Rheological and morphological properties of PA6/ECO nanocomposites

Rheologica Acta

Volumn 49, Issue 10, 2010, Pages 1015-1027

  Taghizadeh, Ehsan ^a   Naderi, Ghasem ^a   Dubois, Charles ^b  

^a IRAN POLYMER AND PETROCHEMICAL INSTITUTE   (Iran)

^b DEPARTMENT OF CHEMICAL ENGINEERING   (Canada)

Author keywords

Morphology; Nanocomposite; Poly(epichlorohydrin co ethylene oxide); Polyamide 6; Rheology

Indexed keywords

EID: 77956969900     PISSN: 00354511     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00397-010-0476-3     Document Type: Article

References (51)

1. Agarwal S, Salovey R (1995) Model filled polymers. XV: the effects of chemical interactions and matrix molecular weight on rheology. Polym Eng Sci 35: 1241-1251.
2. Aubry T, Razafinimaro T, Médéric P (2005) Rheological investigation of the melt state elastic and yield properties of a polyamide-12 layered silicate nanocomposite. J Rheol 49: 425-440.
3. Ayyer RK, Leonov AI (2004) Comparative rheological studies of polyamide-6 and its low loaded nanocomposite based on layered silicates. Rheol Acta 43: 283-292.
4. Bardollet P, Bousmina M, Muller R (1995) Relationship between structure and rheological properties in the melt of polymers containing spherical inclusions. Polym Adv Technol 6: 301-308.
5. Bousmina M, Mullera R (1993) Linear viscoelasticity in the melt of impact PMMA. Influence of concentration and aggregation of dispersed rubber particles. J Rheol 37: 663-679.
6. Bousmina M, Bataille P, Sapieha S, Schreiber HP (1995) Comparing the effect of corona treatment and block copolymer addition on rheological properties of polystyrene/polyethylene blends. J Rheol 39: 499-517.
7. Carreau PJ, De-Kee DCR, Chhabra RP (1997) Rheology of polymeric systems: principles and applications. Hanser, Munich.
8. Cassagnau P, Melis F (2003) Non-linear viscoelastic behaviour and modulus recovery in silica filled polymers. Polymer 44: 6607-6615.
9. Chavarria F, Paul DR (2004) Comparison of nanocomposites based on nylon 6 and nylon 66. Polymer 45: 8501-8515.
10. Dick JS (2001) Rubber technology: compounding and testing for performance. Hanser, New York.
11. Filippone G, Dintcheva NT, Acierno D, La Mantia FP (2008) The role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends. Polymer 49: 1312-1322.
12. Fornes TD, Yoon PJ, Hunter DL, Keskkula H, Paul DR (2002) Effect of organoclay structure on nylon 6 nanocomposite morphology and properties. Polymer 43: 5915-5933.
13. Gahleitner M, Kretzschmar B, Vliet GV, Devaux J, Pospiech D, Bernreitner K, Ingolic E (2006) Rheology/morphology interactions in polypropylene/polyamide-6 nanocomposites. Rheol Acta 45: 322-330.
14. Galgali G, Ramesh C, Lele A (2001) A Rheological study on the kinetics of hybrid formation in polypropylene nanocomposites. Macromolecules 34: 852-858.
15. Graebling D, Muller R (1990) Rheological behavior of polydimethylsiloxane/polyoxyethylene blends in the melt. Emulsion model of two viscoelastic liquids. J Rheol 34: 193-205.
16. Graebling D, Muller R, Palierne JF (1993) Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids. Macromolecules 26: 320-329.
17. Han CD, Chuang HK (1985) Criteria for rheological compatibility of polymer blends. J Appl Polym Sci 30: 4431-4454.
18. Hong JS, Kim YK, Ahn KH, Lee SJ, Kim C (2007) Interfacial tension reduction in PBT/PE/clay nanocomposite. Rheol Acta 46: 469-478.
19. Huitric J, Ville J, Mederic P, Moan M, Aubry T (2009) Rheological, morphological and structural properties of PE/PA/nanoclay ternary blends: effect of clay weight fraction. J Rheol 53: 1101-1119.
20. Jang BN, Costache M, Wilkie CA (2005) The relationship between thermal degradation behavior of polymer and the fire retardancy of polymer/clay nanocomposites. Polymer 46: 10678-10687.
21. Kashiwagi T, Mu M, Winey K, Cipriano B, Raghavan SR (2008) Relation between the viscoelastic and flammability properties of polymer nanocomposite. Polymer 49: 4358-4368.
22. Kohan MI (1995) Nylon plastic handbook. Hanser, Munich.
23. Krishnamoorti R, Giannelis EP (1997) Rheology of end-tethered polymer layered silicate nanocomposites. Macromolecules 30: 4097-4102.
24. Lertwimolnun W, Vergnes B (2005) Influence of compatibilizer and processing conditions on the dispersion of nanoclay in a polypropylene matrix. Polymer 46: 3462-3471.
25. Letwimolnun W, Vergnes B, Ausias G, Carreau PJ (2007) Stress overshoots of organoclay nanocomposites in transient shear flow. J Non-Newtonian Fluid Mech 141: 167-179.
26. Lim YT, Park OO (2001) Phase morphology and rheological behavior of polymer/layered silicate nanocomposites. Rheol Acta 40: 220-229.
27. Marguerat F, Carreau PJ, Michel A (2002) Morphology and rheological properties of polypropylene/reactive elastomer blends. Polym Eng Sci 42: 1941-1955.
28. Naderi G, Lafleur PG, Dubois C (2008) The influence of matrix viscosity and composition on the morphology, rheology, and mechanical properties of thermoplastic elastomer nanocomposites based on EPDM/PP. Polym Compos 29: 1301-1309.
29. Naderi G, Razavi-Nouri M, Taghizadeh E, Lafleur PG, Dubois C (2010) Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/polyepichlorohydrin-co-ethylene oxide. Polym Eng Sci. doi: 10. 1002/pen. 21824.
30. Pal R (2000) Linear viscoelastic behavior of multiphase dispersions. J Colloid Interface Sci 232: 50-63.
31. Palierne JE (1990) Linear rheology of viscoelastic emulsions with interfacial tension. Rheol Acta 29: 204-214.
32. Pandey JK, Reddy KR, Kumar AP, Singh RP (2005) An overview on the degradability of polymer nanocomposites. Polym Degrad Stab 88: 234-250.
33. Paul DR, Robeson LM (2008) Polymer nanotechnology: nanocomposites. Polymer 49: 3187-3204.
34. Pavlidou S, Papaspyrides CD (2008) A review on polymer-layered silicate nanocomposites. Prog Polym Sci 33: 1119-1198.
35. Rastogi AK, Pierre LES (1969) Interfacial phenomena in macromolecular systems III. The surface free-energies of polyethers. J Colloid Interface Sci 31: 168-175.
36. Ray SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28: 1539-1641.
37. Ren J, Silva AS, Krishnamoorti R (2000) Linear viscoelasticity of disordered polystyrene-polyisoprene block copolymer based layered-silicate nanocomposites. Macromolecules 33: 3739-3746.
38. Rodlert M, Plummer CJG, Garamszegi L, Leterrier Y, Grunbauer HJM, Manson JAE (2004) Hyperbranched polymer/montmorillonite clay nanocomposites. Polymer 45: 949-960.
39. Rohlmann CO, Failla MD, Quinzani LM (2006) Linear viscoelasticity and structure of polypropylene-montmorillonite nanocomposites. Polymer 47: 7795-7804.
40. Romeo G, Filippone G, Fernández-Nieves A, Russo P, Acierno D (2008) Elasticity and dynamics of particle gels in non-Newtonian melts. Rheol Acta 47: 989-997.
41. Rosedale JH, Bates FS (1990) Rheology of ordered and disordered symmetric poly(ethylenepropylene)-poly(ethylethylene) diblock copolymers. Macromolecules 23: 2329-2338.
42. Sailer C, Handge UA (2007) Melt viscosity, elasticity, and morphology of reactively compatibilized polyamide 6/styrene-acrylonitrile blends in shear and elongation. Macromolecules 40: 2019-2028.
43. Shi D, Ke Z, Yang J, Gao Y, Wu J, Yin J (2002) Rheology and morphology of reactively compatibilized PP/PA6 blends. Macromolecules 35: 8005-8012.
44. Sikdar D, Katti DR, Katti KS, Bhowmik R (2006) Insight into molecular interactions between constituents in polymer clay nanocomposites. Polymer 47: 5196-5205.
45. Son Y (2001) Measurement of interfacial tension between polyamide-6 and poly(styrene-co-acrylonitrile) by breaking thread method. Polymer 42: 1287-1291.
46. Utracki LA, Jorgesen JL (2002) Dynamic melt flow of nanocomposites based on poly-ε-caprolactam. Rheol Acta 41: 394-407.
47. Vaia RA, Jandt KD, Kramer EJ, Giannelis EP (1995) Kinetics of polymer melt intercalation. Macromolecules 28: 8080-8085.
48. Vinogradov GC, Malkin AY, Plotnikova EP, Sabsai OU, Nikolayava NE (1972) Viscoelastic properties of filled polymers. Intern J Polymeric Mater 2: 1-27.
49. Wu S (1982) Polymer interface and adhesion. Marcel & Dekker, New York.
50. Xu B, Zheng Q, Song Y, Shangguan Y (2006) Calculating barrier properties of polymer/clay nanocomposites: effects of clay layers. Polymer 47: 2904-2910.
51. Zhang J, Jiang DD, Wilkie CA (2006) Fire properties of styrenic polymer-clay nanocomposites based on an oligomerically-modified clay. Polym Degrad Stab 91: 358-366.