Mechanical properties of jute fiber reinforced polypropylene composite: Effect of chemical treatment by benzenediazonium salt in alkaline medium

BioResources

Volumn 5, Issue 3, 2010, Pages 1618-1625

  Alamgir Kabir, M ^a   Monimul Huque, M ^b   Rabiul Islam, M ^a   Bledzki, Andrzej K ^c  

^a JAHANGIRNAGAR UNIVERSITY   (Bangladesh)

^b BANGLADESH UNIVERSITY OF ENGINEERING AND TECHNOLOGY   (Bangladesh)

^c UNIVERSITY OF KASSEL   (Germany)

Author keywords

Adhesion; Chemically treated jute PP composites; Jute fiber; Jute PP composite

Indexed keywords

ALKALINE MEDIA; ALKALINE MEDIUM; BENZENEDIAZONIUM SALT; CHEMICALLY TREATED JUTE-PP COMPOSITES; EFFECT OF CHEMICALS; ELONGATION AT BREAK; FIBER REINFORCED POLYPROPYLENE COMPOSITES; FLEXURAL MODULUS; FLEXURAL STRENGTH; JUTE-PP COMPOSITE; TENSILE MODULI; WEIGHT FRACTIONS;

ADHESION; ALKALINITY; FIBERS; IMPACT STRENGTH; MECHANICAL PROPERTIES; POLYPROPYLENES; REINFORCED PLASTICS; TENSILE STRENGTH; THERMOPLASTICS;

JUTE FIBERS;

ADHESION; ALKALINITY; CHEMICAL TREATMENT; COMPOSITES; FIBERS; IMPACT STRENGTH; JUTE; POLYPROPYLENE; RAW MATERIALS; REINFORCED PLASTIC; TENSILE STRENGTH; THERMOPLASTICS;

CORCHORUS CAPSULARIS;

EID: 77956070234     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (20)

1. ASTM Standard D 638-01, "Standard test methods for tensile properties of plastics," In Annual Book of ASTM Standards, Vol. 08.03, (2002).
2. ASTM Standard D 790-00, "Standard test methods for flexural properties of plastics and insulating materials," In Annual Book of ASTM Standards, Vol. 08.01, (2002).
3. ASTM Standard D 6110-97, "Standard test methods for determining the Charpy impact resistance of plastics," In Annual Book of ASTM Standards, Vol. 08.03, (2002).
4. Bisanda, E. T. N., and Ansell, M. P. (1991). "The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites," Comp. Sci. and Tech. 41, 165-178.
5. Das, B. N., Sarkar, M., Rana, A. K., Mishra, M., Mohanty, A. K., and Tripathy, S. S. (2002). "A study on biodegradable composite prepared from jute felt and polyesteramide," J. Reinf. Plast. and Comp., 21 (16), 1493-1503.
6. Gassan, J., and Bledzki, A. K. (1999). "Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment fibers," Comp. Sci. and Tech. 59, 1303-1309.
7. Karmaker, A. C., and Youngquist, J. A. (1996). "Injection molding of polypropylene reinforced with short jute fibers," J. Appl. Polym. Sci., 62, 1147-1151.
8. Maldas, D., Kokta, B. V., and Dancault, D. (1989). "Influence of coupling agents and treatments on the mechanical properties of cellulose fiber-polystyrene composites," J. Appl. Polym. Sci., 37, 751-775.
9. th Ed., Prentice-Hall International Inc., London, 971.
10. Parshad, S. V., Pavithran, C., and Rohatgi, P. K. (1983). "Alkali treatment of coir fibers for coir-polyester composites," J. Mater. Sci. 18(5), 1443-1454.
11. Pothan, L. A., Thomas, S., and Neelakantan, N. R. (1997). "Short banana fiber reinforced polyester composites: Mechanical, failure and aging characteristics," J. Reinf. Plast. and Comp. 16(8), 744-765.
12. Rana, A. K., Mandal, A., Mitra, B. C., Jacobson, R., Rowell, R., and Banerjee, A. N. (1998). "Short jute fiber reinforced polypropylene composites: Effect of compatibilizer," J. Appl. Polym. Sci., 69, 329-338.
13. Rahman, M. R., Huque, M. M., Islam, M. N., and Hasan, M. (2009). "Physicomechanical properties of maleic acid post treated jute fiber reinforced polypropylene composites," J. of Thermoplast. Comp. Mater. 22, 365-369.
14. Raval, D. K., Narola, B. N., and Patel, A. J. (2005). "Synthesis, characterization and composites from resorcinol-urea-formaldehyde-casein resin," Iranian Polym. Journal 14(9), 775-784.
15. Roe, P. J., and Ansell, M. P. (1985). "Jute-reinforced polyester composites," J. Mater. Sci. 20(11), 4015-4020.
16. Rout, J., Mishra, M., Nayak, S. K., Trypathy S. S., and Mohanty, A. K. (1999). "The influence of fiber surface modification on the mechanical properties of coir-polyester composites," Polymers 99, 489-497.
17. Shaha, A. K., Das, S., Bhatta, R. K., Mitra, B. C. (2000). "Biocomposites and blend based on jute and allied fibers," J. Appl. Polym. Sci. 78, 495-506.
18. Shaikh, A. A., and Channiwala, S. A. (2006). "Experimental and analytical investigation of jute polyester composite for long continuous fiber reinforcement," J. Reinf. Plast. and Comp. 25 (8), 863-873.
19. Sultana, S., Huque, M. M., and Helali, M. M. (2007). "Studies on the physico-mechanical properties of sodium periodate oxidized jute reinforced polypropylene composites," J. Polym. Plast. Tech. and Eng. 46, 385-391.
20. Wong, S., Shanks, R., and Hodzic, A. (2002). "Properties of poly(3-hydroxybutyric acid) composites with flax fibers modified by plasticizer absorption," Macromol. Mater. Eng. 287 (10), 647-655.