Standard Test Methods for Delamination Resistance of Composite Materials: Current Status

Applied Composite Materials

Volumn 5, Issue 6, 1998, Pages 345-364

  Davies, P ^a   Blackman, B R K ^b   Brunner, A J ^c  

^a IFREMER   (France)

^b IMPERIAL COLLEGE LONDON   (United Kingdom)

^c SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

Author keywords

Delamination resistance; Fibre reinforced composites; Fracture; Standardisation

Indexed keywords

CRACK PROPAGATION; DELAMINATION; FATIGUE OF MATERIALS; FRACTURE; FRACTURE TESTING; STANDARDIZATION; FRACTURE MECHANICS;

DELAMINATION RESISTANCE; EUROPEAN STRUCTURAL INTEGRITY SOCIETY; DELAMINATING RESISTANCE; STANDARD TESTING;

FIBER REINFORCED PLASTICS; FIBER REINFORCED MATERIALS;

EID: 0032194941     PISSN: 0929189X     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1008869811626     Document Type: Article

References (116)

1. c for Plastics', ESIS, March 1990.
2. Hale, G., 'A Testing Protocol for Conducting J-Crack Growth Resistance Curves on Plastics', ESIS, May 1994.
3. Moore, D. R. and Williams, J. G., 'A Protocol for Determination of the Interfacial Work of Fracture by Peel Testing of Flexible Laminates', A Draft ESIS Protocol, July 1996.
4. Ic for Plastics a High Loading Rates', ESIS Draft, 7 March 1996.
5. Ic of Structural Adhesives Using the Double Cantilever Beam (DCB) Specimen and Tapered DCB Specimens', version 97-04.
6. Roulin Moloney, A. C. and Davies, P., Proc ECF7, Budapest, 1988, EMAS, p. 416.
7. Davies, P., Moulin, C., Kausch, H. H. and Fischer, M., Comp. Sci. & Tech. 39, 1990, 193.
8. Davies, P. and Moore, D. R., Comp. Sci. & Tech. 38, 1990, 211.
9. Davies, P. et al., Comp. Sci. & Tech. 43, 1992, 129.
10. O'Brien, T. K. and Martin R. H., Comp. Tech. & Research 15(4), 1993, 269.
11. Masters, J. E., Proc. ICCM6/ECCM2, Vol. 3, 1987, p. 96.
12. ASTM D5528-94a, Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Polymer Matrix Composites.
13. JIS 7086, Testing Methods for Interlaminar Fracture Toughness of Carbon Fiber Reinforced Plastics, 1993.
14. IIc (prEN6034), 12/95.
15. Davies, P. and Benzeggagh, M. L., Ch. 3 in Application of Fracture Mechanics to Composite Materials, ed. K. Friedrich, Elsevier, 1989.
16. Phillips, D. C. and Wells, G. M., J. Mat. Sci. Letters 1, 1982, 321.
17. Johnson, W S. and Mangalgiri, P. D., NASA Tech Memo 87716,1986.
18. Russell, A. J., Polymer Composites, Oct. 1987, 342.
19. Davies, P., Cantwell, W. J., Moulin, C. and Kausch, H. H., Comp. Sci. & Tech. 36, 1989, 153.
20. Prel, Y. J., Davies, P., Benzeggagh, M. L. and De Charentenay, F. X., ASTM STP 1012, 1989, 251.
21. Davies, P., Cantwell, W J. and Kausch, H. H., Comp. Sci. & Tech. 35, 1989, 301.
22. Martin, R. H., Proc. American Soc. for Composites 3rd Tech. Conf., 1988, p. 688.
23. Davies, P. and Brunellière, O., J. Mat. Sci. Letters 12, 1992, 427.
24. Hojo, M., Kageyama, K. and Tanaka, K., Composites 26(4), 1995, 243.
25. De Kalbermatten, T., Jaggi, R., Flueler, P., Kausch, H. H. and Davies, P., J. Mat. Sci. Letters 11, 1992, 543.
26. Flueler, P. and Brunner, A. J., Proc. ECCM CTS, 1992, 385.
27. ASTM E399, Test Method for Plane Strain Fracture Toughness of Metallic Materials.
28. Davies, P., Applied Composite Materials 3, 1996, 135.
29. Ic, of Unidirectional Fibre Reinforced Polymer Matrix Composites, version February 1997.
30. Hashemi, S., Kinloch, A. J. and Williams, J. G., J. Mat. Sci. Letters 8, 1989, 125.
31. Hashemi, S., Kinloch, A. J. and Williams, J. G., Proc. Royal Soc. A427, 1990, 173.
32. Berry, J. P., J. Appl. Physics 34, 1963, 62.
33. Carlsson, L. A. and Gillespie, J. W., Ch. 4 in Application of Fracture Mechanics to Composite Materials, ed. K. Friedrich, Elsevier, 1989.
34. Barrett, J. D. and Foschi, R. O., Eng. Fract. Mech. 9, 1977, 371.
35. Russell, A. J. and Street, K. N., Proc. ICCM4, Tokyo, 1982, p. 279.
36. O'Brien, T. K., NASA Tech. Memo 110280, Feb. 1997.
37. Davies, P., Ducept, F., Brunner, A. J., Blackman, B. R. K. and de Morais, A. B., Proc. ECCM7/ECCM CTS3, Vol. 2, London, 1996, p. 9.
38. Nicholls, D. J. and Gallagher, J. P., J. Reinf. Plastics & Comp. 2, 1983, 2.
39. Chai, H., Composites 15, 1984, 277.
40. Marom, G., Roman, I., Harel, H., Rosensaft, M., Kenig, S. and Moshonov, M., Proc ICCM6/ECCM2, Vol. 3, 1987, p. 265.
41. Davidson, B. D., J. Comp. Materials 24, 1990, 1124.
42. Ozdil, P. and Carlsson, L. A., 'Beam Analysis of Angle Ply Laminate DCB Specimens', Comp. Sci. & Tech., 1998 (in press).
43. Davidson, B. D., Kruger, R. and Konig, M., Eng. Fract. Mech. 55, 1996, 557.
44. Laksimi, A., Benzeggagh, M. L., Jing, G., Hecini, M. and Roelandt, J. M., Comp. Sci. & Tech. 41, 1991, 147.
45. Thesken, J. C., Brandt, F. and Nilsson, X. X., Proc. 19th ICAS Congress, 1994, p. 1.
46. Tohgo, K., Hirako, Y., Ishii, H. and Sano, K., J. Comp. Materials 30(6), 1996, 650.
47. Bathias, C. and Laksimi, A., ASTM STP 876, 1985, 217.
48. Martin, R. H., J. Comp. Tech. & Research 19(1), 1997, 20.
49. Saidpour, H. and Sezen, X. Y., et. al., Proc. ICCN11, July 1997, V-27.
50. Davies, P., 'Fracture of Marine Composites', in Fracture of Composites, ed. E. Armanios, Transtec publications, 1996, p. 83.
51. Blackman, B. R. K. and Brunner, A. J., Proc. ECF12, Sheffield, 1998, EMAS (in press).
52. Riddle, R. A. and Beckwith, S. W., ASTM STP 893, 1986, p. 64.
53. Davies, P. and Rannou, F., Appl. Comp. Materials 1, 1995, 333.
54. Beckert, W., Lauke, B. and Friedrich, K., Appl. Comp. Materials 1, 1995, 395.
55. Cantwell, W. J. and Davies, P., Appl. Comp. Materials 3, 1996, 407.
56. Bascom, W. D., Bitner, J. L., Moulton R. J. and Siebert, A. R., Composites 11(1), 1980, 9.
57. Mostovoy, S., Crosley, P. B. and Ripling, E. J., J. Materials 2, 1967, 661.
58. Phillips, D. C., J. Comp. Materials 8, 1974, 130.
59. Robinson, P. and Song, D. Q., J. Comp. Materials 26, 1992, 1554.
60. Glessner, A. L., Takemori, M. T., Vallance, M. A. and Gifford, S. K., ASTM STP 1012, 1989, p. 181.
61. Tanaka, K., Kageyama, K. and Hojo, M., Composites 26(4), 1995, 257.
62. Kageyama, K., Kikuchi, M. and Yanagisawa, N., ASTM STP 1110, 1991, p. 210.
63. Tanaka, K., Proc. 1991 Meeting Japan Society for Composite Materials, p. 31.
64. Vanderkley, P. S., M.S. Thesis, Texas A&M University, 1981.
65. Russell, A. J. and Street, K. N., ASTM STP 937, 1987, p. 271.
66. Martin, R. and Davidson, B. S., Proc. 4th Int. Conf on Deformation & Fracture of Composites, 1997, p. 243.
67. Murri, G. B. and Martin, R. H., ASTM STP 1156, 1993, p. 239.
68. ESIS Round robin results, 1994, unpublished.
69. Carlsson, L. A., Gillespie, J. W. and Pipes, R. B., Comp. Sci. & Tech. 26, 1986, 177.
70. Davies, P., J. Thermoplastic Composites 10, 1997, 353.
71. Wang, Y and Williams, J. G., Comp. Sci. & Tech. 43, 1992, 251.
72. IIc of Unidirectional Carbon/Epoxy Composites', presented at ISO meeting Davos, September 1997 (available from author).
73. Crews, J. H. and Reeder, J. R., NASA TM 100662, 1988.
74. Reeder, J. R. and Crews, J. H., NASA TM 102777, 1991.
75. Singh, S. and Partridge, I. K., Polymers & Polymer Composites 3(1), 1995, 35.
76. Cvitkovich, M. and Lang, R. W., Proc. ECCM CTS2, 1994, 543.
77. Benzeggagh, M. L. and Kenane, M., Comp. Sci. & Tech. 56(4), 1996, 439.
78. Johnson, W. S., NASA Tech. Memo 89006, 1986.
79. Gustafson, C.-G., Hojo, M. and Holm. D., J. Comp. Materials 23, 1989, 146.
80. Johannesson, T. and Blikstad, M., Proc. ISCMS, Beijing, June 1986, p. 495.
81. O'Brien, T. K., ASTM STP 836, 1984, p. 125.
82. Arcan M., Hashin, Z. and Voloshin A., Exp. Mechanics, April 1978, 141.
83. Jurf, R. A. and Pipes, R. B., J. Comp. Materials 16, 1982, 386.
84. Hashemi, S., Kinloch, A. J. and Williams, G., ASTM STP 1110, 1991, 143.
85. Gong, X.-J. and Benzeggagh, M. L., ASTM STP 1230, 1995, 100.
86. Turmel, D. J.-P., Szpicak, J.-A., Singh, S. and Partridge, I. K., Proc. 3rd Int. Conf. on Deformation & Fracture of Composites, Surrey, 1995.
87. Bhashyam, S. and Davidson, B., Proc. 37th AIAA/ASME/ASCE/AHS/ASC Conference, April 1996, p. 886.
88. Martin R. H. and Hansen, P. L., ASTM STP 1285, 1996.
89. Ducept, F., Davies, P. and Gamby, D., Composites Part A 28A, 1997, 719.
90. Fernlund, G., Lanting, H. and Spelt, J. K., J. Comp. Tech. & Research 17(4), 1995, 317.
91. Ripling, E. J., Santner, J. S. and Crosley, P. B., J. Mat. Sci. 18, 1983, 2274.
92. Donaldson, S., Comp. Sci. & Tech. 32, 1988, 225.
93. Martin R. H., ASTM STP 1110, 1991, p. 243.
94. Robinson, P. and Song, D. Q., Advanced Composite Letters 1(5), 1992, 160.
95. Becht, G. and Gillespie, J. W., Comp. Sci. & Tech. 31, 1988, 143.
96. Lee, S. M., J. Comp. Tech. & Research 15(3), 1993, 193.
97. Farshad, M., Proc. European Conf. on Macromolecular Physics, ed. EPS, Vol. 21B, 1997, p. 145.
98. ASTM D3479-76, Tension-Tension Fatigue of Oriented Fiber, Resin Matrix Composites.
99. Martin, R. H. and Murri, G. B., NASA Tech. Memo 100577, 1988.
100. Richard, H., Davies, P., Cantwell, W. J. and Kausch, H. H., Proc. ESIS11, MEP, 1991, p. 233.
101. Murri, G. B., Salpekar, S. A. and O'Brien, T. K., ASTM STP 1110, 1991, p. 312.
102. ASTM, A Protocol for Interlaminar Fatigue Fracture Testing, End Notched Flexure (ENF), July 1994 (G. B. Murri).
103. ASTM D6115-97, Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites, 1997.
104. Hojo, M., Tanaka, K., Gustafson, C. G. and Hayashi, R., Comp. Sci. & Tech. 29, 1987, 273.
105. Hojo, M., Tanaka, K., Gustafson, C. G. and Kemmochi, K., Proc. 6th Int. Conf. on Mech. Behavior of Materials, Vol. 2, Pergamon, 1991, p. 531.
106. Kageyama, K., Kimpara, I., Ohsawa, I., Hojo, M. and Kabashima, S., ASTM STP 1230, 1995, p. 19.
107. Hojo, M., Matsuda, S. and Ochiai, S., Proc. Int. Conf. on Fatigue, SF2M, Paris, 1997.
108. Wilkins et al., ASTM STP 775, 1982, p. 168.
109. Mall, S. et al., ASTM STP 1012, 1989, p. 296.
110. Kenane, M., Ph.D. Thesis, Université de Technologie de Compiègne, 1997 (in French).
111. Smiley, A. J. and Pipes, R. B., J. Comp. Materials 21, 1987, 670.
112. Blackman, B. R. K., Dear, J. P., Kinloch, A. J., MacGillivray, H., Wang, Y., Williams, J. G. and Yayla, P., J. Mat. Sci. 30, 1995, 5885.
113. Blackman, B. R. K., Kinloch, A. J., Wang, Y. and Williams, J. G., J. Mat. Sci. 31, 1996, 4451.
114. Blackman, B. R. K., Dear, J. P., Kinloch, A. J., MacGillivray, H., Wang, Y., Williams, J. G. and Yayla, P., J. Mat. Sci. 31, 1996, 4467.
115. Aliyu, A. A. and Daniel, I. M., ASTM STP 876, 1985, p. 336.
116. Cantwell, W. J., J. Comp. Materials 31(14), 1997, 1364.