Investigation of the tribological behavior of polytetrafluoroethylene at cryogenic temperatures

Tribology Transactions

Volumn 51, Issue 1, 2008, Pages 92-100

  Burris, D L ^a  

^a UNIVERSITY OF FLORIDA   (United States)

Author keywords

Cryogenic; Friction; PTFE: Space; Seals; Solid Lubrication; Thermal Activation

Indexed keywords

EID: 77957749713     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402000701660618     Document Type: Article

References (45)

1. Gardos, M.N. (1982), “Self-Lubricating Composites for Extreme Environment Applications,” Tribology International, 15, 5, pp 273-283.
2. Miyoshi, K. (1999), “Considerations in Vacuum Tribology (Adhesion, Friction, Wear, and Solid Lubrication in Vacuum),” Tribology International, 32, 11, pp 605-616.
3. Zhao, X., et al. (2005), “An Experimental Study of Low Earth Orbit Atomic Oxygen and Ultraviolet Radiation Effects on a Spacecraft Material-Polytetrafluoroethylene,” PolymerDegradation and Stability, 88, 2, pp 275-285.
4. Miyoshi, K. (1999), “Aerospace Mechanisms and Tribology Technology-Case Study,” Tribology International, 32, 11, pp 673-685.
5. Pooley, C.M. and Tabor, D. (1972), “Friction and Molecular Structure-Behavior of Some Thermoplastics,” Proceedings of the Royal Society of London Series a-Mathematical and Physical Sciences, 329, 1578, pp 251.
6. McLaren, K. and Tabor, D. (1963), “Visco-Elastic Properties and Friction of Solids-Friction of Polymers-Influence of Speed and Temperature,”Nature, 197, 487, pp 856.
7. Blanchet, T. and Kennedy, F. (1992), “Sliding Wear Mechanism of Polyte-trafluoroethylene (PTFE) andPTFE Composites,” Wear, 153, 1, pp 229-243.
8. Makinson, K. and Tabor, D. (1964), “Friction and Transfer of Polytetrafluoroethylene,” Nature, 201, 491, pp 464.
9. Pleskachevsky, Y.M. and Smurugov, V.A. (1997), “Thermal Fluctuations of PTFE Friction and Transfer,” Wear, 209, 1-2, pp 123-127.
10. Smurugov, V., et al. (1992), “On PTFE Transfer and Thermoactivation Mechanism of Wear,” Wear, 158, 1-2, pp 61-69.
11. Steijn, R. (1968), “Sliding Experiments with Polytetrafluoroethylene,” ASLE Transactions, 11, 3, pp 235.
12. Tanaka, K., Uchiyama, Y. and Toyooka, S. (1973), “Mechanism of Wear of Poytetrafluoroethylene,” Wear, 23, 2, pp 153-172.
13. Gradt, T., et al. (1998), “Friction and Wear at Low Temperatures,” International Journal ofHydrogen Energy, 23, 5, pp 397-403.
14. Hubner, W., et al. (1998), “Tribological Behaviour of Materials at Cryogenic Temperatures,” Wear, 216, 2, pp 150-159.
15. Michael, P., Rabinowicz, E. and Iwasa, Y. (1991), “Friction and Wear of Polymeric Materials at 293-K, 77-K and 4.2-K,” Cryogenics, 31, 8, pp 695-704.
16. Ostrovskaya, Y., etal. (2001), “Low Temperature Tribology at the B. Verkin Institute for Low Temperature Physics and Engineering (Historical Review),” Tribology International 34, 4, pp 265-276.
17. Theiler, G., et al. (2002), “Friction and Wear of PTFE Composites at Cryogenic Temperatures,” Tribology International 35, 7, pp 449-458.
18. Bowden, F.P. (1953), “Friction on Snow and Ice,” Proceedings ofthe Royal Society of London Series a-Mathematical and Physical Sciences, 217, 1131, pp 462-478.
19. McCook, N.L., et al. (2005), “Cryogenic Friction Behavior of PTFE Based Solid Lubricant Composites,” Tribology Letters, 20, 2, pp 109-113.
20. Sawyer, W.G., et al. (2003), “A Study on the Friction and Wear Behavior of PTFE Filled with Alumina Nanoparticles,” Wear, 254, 5-6, pp 573-580.
21. Burris, D.L. and Sawyer, W.G. (2005), “Tribological Sensitivity of PTFE/Alumina Nanocomposites to a Range of Traditional Surface Finishes,” Tribology Transactions, 48, 2, pp 147-153.
22. Schmitz, T., etal. (2005), “The Difficulty of Measuring Low Friction: Uncertainty Analysis for Friction Coefficient Measurements,” Tribology Transactions, 127, 3, pp 673-678.
23. Burris, D. and Sawyer, W. (2007), “Tribological Behavior of PEEK Components with Compositionally Graded PEEK/PTFE Surfaces,” Wear, 262, 1-2, pp 220-224.
24. Goff, J.A. and Gratch, S. (1946), “Low-Pressure Properties of Water from-160 to 2120F,” Transactions ofthe American Society of Heating and Ventilation Engineers, 52, 95-122.
25. Kennedy, F.E., Frusescu, D. and Li, J.Y. (1997), “Thin Film Thermocouple Arrays for Sliding Surface Temperature Measurement,” Wear, 207, 1-2, pp 46-54.
26. Burris, D.L., Perry, S.S. and Sawyer, W.G. (2007), “Macroscopic Evidence of Thermally Activated Friction with Polytetrafluoroethylene” Tribology Letters, 27, pp 323-328.
27. Breiby, D., et al. (2005), “Structural Surprises in Friction-Deposited Films of Poly(tetrafluoroethylene),” Macromolecules, 38, 6, pp 2383-2390.
28. Brown, E., et al. (2006), “The Effect of Crystallinity on the Fracture of Polytetrafluoroethylene (PTFE),” Material Science and Engineering C-Biomimetic and Supramolecular Systems, 26, 8, pp 1338-1343.
29. Clark, E. (2006), “The Crystal Structure of Polytetrafluoroethylene, Forms I and IV,” Journal of Macromolecular Science Part B-Physics, 45, 2, pp 201-213.
30. Yamamoto, T. and Hara, T. (1982), “X-Ray-Diffraction Study of Crystal Transformation and Molecular Disorder in Poly(tetrafluoroethylene),” Polymer, 23, 4, pp 521-528.
31. Bunn, C., Cobbold, A. and Palmer, R. (1958), “The Fine Structure of Polytetrafluoroethylene,” Journal ofPolymer Science, 28, 117, pp 365-376.
32. Bunn, C. and Howells, E. (1954), “Structures of Molecules and Crystals of Fluorocarbons,” Nature, 174, 4429, pp 549-551.
33. Clark, E. (1999), “The Molecular Conformations of Polytetrafluoroethy-lene: Forms II and IV,” Polymer, 40, 16, pp 4659-4665.
34. Farmer, B. and Eby, R. (1981), “Energy Calculations of the Crystal-Structure of the Low-Temperature Phase (II) of Polytetrafluoroethylene,” Polymer, 22, 11, pp 1487-1495.
35. Kimmig, M., Strobl, G. and Stuhn, B. (1994), “Chain Reorientation in Poly(tetrafluoroethylene) by Mobile Twin-Helix Reversal Defects,” Macromolecules, 27, 9, pp 2481-2495.
36. Weeks, J., Clark, E. and Eby, R. (1981), “Crystal-Strcture of the Low-Temperature Phase(II) of Polytetrafluoroethylene,” Polymer, 22, 11, pp 1480-1486.
37. Weeks, J., Eby, R. and Clark, E. (1981), “Disorder in the Crystal-Structures of Phase-1 and Phase-2 of Copolymers of Tetrafluoroethylene and Hexaflu-oropropylene,” Polymer, 22, 11, pp 1496-1499.
38. Brown, E.N. and Dattelbaum, D.M. (2005), “The Role of Crystalline Phase on Fracture and Microstructure Evolution of Polytetrafluoroethy-lene (PTFE),” Polymer, 46, 9, pp 3056-3068.
39. Flom, D. and Porile, N. (1955), “Friction of Teflon Sliding on Teflon,” Journal ofApplied Physics, 26, 9, pp 1088-1092.
40. Blanchet, T.A. and Sawyer, W.G. (2001), “Differential Application of Wear Models to Fractional Thin Films,” Wear, 250, pp 1003-1008.
41. Dickrell, P.L., Sawyer, W.G. and Erdemir, A. (2004), “Fractional Coverage Model for the Adsorption and Removal of Gas Species and Application to Superlow Friction Diamond-Like Carbon,” Journal of Tribology-Transactions ofthe Asme, 126, 3, pp 615-619.
42. Joyce, J. (2003), “Fracture Toughness Evaluation of Polytetrafluoroethy-lene,” Polymer Engineering and Science, 43, 10, pp 1702-1714.
43. Durrell, W.S., Stump, E.C. and Schuman, P.D. (1965), “Glass Transition Temperature of Polytetrafluoroethylene,” Journal of Polymer Science Part B-Polymer Letters, 3, 10, pp 831.
44. Lau, S.F., Wesson, J.P and Wunderlich, B. (1984), “Glass-Transition of Poly(Tetrafluoroethylene),” Macromolecules, 17, 5, pp 1102-1104.
45. Dlubek, G., Saarinen, K. and Fretwell, H.M. (1998), “The Temperature Dependence of the Local Free Volume in Polyethylene and Polytetraflu-oroethylene: A Positron Lifetime Study,” Journal of Polymer Science Part B-PolymerPhysics, 36, 9, pp 1513-1528.