Compliant hexagonal periodic lattice structures having both high shear strength and high shear strain

Materials and Design

Volumn 32, Issue 2, 2011, Pages 512-524

  Ju, Jaehyung ^a   Summers, Joshua D ^a  

^a Clemson University   (United States)

Author keywords

Elastic behavior; Honeycombs; Mechanical properties

Indexed keywords

7075-T6; BENDING LENGTH; CELL GEOMETRIES; CELLULAR STRUCTURE; CONSTITUENT MATERIALS; ELASTIC BEHAVIOR; ELASTIC LIMIT; FINITE ELEMENT ANALYSIS; HEXAGONAL HONEYCOMB; HIGH SHEAR; HONEYCOMB MODELS; HONEYCOMBS; IN-PLANE; LINEAR ELASTIC; NEGATIVE POISSON'S RATIOS; PERIODIC LATTICES; SHEAR MODULUS; SHEAR YIELD; SIMPLE SHEAR; TI-6AL-4V;

ALUMINUM ALLOYS; ELASTIC MODULI; FINITE ELEMENT METHOD; HIGH STRENGTH ALLOYS; HIGH STRENGTH STEEL; HONEYCOMB STRUCTURES; MECHANICAL PROPERTIES; POISSON RATIO; SHEAR STRAIN; TITANIUM; TITANIUM ALLOYS;

SHEAR STRENGTH;

EID: 77958485199     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.08.029     Document Type: Article

References (44)

1. Bitzer T. Honeycomb technology. London, UK: Charpman & Hall; 1997.
2. Vinson JR. The behavior of sandwich structures of isotropic and composite materials. Lancaster, PA: Technomic; 1999.
3. Cutler J. Understanding aircraft structures, 4th ed. Oxford (UK): Blackwell Publishing; 2005.
4. Stronge W.J., Shim V.P.W. Microdynamics of crushing in cellular solids. Trans ASME: J Eng Mater Technol 1988, 110:185-190.
5. Zhao H., Gary G. Crushing behavior of aluminum honeycombs under impact loading. Int J Impact Eng 1998, 21:827-836.
6. Honig A., Stronge W.J. In-plane dynamic crushing of honeycomb. Part I: crush band initiation and wave trapping. Int J Mech Sci 2002, 44:1665-1696.
7. Liu Y., Zhang X.C. The influence of cell micro-topology on the in-plane dynamic crushing of honeycombs. Int J Impact Eng 2009, 36:98-109.
8. Sigmund O., Torquato S. Design of materials with extreme thermal expansion using a three-phase topology optimization method. J Mech Phys Solids 1997, 45:1037-1067.
9. Silva E.C.N., Fonseca J.S.O., Kikuchi N. Optimal design of piezoelectric microstructure. Comput Mech 1997, 9:397-410.
10. Zhu F., Chen K.Z., Feng X.A. Development of a CAD modeling system for components made of multi heterogeneous materials. Mater Des 2005, 26:113-126.
11. Zhu F., Chen K.Z., Feng X.A. Visualized CAD models of objects made of a multiphase perfect material. Adv Eng Software 2006, 37:20-31.
12. Larsen U.D., Sigmund O., Bouwstra S. Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio. J Microelectromech Syst 1997, 6:99-106.
13. Olympio KR, Gandhi, F. Zero-ν cellular honeycomb flexible skins for one-dimensional wing morphing. In: Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference, AIAA2007-1735, Honolulu, Hawaii; 2007.
14. Bubert E, Woods KS, Kothera CS, Wereley NM. Design and fabrication of a passive 1-D morphing aircraft skin. In: Proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference, AIAA2008-2045, Schaumburg, IL; 2008.
15. Spadoni A., Ruzzene M. Static aeroelastic response of chiral-core airfoils. J Intell Mater Syst Struct 2007, 18:1067-1075.
16. Ju J, Summers JD, Ziegert J, Fadel G. Design of honeycomb meta-materials for high shear flexure. In: Proceedings of the ASME international design engineering technical conferences, DETC2009-87730, San Diego, CA; 2009.
17. Gibson L.J., Ashby M.F., Schajer G.S., Robertson C.I. The mechanics of two-dimensional cellular materials. Proc Roy Soc A 1982, 382:25-42.
18. Masters I.G., Evans K.E. Models for the elastic deformation of honeycombs. Compos Struct 1996, 35:403-422.
19. Abd El-Sayed F.K., Jones R., Burgess I.W. A theoretical approach to the deformation of honeycomb based composite materials. Composites 1979, 10:209-214.
20. Bezazi A., Scarpa F., Remillat C. A novel centresymmetric honeycomb composite structure. Compos Struct 2005, 71:536-564.
21. Balawi S., Abot J.L. A refined model for the effective in-plane elastic moduli of hexagonal honeycombs. Compos Struct 2008, 84:147-158.
22. Gonella S., Ruzzene M. Homogenization and equivalent in-plane properties of two dimensional periodic lattices. Int Solid Struct 2008, 45:2897-2915.
23. Wang A.J., McDowell D.L. In-plane stiffness and yield strength of periodic metal honeycombs. Trans ASME J Eng Mater Technol 2004, 126:137-156.
24. Chuang C.H., Huang J.S. Theoretical expressions for describing the stiffness and strength of regular hexagonal honeycombs with plateau boarders. Mater Des 2003, 24:263-272.
25. Fan H., Jin F., Fang D. Uniaxial local buckling strengths of periodic lattice composites. Mater Des 2009, 30:4136-4145.
26. Ju J, Summers JD, Ziegert J, Fadel G. Compliant hexagonal meso-structures having both high shear strength and high shear strain. In: Proceedings of the ASME international design engineering technical conferences, DETC2010-28672, Montreal, Quebec, Canada; 2010.
27. Shankar P, Ju J, Summers JD, Zeigert J. Influence of curved elements in auxetic honeycombs in high strain and flexure conditions. In: Proceedings of the ASME international design engineering technical conferences, DETC2010-28545, Montreal, Quebec, Canada, 2010.
28. Kolla A. Ju J, Summers JD. Investigation of chiral honeycomb geometry for shear flexure design. In: Proceedings of the ASME international design engineering technical conferences, DETC2010-28557, Montreal, Quebec, Canada; 2010.
29. Joshi S, Ju J, Berglind L, Rusly R, Summers JD, DesJardins J. Experimental damage characterization of honeycombs subjected to in-plane Shear loading. In: Proceedings of the ASME international design engineering technical conferences, DETC2010-28549, Montreal, Quebec, Canada, 2010.
30. Ju J, Ananthasayanam B. Summers JD, Joseph P. Design of cellular shear bands of a non-pneumatic tire - investigation of contact pressure. In: Proceedings of the SAE 2010 world congress and exhibition, 10AC-0148, Detroit, MI; 2010.
31. Berglind L, Ju J, Summers JD. Method to design honeycombs for a shear flexible structure. In: Proceedings of the SAE 2010 world congress and exhibition, 10AC-0107, Detroit, MI; 2010.
32. Ju J, Summers JD, Ziegert J, Fadel G. Cyclic energy loss of honeycombs under in-plane loading. In: Proceedings of the ASME international mechanical engineering congress and exposition, IMECE2009-12658, Lake Buena Vista, FL; 2009.
33. Wang X.L., Stronge W.J. Micropolar theory for two dimensional stresses in elastic honeycomb. Proc Roy Soc Lond A 1999, 455:2091-2166.
34. Kumar R.S., McDowell D.L. Generalized continuum modeling of 2D periodic cellular solids. Int Solids Struct 2004, 41:7399-7422.
35. Park S.K., Gao X.-L. Micromechanical modeling of honeycomb structures based on a modified couple stress theory. Mech Adv Mater Struct 2008, 15:574-593.
36. Lan L.-H., Fu M.-H. Nonlinear constitutive relations of cellular materials. AIAA J 2009, 47:264-270.
37. Ju J, Summers JD. Hyperelastic constitutive modeling of hexagonal honeycombs subjected to in-plane shear loading. Trans ASME: J Eng Mater Technol; in press.
38. Gear J., Timoshenko S. Mechanics of materials, 3rd ed 1990, PWS-Kent Publishing Company, Boston.
39. Liu D., Atkinson H.V., Kapranos P., Jirattiticharoean W., Joness H. Microstructural evolution and tensile mechanical properties of thixoformed high performance aluminum alloys. Mater Sci Eng A 2003, 361:213-224.
40. Li J., Peng Z., Li C., Jia Z., Chen W., Zheng Z. Mechanical properties, corrosion behaviors and microstructures of 7075 aluminum alloy with various aging treatments. Trans Nonferr Metal Soc Chin 2008, 18:755-762.
41. Niinomi M. Mechanical properties of biomedical titanium alloys. Mater Sci Eng A 1998, 243:231-236.
42. Lee W., Su T. Mechanical properties and microstructural features of ANSI 4340 high-strength alloy steel under quenched and tempered conditions. J Mater Proc Technol 1999, 87:198-206.
43. Scarpa F., Tomlinson G. Theoretical characteristics of the vibration of sandwich plates with in-plane negative Poisson's ratio values. J Sound Vibrat 2000, 230:45-67.
44. Ashby MF. Materials selection and process in mechanical design, Butterworth-Heinermann; 1999.