Physico-mechanical properties of maleic acid post treated jute fiber reinforced polypropylene composites

Journal of Thermoplastic Composite Materials

Volumn 22, Issue 4, 2009, Pages 365-381

  Rahman, Rezaur ^a   Hasan, Mahbub ^a   Huque, Monimul ^b   Islam, Nazrul ^b  

^a UNIVERSITI MALAYSIA SARAWAK   (Malaysia)

^b BANGLADESH UNIVERSITY OF ENGINEERING AND TECHNOLOGY   (Bangladesh)

Author keywords

Composite; Jute fiber; Maleic acid; Physico mechanical properties; Polypropylene; Post treatment.

Indexed keywords

COMPOSITE; ENVIRONMENTAL AWARENESS; FIBER CONTENTS; FIBER REINFORCED COMPOSITES; INTERFACIAL BONDING; MALEIC ACID; MALEIC ACIDS; MICROSTRUCTURAL ANALYSIS; NATURAL FIBER REINFORCED THERMOPLASTICS; PHYSICO-MECHANICAL PROPERTIES; POST TREATMENT.; PP MATRIX;

ACIDS; CHEMICAL MODIFICATION; FIBER REINFORCED PLASTICS; FIBERS; JUTE FIBERS; MECHANICAL TESTING; PLASTIC PRODUCTS; POLYPROPYLENES; PUMPING PLANTS; REINFORCED PLASTICS; THERMOPLASTICS;

MECHANICAL PROPERTIES;

ACIDS; COMPOSITES; FIBERS; JUTE; MALEIC ACID; MECHANICAL PROPERTIES; MECHANICAL TESTS; PLASTICS; POLYPROPYLENE; THERMOPLASTICS;

EID: 70349639415     PISSN: 08927057     EISSN: 15307980     Source Type: Journal    
DOI: 10.1177/0892705709100664     Document Type: Article

References (36)

1. Premlal, H.G.B., Ismail, H. and Baharin, A. (2002). A Comparison of the Mechanical Properties of Rice Husk Powder Filled Polypropylene Composites with Talc Filled Polypropylene Composites, Polymer Testing, 21 (7). 833-839.
2. Yang, H.S., Kim, H.J., Park, H.J., Lee, B.J. and Hwang T.S. (2006). Water Absorption Behavior and Mechanical Properties of Lignocellulosic Filler-Polyolefin Bio-Composites, Composite Structure, 72: 429-437.
3. Yang, H.S., Kim, H.J., Park, H.J., Lee, B.J. and Hwang, T.S. (2007). Effect of Compatibilizing Agents on Rice Husk Flour Reinforced Polypropylene Composites, Composite Structure, 77: 45-55.
4. Choi, N.W., Mori, I. and Ohama, Y. (2006). Development of Rice Husks-Plastic Composites for Building Materials, Waste Management, 26 (2). 189-194.
5. Thwe, M.M. and Liao, K. (2002). Effects of Environmental Aging on the Mechanical Properties of Bamboo-Glass Fiber Reinforced Polymer Matrix Hybrid Composites, Composites A, 33: 43-52.
6. Park, B.D., Wi, S.G., Lee, K.H., Singh, A.P., Yoon, T.H. and Kim, Y.S. (2003). Characterization of Anatomical Features and Silica Distribution in Rick Husk Using Microscope and Micro-Analytical Techniques, Biomass Bioenergy, 25: 319-327.
7. Yang, H.S., Kim, H.J., Son, J., Park, H.J., Lee, B.J. and Hwang T.S. (2004). Rick-Husk Flour Filled Polypropylene Composites; Mechanical and Morphological Study, Composite Structure, 63: 305-312.
8. Rana, A.K., Mandal, A. and Bandyopadhyay, S. (2003). Short Jute Fiber Reinforced Polypropylene Composites: Effect of Compatibiliser, Impact Modifier and Fiber Loading, Composite Science and Technology, 63: 801-806.
9. Singleton, A.C.N., Baillie, C.A., Beaumont, P.W.R. and Pejis, T. (2003). On the Mechanical Properties, Deformation and Fracture of a Natural Fiber/Recycled Polymer Composite, Composites B, 34: 519-526.
10. Vink, E.T.H., Rabago, K.R., Glassner, D.A. and Gruber, P.R. (2003). Applications of Life Cycle Assessment to Nature Works Polylactide (PLA) Production, Polymer Degradation and Satability, 80: 403-419.
11. Stokke, D.D., Kuo, M., Curry, D.G. and Giseslman, H.H. (2001). Grassland Flour/ Polyethylene Composites, In: Proceedings of 6th International Conference on Woodfiber Plastic Composites, Madison, USA, pp. 43-53.
12. Vilaseca, F., Mendez, J.A., Pelach, A., Llop, M., Canigueral, N., Girones, J., Turon, X. and Mutje, P. (2007). Composite Materials Derived from Biodegradable Starch Polymer and Jute Strands, Process Biochemistry, 42: 329-334.
13. Planckett, D., Andersen, T.L., Pedersen, W.B. and Nielsen, L. (2003). Biodegradable Composites Based on L-Polylactide and Jute Fibers, Composite Science and Technology, 63: 1287-1296.
14. Gassan, J. and Bledzki, A.K. (1999). Possibilities for Improving Mechanical Properties of Jute/Epoxy Composites by Alkali Treatment of Fibers, Composite Science and Technology, 59: 1303-1309.
15. Sarkar, B.K. and Ray, D. (2004). Effect of the Defect Concentration on the Impact Fatigue Endurance of Untreated and Alkali Treated Jute-Vinylester Composites Under Normal and Liquid Nitrogen Atmosphere, Composite Science and Technology, 64: 2213-2219.
16. Ray, D., Sarkar, B.K., Das, S. and Rana, A.K. (2002). Dynamic Mechanical and Thermal Analysis of Vinylester-Resin-Matrix Composites Reinforced with Untreated and Alkali-Treated Jute Fibers, Composite Science and Technology, 62: 911-917.
17. Doan, T.T.L., Brodowsky, H. and Mader, E. (2007). Jute Fibre/Polypropylene Composites II. Thermal, Hydrothermal and Dynamic Mechanical Behaviour, Composite Science and Technology, 67: 2707-2714.
18. Visy, C., Bencsik, G., Nemeth, Z. and Vertes, A. (2008). Synthesis and Characterization of Chemically and Electrochemically Prepared Conducting Polymer/Iron Oxalate Composites, Electrochimica Acta, 53: 3942-3947.
19. Nallathambi, V., Lee, J.W., Kumaraguru, S.P., Wu, G. and Popov, B.N. (2008). Development of High Performance Carbon Composite Catalyst for Oxygen Reduction Reaction in PEM Proton Exchange Membrane Fuel Cells, Journal of Power Sources, 183: 34-42.
20. Rahman, M.R., Huque, M.M., Islam, M.N. and Hasan, M. (2008). Improvement of Physico-Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites by Post-Treatment, Composites: Part A, 39: 1739-1747.
21. Brydson, J.A. (1999). Plastics Materials, 7 th edn, Butterworth- Heinemann, Oxford.
22. Ijsg (2008). http://www.jute.org/jute-diversified-prod.htm
23. ASTM Standard D 638-01 (2002). Standard Test Methods for Tensile Properties of Plastics, Annual Book of ASTM Standard, Vol. 8, ASTM International, USA.
24. ASTM Standard D 790-00 (2002). Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, Annual Book of ASTM Standard, Vol. 8, ASTM International, USA.
25. ASTM Standard D 6110-97 (2002). Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics, Annual Book of ASTM Standard, Vol. 8, ASTM International, USA.
26. ASTM Standard D 570-99 (2002). Standard Test Methods for Water Absorption of Plastics, Annual Book of ASTM Standard, Vol. 8, ASTM International, USA.
27. ASTM Standard D 785-98 (2002). Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials, Annual Book of ASTM Standard, Vol. 8, ASTM International, USA.
28. Kazayawoko, M., Balatincez, J.J. and Matuana, L.M. (1999). Surface Modification and Adhesion Mechanisms in Wood Fiber-Polypropylene Composites, Journal of Material Science, 34: 6189-6199.
29. Saad, M.J., Ishak, Z.A.M. and Rozman, H.D. (2001). Empty Fruit Bunch (EFB)-Polypropylene Composites: The Effect of Chemical Modification of EFB with Maleic Anhydride (MAH) on the Tensile Properties and Dimensional Stability, In: Proceedings of USM-JIRCAS Joint International Symposium, Malaysia, pp. 209-223.
30. Lou, C.W., Lin, C.W., Lei, C.H., Su, K.H., Hsu, C.H., Liu, Z.H. and Lin, J.H. (2007). PET/PP Blend with Bamboo Charcoal to Produce Functional Composites, Journal of Material Processing Technology, 192-193: 428-433.
31. Jamil, M.S., Ahmed, I. and Abdullah, I. (2006). Effects of Rice Husk Filler on the Mechanical and Thermal Properties of Liquid Natural Rubber Compatibilized High-Density Polyethylene/Natural Rubber Blends, Journal of Polymer Research, 13: 315-321.
32. Joseph, S., Sreekala, M.S., Oommen, Z., Koshy, P. and Thomas, S. (2002). A Comparison of Mechanical Properties of Phenol Formaldehyde Composites Reinforced with Banana Fibers and Glass Fibers, Composite Science and Technology, 62: 1857-1868.
33. Ismail, H., Edyhan, M. and Wirjosentono, B. (2002). Bamboo Fiber Filled Natural Rubber Composites: The Effects of Filler Loading and Bonding Agent, Polymer Testing, 21 (2). 139-144.
34. Lin, J.C., Chang L.C., Nien, M.N. and Ho, H.L. (2006). Mechanical Behavior of Various Nanoparticle Filled Composites at Low-Velocity Impact, Composite Structure, 27: 30-36.
35. Jayaraman, K. (2003). Manufacturing Sisal-Polypropylene Composites with Minimum Fiber Degradation, Composite Science and Technology, 63: 367-374.
36. Mishra, S., Naik, J.B. and Patil, Y.P. (2000). The Compatibilising Effect of Maleic Anhydride on Swelling and Mechanical Properties of Plant-Fiber-Reinforced Novolac Composites, Composite Science and Technology, 60: 1729-1735.