Curvature and strength of Ni-YSZ solid oxide half-cells after RedOx treatments

Journal of Fuel Cell Science and Technology

Volumn 7, Issue 5, 2010, Pages 0510111-0510117

  Faes, Antonin ^a   Frandsen, Henrik Lund ^b   Pihlatie, Mikko ^b   Kaiser, Andreas ^b   Goldstein, Darlene R ^a  

^a EPFL   (Switzerland)

^b TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Anode supported SOFC; Curvature; RedOx; Strength

Indexed keywords

ANODE SUPPORTED CELL; ANODE-SUPPORTED; ANODE-SUPPORTED SOFCS; BEFORE AND AFTER; CURVATURE; LASER-CUT; NI-YSZ ANODE; REDOX; REDOX CYCLES; REDOX TREATMENTS; REDUCTION TEMPERATURES; RING METHOD; SOLID OXIDE; STRENGTH; YSZ ELECTROLYTES;

YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

SOLID OXIDE FUEL CELLS (SOFC);

EID: 77956380315     PISSN: 1550624X     EISSN: 15516989     Source Type: Journal    
DOI: 10.1115/1.4001019     Document Type: Article

References (30)

1. Larrain, D., Van Herle, J., and Favrat, D., 2006, "Simulation of SOFC Stack and Repeat Elements Including Interconnect Degradation and Anode Reoxidation Risk", J. Power Sources, 161(1), pp. 392-403.
2. Yang, Z., Weil, K. S., Paxton, D. M., and Stevenson, J. W., 2003, "Selection and Evaluation of Heat-Resistant Alloys for SOFC Interconnect Applications", J. Electrochem. Soc., 150(9), pp. A1188-A1201.
3. Yokokawa, H., Sakai, N., Kawada, T., and Dokiya, M., 1990, "Thermodynamic Analysis on Interface Between Perovskite Electrode and YSZ Electrolyte", Solid State Ionics, 40-41 (Pt 1), pp. 398-401.
4. Lee, H. Y., and Oh, S. M., 1996, "Origin of Cathodic Degradation and New Phase Formation at the La0.9Sr0.1MnO3/YSZ Interface", Solid State Ionics, 90 (1-4), pp. 133-140.
5. Pujare, N. U., Semkow, K. W., and Sammells, A. F., 1987, "A Direct H2S/Air Solid Oxide Fuel Cell", J. Electrochem. Soc., 134(10), pp. 2639-2640.
6. Zha, S., Cheng, Z., and Liu, M., 2007, "Sulfur Poisoning and Regeneration of Ni-Based Anodes in Solid Oxide Fuel Cells", J. Electrochem. Soc., 154(2), pp. B201-B206.
7. Simwonis, D., Tietz, F., and Stoever, D., 2000, "Nickel Coarsening in Annealed Ni/8YSZ Anode Substrates for Solid Oxide Fuel Cells", Solid State Ionics, 132 (3-4), pp. 241-251.
8. Faes, A., Hessler-Wyser, A., Presvytes, D., Vayenas, C. G., and Van Herle, J., 2009, "Nickel-Zirconia Anode Degradation and Triple Phase Boundary Quantification from Microstructural Analysis", Fuel Cells, 9(6), pp. 841-851.
9. Taniguchi, S., Kadowaki, M., Kawamura, H., Yasuo, T., Akiyama, Y., Miyake, Y., and Saitoh, T., 1995, "Degradation Phenomena in the Cathode of a Solid Oxide Fuel Cell With an Alloy Separator", J. Power Sources, 55(1), pp. 73-79.
10. Yokokawa, H., Horita, T., Sakai, N., Yamaji, K., Brito, M. E., Xiong, Y. P., and Kishimoto, H., 2006, "Thermodynamic Considerations on Cr Poisoning in SOFC Cathodes", Solid State Ionics, 177 (35-36), pp. 3193-3198.
11. Hattori, M., Takeda, Y., Sakaki, Y., Nakanishi, A., Ohara, S., Mukai, K., Lee, J. H., and Fukui, T., 2004, "Effect of Aging on Conductivity of Yttria Stabilized Zirconia", J. Power Sources, 126 (1-2), pp. 23-27.
12. Haering, C., Roosen, A., and Schichl, H., 2005, "Degradation of the Electrical Conductivity in Stabilised Zirconia Systems Part I: Yttria-Stabilised Zirconia", Solid State Ionics, 176 (3-4), pp. 253-259.
13. Pihlatie, M., Kaiser, A., Larsen, P. H., and Mogensen, M., 2009, "Dimensional Behaviour of Ni-YSZ Composites During Redox Cycling", J. Electrochem. Soc., 156(3), pp. B322-B329.
14. Pihlatie, M., Kaiser, A., Larsen, P. H., and Mogensen, M., 2007, "Dimensional Behaviour of Ni-YSZ Anode Supports for SOFC Under RedOx Cycling Conditions", ECS Trans., 7(1), pp. 1501-1510.
15. CRC, 1973, CRC Handbook of Chemistry and Physics, 53rd ed., CRC, Cleveland.
16. Wuillemin, Z., Autissier, N., Nakajo, M., Luong, M., Van Herle, J., and Favrat, D., 2008, "Modeling and Study of the Influence of Sealing on a Solid Oxide Fuel Cell", ASME J. Fuel Cell Sci. Technol., 5(1), p. 011016.
17. Kirstein, A. F., and Woolley, R. M., 1967, "Symmetrical Bending of Thin Circular Elastic Plates on Equally Spaced Point Supports", J. Res. Natl. Bur. Stand., 71 C (1), pp. 1-10.
18. Sørensen, B. F., Sarraute, S., Jørgensen, O., and Horswell, A., 1998, "Thermally Induced Delamination of Multilayers", Acta Mater., 46(8), pp. 2603-2615.
19. Mori, M., Yamamoto, T., Itoh, H., Inaba, H., and Tagawa, H., 1998, "Thermal Expansion of Nickel-Zirconia Anodes in Solid Oxide Fuel Cells During Fabrication and Operation", J. Electrochem. Soc., 145(4), pp. 1374-1381.
20. Atkinson, A., and Selçuk, A., 1999, "Residual Stress and Fracture of Laminated Ceramic Membranes", Acta Mater., 47(3), pp. 867-874.
21. Weibull, W., 1951, "A Statistical Distribution Function of Wide Applicability", ASME J. Appl. Mech., 18(3), pp. 293-297.
22. Ramousse, S., Menon, M., Brodersen, K., Knudsen, J., Rahbek, U., and Larsen, P. H., 2007, "Manufacturing of Anode-Supported SOFC's: Processing Parameters and Their Influence", ECS Trans., 7(1), pp. 317-327.
23. Klemensoe, T., 2005, Relationships Between Structure and Performance of SOFC Anodes, Technical University of Denmark, Risoe National Laboratory, Topsoe Fuel Cell, Denmark.
24. Waldbillig, D., Wood, A., and Ivey, D. G., 2005, "Thermal Analysis of the Cyclic Reduction and Oxidation Behaviour of SOFC Anodes", Solid State Ionics, 176 (9-10), pp. 847-859.
25. Selçuk, A., and Atkinson, A., 1997, "Elastic Properties of Ceramic Oxides Used in Solid Oxide Fuel Cells (SOFC)", J. Eur. Ceram. Soc, 17(12), pp. 1523-1532.
26. Pihlatie, M., Kaiser, A., and Mogensen, M., 2009, "Mechanical Properties of NiO/Ni-YSZ Composites Depending on Temperature, Porosity and Redox Cycling", J. Eur. Ceram. Soc, 29(9), pp. 1657-1664.
27. Radovic, M., and Lara-Curzio, E., 2004, "Mechanical Properties of Tape Cast Nickel-Based Anode Materials for Solid Oxide Fuel Cells Before and After Reduction in Hydrogen", Acta Mater., 52(20), pp. 5747-5756.
28. Malzbender, J., Wessel, E., Steinbrech, R. W., and Singheiser, L., 2005, "Reduction and Re-Oxidation of Anodes for Solid Oxide Fuel Cells (SOFC)", 28th International Conference on Advanced Ceramics and Composites, A. E. Lara-Curzio and M. J. Readey, eds., The American Ceramic Society, Cocoa Beach, p. 378.
29. Faes, A., Nakajo, A., Hessler-Wyser, A., Dubois, D., Modena, S., Brisse, A., and Van Herle, J., 2009, "RedOx Study of Anode Supported Solid Oxide Fuel Cell", J. Power Sources, 193(1), pp. 55-64.
30. Pihlatie, M., Ramos, T., and Kaiser, A., 2009, "Testing and Improving the Redox Stability of Ni-Based Solid Oxide Fuel Cells", J. Power Sources, 193(1), pp. 322-330.