010, 15, 177-184.
51. R. Nandan, G. G. Roy, T. J. Lienert and T. DebRoy: 'Threedimensional heat and material flow during friction stir welding of mild steel', Acta Mater., 2007, 55, (3), 883-895.
52. R. Nandan, T. DebRoy and H. Bhadeshia: 'Recent advances in friction-stir welding-Process, weldment structure and properties', Prog. Mater. Sci., 2008, 53, (6), 980-1023.
53. M. Kimura, M. Choji, M. Kusaka, K. Seo and A. Fuji: 'Effect of friction welding conditions on mechanical properties of A5052 aluminium alloy friction welded joint', Sci. Technol. Weld. Join., 2006, 11, (2), 209-215.
54. M. Kimura, M. Choji, M. Kusaka, K. Seo and A. Fuji: 'Effect of friction welding conditions and aging treatment on mechanical properties of A7075-T6 aluminium alloy friction joints', Sci. Technol. Weld. Join., 2005, 10, (4), 406-412.
55. B. S. Yilbas, A. Z. Sahin, A. Coban and B. J. A. Aleem: 'Investigation into the properties of friction-welded aluminium bars', J. Mater. Process. Technol., 1995, 54, (1-4), 76-81.
56. V. Balasubramanian, Y. Li, T. Stotler, J. Crompton, A. Soboyejo, N. Katsube and W. Soboyejo: 'A new friction law for the modelling of continuous drive friction welding: applications to 1045 steel welds', Mater. Manuf. Process., 1999, 14, (6), 845-860.
57. G. M. Reddy and K. S. Rao: 'Microstructure and mechanical properties of similar and dissimilar stainless steel electron beam and friction welds', Int. J. Adv. Manuf. Technol., 2009, 45, (9), 875-888.
58. V. V. Satyanarayana and T. Mohandas: 'Continuous drive friction welding studies on AISI 430 ferritic stainless steel', Sci. Technol. Weld. Join., 2003, 8, (3), 184-193.
59. A. Rajasekhar, G. M. Reddy, T. Mohandas and V. S. R. Murti: 'Influence of post-weld heat treatments on microstructure and mechanical properties of AISI 431 martensitic stainless steel friction welds', Mater. Sci. Technol., 2008, 24, (2), 201-212.
60. M. Ahin and H. E. Akata: 'Joining with friction welding of plastically deformed steel', J. Mater. Process. Technol., 2003, 142, (1), 239-246.
61. M. Kimura, Y. Ohtsuka, M. Kusaka, K. Seo and A. Fuji: 'Effect of friction time and friction pressure on tensile strength of welded joint for medium and high carbon steels by low heat input friction welding method', Q. J. Jpn Weld. Soc., 2005, 23, (4), 577-586.
62. M. Kimura, M. Kusaka, K. Seo and Y. Muramatsu: 'Properties and improvement of super fine grained steel friction welded joint', Sci. Technol. Weld. Join., 2006, 11, (4), 448-454.
63. H. Takegami and T. Shinoda: 'Friction welding of Cr-Zr copper alloy', Q. J. Jpn Weld. Soc., 2004, 22, (3), 477-483.
64. M. Avinash, G. V. K. Chaitanya, D. K. Giri, S. Upadhya and B. K. Muralidhara: 'Microstructure and mechanical behaviuor of rotary friction welded titanium alloys', Proceedings of World Academy of Science Engineering and Technology, 2007, 35, 146-148.
65. G. A. Pinheiro, C. A. Olea, J. F. dos Santos and K. U. Kainer: 'Microstructural and mechanical behavior of friction welds in a high creep resistance magnesium alloy', Adv. Eng. Mater., 2007, 9, (9), 757.
66. M. Aritoshi and K. Okita: 'Friction welding of dissimilar metals', Weld. Int., 2003, 17, (4), 271-275.
67. K. K. H. Tokisue: 'Dissimilar friction welding of aluminium alloys to other materials', Weld. Int., 2004, 18, (11), 861-867.
68. S. Fukumoto, H. Tsubakino, K. Okita, M. Aritoshi and T. Tomita: 'Friction welding process of 5052 aluminium alloy to 304 stainless steel', Mater. Sci. Technol., 1999, 15, (9), 1080-1086.
69. S. Fukumoto, H. Tsubakino, M. Aritoshi, T. Tomita and K. Okita: 'Dynamic recrystallisation phenomena of commercial purity aluminium during friction welding', Mater. Sci. Technol., 2002, 18, (2), 219-225.
70. M. Kimura, H. Ishii, M. Kusaka, K. Kaizu and A. Fuji: 'Joining phenomena and joint strength of friction welded joint between aluminiummagnesium alloy (AA5052) and low carbon steel', Sci. Technol. Weld. Join., 2009, 14, 655-661.
71. A. Z. Sahin, B. S. Yilbas and A. Z. Al-Garni: 'Friction welding of Al-Al, Al-steel, and steel-steel samples', J. Mater. Eng. Perform., 1996, 5, (1), 89-99.
72. M. Y. Imaz, M. Çöl and M. Acet: 'Interface properties of aluminum/steel friction-welded components', Mater. Charact., 2002, 49, (5), 421-429.
73. A. Kobayashi, M. Machida, S. Hukaya and M. Suzuki: 'Friction welding characteristics of Al-Mg aluminum alloy (A5056) and carbon steel (S45C)', JSME Int. J. Ser. A, 2003, 46A, (3), 452-459.
74. T. Yokoyama: 'Impact tensile properties of friction welded butt joints between 6061 aluminum alloy and type 304 stainless steel', JSME Int. J. Ser. A, 2003, 46A, (3), 308-315.
75. M. Sahin: 'Joining of stainless-steel and aluminium materials by friction welding', Inte. J. Adv. Manuf. Technol., 2009, 41, (5), 487-497.
76. Y. L. Song, Y. H. Liu, X. Y. Zhu, S. R. Yu and Y. B. Zhang: 'Strength distribution at interface of rotary-friction-welded aluminum to nodular cast iron', Trans. Nonferrous Met. Soc. China, 2008, 18, 14-18.
77. M. Yilmaz, E. Kaluc, K. Tülbentci and S. Karagöz: 'Investigation into the weld zone of friction welded C45/HS6-5-2 dissimilar steel joints', J. Mater. Sci. Lett., 1996, 15, (4), 360-362.
78. A. Z. Sahin, B. S. Yibas, M. Ahmed and J. Nickel: 'Analysis of the friction welding process in relation to the welding of copper and steel bars', J. Mater. Process. Technol., 1998, 82, (1), 127-136.
79. N. Özdemir: 'Investigation of the mechanical properties of friction-welded joints between AISI 304L and AISI 4340 steel as a function rotational speed', Mater. Lett., 2005, 59, (19-20), 2504-2509.
80. V. V. Satyanarayana, G. M. Reddy and T. Mohandas: 'Dissimilar metal friction welding of austenitic-ferritic stainless steels', J. Mater. Process. Technol., 2005, 160, (2), 128-137.
81. V. Mohandas: 'Effect of surface roughness on the friction welded austenitic-ferritic stainless steel dissimilar joints', J. Inst. Eng. (India), 2007, 88, 3-7.
82. T. Uwaba, S. Ukai, T. Nakai and M. Fujiwara: 'Properties of friction welds between 9Cr-ODS martensitic and ferritic-martensitic steels', J. Nucl. Mater., 2007, 367, 1213-1217.
83. W.-Y. Li, M. Yu, J. Li, G. Zhang and S. Wang: 'Characterizations of 21-4N to 4Cr9Si2 stainless steel dissimilar joint bonded by electric-resistance-heat- aided friction welding', Mater. Des., 2009, 30, (10), 4230-4235.
84. J. Domblesky and F. F. Kraft: 'Metallographic evaluation of welded forging preforms', J. Mater. Process. Technol., 2007, 191, (1-3), 82-86.
85. D. Ananthapadmanaban, V. S. Rao, N. Abraham and K. P. Rao: 'A study of mechanical properties of friction welded mild steel to stainless steel joints', Mater. Des., 2009, 30, (7), 2642-2646.
86. H. C. Dey, M. Ashfaq, A. K. Bhaduri and K. P. Rao: 'Joining of titanium to 304L stainless steel by friction welding', J. Mater. Process. Technol., 2009, 209, (18-19), 5862-5870.
87. M. Kimura, K. Kasuya, M. Kusaka, K. Kaizu and A. Fuji: 'Effect of friction welding condition on joining phenomena and joint strength of friction welded joint between brass and low carbon steel', Sci. Technol. Weld. Join., 2009, 14, (5), 704-712.
88. M. Kimura, D. Utsumi, M. Kusaka and K. Kaizu: 'Selection guide of insert piece shape for steel joint by autocompleting friction welding method', Sci. Technol. Weld. Join., 2009, 14, 570-576.
89. M. Kimura, T. Fujii, D. Utsumi, M. Kusaka and K. Seo: 'Development of autocompleting friction welding method', Sci. Technol. Weld. Join., 2008, 13, 184-191.
90. S. Rao, K. Jayabharath, M. Ashfaq and V. Krishna: 'Preliminary studies on friction welding of sintered P/M steel preforms to wrought mild steel', Sci. Technol. Weld. Join., 2006, 11, (2), 183-190.
91. A. Fuji, Y. Horiuchi and K. Yamamoto: 'Friction welding of pure titanium and pure nickel', Sci. Technol. Weld. Join., 2005, 10, (3), 287-294.
92. S. D. Meshram, T. Mohandas and G. M. Reddy: 'Friction welding of dissimilar pure metals', J. Mater. Process. Technol., 2007, 184, (1-3), 330-337.
93. A. Hascalik and N. Orhan: 'Effect of particle size on the friction welding of Al2O3 reinforced 6160 Al alloy composite and SAE 1020 steel', Mater. Des., 2007, 28, (1), 313-317.
94. T. J. Lienert, W. A. Baeslack, J. Ringnalda and H. L. Fraser: 'Inertia-friction welding of SiC-reinforced 8009 aluminium', J. Mater. Sci., 1996, 31, (8), 2149-2157.
95. C. B. Lin, C. K. Mu, W. W. Wu and C. H. Hung: 'The effect of joint design and volume fraction on friction welding properties of A360/SiC (p) composites', Weld. J., 1999, 78, 100s-108s.
96. K. Kanayama, Y. Tasaki, M. Machida, S. Kume and S. Aoki: 'Joining of ceramics by friction welding', Trans. Jpn Weld. Soc., 1985, 16, (1), 95-96.
97. R. M. Nascimento, A. E. Martinelli and A. J. A. Buschinelli: 'Review article: recent advances in metal-ceramic brazing', Cerâmica, 2003, 49, 178-198.
98. Z. N. Mohamad, B. H. Luay and A. A. Zainal: 'Alumina-mild steel friction welded at lower rotational speed', J. Mater. Process. Technol., 2007, 10, 1016-1021.
99. M. N. Ahmad Fauzi, M. B. Uday, H. Zuhailawati and A. B. Ismail: 'Microstructure and mechanical properties of alumina- 6061 aluminum alloy joined by friction welding', Mater. Des., 2010, 31, (2), 670-676.
100. J. Zimmerman: 'Thermo-mechanical phenomena in friction welding Al2O3 ceramic to aluminium', Weld. Int., 2006, 20, (6), 462-465.
101. J. Zimmerman: 'Temperature distribution in the friction welding of Al2O3 ceramic to aluminium', Weld. Int., 2006, 20, (6), 457-461.
102. Z. Lindemann, K. Skalski, W. Wlosinski and J. Zimmerman: 'Thermo-mechanical phenomena in the process of friction welding of corundum ceramics and aluminium', Bull. Pol. Ac. Tech., 2006, 54, (1), 1-8.
103. J. Zimmerman, W. Wlosinski and Z. R. Lindemann: 'Thermomechanical and diffusion modelling in the process of ceramic- metal friction welding', J. Mater. Process. Technol., 2009, 209, (4), 1644-1653.
104. A. M. Joshi: 'Welding of plastics', http://www.metalwebnews. com/howto/plastics/welding-plastics.pdf.
105. R. J. Wise: 'Thermal welding of polymers'; 1999, Cambridge, Woodhead Publishing Ltd.
106. R. J. Crawford and Y. Tam: 'Friction welding of plastics', J. Mater. Sci., 1981, 16, (12), 3275-3282.
107. C. B. Lin, L. C. Wu and Y. Y. Chen: 'Friction welding of similar materials: Polypropylene, high-density polyethylene, and nylon-6', J. Appl. Polym. Sci., 2004, 91, (5), 2771-2780.
108. C. B. Lin and L. C. Wu: 'Friction welding of similar and dissimilar materials: PMMA and PVC', Polym. Eng. Sci., 2004, 40, (8), 1931-1941.
109. C. B. Lin, L. C. Wu and Y. C. Chou: 'Effect of solvent and cosolvent on friction welding properties between part of PMMA with PVC', J. Mater. Sci., 2003, 38, (12), 2563-2570.
110. A. Jarzebowski: 'Why friction welding makes sense in today's economy', Manuf. Today, Jul. 2005, 12-13.