Mode I delamination

European Structural Integrity Society

Volumn 28, Issue C, 2001, Pages 277-305

  Brunner, A J ^a   Blackman, B R K ^a   Davies, P ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77957072755     PISSN: 15661369     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S1566-1369(01)80038-8     Document Type: Article

References (55)

1. Davies P., Blackman B.R.K., and Brunner A.J. Standard Test Methods for Delamination Resistance of Composite Materials: Current Status. Applied Composite Materials 5 No. 6 (1998) 345-364
2. O'Brien T.K. Interlaminar fracture toughness: the long and winding road to standardisation. Composites Part B 29B No. 1 (1998) 57-62
3. Gillespie Jr. J.W., and Carlsson L.A. Interlaminar Fracture of Laminated Composite Materials. In: Pipes R.B., Blake R.A., Gillespie J.W., and Carlsson L.A. (Eds). Delaware Encyclopedia of Composite Materials Vol. 6 (1990) 111-160
4. Davies P., and Benzeggagh M.L. Interlaminar Mode-I Fracture Testing. In: Friedrich K. (Ed). Application of Fracture Mechanics to Composite Materials (1989), Elsevier, Lancaster 81-112
5. Sela N., and Ishai O. Interlaminar fracture toughness and toughening of laminated composites: A review. Composites 20 No. 5 (1989) 423-435
6. Davies P., Kausch H.H., Williams J.G., Kinloch A.J., Charalambides M.N., Pavan A., Moore D.R., Prediger R., Robinson I., Burgoyne N., Friedrich K., Wittich H., Rebelo C.A., Torres Marques A., Ramsteiner F., Melve B., Fischer M., Roux N., Martin D., Czarnocki P., Neville D., Verpoest I., Goffaux B., Lee R., Walls K., Trigwell N., Partridge I.K., Jaussaud J., Andersen S., Giraud Y., Hale G., and McGrath G. Round-robin interlaminar fracture testing of carbon-fibre-reinforced epoxy and PEEK composites. Comp. Sci. & Tech. 43 (1992) 129-136
7. O'Brien T.K., and Martin R.H. Round Robin Testing for Mode I Interlaminar Fracture Toughness of Composite Materials. J. Comp. Technol. & Res. 15 No. 4 (1993) 269-281
8. Hojo M., Kageyama K., and Tanaka K. Prestandardization study on mode I interlaminar fracture toughness test for CFRP in Japan. Composites 26 No. 4 (1995) 243-255
9. Brunner A.J. Experimental aspects of Mode I and Mode II fracture toughness testing of fibre-reinforced polymer-matrix composites. Comp. Methods Appl. Mech. Engrg 185 No. 2-4 (2000) 161-172
10. P. Davies, B.R.K. Blackman, A.J. Brunner "Introduction to Delamination Fracture of Continuous Fibre Composites: Mode II Delamination", this book.
11. B.R.K. Blackman, P. Davies, J.G. Williams, A.J. Brunner "Introduction to Delamination Fracture of Continuous Fibre Composites: Mixed Mode I/II Delamination", this book.
12. Cvitkovich M., and Lang R.W. Polymer matrix effects on interlaminar crack growth in advanced composites under mixed-mode conditions. Proceedings European Conference on Composite Materials, Composites Testing and Standardisation, CTS-2 (1994), Woodhead Publ. 543-551
13. llc: shear measurement or sheer myth?. NASA Technical Memorandum TM110280/Army Research Laboratory Technical Report ARL-TR 1312 (1997)
14. Compare data from ESIS round robins on CF-epoxy (IM7/977-1) presented in this paper and in the following papers [10, 11].
15. Japanese Industrial Standard JIS K 7086-1993 "Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics (1993), Japanese Standards Association
16. Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer-Matrix Composites, ASTM D 5528-94a (1994), American Society for Testing and Materials, West Conshohocken, USA
17. IC of Unidirectional Fiber-Reinforced Polymer Laminates Using the Double Cantilever Beam Specimen (DCB). ESIS TC4 (1995)
18. IC, For Unidirectionally Reinforced Materials. ISO/DIS 15024 (1999), International Organisation for Standardisation
19. Russell A.J., and Street K.N. Factors affecting the interlaminar fracture energy of graphite/Epoxy laminates. In: Hayashi T., Kawata K., and Umekawa S. (Eds). Proceedings ICCM-IV (1982) 279-286
20. IC in Angle Ply Composites Using a Cantilever Beam Test Method. J. Reinforced Plastics and Comp 2 (1983) 2-17
21. th European Conference on Fracture, ECF-12: Fracture from Defects Vol. III (1998), EMAS Publishing 1471-1476
22. th European Conference on Fracture, ECF7 (1988), EMAS Publisher 416-426
23. IIC in Carbon/Epoxy Composites. Comp. Sci. & Technol. 39 (1990) 193-205
24. Davies P., and Moore D.R. Glass/Nylon 66 composites: Delamination resistance testing. Comp. Sci. & Tech. 38 (1990) 221-227
25. Flüeler P., and Brunner A.J. Crack Propagation in Fiber-reinforced Composite Materials Analysed with In-situ Microfocal X-ray Radiography and Simultaneous Acoustic Emission Monitoring. In: Hogg P.J., Sims G.D., Matthews F.L., Bunsell A.R., and Massiah A. (Eds). Proceedings European Conference on Composites Testing and Standardisation, ECCM-CTS (1992), European Association for Composite Materials, EACM 395-404
26. nd ESIS conference on Fracture of Polymers, Composites and Adhesives. Les Diablerets (Switzerland) (September 13-15, 1999)
27. nd Conference on Composites Testing and Standardisation, CTS-2 (1994), Woodhead Publishing 523-532
28. th European Conference on Composite Materials, ECCM-7 Vol. 2 (1996), Woodhead Publishing 3-8
29. nd ESIS conference on Fracture of Polymers, Composites and Adhesives. Les Diablerets (Switzerland) (September 13-15, 1999)
30. Bascom W.D., Bitner J.L., Moulton R.J., and Siebert A.R. The interlaminar fracture of organic-matrix woven reinforcement composites. Composites 11 No. 1 (1980) 9-18
31. Mostovoy S., Crosley P.B., and Ripling E.J. Use of Crack-Line-Loaded Specimens for Measuring Plane-Strain Fracture Tounhness 2 (1967) 661-681
32. Phillips D.C. The fracture mechanics of carbon fibre laminates. J. Comp. Mat. 8 (1974) 130-141
33. Robinson P., and Song D.Q. A Modified DCB Specimen for Mode I Testing of Multidirectional Laminates. J. Comp. Mat. 26 No. 11 (1992) 1554-1577
34. A.L. Glessner, M.T. Takemori, M.A. Vallance, S.K. Gifford "Mode I Interlaminar Fracture Toughness of Unidirectional Carbon Fiber Composites Using a Novel Wedge-Driven Delamination Design" ASTM STP 1012 "Composite Materials: Fatigue and Fracture", (Ed. P.A. Lagace), 181-200 (1989).
35. Matsuda S., Hojo M., Ochiai S., Murakami A., Akimoto H., and Ando M. Effect of ionomer thickness on mode I interlaminar fracture toughness for ionomer toughened CFRP. Composites Part A 30A (1999) 1311-1319
36. Chen J.H., Schulz E., Bohse J., and Hinrichsen G. Effect of fibre content on the interlaminar fracture toughness of unidirectional glass-fibre/polyamide composite. Composites Part A 30A (1999) 747-755
37. Rikards R., Korjakin A., Buchholz F.G., Wang H., Bledzki A.K., and Wacker G. Interlaminar Fracture Toughness of GFRP Influenced by Fiber Surface Treatment. J. Comp. Mat. 32 No. 17 (1998) 1528-1559
38. Choi N.S., Kinloch A.J., and Williams J.G. Delamination Fracture of Multidirectional Carbon-Fiber/Epoxy Composites under Mode I, Mode II and Mixed-Mode I/II Loading. J. Comp. Mat. 33 No. 1 (1999) 73-100
39. Kusaka T., Hojo M., Mai Y.-W., Kurokawa T., Nojima T., and Ochiai S. Rate dependence of Mode I fracture behaviour in Carbon-Fibre/Expoxy composite laminates. Compos. Sci. & Technol. 58 (1998) 591-602
40. Wang W.X., Takao Y., Yuan F.G., Potter B.D., and Pater R.H. The Interlaminar Mode I Fracture of IM7/LaRC-RP46 Composites at High Temperatures. J. Comp. Mat. 32 No. 16 (1998) 1508-1526
41. Berry J.P. Determination of Fracture Energies by the Cleavage Technique. J. Appl. Phys. 34 No. 1 (1963) 62-68
42. IC Interlaminar Fracture Test. Appl. Comp. Mat. 3 (1996) 135-140
43. ASTM D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites (1997)
44. NATO Advanced Study Institute "Mechanics of Composite Materials and Structures. Blackman B.R.K., and Williams J.G. Impact and High Rate Testing of Composites. In: Mota Soares C.A., Mota Soares C.M., and Freitas M.J.M. (Eds). NATO Science Series E: Applied Science Vol. 361 (1999), Kluwer Academic 225-234
45. Unpublished results from ESIS TC4 round robin with a cross-ply carbon-fibre epoxy material (T300/970).
46. Hu X.-Z., and Mai Y.-W. Mode I delamination and fibre bridging in carbon fibre epoxy composites with and without PVAL coating. Comp. Sci. & Technol. 46 No. 2 (1993) 147-156
47. Ishai O. Interlaminar Fracture Toughness Characterization of Selectively Stitched Thick Fabric Composite Laminates. Proceedings European Conference on Composite Materials, and Standardisation, CTS-4 (1998), IOM Communications 127-137
48. nd ESIS conference on Fracture of Polymers, Composites and Adhesives, Les Diablerets. Switzerland (September 13-15, 1999)
49. Naik R.A., Crews Jr. J.H., and Shivakumar K.N. Effects of T-Tabs and Large Deflections in DCB Specimen Tests. In: O'Brien T.K. (Ed). Composite Materials; Fatigue and Fracture. ASTM STP 1110 (1991), American Society for Testing and Materials 169-186
50. O'Brien T.K., and Martin R.H. Results of ASTM Round Robin Testing for Mode I Interlaminar Fracture Toughness of Composites Materials. ASTM Journal of Composites Technology and Research 15 Nr. 4 (1993) 269-281
51. Hojo M., Kageyama K., and Kanaka K. Prestandardization study on mode I interlaminar fracture toughness test for CFRP in Japan. Composites 26 Nr. 4 (1995) 243-255
52. Flüeler P., and Brunner A.J. Crack Propagation in Fiber-Reinforced Composite Materials Analysed with In-situ Microfocal X-ray Radiography and Simultaneous Acoustic Emission Monitoring. In: Hogg P.J., Sims G.D., Matthews F.L., Bunsell A.R., and Massiah A. (Eds). Composites Testing and Standardisation ECCM-CTS (1992), European Association for Composite Materials 385-394
53. IC Interlaminar Fracture Test. Applied Composite Materials 3 (1996) 135-140
54. Hashemi S., Kinloch A.J., and Williams J.G. Corrections Needed in Double Cantilever Beam Tests for Assessing the Interlaminar Failure of Fiber-composites. Journal of Materials Science Letters 8 (1989) 125-129
55. Brunner A.J., Tanner S., Davies P., and Wittich H. Interlaminar Fracture Testing of Unidirectional Fibre-Reinforced Composites:Results from ESIS-Round Robins. In: Hogg P.J., Schulte K., and Wittich H. (Eds). Composites Testing and Standardisation ECCM-CTS 2 (1994), Woodhead Publishing 523-532