Bio-modification of eucalyptus chemithermomechanical pulp with different white-rot fungi

BioResources

Volumn 2, Issue 4, 2007, Pages 682-692

  Yang, Qifeng ^a,b,c   Zhan, Huaiyu ^a   Wang, Shuangfei ^b   Fu, Shiyu ^a   Li, Kecheng ^c  

^a SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

^b GUANGXI UNIVERSITY   (China)

^c UNIVERSITY OF NEW BRUNSWICK   (Canada)

Author keywords

Bio modification; Eucalyptus CTMP pulp; Trametes hirsute 19 6; White rot fungi

Indexed keywords

BIOMODIFICATION; CELLULOSE LOSS; CHEMITHERMOMECHANICAL PULPS; CULTURE CONDITIONS; EUCALYPTUS CTMP; FUNGAL STRAINS; FUNGAL TREATMENT; INTERNAL BONDING; PHANEROCHAETE CHRYSOSPORIUM; PHYSICAL STRENGTH; PULP QUALITIES; TRAMETES HIRSUTE 19-6; WEIGHT LOSS; WHITE ROT FUNGI;

CELLULOSE; LIGNIN; OPTICAL PROPERTIES; TENSILE STRENGTH;

FUNGI;

EUCALYPTUS; FUNGI; PHANEROCHAETE; PHANEROCHAETE CHRYSOSPORIUM; TRAMETES;

EID: 77956067345     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (31)

1. Abuhasan. J., Pellinen, J., Joyce, T. W., and Chang, H-M. (1988) "Delignification of chemi- thermomechanical pulp by a fungal treatment," Proceedings of the AICHE Annual Meeting: New Developments in Pulp and Bleaching, Washington D.C., 1-7.
2. Akhtar, M., Attrid Ge, M., Myers, G., and Kirk, K. (1992). "Biomechanical pulping of loblolly pine chips with different strains of the white-rot fungus ceriporiopsis subvermispora," Tappi J. 75(2), 105-109.
3. Bar-Lev, S. S., Kirk, T. K., and Chang, H.-M. (1982). "Fungal treatment can reduce energy requirement for secondary refining of TMP," Tappi J. 65(10), 111-113.
4. Börås, L., and Gatenholm, P. (1999). "Surface composition and morphology of CTMP fibers," Holzforschung 53(2), 188-194.
5. Cannel, E. and Cockram, R. (2000). "The future of BCTMP," Pulp and Paper 74(5), 61-76.
6. Cisneros, H. A., Williams, G. J., and Hatton, J. V. (1995). "Fibre surface characteristics of hardwood refiner pulps," J. Pulp Paper Sci. 21(5), 178-184.
7. Ferraz, A., Guerra, A., Souza-Cruz, P. B. and Mendonça, R. (2002). "Attempts to correlate biopulping benefits with changes in the chemical structure of wood components and enzymes produced during the wood biotreatment with Ceriporiopsis subvermispora," In: Viikari, L. and Lantto, R (Eds.), Progress in Biotechnology 21. Elsevier, Amsterdam, 73-80.
8. Eriksson, K.-E. L. (1990). "Biotechnology in the pulp and paper industry," Wood Sci. Technol. 24(1), 79-101.
9. Franzén, R. (1986). "General and selective upgrading of mechanical pulps," Nordic Pulp Paper Res. J. 1(3), 4-13.
10. Fuijita, K., and Kondoi, R. (1991). "Biobleaching of kraft pulp using white-rot fungus IZU-154," Tappi J. 74(11), 123-127.
11. th ISWPC, 277-284.
12. Gruber, E. (2000). "Is there a future for chemically modified pulp?" Das Papier 87, 73-85.
13. Guerra, A., Mendonça, R., and Ferraz, A. (2005). "Bio-chemimechanical pulps from Eucalyptus grandis: strength properties, bleaching and brightness stability," J. Wood Chem. Technol. 25, 203-216.
14. Guerra, A., Pavan, P. C., and Ferraz, A. (2006). "Bleaching, brightness stability and chemical characteristics of Eucalyptus grandis-bio-TMP pulps prepared in a biopulping pilot plant," Appita J. 59, 412-415.
15. Hunt, C., Kenealy, W., Horn, E., and Houtman C. (2004). "A biopulping mechanism: Creation of acid groups on fiber," Holzforschung 58, 434-439.
16. Leatham, G. F., Myers, G. C., Wegner, T. H., and Blanchette, R. A. (1990a). "Biomechanical pulping of aspen chips: paper strength and optical properties resulting from different fungal treatments," Tappi J. 73(3), 249-255.
17. Leatham, G. F., Myers, G. C., and Wegner, T. H. (1990b). "Biomechanical pulping of aspen chips: Energy savings resulting from different fungal treatments," Tappi J. 73(5), 197-200.
18. Li, K., and Reeve, D.W. (2002). "The origins of kraft pulp fibre surface lignin," J. Pulp Paper Sci. 28, 369-373.
19. Li, K., Tan, X., and Yan, D. (2006). "Middle lamella remainders on the surfaces of various mechanical pulp fibres," Surface and Interface Analysis 38, 1328-1335.
20. Pease, E. A. and Tien, M. (1992). "Heterogeneity and regulation of manganese peroxidases from phanerochaete chrysosporium," J. Bacteriology 174(11), 3532-3540.
21. Pellinen, J., Abuhasan, J., and Chang, H.-M. (1989). "Biological delignification of pulp by Phanerochaete chrysosporium," J. Biotechnology. 10, 161-170.
22. Pere, J., Liukkonen, S., Silka-aho, M., Gullichsen, J., and Viikari, L. (1996). "Use of purified enzymes in mechanical pulping," Proc. 1996 TAPPI Pulping Conference, Nashville, TN, 693-696.
23. Reid, I. D., and Paice, M. G. (1994). "Biological bleaching of kraft pulps by white-rot fungi and their enzymes," FEMS Microbiol. Rev. 13, 369-376.
24. Scott, G. M., Akhtar, M., Lentz, M. J., Kirk, T. K., and Swaney, R. (1998). "New technology for papermaking: Commercializing biopulping," Tappi J. 81(11), 220-225.
25. Scott, G. M., and Swaney, R. (1998). "New technology for papermaking: Biopulping economics," Tappi J. 81(12), 153-157.
26. Scott, G. M., Akhtar, M., Swaney, R.E., and Houtman C. J. (2002). "Recent developments in biopulping technology at Madison, WI," In: Viikari, L., and Lantto, R. (eds.) Progress in Biotechnology 21. Amsterdam: Elsevier; 61-71.
27. Setlife, E. C., Marton, R., and Granzow, S. G. (1990). "Biomechanical pulping with white-rot fungi," Tappi J. 73(2), 141-147.
28. Shao, Z. and Li, K. (2006) "Surface lignin and interifbre bonding," J. Wood Chem. Technol. 26(3), 231-244.
29. Sykes, M. (1993). "Bleaching and brightness stability of aspen biomechanical pulps," Tappi J. 76(11), 121-126.
30. th Annual Meeting, Montreal, Canada, January 27-29, B1429-B1434.
31. Zhou, Y., and Zou, X. (2003). "Achieving desired end-use performance by using BCTMP in wood-free coated papers," Proccedings of International Mechanical Pulping Conference, 2-5 June, Quebec, Canada, 15-19.