An autotuning digital controller for DC-DC power converters based on online frequency-response measurement

IEEE Transactions on Power Electronics

Volumn 24, Issue 11, 2009, Pages 2578-2588

  Shirazi, Mariko ^a   Zane, Regan ^a   Maksimovic, Dragan ^a  

^a University of Colorado   (United States)

Author keywords

DC DC power conversion; Digital control; Frequency response; Identification; Pulsewidth modulated (PWM) power converters; Switched mode power supplies (SMPS); Tuning

Indexed keywords

AUTO-TUNING ALGORITHMS; AUTOTUNING; CLOSED-LOOP BANDWIDTH; CONTINUOUS CONDUCTION MODE; DC-DC POWER CONVERSION; DC-DC POWER CONVERTER; DIGITAL CONTROL; DIGITAL CONTROLLERS; FREQUENCY-RESPONSE MEASUREMENTS; INPUT FILTER; LOOP GAINS; LOW FREQUENCY; PID CONTROLLERS; POORLY DAMPED; PULSE-WIDTH-MODULATED; PULSEWIDTH-MODULATED POWER CONVERTERS; STABILITY MARGINS; SWITCHED MODE POWER SUPPLIES;

ADAPTIVE CONTROL SYSTEMS; ALGORITHMS; CONTROL SYSTEM STABILITY; CONTROLLERS; DC-DC CONVERTERS; DIGITAL CONTROL SYSTEMS; FEEDBACK CONTROL; FREQUENCY RESPONSE; IDENTIFICATION (CONTROL SYSTEMS); PROPORTIONAL CONTROL SYSTEMS; SHAPE MEMORY EFFECT; STABILITY CRITERIA; THREE TERM CONTROL SYSTEMS; TUNING;

DC POWER TRANSMISSION;

EID: 77956073755     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2009.2029691     Document Type: Article

References (25)

1. K. J. Astrom and B. Wittenmark, Adaptive Control, 2nd ed. Reading, MA: Addison-Wesley, 1995.
2. K. J. Astrom, T. Hagglund, C. C. Hang, and W. K. Ho, "Automatic tuning and adaptation for PID controllers-A survey," Control Eng. Practice, vol. 1, no. 4, pp. 699-714, 1993.
3. L. Corradini, P. Mattavelli, and D. Maksimovic, "Robust relay-feedback based autotuning for DC-DC converters," in Proc. IEEE Power Electron. Spec. Conf., 2007, pp. 2196-2202.
4. L. Corradini, P. Mattavelli, W. Stefanutti, and S. Saggini, "Simplified model reference-based autotuning for digitally controlled SMPS," IEEE Trans. Power Electron., vol. 23, no. 4, pp. 1956-1963, Jul. 2008.
5. J. Morroni, R. Zane, and D. Maksimovic, "Design and implementation of an adaptive tuning system based on desired phase margin for digitally controlled DC-DC converters," in IEEE Trans. Power Electron., vol. 24, no. 2, pp. 559-564, Feb. 2009.
6. J. Morroni, L. Corradini, R. Zane, and D. Maksimovic, "Robust adaptive tuning of digitally controlled switched-mode power supplies," in Proc. IEEE Appl. Power Electron. Conf., 2009, pp. 240-246.
7. K. J. Astrom and B. Wittenmark, "On self-tuning regulators," Automatica, vol. 9, no. 2, pp. 185-199, 1973.
8. K. J. Astrom, U. Borrison, L. Ljung, and B. Wittenmark, "Theory and application of self-tuning regulators," Automatica, vol. 13, no. 5, pp. 457-476, 1977.
9. A. Kelly and K. Rinne, "A self-compensating adaptive digital regulator for switching converters based on linear prediction," in Proc. IEEE Appl. Power Electron. Conf., 2006, pp. 712-718. (Pubitemid 44523481)
10. S. Jeong and S. Song, "Improvement of predictive current control performance using online parameter estimation in phase controlled rectifier," IEEE Trans. Power Electron., vol. 22, no. 5, pp. 1820-1825, Sep. 2007. (Pubitemid 47423056)
11. S. Saggini, W. Stefanutti, E. Tedeschi, and P. Mattavelli, "Digital deadbeat control tuning for dc-dc converters using error correlation," IEEE Trans. Power Electron., vol. 22, no. 4, pp. 1566-1570, Jul. 2007. (Pubitemid 47098859)
12. W. Stefanutti, P. Mattavelli, S. Saggini, and M. Ghioni, "Autotuning of digitally controlled buck converters based on relay-feedback," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 199-207, Jan. 2007. (Pubitemid 46231773)
13. Z. Zhao and A. Prodic, "Limit-cycle oscillations based auto-tuning system for digitally controlled DC-DC power supplies," IEEE Trans. Power Electron., vol. 22, no. 6, pp. 2211-2222, Nov. 2007. (Pubitemid 350154055)
14. M. Shirazi, L. Corradini, R. Zane, and D. Maksimovic, "Autotuning techniques for digitally-controlled point-of-load converters with wide range of capacitive loads," in Proc. IEEE Appl. Power Electron. Conf., 2007, pp. 14-20.
15. W. Stefanutti, P. Mattavelli, S. Saggini, and M. Ghioni, "A PID autotuning method for digitally controlled DC-DC boost converters," in Proc. Eur. Conf. Power Electron. Appl., 2005, p. 10.
16. B. Miao, R. Zane, and D. Maksimovic, "Automated digital controller design," in Proc. IEEE Appl. Power Electron. Conf., 2005, pp. 2729-2735.
17. A. Davoudi, N. Kong, M. Hagen, M. Muegel, and P. Chapman, "A general framework for automated tuning of digital controllers in multi-phase DC-DC converters," in Proc. IEEE Appl. Power Electron. Conf., 2009, pp. 626-630.
18. M. Shirazi, J. Morroni, A. Dolgov, R. Zane, and D. Maksimovic, "Integration of frequency response measurement capabilities in digital controllers for DC-DC converters," IEEE Trans. Power Electron., vol. 23, no. 5, pp. 2524-2535, Sep. 2008.
19. B. Miao, R. Zane, and D. Maksimovic, "System identification of power converters with digital control through cross-correlation methods," IEEE Trans. Power Electron., vol. 20, no. 5, pp. 1093-1099, Sep. 2005. (Pubitemid 41388121)
20. A. V. Peterchev and S. R. Sanders, "Quantization resolution and limitcycling in digitally controlled PWM converters," IEEE Trans. Power Electron., vol. 18, no. 1, pp. 301-308, Jan. 2003.
21. H. Peng, A. Prodic, E. Alarcon, and D. Maksimovic, "Modeling of quantization effects in digitally controlled DC-DC converters," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 208-215, Jan. 2007. (Pubitemid 46231774)
22. C. C. Fang and E. H. Abed, "Sampled-data modeling and analysis of the power stage of PWM DC-DC converters," Int. J. Electron., vol. 88, no. 3, pp. 347-369, Mar. 2001. (Pubitemid 33701069)
23. D. Maksimovic and R. Zane, "Small-signal discrete-time modeling of digitally-controlled DC-DC converters," IEEE Trans. Power Electron., Lett., vol. 22, no. 6, pp. 2552-2556, Nov. 2007. (Pubitemid 350154088)
24. R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics, 2nd ed. Norwell, MA: Kluwer, 2001.
25. A. V. Oppenheim, R. W. Schafer, and J. R. Buck, Discrete-Time Signal Processing, 2nd ed. Upper Saddle River, NJ: Prentice-Hall, 1999.