In-plane stiffness and yield strength of periodic metal honeycombs

Journal of Engineering Materials and Technology

Volumn 126, Issue 2, 2004, Pages 137-156

  Wang, A J ^a   McDowell, D L ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; BENDING (DEFORMATION); BUCKLING; COMPACTION; COMPRESSIVE STRESS; ELASTIC MODULI; ELASTICITY; ERROR ANALYSIS; POISSON RATIO; STIFFNESS; STRAIN; YIELD STRESS;

DIAMOND CELLS; ELASTIC BUCKLING; KAGOME CELLS; PERIODIC METAL HONEYCOMB STRUCTURES;

HONEYCOMB STRUCTURES;

EID: 4644356885     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1646165     Document Type: Article

References (24)

1. Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., and Wadley, H. N. G., 2000, Metal Foams: A Design Guide, Butterworth-Heinemann, Boston.
2. Cochran, J., Lee, K. J., McDowell, D., Sanders, T, Church, B., Clark, J., Dempsey, B., Hayes, A., Hurysz, K., McCoy, T., Nadler, J., Oh, R., Seay, W., and Shapiro, B., 2000, "Low Density Monolithic Metal Honeycombs by Thermal Chemical Processing," Fourth Conference on Aerospace Materials, Processes and Environmental Technolog, Huntsville, Alabama, September IB20, 2000.
3. Gibson, L. J., and Ashby, M. F., 1997, Cellular Solids: Structure and Properties, 2nd ed., Cambridge University Press.
4. Kelsey, S., Gellatly, R. A., and Clark, B. W., 1958, "The Shear Modulus of Foil Honeycombs Cores," Aircraft Eng., 30, pp. 294-302.
5. Grediac, M., 1993, "A Finite Element Study of the Transverse Shear in Honeycomb Cores," Int. J. Solids Struct., 30(13), pp. 1777-1788.
6. Papka, S. D., and Kyriakides, S., 1998, "Experiments and Full-Scale Numerical Simulations of In-Plane Crushing of a Honeycombs," Acta Mater., 46(8), pp. 2765-2776.
7. Triantafyllidis, N., and Schraad, M. W., 1998, "Onset of Failure in Aluminum Honeycombs Under General In-Plane Loading," J. Mech. Phys. Solids, 46(6), pp. 1089-1124.
8. Onck, P. R., Andrews, E. W., and Gibson, L. J., 2001, "Size Effects in Ductile Cellular Solids, Part I: Modeling," Int. J. Mech. Sci., 43, pp. 681-699.
9. Andrews, E. W., Gioux, G., Onck, P., and Gibson, L. J., 2001, "Size Effects in Ductile Cellular Solids. Part II: Experimental Results," Int. J. Mech. Sci., 43, pp. 701-713.
10. Zhang, J., and Ashby, M. F., 1992, "Buckling of Honeycombs Under In-Plane Biaxial Stresses," Int. J. Mech. Sci., 34(6), pp. 491-509.
11. Gu, S., Lu, T. J., and Evans, A. G., 2001, "On the Design of Two-Dimensional Cellular Metals for Combined Heat Dissipation and Structural Load Capacity," Int. J. Heat Mass Transfer, 44, pp. 2163-2175.
12. Torquato, S., Gibiansky, L. V., Silva, M. J., and Gibson, L. J., 1998, "Effective Mechanical and Transport Properties of Cellular Solids," Int. J. Mech. Sci., 40(1), pp. 71-82.
13. Christensen, R. M., 1986, "Mechanics of Low Density Materials," J. Mech. Phys. Solids, 34(6), pp. 563-578.
14. Hunt, H. E. M., 1993, "The Mechanical Strength of Ceramic Honeycomb Monoliths as Determined by Simple Experiments," Trans IChemE, 71, Part A, pp. 257-266.
15. Santosa, S., and Wierzbicki, T., 1999, "Effect of an Ultralight Metal Filler on the Bending Collapse Behavior of Thin-Walled Prismatic Columns," Int. J. Mech. Sci., 41, pp. 995-1019.
16. Gulati S. T., 1975, "Effects of Cell Geometry on Thermal Shock Resistance of Catalytic Monoliths," Automotive Engineering Congress and Exposition, Society of Automotive Engineers, Detroit, MI.
17. Deshpande, V. S., Ashby, M. F., and Fleck, N. A., 2001, "Foam Topology Bending Versus Stretching Dominated Architectures," Acta Mater., 49, pp. 1035-1040.
18. Timoshenko, S. P., and Gere, J. M., 1961, Theory of Elastic Stahility, 2nd ed. McGraw-Hill, New York.
19. Gere, J. M., and Timoshenko, S. P., 1984, Mechanics of Materials, 2nd Ed. Wadsworth Inc.
20. Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., and Wadley, H. N. G., 2001, "The Topological Design of Multifunctional Cellular Metals," Prog. Mater. Sci., 46, pp. 309-327.
21. Syozi, I., 1951, "Statistics of Kagome Lattice," Prog. Theor. Phys., 6(3), pp. 306-308.
22. Hyun, S., and Torquato, S., 2002, "Optimal and Manufacturable Two-Dimensional, Kagome-Like Cellular Solids," J. Mater. Res., 17(1), pp. 137-144.
23. Shah, R. K., and London. A. L., 1978, Laminar Flow Forced Convection in Ducts, Academic Press. New York.
24. Lim, T. J., Smith, B., and McDowell, D. L., 2002, "Behavior of a Random Hollow Sphere Metal Foam," Acta Mater., 50(11), pp. 2867-2879.