Recycling of fly ash for preparing porous mullite membrane supports with titania addition

Journal of Hazardous Materials

Volumn 180, Issue 1-3, 2010, Pages 173-180

  Dong, Yingchao ^a   Hampshire, Stuart ^a   Zhou, Jian er ^b   Lin, Bin ^c   Ji, Zhanlin ^a   Zhang, Xiaozhen ^c   Meng, Guangyao ^c  

^a UNIVERSITY OF LIMERICK   (Ireland)

^b JINGDEZHEN CERAMIC INSTITUTE   (China)

^c UNIVERSITY OF SCIENCE AND TECHNOLOGY OF CHINA   (China)

Author keywords

Ceramic membrane supports; Fly ash; Sintering; Titania; Waste recycling

Indexed keywords

BULK DENSITY; GLASSY PHASE; HIGH TEMPERATURE; LINEAR SHRINKAGE; LOW TEMPERATURES; LOW-HIGH; MEMBRANE SUPPORTS; MULLITE CERAMIC; MULLITIZATION TEMPERATURE; OPEN POROSITY; SINTERING ADDITIVES; SINTERING BEHAVIORS; SINTERING TEMPERATURES; THREE-POINT FLEXURAL STRENGTH; TIO; TITANIA; TITANIA CONTENT; WASTE RECYCLING;

ADDITIVES; ASHES; CALCINATION; CERAMIC MEMBRANES; FLY ASH; MULLITE; RECYCLING; SHRINKAGE; SILICATE MINERALS; TITANIUM DIOXIDE;

SINTERING;

ALUMINUM SILICATE; TITANIUM DIOXIDE; ALUMINOSILICIC ACID; CARBON; TITANIUM;

BAUXITE; BULK DENSITY; CERAMICS; FLY ASH; PORCELLANITE; POROSITY; POROUS MEDIUM; RECYCLING; TITANIUM; VISCOSITY;

ARTICLE; BULK DENSITY; CERAMICS; FLY ASH; HIGH TEMPERATURE; POLLUTION; POROSITY; RECYCLING; STRENGTH; TEMPERATURE DEPENDENCE; VISCOSITY; X RAY DIFFRACTION; CHEMISTRY; PARTICLE SIZE; PARTICULATE MATTER; SCANNING ELECTRON MICROSCOPY;

ALUMINUM SILICATES; CARBON; MICROSCOPY, ELECTRON, SCANNING; PARTICLE SIZE; PARTICULATE MATTER; TITANIUM; X-RAY DIFFRACTION;

EID: 77956217229     PISSN: 03043894     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2010.04.010     Document Type: Article

References (36)

1. Rincàn J.MA., Romero M., Boccaccni A.R. Microstructural characterisation of a glass and a glass-ceramic obtained from municipal incinerator fly ash. J. Mater. Sci. 1999, 34:4413-4423.
2. Peng F., Liang K.M., Hu A.M. Nano-crystal glass-ceramics obtained from high alumina coal fly ash. Fuel 2005, 84:341-346.
3. Károly Z., Mohai I., Tóth M., Wéber F., Szépvölgyi J. Production of glass-ceramics from fly ash using arc plasma. J. Eur. Ceram. Soc. 2007, 27:1721-1725.
4. Kim J.M., Kim H.S. Processing and properties of a glass-ceramic from coal fly ash from a thermal power plant through an economic process. J. Eur. Ceram. Soc. 2004, 24:2825-2833.
5. Kim J.M., Kim H.S. Glass-ceramic produced from a municipal waste incinerator fly ash with high Cl content. J. Eur. Ceram. Soc. 2004, 24:2373-2382.
6. He Y., Cheng W.M., Cai H.S. Characterization of α-cordierite glass-ceramics from fly ash. J. Hazard. Mater. 2005, 120:265-269.
7. Kumar S., Singh K.K., Ramachandrarao P. Synthesis of cordierite from fly ash and its refractory properties. J. Mater. Sci. 2000, 19:1263-1265.
8. Shao H., Liang K.M., Zhou F., Wang G.L., Peng F. Characterization of cordierite-based glass-ceramics produced from fly ash. J. Non-Cryst. Solids 2004, 337:157-160.
9. Dong Y.C., Liu X.Q., Ma Q.L., Meng G.Y. Preparation of cordierite-based porous ceramic micro-filtration membranes using waste fly ash as the main raw materials. J. Membr. Sci. 2006, 285:173-181.
10. Masmoudi S., Ben Amar R., Larbot A., El Feki H., Ben Salah A., Cot L. Elaboration of inorganic microfiltration membranes with hydroxyapatite applied to the treatment of wastewater from sea product industry. J. Membr. Sci. 2005, 247:1-9.
11. Khemakhem S., Ben Amar R., Larbot A. Synthesis and characterization of a new inorganic ultrafiltration membrane composed entirely of Tunisian natural illite clay. Desalination 2007, 206:210-214.
12. Weir M.R., Rutinduka E., Detellier C., Feng C.Y., Wang Q., Matsuura T., Le VanMao R. Fabrication, characterization and preliminary testing of all-inorganic ultra-filtration membranes composed entirely of a naturally occurring sepiolite clay mineral. J. Membr. Sci. 2001, 182:41-50.
13. Almandoza M.C., Marchese J., Prádanos P., Palacio L., Hernández A. Preparation and characterization of non-supported microfiltration membranes from aluminosilicates. J. Membr. Sci. 2004, 241:95-103.
14. Bentama J., Ouazzani K., Lakhliai Z., Ayadi M. Inorganic membranes made of sintered clay for the treatment of biologically modified water. Desalination 2004, 168:295-299.
15. Bentama J., Ouazzania K., Schmitzb P. Mineral membranes made of sintered clay: application to crossflow microfiltration. Desalination 2002, 146:57-61.
16. Hinkova A., Bohacenko I., Bubnik Z., Hrstkova M., Jankovska P. Mineral membrane filtration in refinement of starch hydrolysates. J. Food Eng. 2004, 61:521-526.
17. Liu Y.F., Liu X.Q., Wei H., Meng G.Y. Porous mullite ceramics from national clay produced by gel-casting. Ceram. Int. 2001, 27:1-7.
18. Zhang X.B., Jiang Y.Z., Liu X.Q., Meng G.Y. Sintering kinetics of ceramic from diatomite. J. Am. Ceram. Soc. 2005, 88:1826-1830.
19. Rakib S., Sghyar M., Rafiq M., Larbot A., Cot L. New porous ceramics for tangential filtration. Sep. Purif. Technol. 2001, 25:385-390.
20. Hulett L.D., Weinberger A.J., Northcutt K.J., Fergusone M. Chemical species in fly ash from coal-burning power plants. Science 1980, 210:1356-1358.
21. Dong Y.C., Feng X.Y., Feng X.F., Ding Y.W., Liu X.Q., Meng G.Y. Preparation of low-cost mullite ceramics from natural bauxite and industrial waste fly ash. J. Alloys Compd. 2008, 460:599-606.
22. Dong Y.C., Zhou J.E., Lin B., Wang Y.Q., Wang S.L., Miao L.F., Lang Y., Liu X.Q., Meng G.Y. Reaction-sintered porous mineral-based mullite ceramic membrane supports made from recycled materials. J. Hazard. Mater. 2009, 172:180-186.
23. Montanaro L., Perrot C., Esnouf C., Thollet G., Fantozzi G., Negro A. Sintering of industrial mullites in the presence of magnesia as a sintering aid. J. Am. Ceram. Soc. 2000, 83:189-196.
24. Doni Jayaseelan D., Amutha Rani D., Benny Anburaj D., Ohji T. Pulse electric current sintering and microstructure of industrial mullite in the presence of sintering aids. Ceram. Int. 2004, 30:539-543.
25. Kim Y.W., Kim H.D., Park C.B. Processing of microcellular mullite. J. Am. Ceram. Soc. 2005, 88:3311-3315.
26. Imose M., Ohta A., Takano Y., Yoshinaka M., Hirota K., Yamaguchi O. Low-temperature sintering of mullite/yttria-doped zirconia composites in the mullite-rich region. J. Am. Ceram. Soc. 1998, 81:1050-1052.
27. Sarin P., Yoon W., Haggerty R.P., Chiritescu C., Bhorkar N.C., Kriven W.M. Effect of transition-metal-ion doping on high temperature thermal expansion of 3:2 mullite-an in situ, high temperature, synchrotron diffraction study. J. Eur. Ceram. Soc. 2008, 28:353-365.
28. Caldwell M. Role of titania in bauxite refractories. Brit. Ceram. Soc. Trans. 1967, 66:107-119.
29. Zhong X.C., Li G.P. Sintering characteristics of Chinese bauxites. Ceram. Int. 1981, 7:65-68.
30. 2. J. Eur. Ceram. Soc. 1998, 18:2081-2087.
31. 3-doped aluminosilicate gels. J. Am. Ceram. Soc. 1997, 80:1551-1559.
32. 2 mullites obtained from single-phase gels. J. Eur. Ceram. Soc. 2007, 27:2647-2654.
33. 2 on sintering of sillimanite. Ceram. Int. 1994, 20:299-302.
34. Jakobs E., Koros W.J. Ceramic membrane characterization via the bubble point technique. J. Membr. Sci. 1997, 124:149-159.
35. Mackenzie J.J.K., Shuttleworth R. A phenomenological theory of sintering. Proc. Phys. Soc. Lond. 1949, 62:633-652.
36. 2 system. J. Eur. Ceram. Soc. 1996, 16:101-108.