Comparative study on the performance of tubular and button cells with YSZ membrane fabricated by a refined particle suspension coating technique

International Journal of Hydrogen Energy

Volumn 35, Issue 19, 2010, Pages 10489-10494

  Liu, Mingfei ^a   Gao, Jianfeng ^a   Dong, Dehua ^a   Liu, Xingqin ^a   Meng, Guangyao ^a  

^a UNIVERSITY OF SCIENCE AND TECHNOLOGY OF CHINA   (China)

Author keywords

Coating; Performance; SOFC; Tubular and button cell; YSZ film

Indexed keywords

AC IMPEDANCE MEASUREMENT; AC-IMPEDANCE; ANODE-SUPPORT; COMPARATIVE STUDIES; CURRENT VOLTAGE; OHMIC LOSS; OHMIC RESISTANCE; OPERATING TEMPERATURE; PARTICLE SUSPENSIONS; PEAK POWER DENSITIES; PERFORMANCE; SOFC; TUBULAR AND BUTTON CELL; TUBULAR CELLS; YSZ ELECTROLYTES; YSZ FILMS;

COATINGS; ELECTRIC IMPEDANCE; OHMIC CONTACTS; REFINING; SOLID OXIDE FUEL CELLS (SOFC);

SUSPENSIONS (FLUIDS);

EID: 77957279272     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2010.07.114     Document Type: Article

References (23)

1. N.M. Sammes, and Y.H. Du Fabrication and characterization of tubular solid oxide fuel cells Int J Appl Ceram Tec 4 2007 89 102
2. L. Yang, S.Z. Wang, K. Blinn, M.F. Liu, Z. Liu, and Z. Cheng Tolerance of a mixed ion conductor for SOFCs:BaZr0.1Ce0.7Y0.2-xYbxO3-delta Science 326 2009 126 129
3. L. Yang, C.D. Zuo, S.Z. Wang, Z. Cheng, and M.L. Liu A novel composite cathode for low-temperature SOFCs based on oxide proton conductors Adv Mater 20 2008 3280
4. L. Blum, W.A. Meulenberg, H. Nabielek, and R. Steinberger-Wilckens Worldwide SOFC technology overview and benchmark Int J Appl Ceram Tec 2 2005 482 492
5. Z. Ogumi, Y. Uchimoto, Y. Tsuji, and Z. Takehara Preparation of thin yttria-stabilized zirconia films by vapor-phase electrolytic deposition Solid State Ionics 58 1992 345 350
6. K.W. Chour, J. Chen, and R. Xu Metal-organic vapor deposition of YSZ electrolyte layers for solid oxide fuel cell applications Thin Solid Films 304 1997 106 112
7. M.F. Liu, Y.Z. Jiang, J.F. Gao, Y.Y. Wang, and G.Y. Meng Synthesis of YSZ film by solid single source PE-MOCVD method and characterization Chem J Chin Universities-Chinese 26 2005 1981 1985
8. R.Q. Yan, D. Ding, B. Lin, M.F. Liu, G.Y. Meng, and X.Q. Liu Thin yttria-stabilized zirconia electrolyte and transition layers fabricated by particle suspension spray J Power Sources 164 2007 567 571
9. X.L. Zhou, K.N. Sun, J. Gao, S.R. Le, N.Q. Zhang, and P. Wang Microstructure and electrochemical characterization of solid oxide fuel cells fabricated by co-tape casting J Power Sources 191 2009 528 533
10. P. Timakul, S. Jinawath, and P. Aungkavattana Fabrication of electrolyte materials for solid oxide fuel cells by tape-casting Ceram Int 34 2008 867 871
11. P. Von Dollen, and S. Barnett A study of screen printed yttria-stabilized zirconia layers for solid oxide fuel cells J Am Ceram Soc 88 2005 3361 3368
12. M. Gaudon, C. Laberty-Robert, F. Ansart, and P. Stevens Thick YSZ films prepared via a modified sol-gel route: thickness control (8-80 μm) J Eur Ceram Soc 26 2006 3153 3160
13. Y.L. Zhang, J.F. Gao, G.Y. Meng, and X.Q. Liu Production of dense yttria-stabilized zirconia thin films by dip-coating for IT-SOFC application J Appl Electrochem 34 2004 637 641
14. X. Xu, C. Xia, S. Huang, and D. Peng YSZ thin films deposited by spin-coating for IT-SOFCs Ceram Int 31 2005 1061 1064
15. J.M. Wang, Z. Lu, X.Q. Huang, K.F. Chen, N. Ai, and J.Y. Hu YSZ films fabricated by a spin smoothing technique and its application in solid oxide fuel cell J Power Sources 163 2007 957 959
16. M.F. Liu, D.H. Dong, L. Chen, J.F. Gao, X.Q. Liu, and G.Y. Meng Synthesis and electrochemical properties of (Pr-Nd)(1-y)SryMnO3-delta and (Pr1-xNdx)(0.7)Sr0.3MnO3-delta as cathode materials for IT-SOFC J Power Sources 176 2008 107 111
17. M.F. Liu, D.H. Dong, R.R. Peng, J.F. Gao, J. Diwu, and X.Q. Liu YSZ-based SOFC with modified electrode/electrolyte interfaces for operating at temperature lower than 650 °C J Power Sources 180 2008 215 220
18. S.D. Kim, S.H. Hyun, J. Moon, J.H. Kim, and R.H. Song Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells J Power Sources 139 2005 67 72
19. C.H. Yang, C. Jin, and F.L. Chen Micro-tubular solid oxide fuel cells fabricated by phase-inversion method Electrochem Commun 12 2010 657 660
20. C. Yang, W. Li, S. Zhang, L. Bi, R. Peng, and C. Chen Fabrication and characterization of an anode-supported hollow fiber SOFC J Power Sources 187 2009 90 92
21. S.G. Kim, S.P. Yoon, S.W. Nam, S.H. Hyun, and S.A. Hong Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol-gel coating method J Power Sources 110 2002 222 228
22. C. Jin, J. Liu, L.H. Li, and Y.H. Bai Electrochemical properties analysis of tubular NiO-YSZ anode-supported SOFCs fabricated by the phase-inversion method J Membr Sci 341 2009 233 237
23. T. Suzuki, Z. Hasan, Y. Funahashi, T. Yamaguchi, Y. Fujishiro, and M. Awano Impact of anode microstructure on solid oxide fuel cells Science 325 2009 852 855