Dry reforming of methane in membrane reactors using Pd and Pd-Ag composite membranes on a NaA zeolite modified porous stainless steel support

Journal of Membrane Science

Volumn 364, Issue 1-2, 2010, Pages 17-26

  Bosko, M L ^a   Munera J F ^a   Lombardo, E A ^a   Cornaglia, L M ^a  

^a INSTITUTO DE INVESTIGACIONES EN CATÁLISIS Y PETROQUÍMICA   (Argentina)

Author keywords

Membrane reactor; Methane dry reforming; NaA zeolite

Indexed keywords

ALLOY FILM; CRYSTALLINE STRUCTURE; DIP COATING; DRY REFORMING-OF-METHANE; HIGH PURITY; MEMBRANE REACTOR; METAL FILM; METHANE CONVERSIONS; METHANE DRY REFORMING; NAA ZEOLITES; PD MEMBRANE; PD-AG ALLOYS; PERMEATION FLUXES; POROUS STAINLESS STEEL; REACTION CONDITIONS; SEM; TYPICAL MORPHOLOGY;

BIOREACTORS; CATALYST ACTIVITY; COMPOSITE MEMBRANES; CRYSTALLINE MATERIALS; ELECTROLESS PLATING; HYDROTHERMAL SYNTHESIS; METALLIC FILMS; METHANE; PALLADIUM; REFORMING REACTIONS; SCANNING ELECTRON MICROSCOPY; SILVER; SILVER ALLOYS; STAINLESS STEEL; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS; X RAY PHOTOELECTRON SPECTROSCOPY; X RAYS;

PERMEATION;

HYDROGEN; METHANE; PALLADIUM; SILVER; STAINLESS STEEL; ZEOLITE;

ARTICLE; MEMBRANE PERMEABILITY; MEMBRANE REACTOR; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; X RAY DIFFRACTION; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 77957946222     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2010.07.039     Document Type: Article

References (33)

1. Lu G.Q., Diniz da Costa J.C., Duke M., Giessler S., Socolow R., Williams R.H., Kreutz T. Inorganic membranes for hydrogen production and purification: a critical review and perspective. J. Colloid Interface Sci. 2007, 314:589-603.
2. 2 reforming of methane in a hydrogen-permselective membrane reactor. Stud. Surf. Sci. Catal. 1997, 107:547-553.
3. Ferreira-Aparicio P., Benito M., Menad S. Catalysis in membrane reformers: a high-performance catalytic system for hydrogen production from methane. J. Catal. 2005, 231:331-343.
4. Múnera J.F., Coronel L., Faroldi B., Carrara C., Lombardo E.A., Cornaglia L.M. Production of ultrapure hydrogen in a Pd-Ag membrane reactor using noble metal supported on La-based oxides. Modeling for the dry reforming of methane reaction. Asia-Pac. J. Chem. Eng. 2010, 5:35-47.
5. 2 at high pressure. Top. Catal. 2004, 29:45-57.
6. Irusta S., Múnera J., Carrara C., Lombardo E.A., Cornaglia L.M. A stable, novel catalyst improves hydrogen production in a membrane reactor. Appl. Catal. A 2005, 287:147-158.
7. 3 catalysis. Appl. Catal. A 2007, 319:38-46.
8. Nam S.-E., Lee K.-H. Preparation and characterization of palladium alloy composite membranes with a diffusion barrier for hydrogen separation. Ind. Eng. Chem. Res. 2005, 44:100-105.
9. Paglieri S.N., Foo K.Y., Way J.D., Collins J.P., Harper-Nixon L. A new preparation technique for Pd/Alumina membranes with enhanced high-temperature stability. Ind. Eng. Chem. Res. 1999, 38:1925-1936.
10. 3 composite membrane. J. Membr. Sci. 2009, 326:681-687.
11. 2-modified porous stainless steel for a high-hydrogen-flux membrane. Ind. Eng. Chem. Res. 2005, 44:3053-3058.
12. Bhandari R., Ma Y.H. Pd-Ag membrane synthesis: the electroless and electro-plating conditions and their effect on the deposits morphology. J. Membr. Sci. 2009, 334:50-63.
13. Tong J., Kashima Y., Shirai R., Suda H., Matsumura Y. Thin defect-free Pd membrane deposited on asymmetric porous stainless steel substrate. Ind. Eng. Chem. Res. 2005, 44:8025-8032.
14. Yepes D., Cornaglia L.M., Irusta S., Lombardo E.A. Different oxides uses as diffusion barriers in composite hydrogen permeable membranes. J. Membr. Sci. 2006, 274:92-101.
15. Huang Y., Dittmeyer R. Preparation and characterization of composite palladium membranes on sinter-metal supports with a ceramic barrier against intermetallic diffusion. J. Membr. Sci. 2006, 282:296-310.
16. Guazzone F., Engwall E.E., Ma Y.H. Effects of surface activity, defects and mass transfer on hydrogen permeance and n-value in composite palladium-porous stainless steel membranes. Catal. Today 2006, 118:24-31.
17. Mardilovich P.P., She Y., Ma Y.H., Rei M. Defect-free palladium membranes on porous stainless-steel support. AIChE J. 1998, 44:310-322.
18. F. Guazzone, Ph.D. Thesis in Chemical Engineering, Engineering of Substrate Surface for the Synthesis of Ultra-thin Composite Pd and Pd-Cu Membranes for H2 Separation, Worcester Polytechnic Institute (2005).
19. Bosko M.L., Ojeda F., Lombardo E.A., Cornaglia L.M. NaA zeolite as an effective diffusion barrier in composite Pd/PSS membranes. J. Membr. Sci. 2009, 331:57-65.
20. Mejdell A.L., Jondahl M., Peters T.A., Bredesen R., Venvik H.J. Experimental investigation of a microchannel membrane configuration with a 1.4μm Pd/Ag23wt.% membrane-effects of flow and pressure. J. Membr. Sci. 2009, 327:6-10.
21. Samingprai S., Tantayanon S., Ma Y.H. Chromium oxide intermetallic diffusion barrier for palladium membrane supported on porous stainless steel. J. Membr. Sci. 2009, 347:8-16.
22. Zhang K., Gao H., Rui Z., Liu P., Li Y., Lin Y.S. High-temperature stability of palladium membranes on porous metal supports with different intermediate layers. Ind. Eng. Chem. Res. 2009, 48:1880-1886.
23. Arstad B., Venvik H., Klette H., Walmsley J.C., Tucho W.M., Holmestad R., Holmen A., Bredesen R. Studies of self-supported 1.6mm Pd/23wt.% Ag membranes during and after hydrogen production in a catalytic membrane reactor. Catal. Today 2006, 118:63-72.
24. Oyama S.T., Lim H. An operability level coefficient (OLC) as a useful tool for correlating the performance of membrane reactors. Chem. Eng. J. 2009, 151:351-358.
25. U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Table 3.1.7, April 2009.
26. U.S. Department of Energy, Office of Fossil Energy, Table 9. Hydrogen Separation Technical Target, September 2009.
27. Nuñez C.J., Utrilla M.V., Ureña A. Effect of temperature on sintered austeno-ferritic stainless steel microstructure. J. Alloys Compd. 2008, 463:552-558.
28. Ayturk M.E., Engwall E.E., Ma Y.H. Microstructure analysis of the intermetallic diffusion-induced alloy phases in composite Pd/Ag/porous stainless steel membranes. Ind. Eng. Chem. Res. 2007, 46:4295-4306.
29. Engin Ayturk M., Payzant E.A., Speakman S.A., Ma Y.H. Isothermal nucleation and growth kinetics of Pd/Ag alloy phase via in situ time-resolved high-temperature X-ray diffraction (HTXRD) analysis. J. Membr. Sci. 2008, 316:97-111.
30. Keuler J.N., Lorenzen L., Sanderson R.D., Prozesky V., Przybylowicz W.J. Characterization of electroless plated palladium-silver alloy membranes. Thin Solid Films 1999, 347:91-98.
31. Brun M., Berthet A., Bertolini J.C. XPS, AES and Auger parameter of Pd and PdO. J. Electron. Spectrosc. Relat. Phenom. 1999, 104:55-60.
32. Ptacek P., Bastl Z. XPS characterization of supported bimetallic palladium-silver clusters. Appl. Surf. Sci. 1990, 45:319-323.
33. Miller J.B., Matranga C., Gellman A.J. Surface segregation in a polycrystalline Pd70Cu30 alloy hydrogen purification membrane. Surf. Sci. 2008, 602:375-382.