Development of polymer based biocomposites: A review

Materials Technology

Volumn 25, Issue 3-4, 2010, Pages 158-176

  Tripathi, G ^a   Choudhury, P ^b   Basu, B ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

^b CSJM UNIVERSITY   (India)

Author keywords

BIOMATERIAL; HYDROXYAPATITE; MECHANICAL PROPERTIES; POLYMER; TISSUE REPLACEMENT

Indexed keywords

BIO-COMPOSITES; HARD TISSUES; POLYMER BASED; POLYMER CERAMIC COMPOSITE; TISSUE REPLACEMENT;

APATITE; BIOCOMPATIBILITY; BIOMECHANICS; BIOPOLYMERS; HYDROXYAPATITE; POLYMERS; REPAIR; TISSUE;

MECHANICAL PROPERTIES;

EID: 77955970962     PISSN: 10667857     EISSN: None     Source Type: Journal    
DOI: 10.1179/175355510X12723642365089     Document Type: Article

References (101)

1. S. Nath and B. Basu: 'Designing biomaterials for hard tissue replacement', J. Korean Ceram. Soc., 2008, 45, (1), 1-29.
2. B. D. Ratner, A. S. Hoffman, F. J. Schoen and J. E. Lemons: 'Biomaterials science - an introduction to materials in medicine', 2nd edn, 526; 2004, New York, Academic Press.
3. D. F. Williams: 'Definitions in biomaterials', in 'Progress in biomedical engineering', 67; 1987, Amsterdam, Elsevier.
4. D. F. Williams: Biomaterials, 2008, 29, 2941-2953.
5. F. H. Silver and D. L. Christiansen: 'Biomaterials science and biocompatibility'; 1999, London, Springer.
6. J. Black: 'Orthopaedic biomaterials: research and practice'; 1988, New York, Churchill Livingstone.
7. A. Choubey, B. Basu and R. Balasubramaniam: 'Tribological behavior of Ti-based alloys in simulated body fluid solution at fretting contacts', Mater. Sci. Eng. A, 2004, A379, 234-239.
8. M. Sivakumar, U. K. Mudali and S. Rajeswari: 'Compatibility of ferritic and duplex stainless steels as implant materials: in vitro corrosion performance', J. Mater. Sci., 1993, 28, 6081-6086.
9. A. Choubey, R. Balasubramaniam and B. Basu: 'Effect of replacement of V by Nb and Fe on the electrochemical and corrosion behavior of Ti-6Al-4V in simulated physiological environment,' J. Alloys Compd, 2004, 381, 288-294.
10. B. Basu, D. Katti and A. Kumar: 'Advanced biomaterials: fundamentals, processing and applications'; 2009, New York, John Wiley & Sons.
11. K. Friedrich, R. Reinicke and Z. Zhang: 'Wear of polymer composites', Proc. Inst. Mech. Eng. J, 2002, 216, 415-426.
12. S. Nath, R. Tripathi and B. Basu: 'Understanding phase stability, microstructure development and biocompatibility in calcium phosphate-titania composites, synthesized from hydroxyapatite and titanium powder mix', Mater. Sci. Eng. C, 2009, C29, 97-107.
13. R. Kumar, S. Kalmodia, S. Nath, D. Singh and B. Basu: 'Phase assemblage study and cytocompatibility property of heat treated potassium magnesium phosphate-silicate ceramics', J. Mater. Sci., Mater. Med., 2009, 20, (8), 1689-1695.
14. S. Ramakrishna, J. Mayer, E. Wintermantel and K. W. Leong: 'Biomedical applications of polymer-composite materials: a review,' Compos. Sci. Technol., 2001, 61, 1189.
15. D. Devanathan: 'Orthopedic composites', in 'International encyclopedia of composites', (ed. S. M. Lee), Vol.4, 74; 1991, New York, VCH.
16. B. Harris: 'The mechanical behavior of composite materials', Symp. Soc. Exp. Biol., 1980, 34, 37-74.
17. J. Esslinger and E. Rutkowski: 'Studies on the skeletal attachment of experimental hip prostheses in the pygmy goat and the dog', J. Biomed. Mater. Res. Symp., 1973, 4, 187.
18. N. Rushton and T. Rac: 'The intra-articular response to particulate carbon fiber reinforced high density polyethylene and its constituents: an experimental study in mice', Biomaterials, 1984, 5, 352.
19. E. Sclippa and K. Piekarski: 'Carbon fiber reinforced polyethylene for possible orthopedic uses', J. Biomed. Mater. Res., 1973, 7, 559.
20. H. Amstutz: 'Mechanism and clinical significance of wear debris-induced osteolysis', Clin. Orthop. Relat. Res., 1992, 276, 7.
21. N. Blumenthal: 'A new technique for quantitation of metal particulates and metal reaction products in tissue near implants', J. Appl. Biomater., 1994, 5, 191.
22. E. Schneider: 'Comparative study of the initial stability of cementless hip prostheses', Clin. Othop., 1989, 248, 200.
23. K. St. John: 'Applications of advanced composites in orthopedic implants', in 'Biocompatible polymers, metals and composites', (ed. M. Szycher), 861; 1983, Lancaster, Technomic Publishing.
24. P. Christel, A. Meunier, S. Leclercq, P. Bouquet and B. Buttazzoni: 'Development of carbon-carbon hip prostheses', J. Biomed. Mater. Res., 1987, 21, 191.
25. M. Akay and N. Aslan: 'Numerical and experimental stress analysis of a polymeric composite hip joint prostheses', J. Biomed. Mater. Res., 1996, 31, 167.
26. T. Peter, R. Tognini, J. Mayer and E. Wintermantel: 'Homoelastic, anisotropic osteosynthesis system by net shape processing of endless carbon fiber reinforced polyetheretherketone (PEEK)', Proc. 9th Conf. on 'Biomedical engineering', (ed. J. Goh and A. Nather), 317; 1991, Singapore, National University of Singapore.
27. E. Wintermantel, A. Bruinink, K. Ruffiex, M. Petitmermet and J. Mayer: 'Tissue engineering supported with structured biocom-patible materials: goals and achievements', in 'Materials in medicine', (ed. M. O. Speidal and P. J. Uggowitzer), 1; 1998, Zurich, ETH Zurich.
28. C. Silverstone, A. Rosenberg, R. Barden, M. Sheinkop and J. Galante: 'The prostheses-bone interface adjacent to tibial components inserted without cement', J. Bone Joint Surg. Am. , 1996, 78, (3), 340.
29. T. Wright, T. Fukubayashi and A. Burstein: 'The effect of carbon fiber reinforced on contact area, contact pressure and time dependent deformation in polyethylene tibial components', J. Biomed. Mater. Res., 1981, 15, 719.
30. P. L. Walton and A. J. Majumdar: 'Properties of cement composites reinforced with Kevlar fibres', J. Mater. Sci., 1978, 13, (5), 1075-1083.
31. G. Purcek, O. Saray, I. Karaman and T. Kucukomeroglu: 'Effect of severe plastic deformation on tensile properties and impact toughness of two-phase Zn-40Al alloy', Mater. Sci. Eng. A, 2008, A490, (1-2), 403-410.
32. B. Moyen, P. Lahey, E. Weinberg and W. Harris: 'Effects on intact femora of dogs of the application and removal of metal plates', J. Bone Joint Surg. Am., 1978, 60, (7), 940.
33. S. Ramakrishna, J. Mayer, E. Wintermantel and K. W. Leong: 'Biomedical applications of polymer-composite materials: a review', Compos. Sci. Technol., 2001, 61, (9), 1189-1224.
34. M. Wang, S. Deb and W. Bonfield: 'Chemically coupled hydroxyapatite- polyethylene composites: processing and characterization', Mater. Lett., 2000, 44, (2), 119-124.
35. M. Wang and W. Bonefield: 'Chemically coupled hydroxyapatite-polyethylene composite: structure and properties', Biomaterials, 2001, 22, 1311.
36. L. D. Silvio, M. J. Dalby and W. Bonfield: 'Osteoblast behaviour on HA/PE composite surfaces with different HA volumes', Biomaterials, 2002, 23, (1), 101-107.
37. W. Bonefield: 'Hydroxyapatite reinforced polyethylene as an analogous material for bone replacement', Ann. NY Acad. Sci., 1988, 523, 173.
38. M. Wang, R. Joseph and W. Bonefield: 'Hydroxyapatite-poly-ethylene composites for bone substitution: effects of ceramic particle size and morphology', Biomaterials, 1998, 19, 2357.
39. M. Wang, M. Chandrasekaran and W. Bonefeild: 'Friction and wear of hydroxyapatite reinforced high density polyethylene against the stainless steel counterface', J. Mater. Sci., Mater. Med., 2004, 13, 607.
40. R. Rothon: 'Particulate-filled polymer composites', 294; 1995, New York, Longman Scientific & Technical.
41. A. Y. Sadi, S. S. Homaeigohar, A. R. Khavandi and J. Javadpour: 'The effect of partially stabilized zirconia on the mechanical properties of the hydroxyapatite-polyethylene composites', J. Mater. Sci., Mater. Med., 2004, 15, 853.
42. Y. M. Kong, S. Kim and H. E. Kim: 'Reinforcement of hydroxyapatite bioceramic by addition of ZrO2 coated with Al2O3', J. Am. Ceram. Soc., 1999, 82, (11), 2963.
43. J. R. Sarasua and P. M. Remiru: 'The mechanical behaviour of PEEK short fiber composites,' J. Mater. Sci., 1995, 30, 3501-3508.
44. M. S. A. Bakar, P. Cheang and K. A. Khor: 'Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocom-posites', Compos. Sci. Technol., 2003, 63, 421-425.
45. M. S. A. Bakar, M. H. W. Cheng, S. M. Tang, S. C. Yu, K. Liao, C. T. Tan, K. A. Khor and P. Cheang: 'Tensile properties, tension-tension fatigue and biological response of polyetheretherketone-hydroxyapatite composites for load-bearing orthopedic implants', Biomaterials, 2003, 24, 2245-2250.
46. S. Yu, K. P. Hariram, R. Kumar, P. Cheang and K. K. Aik: 'In vitro apatite formation and its growth kinetics on hydroxyapatite/ polyetheretherketone biocomposites', Biomaterials, 2005, 26, 23432352.
47. X. Wang, Y. Li, J. Wei and K. Groot: 'Development of biomimetic nano-hydroxyapatite/poly (hexamethylene adipamide) composites', Biomaterials, 2002, 23, (9), 4787.
48. S. Hasegawa, S. Ishii, J. Tamura, T. Furukawa, M. Neo, Y. Matsusueb, Y. Shikinami, M. Okuno and T. Nakamura: 'A 5-7 year in vivo study of high-strength hydroxyapatite/poly(L-lactide) composite rods for the internal fixation of bone fractures', Biomaterials, 2006, 27, 1327-1332.
49. H. Itokawa, T. Hiraide, M. Moriya, M. Fujimoto, G. Nagashima, R. Suzuki and T. Fujimoto: 'A 12 month in vivo study on the response of bone to a hydroxyapatite-polymethylmethacrylate cranioplasty composite', Biomaterials, 2007, 28, 4922-4927.
50. S. Nath, S. Bodhak and B. Basu: 'HDPE-Al2O3-HAp composites for biomedical applications: processing and characterization', J. Biomed. Mater. Res. B, Applied Biomaterials, 2009, 88B, 1-11.
51. S. J. Monte and G. Sugerman: Polym. Eng. Sci., 1984, 24, 18.
52. N. Iwashita, E. Psomiadou and Y. Sawada: Composites A, 1998, 29A, 965.
53. S. G. Du, J. F. Che, Y. H. Xiao, F. X. Ji and X. J. Jin: J. Appl. Polym. Sci., 1997, 63, 1259.
54. N. Menon, F. D. Blum and I. R. Dharani: J. Appl. Polym. Sci., 1994, 54, 113.
55. B. Singh, A. Verma and M. Gupta: J. Appl. Polym. Sci., 1998, 70, 1847.
56. K. N. Hunt, J. R. G. Evans and J. Woodthorpe: Polym. Eng. Sci., 1988, 28, 1572.
57. S. J. Monte and G. Sugerman: Polym. Eng. Sci., 1984, 24, 18.
58. A. Y. Kharade and D. D. Kale: J. Appl. Polym. Sci., 1999, 72, 1321.
59. S. F. Xavier, J. M. Schultz and K. Friedrich: J. Mater. Sci., 1990, 25, 2425.
60. N. Menon, F. D. Blum and I. R. Dharani: J. Appl. Polym. Sci., 1994, 54, 113.
61. B. Singh, A. Verma and M. Gupta: J. Appl. Polym. Sci., 1998, 70, 1847
62. K. N. Hunt, J. R. G. Evans and J. Woodthorpe: Polym. Eng. Sci., 1988, 28, 1572.
63. R. N. Rothon: in 'Particulate-filled polymer composites', (ed. R. N. Rothon); 1995, Longman, London, Chap. 6.
64. G. Tripathi, A. Dubey and B. Basu: 'Consolidation, physical and biocompatibility property of chemically coupled HDPE based biocomposites with ceramic fillers', J. Biomed. Mater. Res. B, 2009, to be published.
65. M. Wang, N. H. Ladizesky, K. E. Tanner, I. M. Ward and W. Bonfield: 'Hydrostatically extruded HAPEXTM', J. Mater. Sci., 2000, 35, 1023-1030.
66. R. A. Sousa, R. L. Reis, A. M. Cunha and M. J. Bevis: 'Structural development of HDPE in injection moulding', J. Appl. Polym. Sci., 2003, 89, 2079-2087.
67. M. Wang, D. Porter and W. Bonfield: 'Processing: characterisation, and evaluation of hydroxyapatite reinforced polyethylene composites', Br. Ceram. Trans., 1994, 93, 91-95.
68. A. Y. Sadi, S. S. Homaeigohar, A. R. Khavandi and J. Javadpour: 'The effect of partially stabilized zirconia on the mechanical properties of the hydroxyapatite-polyethylene composites', J. Mater. Sci., Mater. Med., 2004, 15, 853-858
69. R. A. Sousa, R. L. Reis, A. M. Cunha and M. J. Bevis: 'Processing and properties of bone-analogue biodegradable and bioinert polymeric composites', Compos. Sci. Technol., 2003, 63, 389-402.
70. S. Bodhak, S. Nath and B. Basu: 'Understanding the fretting wear properties of HAp, Al2O3 containing HDPE biocomposites against ZrO2', J. Biomed. Mater. Res. A, 2008, 85A, 83.
71. S. Nath, S. Bodhak and B. Basu: 'Tribological investigation of novel HDPE-HAp-Al2O3 hybrid biocomposites against steel under dry and simulated body fluid condition', J. Biomed. Mater. Res. A, 2007, 83A, (1), 191-208.
72. S. Bodhak, S. Nath and B. Basu: 'Friction and wear properties of novel HDPE-HAp-Al2O3 composites against alumina counter-face', J. Biomater. Appl., 2009, 23, 407-433.
73. B. D. Ratner, A. S. Hoffman, F. J. Schoen and J. E. Lemons: 'Biomaterials science: an introduction to materials in medicine'; 2004, London, Elsevier Academic Press.
74. K. Schwartzwalde and A. V. Somers: US Patent 3,090,094, 1963.
75. J. Saggio-Woyanski, C. E. Scott and W. P. Minnear: Am. Ceram. Soc. Bull, 1992, 71, (11), 1674.
76. O. Lyckfeldt and J. M. F. Ferreira: 'Processing of Porous Ceramics by Starch Consolidation', J. Eur. Ceram. Soc, 18, 2, 131-140.
77. A. F. Lemos, J. D. Santos and S. Lesca: J. Eur. Ceram. Soc. , 2000, 20, (14-15)2551.
78. S. M. Olhero, G. Tari, M. A. Coimbra and J. M. F. Ferreira: J. Eur. Ceram. Soc. Bull., 2000, 20, (4), 423.
79. F. Nagata, T. Miyajima and Y. Yokogawa: 'PLA/HAp micro-sphere-based porous materials for artificial bone grafts', Key Eng. Mater., 2004, 254-256, 293.
80. H. Helen, F. Saadiq, D. Kimberli and T. Cato: 'Three-dimensional, bioactive, biodegradable, polymer-bioactive glass composite scaffolds with improved mechanical properties support collagen synthesis and mineralization of human osteoblast-like cells in vitro', J. Biomed. Mater. Res. A, 2003, 64A, 645-647.
81. H. Yildiz, F. K. Chang and S. Goodman: 'Composite hip prostheses design. II. Simulation', J. Biomed. Mater. Res. , 1998, 39, (1), 102-119.
82. M. S. Abu Bakar, P. Cheang and K. A. Khor: 'Tensile properties and microstructural analysis ofspheroidized hydroxyapatite-poly(-ether-etherketone) biocomposites', Mater. Sci. Eng. A, 2003, A34, 55-63.
83. S. Senapati and S. Pal: 'UHMWPE-alumina ceramic composite, an improved prostheses materials for an artificial cemented hip joint', Trends Biomater. Artif. Organs, 2002, 16, (1), 5.
84. E. J. Frazza and E. E. Schmitt: 'A new absorbable suture', J. Biomed. Mater. Res., 1971, 1, 43
85. D. K. Gilding and A. M. Reed: 'Biodegradable polymers for use in surgery - poly(glycolic)/poly(Iactic acid) homo and copolymers: 1', Polymer, 1979, 20, 1459.
86. S. Corcoran, J. Koroluk, J. R. Parsons, H. Alexander and A. B. Weiss: 'The development of a variable stiff, absorbable composite bone plate', in 'Current concepts for internal fracture fixation of fractures', (ed. H. K. Uhthoff), 136; 1981, New York, Springer-Verlag.
87. M. C. Zimmerman, J. R. Parsons and H. Alexander: 'The design and analysis of a laminated degradable composite bone plate for fracture fixation', J. Biomed. Mater. Res. A, 1987, 21A, (3), 345.
88. M. C. Zimmerman, H. Alexander, J. R. Parsons and P. K. Bajpai: 'The design and analysis of laminated degradable composite bone plates for fracture fixation', in 'High-tech textiles', (ed. T. Vigo), 132-148; 1991, Washington, DC, American Chemical Society.
89. R. Kuijer, J. M. Bouwmeester, M. M. W. E. Drees, D. A. M. Surtel, E. A. W. Terwindt-Rouwenhorst, A. J. van der Linden, C A. van Blitterswijk and S. K. Bulstra: 'The polymer polyactive as a bone-filling substance: an experimental study in rabbits', J. Mater. Sci., Mater. Med. 1998, 9, 449-455.
90. M. Kikuchi, J. Tanaka, Y. Koyama and K. Takakuda: 'Cell culture tests of TCP/CPLA composite', J. Biomed. Maters. Res., 1999, 48, (2), 108-111.
91. R. Zhang and P. X. Ma: 'Porous poly(l-lactic) acid/apatite composites created by biomimetic process', J. Biomed. Maters. Res., 1999, 45, (4), 285-294.
92. I. D. Thompson and L. L. Hench: 'Mechanical properties of bioactive glasses, glass-ceramics and composites', Proc. Inst. Mech. Eng. H, 1998, 212H, 127-136.
93. L. Hench and J. West: 'Biological applications of bioactive glasses', Life Chem. Rep., 1996, 13, 187-241
94. J. C. Elliott: 'Structure and chemistry of the apatites and other calcium orthophosphates'; 1994, Amsterdam, Elsevier.
95. T. Kokubo, S. Ito, Z. T. Huang, T. Hayashi, S. Sakka, T. Kitsugi and T. Yamamuro: 'Ca-P rich layer formed on high strength bioactive glass-ceramics A-W', J. Biomed. Mater. Res., 1990, 24, 331-343.
96. M. M. Peireira, A. E. Clark and L. L. Hench: 'Calcium phosphate formation on sol-gel-derived bioactive glasses in vitro', J. Biomed. Mater. Res., 1994, 28, (6), 693-698.
97. G. Daculsi, R. Z. LeGeros, M. M. Heughebaert and I. Barbieux: 'Formation of carbonate apatite crystals after implantation of calcium phosphate ceramics', Calcif. Tissue Int., 1990, 46, 20-27.
98. R. Z. Legeros: 'Properties of osteoconductive biomaterials: calcium phosphates', Clin. Orthop. Relat. Res., 2002, 395, 81-98.
99. H. Oonishi, L. L. Hench, J. Wilson, F. Sugihara, E. Tsuji, S. Kushitani and H. Iwaki: 'Comparative bone growth behavior in granules of bioceramic materials of various sizes', J. Biomed. Mater. Res., 44, (1), 31-43.
100. C. T. Hanks, J. C. Watahaz and Z. Suni: 'In vitro models of biocompatibility: a review', Dent. Mater., 1996, 12, 186-193.
101. A. Dubey, A. Tiwari, R. Kumar, S. Gupta and B. Basu: 'Time constant determination for electrical equivalent of biological cells', J. Appl. Phys., 2009, 105, (8), 084705-084705-84708