Saturation of fragmentation during severe plastic deformation

Annual Review of Materials Research

Volumn 40, Issue , 2010, Pages 319-343

  Pippan, R ^a   Scheriau, S ^b   Taylor, A ^a   Hafok, M ^a   Hohenwarter, A ^b   Bachmaier, A ^a  

^a ERICH SCHMID INSTITUTE OF MATERIALS SCIENCE   (Austria)

^b INSTITUTE FOR MICROELECTRONICS   (Austria)

Author keywords

grain boundary migration; high pressure torsion; nanocomposites; nanocrystalline; ultrafine grained material

Indexed keywords

DEFORMATION TEMPERATURES; DOMINANT FACTOR; DOMINANT PROCESS; EFFECTIVE TOOL; GRAIN BOUNDARY MIGRATIONS; GRAIN SIZE; HIGH ANGLE BOUNDARIES; HIGH PRESSURE TORSIONS; HOMOLOGOUS TEMPERATURE; LOW ANGLE BOUNDARIES; LOW TEMPERATURES; LOW-TEMPERATURE REGIME; MEDIUM TEMPERATURE; NANO-METER SCALE; NANOCRYSTALLINES; PURE METALS; SECOND PHASE PARTICLES; SEVERE PLASTIC DEFORMATIONS; SINGLE-PHASE MATERIALS; STRAIN PATHS; THERMAL STABILITY; ULTRA FINE GRAINED MICROSTRUCTURE; ULTRAFINE GRAINED MATERIALS;

ALLOYING; ALLOYING ELEMENTS; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; MICROSTRUCTURE; NANOCOMPOSITES; PLASTIC DEFORMATION; STRAIN RATE; THERMODYNAMIC STABILITY; TORSIONAL STRESS;

GRAIN REFINEMENT;

EID: 77957065875     PISSN: 15317331     EISSN: None     Source Type: Book Series    
DOI: 10.1146/annurev-matsci-070909-104445     Document Type: Article

References (86)

1. Valiev RZ, Islamgaliev RK, Alexandrov IV. 2000. Bulk nanostructured materials from severe plastic deformation. Prog. Mater. Sci. 45:103-189
2. Valiev RZ, Islamgaliev RK, Kuzmina NF, Yong Li, Langdon TG. 1999. Strengthening and grain refinement in an Al-6061 metal matrix composite through intense plastic straining. Scr. Mater. 40:117-122
3. Viswanathan V, Laha T, Balani K, Agarwal A, Seal S. 2006. Challenges and advances in nanocomposite processing techniques. Mater. Sci. Eng. R54:121-285
4. Zehetbauer MJ, ValievRZ, eds. 2004. Nanomaterials by Severe Plastic Deformation.Weinheim:Wiley-VCH
5. Zhu YT, Langdon TG, Valiev RZ, Semiatin SL, Shin DH, Lowe TC, eds. 2004. Ultrafine Grained Materials III.Warrendale, PA: TMS
6. Zhu YT, Langdon TG, Mishra RS, Semiatin SL, Saran MJ, Lowe TC, eds. 2002. Ultrafine Grained Materials II.Warrendale, PA: TMS
7. Lowe TC, Valiev RZ, eds. Investigations and applications of SPD. Nato Sci. Ser. 3. High Technology 80
8. Zehetbauer MJ, Zhu YT, eds. 2009. Bulk Nanostructured Materials.Weinheim, Ger.: Wiley-VCH
9. Horita Z, ed. 2006. Nanomaterials by severe plastic deformation. Mater. Sci. Forum 503-504
10. Pippan R,Wetscher F, Hafok M, Vorhauer A, Sabirov I. 2006. The limits of refinement by severe plastic deformation. Adv. Eng. Mater. 8:1046-1056
11. Zhilyaev AP, Langdon TG. 2008. Using high pressure torsion for metal processing: Fundamentals and applications. Progr. Mater. Sci. 53:893-979
12. Zharin VA, Shashkin DP, Yenikoponyan NS. 1984. Proc. USSR Acad. Sci., DAN SSR 278:144
13. Kuznetsov RI, Bykov VI, Chernyshev VP, Pilyugin VP, Yefremov NA, Pashegev AV. 1985. Plastic deformation of solid bodies under pressure. 1. Equipment and methods. Inst. Phys. Math., Urals Sci. Cent., Sverdlovsk, USSR, Preprint 4/85 (in Russian)
14. Bridgman PW. 1952. Studies in Large Plastic Flow and Fracture. New York: McGraw Hill
15. Vorhauer A, Pippan R. 2004. On the homogeneity of deformation by high pressure torsion. Scr. Mater. 51:921-925
16. Hebesberger T, Stuwe HP, Vorhauer, Wetscher F, Pippan R. 2005. Structure of Cu deformed by high pressure torsion. Acta Mater. 53:393-402
17. St ?uwe HP. 2003. Equivalent strains in severe plastic deformation. Adv. Eng. Mater. 5:291-295
18. Wetscher F, Vorhauer A, Pippan R. 2005. Strain hardening during high pressure torsion deformation. Mater. Sci. Eng. A 401-411:313-316
19. Wadsack R, Pippan R, Schedler B. 2002. The effect of predeformation on the ductility of chromium. J. Nucl. Mater. 307-311:701-704
20. Sabirov I, Pippan R. 2005. Formation of a W-25%Cu nanocomposite during high pressure torsion. Scr. Mater. 52:1293-1298 (Pubitemid 40467162)
21. Faleschini M, Kreuzer H, Kiener D, Pippan R. 2007. Fracture toughness investigations of tungsten alloys and SPD tungsten alloys. J. Nucl. Mater. 367-370:800-805
22. Ivanisenko Y, Lojkowski W, Valiev RZ, Fecht HJ. 2003. The mechanism of formation of nanostructure and dissolution of cementite in a pearlitic steel during high pressure torsion. Acta Mater. 51(10):947-952
23. Ivanisenko Y, MacLaren I, Sauvage X, Valiev RZ, Fecht HJ. 2006. Phase transformations in pearlitic steels induced by severe plastic deformation. High Press. Technol. Nanomater. 114:133-144
24. Rentenberger C, Waitz T, Karnthaler HP. 2004. HRTEM analysis of nanostructured alloys processed by severe plastic deformation. Scr. Mater. 51(8):789-794
25. Rentenberger C, Waitz T, Karnthaler HP. 2007. Formation and structures of bulk nanocrystalline intermetallic alloys studied by transmission electron microscopy. Mater. Sci. Eng. A 462(1-2):283-288
26. Concustell A, Sort J, Surinach S, Gebert A, Eckert J et al. 2007. Severe plastic deformation of a Ti-based nanocomposite alloy studied by nanoindentation. Intermetallics 15(8):1038-1045
27. Wetscher F, Pippan R, Sturm S, Kauffmann F, Scheu C, Dehm G. 2006. TEM investigations of the structural evolution in a pearlitic steel deformed by high-pressure torsion. Metall. Mater. Trans. A60:1963-1968
28. Wetscher F, Vorhauer A, Stock R, Pippan R. 2004. Structural refinement of low alloyed steels during severe plastic deformation. Mater. Sci Eng. A 387-389:809-816
29. Harai Y, Kai M, Kaneko K, Horita Z, Langdon TG. 2008. Microstructural and mechanical characteristics of AZ61 magnesium alloy processed by high-pressure torsion. Mater. Trans. 49(1):76-83 (Pubitemid 351280668)
30. Bonarski BJ, Schafler E, Mingler B, Skrotzki W, Mikulowski B, Zehetbauer MJ. 2008. Texture evolution of Mg during high-pressure torsion. J. Mater. Sci. 43(23-24):7513-7518
31. Revesz A, Schafler E, Kovacs Z. 2008. Structural anisotropy in a Zr57Ti5Cu20Al10Ni8 bulk metallic glass deformed by high pressure torsion at room temperature. Appl. Phys. Lett. 92:011910
32. Meyer LW, Hockauf M, Hohenwarter A, Schneider S. 2008. Ultimate strength of tungsten heavy alloy after severe plastic deformation at quasi static and dynamic loading. Mater. Sci. Forum 584-586:405-410
33. Vorhauer A, Pippan R. 2008. On the onset of a steady state in body-centered cubic iron during severe plastic deformation at low homologous temperatures. Metall. Mater. Trans. A 39:417-429
34. Wetscher F, Vorhauer A, Pippan R. 2005. Strain hardening during high pressure torsion deformation. Mater. Sci. Eng. A 410-411:213-216 (Pubitemid 41781456)
35. Wetscher F, Pippan R. 2006. Cyclic high-pressure torsion of nickel and Armco iron. Philos. Mag. 86(36):5867-5883
36. Wetscher F, Pippan R. 2009. Hardening and softening behavior by cyclic high-pressure torsion. Metall. Mater. Trans. A 40:3258-3263
37. Mizunuma S. 2006. Large straining behavior and microstructure refinement of several metals by torsion extrusion process. Nanomater. Severe Plast. Deform. 503-504:185-190
38. Pippan R. 2009. High pressure torsion: features and applications. In Bulk Nanostructured Materials, ed. M Zehetbauer, YT Zhu, pp. 217-233 Weinheim:Wiley-VCH
39. Hansen N, Mehl FR. 2001. New discoveries in deformed metals. Metall. Mater. Trans. A 32:2917-2935
40. Humphreys FJ, Hatherly M, eds. 1995. Recrystallization and Related Annealing Phenomena. Oxford, UK: Pergamon
41. Hansen N, Kuhlmann-Wilsdorf D. 1986. Low energy dislocation structures due to unidirectional deformation at low temperatures. Mater. Sci. Eng. 81:141-161
42. WintherG,Huang X, Hansen N. 2000. Crystallographic and macroscopic orientation of planar dislocation boundaries: correlation with grain orientation. Acta Mater 48(9):2187-2198
43. Kocks UF, Mecking H. 2003. Physics and phenomenology of strain hardening: the FCC case. Prog.Mater. Sci. 48:171-273
44. Hafok M, Pippan R. 2008. High-pressure torsion applied to nickel single crystals. Philos.Mag. 88(12):1857-1877
45. ZhangHW, Huang X,HansenN. 2008. Evolution ofmicrostructural parameters and flow stresses toward limits in nickel deformed to ultrahigh strains. Acta Mater. 56(19):5451-5465
46. Schafler E, Pippan R. 2004. Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel. Mater. Sci. Eng. A 387-389:799-804
47. Tatschl A, Kolednik O. 2003. On the experimental characterization of crystal plasticity in polycrystals. Mater. Sci. Eng. A 342:152-168
48. Sachtleber M, Zhao Z, Raabe D. 2002. Experimental investigation of plastic grain interaction. Mater. Sci. Eng. A 336:81-87
49. Musienko A, Tatschl A, Schmidegg K, Kolednik O, Pippan R, Cailletaud G. 2007. Three-dimensional finite element simulation of a polycrystalline copper specimen. Acta Mater. 55:4121-4136
50. Yang B, Vehoff H, Hohenwarter A, Hafok M, Pippan R. 2008. Strain effects on the coarsening and softening of electrodeposited nanocrystallineNi subjected to high pressure torsion. Scr. Mater. 58:790-793
51. Hafok M, Vorhauer A, Keckes J, Pippan R. 2006. HPT-deformation of copper and nickel single crystals. Mater. Sci. Forum 503-504:621-626
52. Oh-ishi K, Horita Z, Smitz DJ, Valiev RZ, Nemoto M, Langdon TG. 1999. Fabrication and thermal stability of a nanocrystallineNi-Al-Cr alloy: comparison with pure Cu and Ni. J. Mater. Sci. 14(11):4200-4207
53. Bachmaier A,Hafok M, Pippan R. 2010. Rate independent and rate dependent structural evolution during severe plastic deformation. JIM Mater. Trans. 51(1)8-13
54. Vorhauer A, Hebesberger T, Pippan R. 2003. Disorientations as a function of distance: a new procedure to analyze local orientation data. Acta Mater. 51:677-686
55. KozlovEV, ZhdanovAN, PopovaNA, Pekarskaya EE, KorenvaNA. 2004. Subgrain structure and internal stress fields in UFG materials: problem of Hall-Petch relation. Mater. Sci. Eng. A 387-389:789-794
56. Xu C, Furukawa M, Horita Z, Langdon TG. 2003. Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spray-cast aluminum alloy. Acta Mater. 51:6139-6149
57. Huang Y, Langdon TG. 2003. Using atomic forcemicroscopy to evaluate the development ofmesoscopic shear planes in materials processed by severe plastic deformation. Mater. Sci. Eng. A 358:114-121
58. Valiev RZ, Ivanishenko YV, Rauch EF, Baudelet B. 1996. Structure and deformation behavior of Armco iron subjected to severe plastic deformation. Acta Mater. 44:4705-4712
59. Takaki S, Kawasaki K, Kimura Y. 2001. Mechanical properties of ultra fine grained steels. Mater. Process. Technol. 117:359-363
60. HafokM, Pippan R. 2007. Shear deformation of submicron structured materials. J. Mater. Res. 98:283-289
61. Hafok M, Pippan R. 2007. Post-shear deformation of high pressure torsion-deformed nickel under hydrostatic pressure. Scr. Mater. 56:757-760
62. Gourdet S, Montheillet F. 2000. An experimental study of the recrystallization mechanism during hot deformation of aluminum. Mater. Sci. Eng. A 283(1-2):274-288
63. McQueen HJ, Evangelista E, Kassner ME. 1991. Classification and determination of restoration mechanisms in the hot working of Al alloys. Z. Metallkd. 82:336-345
64. Belyakov A, Sakai T, Miura H, Kaibyshev R, Tsuzaki K. 2002. Continuous recrystallization in austenitic stainless steel after large strain deformation. Acta Mater. 50:1547-1557
65. Kassner ME, McQueen HJ, Evangelista E. 1993. Geometric dynamic recrystallization in aluminum and aluminum alloys above 0.6Tm. Mater. Sci. Forum 113-115:151-156
66. DruryMR, Humphreys FJ. 1986. The development of microstructure in Al-5%Mg during high temperature deformation. Acta Metall. 34:2259-2271
67. Montheillet F. 2004. Moving grain boundaries during hot deformation of metals: dynamic recrystallization. In Moving Interfaces in Crystalline Solids (CISM Courses and Lectures No. 453), ed. FD Fischer, pp. 203-256 New York: Springer
68. Van Swygenhoven H, Derlet PM, Budrovic Z, Hasnaoui A. 2003. Unconventional deformation mechanism in nanocrystalline metals? Z. Metall. 94(10):1106-1110
69. Wolf D, Yamakov V. 2009. MD simulation of deformation mechanisms in nanocrystalline materials. In Bulk Nanostructured Materials, ed. MJ Zehetbauer, YT Zhu, pp. 165-202. Weinheim, Ger.: Wiley-VCH
70. Brandstetter S, Zhang K, Escuadro A, Weertman JR, Van Swygenhoven H. 2008. Grain coarsening during compression of bulk nanocrystalline nickel and copper. Scr. Mater. 58(1):61-64
71. Mompiou F, Caillard D, Legros M. 2009. Grain boundary shear-migration coupling. I. In situ TEM straining experiments in Al polycrystals. Acta Mater. 57:2198-2209
72. Caillard D, Mompiou F, Legros M. 2009. Grain boundary shear-migration coupling. II. Geometrical model for general boundaries. Acta Mater. 57:2390-2402
73. Mughrabi H, Hoppel H, Kautz M, Valiev RZ. 2003. Annealing treatments to enhance thermal and mechanical stability of ultrafine-grained metals produced by severe plastic deformation. Z. Metall. 94:1079-1083
74. Mughrabi H, HoppelH, Kautz M. 2004. Fatigue andmicrostructure of ultrafine-grained metals produced by severe plastic deformation. Scr. Mater. 51:807-812
75. Winning M, Gottstein G, Shvindlerman LS. 2002. On themechanisms of grain boundary migration. Acta Mater. 50:353-363
76. ZhangHW, Huang X,HansenN. 2008. Evolution ofmicrostructural parameters and flow stresses toward limits in nickel deformed to ultrahigh strains. Acta Mater. 56:5451-5465
77. Hafok M. 2007. Aufkl̈arung der Verformungsvorg̈ange bei der Hochverformung. Dissertation, Montanuniv., Leoben
78. Valiev RZ, Langdon TG. 2006. Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog. Mater. Sci. 51:881-981
79. RichertM, Stuwe HP, Zehetbauer MJ, Richert J, Pippan R et al. 2003. Work hardening and microstructure of AlMg5 after severe plastic deformation by cyclic extrusion and compression. Mater. Sci. Eng. A 355:180-185
80. Mironov SY, Salishchev GA, Myshlyaev MM, Pippan R. 2006. Evolution of misorientation distribution during warm "abc" forging of commercial-purity titanium. Mater. Sci. Eng. A 418:257-267
81. Dinda GP, Rosner H, Wilde G. 2005. Synthesis of bulk nanostructured Ni, Ti and Zr by repeated cold-rolling. Scr. Mater. 52(7):577-582 (Pubitemid 40114519)
82. Sauvage X, Jessner P, Vurpillot F, Pippan R. 2008. Nanostructure and properties of a Cu-Cr composite processed by severe plastic deformation. Scr. Mater. 58:1125-1128
83. Sabirov I, Kolednik O, Pippan R. 2005. Homogenization of metal matrix composites by high-pressure torsion. Metall. Mater. Trans. A 36:2861-2870 (Pubitemid 41490053)
84. Sabirov I, Kolednik O, Valiev RZ, Pippan R. 2005. Equal channel angular pressing of metal matrix composites: effect on particle distribution and fracture toughness. Acta Mater. 53:4919-4930
85. Bachmaier A, Hohenwarter A, Pippan R. 2009. New procedure to generate stable nanocrystallites by severe plastic deformation. Scr. Mater. 61:1016-1019
86. Tokunaga T, Kaneko K, Sato K, Horita Z et al. 2008. Microstructure and mechanical properties of aluminum-fullerene composite fabricated by high pressure torsion. Scr. Mater. 58(9):735-738