Material characterization based on instrumented and simulated indentation tests

International Journal of Applied Mechanics

Volumn 1, Issue 1, 2009, Pages 61-84

  Liu, Zishun ^a   Harsono, Edy ^b   Swaddiwudhipong, Somsak ^b  

^a INSTITUTE OF HIGH PERFORMANCE COMPUTING   (Singapore)

^b NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

finite element; Indentation test; mechanical property; reverse analysis; uniqueness

Indexed keywords

DIMENSIONLESS ANALYSIS; FINITE ELEMENT; HIGHER ORDER FUNCTIONS; INDENTATION CURVE; INDENTATION TEST; INPUT DATAS; INSTRUMENTED INDENTATION; LOAD-DISPLACEMENT CURVE; LOAD-DISPLACEMENT DATA; MATERIAL CHARACTERIZATIONS; MATERIAL PROPERTY; NEURAL NETWORK MODEL; REVERSE ANALYSIS; SIMULATED INDENTATION TEST; SIZE EFFECTS; SPHERICAL INDENTATIONS; UNIQUENESS; UNIVERSAL RELATIONSHIP;

ALGORITHMS; FINITE ELEMENT METHOD; MATERIALS PROPERTIES; MECHANICAL PROPERTIES; TESTING;

NEURAL NETWORKS;

EID: 77957652704     PISSN: 17588251     EISSN: 1758826X     Source Type: Journal    
DOI: 10.1142/S175882510900006X     Document Type: Article

References (72)

1. Alcala, J., Barone, A. C. and Anglada, M. [2000] "The influence of plastic hardening on surface deformation modes around Vickers and spherical indents," Acta Mater 48(13), 3451-3464.
2. Alkorta, J., Martinez-Esnaola, J. M. and Sevillano, J. G. [2005] "Absence of one-to-one correspondence between elastoplastic properties and sharp-indentation load-penetration data," J. Mater. Res. 20(2), 432-437. (Pubitemid 41683265)
3. Atkins, A. G. and Tabor, D. [1965] "Plastic indentation in metals with cones," J. Mech. Phys. Solid 13, 149-164.
4. Bucaille, J. L., Stauss, S., Felder, E. and Michler, J. [2003] "Determination of plastic properties of metals by instrumented indentation using different sharp indenters," Acta Mater 51(4), 1663-1678.
5. Cai, X. [1993] "Effect of friction in indentation Hardness testing-A finite element study," J. Mater. Sci. Lett. 12(3), 301-303.
6. Cao, Y. and Huber, N. [2006] "Further investigation on the definition of the representative strain in conical indentation," J. Mater. Res. 21(5), 1810-1821. (Pubitemid 44256202)
7. Cao, Y., Qian, X. and Huber, N. [2007] "Spherical indentation into elastoplastic materials: Indentation-response based definitions of the representative strain," Mater. Sci. Eng. 454-455, 1-13. (Pubitemid 46404727)
8. Cao, Y. P. and Lu, J. [2004] "A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve," Acta Mater 52(13), 4023-4032.
9. Cao, Y. P., Qian, X. Q., Lu, J. and Yao, Z. H. [2005] "An energy-based method to extract plastic properties of metal materials from conical indentation tests," J. Mater. Res. 20(3), 1194-1206. (Pubitemid 41787059)
10. Capehart, T. W. and Cheng, Y. T. [2003] "Determining constitutive models from conical indentation: Sensitivity analysis," 18(4), 827-832.
11. Casals, O. and Alcala, J. [2007] "Analytical and experimental resolutions in the duality of mechanical property extractions from instrumented indentation experiments: Comments on "On determination of material parameters from loading and unloading responses in nanoindentation with a single sharp indenter" by L. Wang and S.I. Rokhlin [J. Mater. Res. 21 (2006) 995]," J. Mater. Res. 22(3), 1138-1144. (Pubitemid 46901928)
12. Chen, S. H., Tao, C. J. and Wang, T. C. [2004] "A study of size-dependent microindenta-tion," Acta M ech. 167(1-2), 57-71.
13. Chen, X., Zhao, M., Ogasawara, N. and Chiba, N. [2006] "A new approach to measure the elastic-plastic properties of bulk materials using spherical indentation," Acta Mater. 54(1), 23-32. (Pubitemid 41587896)
14. Chen, X., Ogasawara, N., Zhao, M. and Chiba, N. [2007] "On the uniqueness of measuring elastoplastic properties from indentation: the indistinguishable mystical materials," J. Mech. Phys. Solid 55(6), 1618-1660. (Pubitemid 46978407)
15. Cheng, Y. T. and Cheng, C. M. [1998a] "Scaling approach to conical indentation in elastic-plastic solids with work hardening," J. Appl. Phys. 84(3), 1284-1291.
16. Cheng, Y. T. and Cheng, C. M. [1998b] "Relationships between hardness, elastic modulus, and the work of indentation," Applied Phys. Lett. 73(3), 614-616.
17. Cheng, Y. T. and Cheng, C. M. [1999a] "Can stress-strain relationships be obtained from indentation curves using conical and pyramidal indenters?," J. Mater. Res. 14(7), 3493-3496.
18. Cheng, Y. T. and Cheng, C. M. [1999b] "Scaling relationships in conical indentation of elastic-perfectly plastic solids," Int. J. Solid Struct. 36(6), 1231-1243.
19. Chollacoop, N., Dao, M. and Suresh, S. [2003] "Depth-sensing instrumented indentation with dual sharp indenters," Acta Mater. 51(13), 3713-3729.
20. Dao, M., Chollacoop, N., Van Vliet, K. J., Venkatesh, T. A. and Suresh, S. [2001] "Computational modeling of the forward and reverse problems in instrumented sharp indentation," Acta Mater. 49(19), 3899-3918. (Pubitemid 33018768)
21. DiCarlo, A., Yang, H. T. Y. and Chandrasekar, S. [2004] "Prediction of stress-strain relation using cone indentation: Effect of friction," Int. J. Numer. Methods Eng. 60(3), 661-674. (Pubitemid 38688266)
22. Doerner, M. F. and Nix, W. D. [1986] "A method for interpreting the data from depth-sensing indentation instruments," J. Mater. Res. 1(4), 601-609.
23. Fleck, N. A., Muller, G. M., Ashby, M. F. and Hutchinson, J. W. [1994] "Strain gradient plasticity: theory and experiment," Acta Metall. Mater. 42(2), 475-487.
24. Gao, H., Huang, Y., Nix, W. D. and Hutchinson, J. W. [1999] "Mechanism-based strain gradient plasticity-I. Theory," J. Mech. Phys. Solid 47(4), 1239-1263.
25. Gao, H. and Huang, Y. [2001] "Taylor-based nonlocal theory of plasticity," Int. J. Solid Struct. 38(15), 2615-2637. (Pubitemid 32329434)
26. Giannakopoulos, A. E., Larsson, P. L. and Vestergaard, R. [1994] "Analysis of Vickers indentation," Int. J. Solid Struct. 31(19), 2679-2708.
27. Giannakopoulos, A. E. and Larsson, P. L. [1997] "Analysis of pyramid indentation of pressure-sensitive hard metals and ceramics," Mech. Mater. 25(1), 1-35. (Pubitemid 127382381)
28. Giannakopoulos, A. E. and Suresh, S. [1999] "Determination of elastoplastic properties by instrumented sharp indentation," Scripta Mater. 40(8), 1191-1198.
29. Haj-Ali, R., Hoan-Kee, K., Sau Wee, K., Saxena, A. and Rao, T. [2008] "Nonlinear constitutive models from nanoindentation tests using artificial neural networks," Int. J. Plast. 24(3), 371-396. (Pubitemid 350251670)
30. Harsono, E. and Swaddiwudhipong, S. [2008] "Neural network model to extract the elasto-plastic properties from spherical indentation curves," The 4th International Conference on Advances in Structural Engineering and Mechanics, Jeju, Korea, pp. 425-434.
31. Harsono, E., Swaddiwudhipong, S. and Liu, Z. S. [2008] "The effect of friction on indentation test results," Model. Simulat. Mater. Sci. Eng. 16(4), 065001.
32. Hong, W., Zhao, X., Zhou, J. and Suo, Z. [2008] "A theory of coupled diffusion and large deformation in polymeric gels," J. Mech. Phys. Solid 56(3), 1779-1793.
33. Huang, W. M., Su, J. F., Hong, M. H. and Yang, B. [2005] "Pile-up and sink-in in micro-indentation of a NiTi shape-memory alloy," Scripta Mater. 53(7), 1055-1057. (Pubitemid 41162526)
34. Huang, Y., Gao, H., Nix, W. D. and Hutchinson, J. W. [2000] "Mechanism-based strain gradient plasticity-II. Analysis," J. Mech. Phys. Solid 48(1), 99-128.
35. Huber, N. and Tsakmakis, C. [1999] "Determination of constitutive properties from spherical indentation data using neural networks. I. The case of pure kinematic hardening in plasticity laws," J. Mech. Phys. Solid 47(5), 1569-1588.
36. Huber, N., Tsagrakis, I. and Tsakamakis, C. [2000] "Determination of constitutive properties of thin metallic films on substrates by spherical indentation using neural networks," Int. J. Solid Struct. 37(44), 6499-6516.
37. Huber, N. and Tioulioukovski, E. [2002] "Smart indentation methods: The application of neural networks," VDI Berichte (1685), 99-104.
38. Larsson, P. L., Giannakopoulos, A. E., Soderlund, E., Rowcliffe, D. J. and Vestergaard, R. [1996] "Analysis of Berkovich indentation," Int. J. Solid Struct. 33(2), 221-248. (Pubitemid 126398806)
39. Liu, Z. S., Swaddiwudhipong, S. and Pei, Q. X. [2008] "Simulations of micro and nanoin-dentations," J. Mech. Mater. Struct. 3(8), 1847-1856.
40. Ma, Q. and Clarke, D. R. [1995] "Size dependent hardness of silver single crystals," J. Mater. Res. 10(4), 853-863.
41. Martin, M. and Troyon, M. [2002] "Fundamental relations used in nanoindentation: critical examination based on experimental measurements," J. Mater. Res. 17(7), 2227-2234. (Pubitemid 35236740)
42. Mata, M. and Alcala, J. [2004] "The role of friction on sharp indentation," J. Mech. Phys. Solid 52(1), 145-165.
43. McCulloch, W. S. and Pitss, W. [1943] "A logical calculus of the ideas immanent in nervous activity," Bull. Math. Biophys. 5, 115-133.
44. McElhaney, K. W., Vlassak, J. J. and Nix, W. D. [1998] "Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments," J. Mater. Res. 13(3), 1300-1306. (Pubitemid 128563283)
45. Muliana, A., Steward, R., Haj-Ali, R. M. and Saxena, A. [2002] "Artificial neural network and finite element modeling of nanoindentation tests," Metall. Mater. Trans. A 33(5), 1939-1947.
46. Nix, W. D. [1989] "Mechanical properties of thin films," Metallurgical Transaction A 20(9), 2217-2245.
47. Ogasawara, N., Chiba, N. and Chen, X. [2005] "Representative strain of indentation analysis," J. Mater. Res. 20(6), 2225-2234. (Pubitemid 41763327)
48. Ogasawara, N., Chiba, N. and Chen, X. [2006] "Limit analysis-based approach to determine the material plastic properties with conical indentation," J. Mater. Res. 21(4), 947-957. (Pubitemid 43805182)
49. Oliver, W. C. and Pharr, G. M. [1992] "An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments," J. Mater. Res. 7(4), 1564-1583.
50. Sneddon, I. N. [1965] "The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile," Int. J. Eng. Sci. 3, 47-57.
51. Stolken, J. S. and Evans, A. G. [1998] "Microbend test method for measuring the plasticity length scale," Acta Mater. 46(14), 5109-5115. (Pubitemid 128421651)
52. Swaddiwudhipong, S., Hua, J., Tho, K. K. and Liu, Z. S. [2005a] "C0 solid elements for materials with strain gradient effects," Int. J. Numer. Methods Eng. 64(8), 1400-1414. (Pubitemid 41569110)
53. Swaddiwudhipong, S., Poh, L. H., Hua, J., Liu, Z. S. and Tho, K. K. [2005b] "Modeling nano-indentation tests of glassy polymers using finite elements with strain gradient plasticity," Materials Science and Engineering: A 404(1-2), 179-187. (Pubitemid 41179313)
54. Swaddiwudhipong, S., Tho, K. K., Liu, Z. S., Hua, J. and Ooi, N. S. B. [2005c] "Material characterization via least squares support vector machines," Model. Simulat. Mater. Sci. Eng. 13(4), 993-1004. (Pubitemid 41260322)
55. Swaddiwudhipong, S., Tho, K. K., Liu, Z. S. and Zeng, K. [2005d] "Material characterization based on dual indenters," Int. J. Solid Struct. 42(1), 69-83.
56. Swaddiwudhipong, S., Hua, J., Harsono, E., Liu, Z. S. and Ooi, N. S. B. [2006a] "Improved algorithm for material characterization by simulated indentation tests," Model. Simulat. Mater. Sci. Eng. 14(6), 1347-1362. (Pubitemid 46069556)
57. Swaddiwudhipong, S., Hua, J., Tho, K. K. and Liu, Z. S. [2006b] "Equivalency of Berkovich and conical load-indentation curves," Model. Simulat. Mater. Sci. Eng. 14(1), 71-82. (Pubitemid 43099604)
58. Swaddiwudhipong, S., Hua, J., Tho, K. K. and Liu, Z. S. [2006c] "Finite element modelling for materials with size effect," Model. Simulat. Mater. Sci. Eng. 14(5), 1127-1137. (Pubitemid 44500512)
59. Swaddiwudhipong, S., Tho, K. K., Hua, J. and Liu, Z. S. [2006d] "Mechanism-based strain gradient plasticity in C0 axisymmetric element," Int. J. Solid Struct. 43(3), 1117-1130. (Pubitemid 41828247)
60. Swaddiwudhipong, S., Harsono, E., Hua, J. and Liu, Z. S. [2008a] "Reverse analysis via efficient artificial neural networks based on simulated Berkovich indentation considering effects of friction," Eng. Comput. 24(2), 127-134.
61. Swaddiwudhipong, S., Harsono, E. and Liu, Z. S. [2008b] "Comparative study of reverse algorithms via artificial neural networks based on simulated indentation tests," Tshinghua Sci. Tech. 13(S1), 393-399.
62. Tabor, D. [1948] "A simple theory of static and dynamic hardness," Proc. Roy. Soc. A 192(1029), 247-274.
63. Tabor, D. [1951] The Hardness of Metals (Clarendon Press Oxford, US).
64. Tho, K. K., Swaddiwudhipong, S., Liu, Z. S. and Hua, J. [2004a] "Artificial neural network model for material characterization by indentation," Model. Simulat. Mater. Sci. Eng. 12(3), 1055-1062.
65. Tho, K. K., Swaddiwudhipong, S., Liu, Z. S., Zeng, K. and Hua, J. [2004b] "Uniqueness of reverse analysis from conical indentation tests," J. Mater. Res. 19(6), 2498-2502.
66. Tho, K. K., Swaddiwudhipong, S., Liu, Z. S. and Zeng, K. [2005] "Simulation of instrumented indentation and material characterization, " Mater. Sci. Eng. 390(1-2), 202-209. (Pubitemid 40014598)
67. Tho, K. K., Swaddiwudhipong, S., Hua, J. and Liu, Z. S. [2006] "Numerical simulation of indentation with size effect," Mater. Sci. Eng. 421(1-2), 268-275.
68. Venkatesh, T. A., Van Vliet, K. J., Giannakopoulos, A. E. and Suresh, S. [2000] "Determination of elasto-plastic properties by instrumented sharp indentation: guidelines for property extraction," Scripta Mater. 42(7), 833-839.
69. Zeng, K. and Chiu, C. H. [2001] "An analysis of load-penetration curves from instrumented indentation," Acta Mater 49(17), 3539-3551. (Pubitemid 32842099)
70. Zhao, M., Chen, X., Ogasawara, N., Razvan, A. C., Chiba, N., Lee, D. and Gan, Y. X. [2006a] "New sharp indentation method of measuring the elastic-plastic properties of compliant and soft materials using the substrate effect," J. Mater. Res. 21(12), 3134-3151. (Pubitemid 46117183)
71. Zhao, M., Ogasawara, N., Chiba, N. and Chen, X. [2006b] "A new approach to measure the elastic-plastic properties of bulk materials using spherical indentation," Acta Mater. 54(1), 23-32. (Pubitemid 41587896)
72. Zhao, M., Chen, X., Xiang, Y., Vlassak, J. J., Lee, D., Ogasawara, N., Chiba, N. and Gan, Y. X. [2007] "Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation," Acta Mater. 55(18), 6260-6274. (Pubitemid 47554538)