Critical heat flux and pressure drop of subcooled flow boiling in small-diameter tubes with twisted-tape inserts

Journal of Enhanced Heat Transfer

Volumn 3, Issue 2, 1996, Pages 95-108

  Tong, W ^a,b   Bergles, A E ^a   Jensen, M K ^a  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

^b BABCOCK AND WILCOX COMPANY   (United States)

Author keywords

Critical heat flux; Pressure drop; Subcooled flow boiling; Twisted tape insert

Indexed keywords

FLOW OF FLUIDS; HEAT EXCHANGERS; HEAT FLUX; HEAT TRANSFER; INTAKE SYSTEMS; PRESSURE DROP;

CRITICAL HEAT FLUX; MASS FLUX; SUBCOOLED FLOW BOILING; TWISTED TAPE INSERTS;

TUBES (COMPONENTS);

EID: 0029735649     PISSN: 10655131     EISSN: None     Source Type: Journal    
DOI: 10.1615/JEnhHeatTransf.v3.i2.30     Document Type: Article

References (33)

1. Bergles, A. E., 1963. Subcooled Burnout in Tubes of Small Diameter, ASME paper 63-WA-182.
2. Bergles, A. E., 1985. Techniques to Augment Heat Transfer, Handbook of Heat Transfer Applications, Eds. Rohsenow, W. M., et al., 2nd Edition, McGraw-Hill, New York.
3. Blatt, T. A. and Adt Jr, R. R., 1963. The Effects of Twisted Tape Swirl Generators on the Heat Transfer Rate and Pressure Drop of Boiling Freon 11 and Water, ASME Paper 63-WA-42.
4. Bolla, G., Giorgio, G. De, and Pedrocchi, E., 1973. Heat Transfer and Pressure Drop Comparison in Tubes with Transverse Ribs and with Twisted Tape, Energia Nucleare, Vol. 20, pp. 604-613.
5. Celata, G. P., 1993. Recent Achievements in the Thermal Hydraulics of High Heat Flux Components in Fusion Reactors, Experimental Thermal and Fluid Science, Vol. 7, pp. 263-278.
6. Cochran, W. C., 1967. "Anodizing", Aluminum, edited by R. V. Horn, Vol. 3 Fabrication and Finishing), American Society for Metals pp. 641-684.
7. Collier, J. G., 1972. Convective Boiling and Condensation, 2nd edition, McGraw-Hill, London.
8. Daleas, R. S. and Bergles, A. E., 1965. Effects of Upstream Compressibility on Subcooled Critical Heat Flux, ASME Paper 65-HT-67.
9. Drizius, M.-R. M., Skema, R. K. and Slanciauskas, A. A., 1978. Boiling Crisis in Swirled Flow of Water in Pipes, Heat Transfer-Soviet Research, Vol. 10, No. 4, pp. 1-7.
10. Feinstein, L. and Lundberg, R. E., 1963. Fluid friction and Boiling Heat Transfer with Water in Vortex Flow in Tubes Containing an Internal Twisted Tape, Rome Air Development Center Report RADC-TDR-63-451.
11. Gambill, W. R., Bundy, R. D. and Wansbrough, R. W., 1961. Heat Transfer, Burnout, and Pressure Drop for Water in Swirl Flow Though Tubes with Internal Twisted Tapes, Chemical Engineering Progress Symposium Series, Vol. 57, No. 32, pp. 127-137.
12. Gaspari, G. P. and Cattadori, G., 1994. Subcooled Flow Boiling Burnout in Tubes with and without Turbulence Promoters, Experimental Thermal and Fluid Science, Vol. 8, pp. 28-34.
13. Inasaka, F. and Nariai, H., 1992. Evaluation of Subcooled Critical Heat Flux Correlations for Tubes with and without Internal Twisted Tapes, Proc. 5th Int. Topical Meeting on Reactor Thermal Hydraulics, Vol. 4, pp. 919-928.
14. Inasaka, F., Nariai, H., Fujisaki, W., and Ishiguro, H., 1992. Critical Heat Flux of Subcooled Boiling with Twisted-Tape Swirl Flow at Atmospheric Pressure (in Japanese), Transactions of the Japan Society of Mechanical Engineering, Vol. 58, pp. 216-222.
15. Inasaka, F., Nariai, H., Fujisaki, W. and Ishiguro, H., 1991. Critical Heat Flux of Subcooled Flow Boiling in Tubes with Internal Twisted Tape, Proc. ASME/JSME Thermal Engineering Joint Conf., Vol. 2, pp. 65-70.
16. Inasaka, F. and Nariai, H., 1987. Critical Heat Flux and Flow Characteristics of Subcooled Flow Boiling in Narrow Tubes, JSME International Journal, Vol. 30, pp. 1595-1600.
17. Lopina, R. F. and Bergles, A. E., 1967. Heat Transfer and Pressure-Drop in Tape Generated Swirl Flow, Massachusetts Institute Technology Report Number DSR 70281-47.
18. Lopina, R. F. and Bergles, A. E., 1969. Heat Transfer and Pressure-Drop in Tape Generated Swirl Flow of Single-Phase Water, Journal of Heat Transfer, Vol. 91, pp. 434-442.
19. Lopina, R. F. and Bergles, A. E., 1973. Subcooled Boiling of Water in Tape-Generated Swirl Flow, Journal of Heat Transfer, Vol. 95, pp. 281-283.
20. Manglik, R. M. and Bergles, A. E., 1993. Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part I - Laminar Flows, Journal of Heat Transfer, Vol. 115, pp. 881-889.
21. Manglik, R. M. and Bergles, A. E., 1993. Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part II - Transition and Turbulent Flows, Journal of Heat Transfer, Vol. 115, pp. 890-896.
22. Maulbetsch, J. S. and Griffith, P., 1966. A Study of System-Induced Instabilities in Forced-Convective Flows with Subcooled Boiling, Proc. 3rd Heat Transfer Conference, Vol. 4, pp. 247-257.
23. Nariai, H., Inasaka, F., Fujisaki, W. and Ishiguro, H., 1991. Critical Heat Flux of Subcooled Flow Boiling in Tubes with Internal Twisted Tapes, Proc. ANS Winter Meeting, pp. 38-46.
24. Raymond, A., 1965. Practical Applications of Anodic Coatings in Nameplate Manufacture, Electrochemistry, Eds. J. A. Friend and F. Gutmann, Pergamon Press, Oxford, pp. 392-398.
25. Saha, S. K., Gaitonde, U. N. and Date, A. W., 1989. Heat Transfer and Pressure Drop Characteristics of Laminar Flow in a Circular Tube Fitted with Regularly Spaced Twisted-Tape Elements, Experimental Thermal and Fluid Science, Vol. 2, pp. 310-322.
26. Saha, S. K., Gaitonde, U. N. and Date, A. W., 1989. Heat Transfer and Pressure Drop Characteristics of Turbulent Flow in a Circular Tube Fitted with Regularly Spaced Twisted-Tape Elements, Experimental Thermal and Fluid Science, Vol. 3, pp. 632-640.
27. Smithberg, E. and Landis, F., 1964. Friction and Forced Convection Heat-Transfer Characteristics in Tubes with Twisted Tape Swirl Generators, Journal of Heat Transfer, Vol. 86, pp. 39-49.
28. Thorsen, R. and Landis, F., 1968. Friction and Heat Transfer Characteristics in Turbulent Swirl Flow Subjected to Large Transverse Temperature Gradients, Journal of Heat Transfer, Vol. 90, pp. 87-97.
29. Vandervort, C. L., Bergles, A. E. and Jensen, M. K., 1994. An Experimental Study of Critical Heat Flux in Very High Heat Flux Subcooled Boiling, International Journal of Heat and Mass Transfer, Vol. 37, Suppl. 1, pp. 161-173.
30. Webb, R. L., 1994, Principles of Enhanced Heat Transfer, John Wiley, New York.
31. Weisman, J. and Pei, B. S., 1983. Prediction of Critical Heat Flux in Flow Boiling at Low Qualities, International Journal of Heat and Mass Transfer, Vol. 26, pp. 1463-1478.
32. Weisman, J. and Illeslamlou, S., 1988. A Phenomenological Model for Prediction of Critical Heat Flux under High Subcooling Conditions, Fusion Technology, Vol. 13, pp. 654-659.
33. Weisman, J. Yang, J. Y. and Usman, S., 1994. A Phenomenological Model for Boiling Heat Transfer and the Critical Heat Flux in Tubes Containing Twisted Tapes, International Journal of Heat and Mass Transfer, Vol. 37, pp. 69-80.