Sodium titanate nanobelt as a microparticle to induce clay flocculation with CPAM

BioResources

Volumn 5, Issue 3, 2010, Pages 1895-1907

  Zhang, Xuyan ^a   Liu, Wenxia ^a  

^a BEIJING UNIVERSITY OF POSTS AND TELECOMMUNICATIONS   (China)

Author keywords

Clay; CPAM; Flocculation; Microparticle retention system; Sodium titanate nanobelt

Indexed keywords

ALKALINE CONDITIONS; CATIONIC POLYACRYLAMIDES; CPAM; DYNAMIC DRAINAGE JAR; HIGH SHEAR; HYDROTHERMALLY; KAOLIN CLAY; LOW DOSAGE; MICRO PARTICLES; MICROPARTICLE RETENTION SYSTEM; MICROPARTICLE SYSTEMS; NEGATIVE CHARGE; NEGATIVE ZETA POTENTIALS; PHOTOMETRIC DISPERSION ANALYZERS; REFLOCCULATION; SEM ANALYSIS; SODIUM HYDROXIDE SOLUTIONS; SODIUM TITANATE NANOBELT; SODIUM TITANATES; ZETA POTENTIAL MEASUREMENTS;

DYES; FLOCCULATION; KAOLIN; NANOBELTS; TITANIUM; TITANIUM DIOXIDE; ZETA POTENTIAL;

CLAY;

EID: 77956086242     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (27)

1. Andersson, K., and Lindgren, E. (1996). "Important properties of colloidal silica in microparticulate systems," Nordic Pulp Paper Res. J. 11(1), 15-21, 57.
2. Asselman, T., and Garnier, G. (2000 a). "The role of anionic microparticles in a poly(acrylamide)-montmorillonite flocculation aid system," Colloids and Surfaces A 170, 79-90
3. Asselman, T., and Garnier, G. (2000 b). "The mechanism of polyelectrolyte transfer during co-flocculation", Langmuir 16(11), 4871-4876.
4. Cho, B-U., Garnier G., van de Ven, T.G.M., Perrier M. (2009). "A deposition model for fiber-filler flocculation by microparticle retention system", J. Ind. Eng. Chem. 15, 217-223.
5. Clémencon, I., and Gerli, A. (1999). "The effect of flocculant/microparticles retention programs on floc properties," Nordic Pulp Paper Res. J. 14(1), 23-29.
6. Gill, R. I. S. (1991). "Developments in retention aid technology," Paper Technology 32(8), 34-41.
7. Honig, D. S., Harris, E. W., Pawlowska, L. M, O'Toole, M. P., and Jackson, L. A. (1993). "Formation improvements with water soluble micropolymer systems," Tappi J. 76(9), 135-141.
8. Hubbe, M. A. (2005). "Mechanistic aspects of microparticle systems," Tappi J. 4(11), 23-28.
9. Krogerus, B. (1993). "Dynamic flocculation studies on fiber fines and filler clay," Nordic Pulp Paper Res. J. 8 (1), 135-140.
10. Liu, H., Li, Y., Zhu, D. (2007). "Synthesis and properties of π conjugated organic molecular one-dimensional nanomaterials", International Journal of Nanotechnology 4(1-2), 197-213.
11. Liu, W., Ni, Y., and Xiao, H. (2003). "Cationic montmorillonite: Preparation and synergy with anionic polymer in filler flocculation," J. Pulp Paper Sci. 29(5), 145-149.
12. Main, S., and Simonson P. (1999) "Retention aids for high-speed paper machines," Tappi J. 82 (4), 78-80.
13. Mei, Y., Abetz, C., Birkert, O., Schädler, V., Leyrer, R. J., and Ballauff, M. (2006). "Interaction of spherical polyelectrolyte brushes with calcium carbonate and cellulose fibers: Mechanistic studies and their application in papermaking," Journal of Applied Polymer Science 102, 233-241.
14. Meng, X. D., Wang, D. Z., Liu, J. H., and Zhang, S. Y. (2004). "Preparation and characterization of sodium titanate nanobelts from brookite nanocrystallites," Materials Research Bulletin 39, 2163-2170.
15. Moberg, K. and Marietta, G. (1989). "Microparticles in wet end chemistry," Retention and Drainage/TAPPI Short Course, 65-85
16. Swerin, A., Sjödin, U., and Ödberg, L. (1993). "Flocculation of cellulosic fiber suspensions by model microparticulate retention aid systems," Nordic Pulp Paper Res J. 8(4), 389-398.
17. Swerin, A. and Ödberg, L. (1996). "Flocculation of cellulosic fiber suspensions by a microparticulate retention aid system consisting of cationic polyacrylamide and anionic montmorillonite," Nordic Pulp Paper Res J. 11(1), 22-29.
18. Swerin, A., Risinger, G., and Ödberg, L. (1996). "Shear strength in papermaking suspensions flocculated by retention aid systems," Nordic Pulp Paper Res J. 11(1), 30-35.
19. Vanerek, A., Alince, B., and van de Ven, T. G. M (2006). "Delamination and flocculation efficiency of sodium-activated kaolin and montmorillonite," Colloids and Surfaces A 273, 193-201.
20. Wågberg, L., Björklund, M., Åsell, I., and Swerin, A. (1996). "On the mechanism of flocculation by microparticle retention-aid systems," Tappi J. 79(6), 157-164.
21. Wang, L., and Zhang, Z. (2005). "Hydrothermal synthesis of single-crystalline sodium titanate nanobelts," Journal of Qingdao University of Science and Technology 26(5), 417-420.
22. Wang, Y., Du, G., Liu, H., Liu, D., Qin, S., Wang, N., Hu, C., Tao, X., Jiao, J., Wang, J., and Wang, Z. L. (2008). "Nanostructured sheets of Ti-O nanobelts for gas sensing and antibacterial applications," Adv. Funct. Mater. 18, 1131-1137.
23. Wang, Y. (2009). "Study on the modification and application of titania-based nanobelts," Jinan, Shandong University.
24. Wang, Z., Daemen, L.L, Zhao, Zha, Y.C.S., Downs, R.T, Wang, X., Wang Z.L. and Hemley R.J. (2005). "Morphology-tuned wurtzite-type ZnS nanobelts". Nature Materials 4, 922-927.
25. Wang, Z. L. (2004). "Functional oxide nanobelts: materials, properties and potential applications in nanosystems and biotechnology," Annu. Rev. Phys. Chem. 55, 159-196.
26. Wu, D., Liu, J., Zhao, X., Li, A., Chen, Y., and Ming, N. (2006). "Sequence of events for the formation of titanate nanotubes nanofibers, nanowires, and nanobelts," Chem. Mater. 18, 547-553.
27. Xiao, H., Liu, Z., and Wiseman, N. (1999). "Synergetic effect of cationic polymer microparticles and anionic polymer on fine clay flocculation," J. Colloid Interface Sci. 216, 409-417.