Effect of real longitudinal surface roughness on lubrication film formation within line elastohydrodynamic contact

Tribology International

Volumn 43, Issue 12, 2010, Pages 2384-2389

  Křupka, Ivan ^a   Perka, Petr ^a   Hartl, Martin ^a   Xue Jin, Shen ^b   Xiao Yang, Chen ^b  

^a BRNO UNIVERSITY OF TECHNOLOGY   (Czech Republic)

^b SHANGHAI UNIVERSITY   (China)

Author keywords

Elastohydrodynamic lubrication; Film thickness; Line contact; Surface roughness

Indexed keywords

CIRCULAR CONTACTS; CIRCUMFERENTIAL DIRECTION; CONTACT LENGTH; DIRECTION OF MOTION; ELASTOHYDRODYNAMIC CONTACT; ELLIPTICAL CONTACT; EXPERIMENTAL STUDIES; KEY PARAMETERS; LINE CONTACT; LUBRICATION FILMS; OPTICAL TEST; PURE ROLLING; RUBBING SURFACES; SURFACE FEATURE; SURFACE FINISHING; TAPERED ROLLER;

ELASTOHYDRODYNAMICS; METAL ANALYSIS; OPTICAL TESTING; ROLLERS (MACHINE COMPONENTS); ROLLING; SHAFTS (MACHINE COMPONENTS); SURFACE PROPERTIES; SURFACE ROUGHNESS;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 77958106878     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2010.08.007     Document Type: Article

References (37)

1. L. Chang Deterministic modeling and numerical simulation of lubrication between rough surfacesa review of recent developments Wear 184 1995 155 160
2. HS. Cheng Analytical modeling of mixed lubrication performance. In boundary and mixed lubrication Science and Applications (Proceedings of the 28th Leeds-Lyon Symposium on Tribology) 2002 Elsevier Amsterdam 1933
3. AA Lubrecht, WE TenNapel, and R. Bosma The influence of longitudinal and transverse roughness on the elastohydrodynamic lubrication of circular contacts ASME J. Tribol. 110 1988 421 426
4. L Chang, C Cusano, and TF. Conry Effects of lubricant rheology and kinematic conditions on micro-elastohydrodynamic lubrication ASME J. Tribol. 111 1989 344 351
5. CH Venner, AA Lubrecht, and WE. ten Napel Numerical simulation of the overrolling of a surface feature in en EHL line contact ASME J. Tribol. 113 1991 777 783
6. L Chang, MN Webster, and A.A Jackson Line-contact Micro-EHL model with 3-dimensional Surface Topography ASME J. Tribol. 116 1 1994 21 28
7. JA Greenwood, and GE. Morales-Espejel The behavior of transverse roughness in EHL contacts Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 208 1994 121 132
8. CJ. Hooke Surface roughness modification in elastohydrodynamic line contacts operating in the elastic piezoviscous regime Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 212 1998 145 162
9. AA Lubrecht, and CH. Venner Elastohydrodynamic lubrication of rough surfaces Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 208 1995 397 404
10. XL Ai, and HS. Cheng The effects of surface texture on EHL point contacts ASME J. Tribol. 118 1996 59 66
11. D Zhu, and XL. Ai Point contact EHL based on optically measured three-dimensional rough surfaces ASME J. Tribol. 119 1997 375 384
12. YZ Hu, and D.A Zhu Full numerical solution to the mixed lubrication in point contacts ASME J. Tribol. 122 2000 1 9
13. CD Elcoate, HP Evans, TG Hughes, and RW. Snidle Transient elastohydrodynamic analysis of rough surfaces using a novel coupled differential deflection method Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 215 2001 319 337
14. GE Morales-Espejel, PM Lugt, J Van Kuilenburg, and JH. Tripp Effect of surface Micro-Geometry on the pressures and internal stresses of pure rolling EHL contact Tribol. Trans. 46 2003 260 272
15. B Jacod, CH Venner, and PM. Lugt Influence of longitudinal roughness on friction in EHL contacts ASME J. Tribol. 126 2004 476 481
16. MJA Holmes, HP Evans, and RW. Snidle Analysis of mixed lubrication effects in simulated gear tooth contacts ASME J. Tribol. 127 2005 61 69
17. CJ Hooke, KY Li, and G. Morales-Espejel Rapid calculation of the pressures and clearances in rough, rollingsliding elastohydrodynamically lubricated contacts. Part 2: general, non-sinusoidal roughness Proc. IMechE, Part C: J. Mech. Eng. Sci. 221 2007 551 564 (Pubitemid 47072785)
18. A Jackson, and A. Cameron An interferometric study of the EHL of rough surfaces ASLE Trans. 19 1975 50 60
19. LD Wedeven, and C. Cusano Elastohydrodynamic film thickness measurements of artificially produced surface dents and grooves ASLE Trans. 22 1979 369 381
20. M Kaneta, and A. Cameron Effects of asperities in elastohydrodynamic lubrication ASME J. Lubr. Technol. 102 1980 374 379
21. M. Kaneta Effects of surface roughness in elastohydrodynamic lubrication JSME Int. J. III-VIB 35 1992 535 546
22. M. Kaneta, T Sakai, and H. Nishikawa Effects of surface roughness on point contact EHL Tribol. Trans. 36 1993 605 612
23. M Kaneta, and H. Nishikawa Local reduction in thickness of point contact EHL films caused by transversally oriented moving groove and its recovery ASME J. Tribol. 116 1994 635 639
24. M Kaneta, H Nishikawa, T Kanada, and K. Matsuda Abnormal phenomena appearing in EHL contacts ASME J. Tribol. 118 1996 886 892
25. M Kaneta, and H. Nishikawa Experimental study on microelastohydrodynamic lubrication Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 213 1999 371 381
26. A Flix-Quionez, P Ehret, and JL. Summers New experimental results of a single ridge passing through an EHL conjunction ASME J. Tribol. 125 2003 252 259
27. RP Glovnea, JW Choo, AV Olver, and HA. Spikes Compression of a single transverse ridge in a circular elastohydrodynamic contact ASME J. Tribol. 125 2003 275 282
28. P Yang, J Cui, M Kaneta, and H. Nishikawa Influence of a surface bump or groove on the lubricating performance and dimple phenomena in simple sliding point EHL contacts ASME J. Tribol. 126 2004 466 472
29. M Hartl, I Krupka, V Fuis, and M. Liska Experimental study of lubricant film thickness behavior in the vicinity of real asperities passing through lubricated contact Tribol. Trans. 47 2004 376 385
30. A Felix Quinonez, P Ehret, and JL. Summers On three-dimensional flat-top defects passing through an EHL point contact: a comparison of modelling with experiments ASME J. Tribol. 127 2005 51 60
31. JW Choo, AV Olver, HA Spikes, ML Dumont, and E. Ioannides The influence of longitudinal roughness in thin-film, mixed elastohydrodynamic lubrication Tribol. Trans. 49 2006 248 259
32. JW Choo, AV Olver, and HA. Spikes The influence of transverse roughness in thin film, mixed elastohydrodynamic lubrication Tribol. Int. 40 2007 220 232
33. JW Choo, AV Olver, and HA Spikes Interaction of asperities on opposing surfaces in thin film, mixed elastohydrodynamic lubrication ASME J. Tribol. 130 2008 021505
34. G Karami, HP Evans, and RW. Snidle Elastohydrodynamic lubrication of circumferentially finished rollers having sinusoidal roughness Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 201 1987 29 36
35. M Hartl, I Křupka, R Poliuk, and M. Lika An automatic system for real-time evaluation of EHD film thickness and shape based on the colorimetric interferometry Tribol. Trans. 42 1999 303 309
36. M Hartl Thin film colorimetric interferometry Tribol. Trans. 44 2001 270 276
37. Sun HY, Chen XY. Thermal EHL analysis of cylindrical roller under heavy load. In: Proceedings of the IUTAM Symposium on Elastohydrodynamics and Micro-elastohydrodynamics. Cardiff; 2004. 10720.