Current-activated, pressure-assisted densification of materials

Annual Review of Materials Research

Volumn 40, Issue , 2010, Pages 445-468

  Garay, J E ^a  

^a University of California ^*  (United States)

Author keywords

electric current effects; field assisted sintering; nanocrystalline materials; powder densification; pulsed electric current sintering; spark plasma sintering

Indexed keywords

CURRENT EFFECT; FIELD-ASSISTED SINTERING; NANOCRYSTALLINES; POWDER DENSIFICATION; PULSED ELECTRIC-CURRENT SINTERING; SPARK PLASMA;

DENSIFICATION; ELECTRIC SPARKS; NANOCRYSTALLINE POWDERS; SPARK PLASMA SINTERING;

NANOCRYSTALLINE MATERIALS;

EID: 77957014323     PISSN: 15317331     EISSN: None     Source Type: Book Series    
DOI: 10.1146/annurev-matsci-070909-104433     Document Type: Article

References (50)

1. Munir ZA, Anselmi-Tamburini U, Ohyanagi M. 2006. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method. J. Mater. Sci. 41:763-777
2. Orr̀u R, Licheri R, Locci AM, Cincotti A, Cao G. 2009. Consolidation/synthesis of materials by electric current activated/assisted sintering. Mater. Sci. Eng. R 63:127-287
3. Xie G, Ohashi O, Yoshioka T, Song M, Mitsuishi K et al. 2001. Effects of interface behavior between particles on particles of pure Al powder compacts by spark plasma sintering. Mater. Trans. 42:1846-1849
4. Angerer P, Neubauer E, Yu LG, Khor KA. 2007. Texture and structure evolution of tantalum powder samples during spark-plasma-sintering (SPS) and conventional hot-pressing. Int. J. Refract. Met. Hard Mater. 25:280-285
5. Zhou Y, Hirao K, Yamauchi Y, Kanzaki S. 2004. Densification and grain growth in pulse electric current sintering of alumina. J. Eur. Ceram. Soc. 24:3465-3470
6. Angerer P, Yu LG, Khor KA, Krumpel G. 2004. Spark-plasma-sintering (SPS) of nanostructured and submicron titanium oxide powders. Mater. Sci. Eng. A 381:16-19
7. Chaim R, Shen Z, Nygren M. 2004. Transparent nanocrystalline MgO by rapid and low-temperature spark plasma sintering. J. Mater. Res. 19:2527-2531
8. Anselmi-Tamburini U, Garay JE, Munir ZA, Tacca A, Maglia F et al. 2004. Spark plasma sintering and characterization of bulk nanostructured fully-stabilized zirconia (FSZ). I. Densification studies. J. Mater. Res. 19(11):3255-3262 (Pubitemid 40059984)
9. Ohyanagi M, Yamamoto T, Kitaura H, Kodera Y, Ishii T, Munir ZA. 2004. Consolidation of nanostructured SiC with disorder-order transformation. Scr. Mater. 50:111-114
10. Shen Z, Johnsson M, Zhao Z, Nygren M. 2002. Spark plasma sintering of alumina. J. Am. Ceram. Soc. 85(8):1921-1927
11. Olevsky EA, Kandukuri S, Froyen L. 2007. Consolidation enhancement in spark-plasma sintering: impact of high heating rates. J. Appl. Phys. 102:114913
12. Anselmi-Tamburini U, Garay JE, Munir ZA. 2006. Fast low-temperature consolidation of nanometric ceramic materials. Scr. Mater. 54:823-828
13. Wang X, Casolco SR, Xu G, Garay JE. 2007. Finite element modeling of electric current activated sintering: the effect of coupled electrical potential, temperature and stress. Acta Mater. 55:3611-3622
14. Xu J, Casolco SR, Garay JE. 2009. Effect of varying displacement rates on the densification of nanostructured zirconia by current activation. J. Am. Ceram. Soc. 92:1506-1513
15. Chen W, Anselmi-Tamburini U, Garay JE, Groza JR, Munir ZA. 2005. Fundamental investigations on the spark plasma sintering/synthesis process. I. Effect of DC pulsing on reactivity. Mater. Sci. Eng. A 394:139-148 (Pubitemid 40599286)
16. Anselmi-Tamburini U, Gennari S, Garay JE, Munir ZA. 2005. Fundamental investigations on the spark plasma sintering/synthesis process. II. Modeling of current and temperature distributions. Mater. Sci. Eng. A 394:132-138
17. Ho PS, Kwok T. 1989. Electromigration in metals. Prog. Phys. 52(3):301-398
18. Anselmi-Tamburini U, Garay JE, Munir ZA. 2005. Fundamental investigations on the spark plasma sintering/synthesis process. III. Current effect on reactivity. Mater. Sci. Eng. A 407:24-30
19. Garay JE, Anselmi-Tamburini U, Munir ZA. 2003. Enhanced growth of intermetallic phases in theNi-Ti system by current effects. Acta Mater. 51:4487-4495
20. Garay JE, Glade SC, Anselmi-Tamburini U, Asoka-Kumar P, Munir ZA. 2004. Electric current enhanced defect mobility in Ni3Ti intermetallics. Appl. Phys. Lett. 85(4):573-575
21. Zhao J, Garay JE, Anselmi-Tamburini U, Munir ZA. 2007. Directional electromigration-enhanced interdiffusion in the Cu-Ni system. J. Appl. Phys. 102:114902
22. Hulbert DM, Anders A, Dudina DV, Andersson J, Jiang D et al. 2008. The absence of plasma in "spark plasma sintering." J. Appl. Phys. 104:033305
23. Olevsky EA, Froyen L. 2009. Impact of thermal diffusion on densification during SPS. J. Am. Ceram. Soc. 92(S1):S122-32
24. Locci AM, Orr ̀u R, Cao G, Munir ZA. 2003. Field-activated pressure-assisted synthesis of NiTi. Intermetallics 11:555-571
25. Orr̀u R,Woolman J, Cao G, Munir ZA. 2001. Synthesis of dense nanometric MoSi2 through mechanical and field activation. J. Mater. Res. 16:1439-1448
26. Paris S,GaffetE,Bernard F, MunirZA. 2004. Spark plasma synthesis frommechanically activated powders: a versatile route for producing dense nanostructured iron aluminides. Scr. Mater. 50:691-696
27. Ye J, Ajdelszajn L, Scoenhung JM. 2006. Bulk nanocrystalline aluminum 5083 alloy fabricated by a novel technique: cryomilling and spark plasma sintering. Metall. Mater. Trans. A 37:2569-2579
28. Zuniga A, Ajdelsztajn L, Lavernia EJ. 2006. Spark plasma sintering of a nanocrystalline Al-Cu-Mg-Fe- Ni-Sc alloy. Metall. Mater. Trans. A 37:1343-1352
29. Mitoseriu L, Harnagea C, Nannia P, Testino A, Buscaglia MT et al. 2004. Local switching properties of dense nanocrystalline BaTiO3 ceramics. Appl. Phys. Lett. 84:2418-2421
30. Casolco SR,Xu J,Garay JE. 2008. Transparent/translucent polycrystalline nanostructured yttria stabilized zirconia with varying colors. Scr. Mater. 58:516-519
31. Do Kim Y, Chung JY, Kim J, Jeon H. 2000. Formation of nanocrystalline Fe-Co powders produced by mechanical alloying. Mater. Sci. Eng. A 291:17-21
32. Shen Z, Zhao Z, Peng H, Nygren M. 2002. Formation of tough interlocking microstructures in silicon nitride ceramics by dynamic ripening. Nature 417:266-269
33. Zhan GD, Kuntz JE, Wan J,Mukherjee AK. 2003. Single-wall carbon nanotubes as attractive toughening agents in alumina based nanocomposites. Nat. Mater. 2:38-42
34. Kim HC, Shon IJ, Garay JE, Munir ZA. 2004. Consolidation and properties of binderless submicron tungsten carbide by field-activated sintering. Int. J. Refract. Met. Hard Mater. 22:257-264
35. Xiong Y, Fu ZY, Wang H. 2006. Microstructural effects on the transmittance of translucent AlN ceramics by SPS. Mater. Sci. Eng. B 128:7-10
36. Chaim R, Marder-Jaeckel R, Shen JZ. 2006. Transparent YAG ceramics by surface softening of nanoparticles in spark plasma sintering. Mater. Sci. Eng. A 429:74-78
37. Kim BN, Hiraga K, Morita K, Yoshida H. 2007. Spark plasma sintering of transparent alumina. Scr. Mater. 57:607-610
38. Sinha K, Pearson B, Casolco SR, Garay JE, Graeve OA. 2009. Synthesis and consolidation of BaAl2Si2O8:Eu: development of an integrated process for luminescent smart ceramic materials. J. Am. Ceram. Soc. 92:2504-2511
39. Wang X-J, Tang M-B, Chen H-H, Yang X-X, Zhao J-T et al. 2009. Synthesis and high thermoelectric efficiency of Zintl phase YbCd2?xZnxSb2. Appl. Phys. Lett. 94:092106
40. Chen LD, Huang XY, Zhou M, Shi X, Zhang WB. 2006. The high temperature thermoelectric performances of Zr0.5Hf0.5Ni0.8Pd0.2Sn0.99Sb0.01 alloy with nanophase inclusions. J. Appl. Phys. 99:064305
41. Anselmi-Tamburini U, Maglia F, Chiodelli G, Riello P, Bucella S, Munir ZA. 2006. Enhanced lowtemperature protonic conductivity in fully dense nanometric cubic zirconia. Appl. Phys. Lett. 89:163116
42. Kim S, Anselmi-Tamburini U, Park HJ, Martin M, Munir ZA. 2008. Unprecedented room-temperature electrical power generation using nanoscale fluorite-structured oxide electrolytes. Adv. Mater. 20:556-559
43. Yue M, Zhang J, Tian M. 2006. Microstructure and magnetic properties of isotropic bulk NdxFe94?xB6 (x = 6,8,10) nanocomposite magnets prepared by spark plasma sintering. J. Appl. Phys. 99:08B502
44. Morales JR, Garay JE, BiasiniM, BeyermannWP.2008. Magnetic characterization of bulk nanostructured iron oxides. Appl. Phys. Lett. 93:022511
45. Morales JR, Tanju S, Beyermann WP, Garay JE. 2010. Exchange bias in large three dimensional iron oxide nanocomposites. Appl. Phys. Lett. 96:013102
46. Zavaliangos A, Zhang J, Krammer M, Groza JR. 2004. Temperature evolution during field activated sintering. Mater. Sci. Eng. A 379:218-228
47. Vanmeensel K, Laptev A, Hennicke J, Vleugels J, Van Der Biest O. 2005. Modelling of the temperature distribution during field assisted sintering. Acta Mater. 53:4379-4388
48. Olevsky E, Froyen L. 2006. Constitutive modeling of spark-plasma sintering of conductive materials. Scr. Mater. 55:1175-1178
49. Zhan GD, Garay JE, Mukherjee AK. 2005. Ultralow-temperature superplasticity in nanoceramic composites. Nano Lett. 5:2593-2597
50. Jiang D, Hilbert DM, Kuntz JD, Anselmi-Tamburini U, Mukherjee AK. 2007. Spark plasma sintering: a high strain rate low temperature forming tool for ceramic. Mater. Sci. Eng. A 463:89-93