Synthesis of bio-based polymeric nanocomposites from acrylated epoxidized soybean oil and montmorillonite clay in the presence of a bio-based intercalant

Polymer International

Volumn 59, Issue 8, 2010, Pages 1122-1129

  Şen, Sinan ^a   Çayli, Gökhan ^a  

^a BOGAZICI UNIVERSITY   (Turkey)

Author keywords

Acrylated epoxidized soybean oil; Mechanical properties; Montmorillonite; Nanocomposite

Indexed keywords

ACRYLATED EPOXIDIZED SOYBEAN OIL; BIO-BASED; DYNAMIC MECHANICAL PERFORMANCE; EXFOLIATED NANOCOMPOSITES; FUNCTIONALIZED; IN-SITU; INTERCALANTS; INTERCALATED NANOCOMPOSITES; METHYL OLEATE; MONTMORILLONITE; MONTMORILLONITE CLAY; NANOFILLER; OLIVE OIL; ORGANOPHILIC; POLYMERIC NANOCOMPOSITES; RADICAL POLYMERIZATION; THERMAL AND MECHANICAL PROPERTIES; THERMAL STABILITY;

ATOMIC FORCE MICROSCOPY; CLAY MINERALS; DYNAMIC ANALYSIS; DYNAMIC MECHANICAL ANALYSIS; DYNAMICS; FREE RADICAL POLYMERIZATION; FREE RADICALS; FUNCTIONAL POLYMERS; LOADING; MECHANICAL PROPERTIES; NANOCOMPOSITES; SILICATE MINERALS; STYRENE; SYNTHESIS (CHEMICAL); THERMOGRAVIMETRIC ANALYSIS; VEGETABLE OILS; X RAY DIFFRACTION;

POLYMER MATRIX COMPOSITES;

EID: 77956481563     PISSN: 09598103     EISSN: 10970126     Source Type: Journal    
DOI: 10.1002/pi.2838     Document Type: Article

References (35)

1. Ray SS and Okamato M, Prog Polym Sci 28:1539 (2003).
2. Okada A, Kawasumi M, Usuki A, Kojima Y, Kurauchi T and Kamigaito O, Mater Res Soc Proc 171:45 (1990).
3. Wang Z and Pinnavaia TJ, Chem Mater 10:1820 (1998).
4. Şen S, Nugay Nand Nugay T, Polym Int 55:552 (2006).
5. Fischer HR, Gielgens LH and Koster TPM, Acta Polym 50:122 (1999).
6. Şen S, Nugay Nand Nugay T, e-Polymers 049 (2003).
7. Biasci L, Aglietto MM, Ruggeri G and Ciardelli F, Polymer 35:3296 (1994).
8. Vaia R, Ishii AH and Giannelis EP, Chem Mater 5:1694 (1993).
9. Yano K, Usuki A and Okada A, J Polym Sci A: Polym Chem 35:2289 (1997).
10. Messersmith PB and Giannelis EP, Chem Mater 6:1719 (1994).
11. Wang Z and Pinnavia TJ, Chem Mater 10:3769 (1998).
12. Liu K, Soybeans: Chemistry, Technology, and Utilization. Chapman & Hall, London (1997).
13. Lu J, Hong CK and Wool RP, J Polym Sci B: Polym Phys 42:1441 (2004).
14. Hong CK and Wool RP, J Appl Polym Sci 95:1524 (2005).
15. Lu J, Khot S and Wool RP, Polymer 46:71 (2005).
16. O'Donnel A, Dweib MA and Wool RP, Compos Sci Technol 64:1135 (2004).
17. Altuntas E, Cayli G, Kusefoglu S and Nugay N, Designed Monom Polym 11:371 (2008).
18. Miyagawa H, Mohanty A, Drzal LT and Misra M, Ind Eng Chem Res 43:7001 (2004).
19. Uyama H, Kuwabara M, Tsujimoto T, Nakano M, Usuki A and Kobayashi S, Macromol Biosci 4:354 (2004).
20. Song B, Chen W, Liu Z and Erhan S, Int J Plasticity 22:1549 (2006).
21. Haq M, Burgueno R, Mohanty AK and Misra M, Compos Sci Technol 68:3344 (2008).
22. Liu Z, Erhan SZ and Xu J, Polymer 46:10119 (2005).
23. Cayli G and Kusefoglu S, Fuel Process Technol 89:118 (2008).
24. Cayli G and Kusefoglu S, J Appl Polym Sci 109:2948 (2008).
25. Alexandre M and Dubois P, Mater Sci Eng R Rep 28:1 (2000).
26. Tanabe T, Koinuma H and Hirai H, J Polym Sci 19:3293 (1981).
27. USPM Instruction Manual Version 5. Ambios Technology, Santa Cruz, CA (2007).
28. Ganguly A, Sarkar MD and Bhowmick AK, J Polym Sci B: Polym Phys 45:52 (2007).
29. Zilg C, Mülhaupt R and Finter J, Macromol Chem Phys 200:661 (1999).
30. Reichert P, Nitz H, Klinke S, Brandsch R, Thomann R and Mülhaupt R, Macromol Mater Eng 275:8 (2000).
31. Leszczynska A, Njuguna J, Pielichowski Kand Banerjee JK, Thermochim Acta 453:75 (2007).
32. Paris R and Fuente JL, React Funct Polym 67:264 (2007).
33. Venkatesh R, Vergouwen F and Klumperman B, J Polym Sci A: Polym Chem 42:3271 (2004).
34. Noh MW and Lee DC, Polym Bull 42:619 (1999).
35. Landry CJT, Coltrain BK and Landry MR, Macromolecules 26:3702 (1993).