Acoustic simulation of a special switched reluctance drive by means of fieldcircuit coupling and multiphysics simulation

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 9, 2010, Pages 2946-2953

  Van Der Giet, M ^a   Lange, E ^a   Correa D A P ^b   Chabu, I E ^c   Nabeta, S I ^c   Hameyer, K ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

^b Centro Tecnologico da Marinha em Sao Paulo CTMSP   (Brazil)

^c UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

Acoustic noise of electrical machines; fieldcircuit coupling numerical simulation; finite element method (FEM); switched reluctance motor (SRM)

Indexed keywords

ACOUSTIC BEHAVIOR; ACOUSTIC RADIATION; ACOUSTIC SIMULATIONS; BOUNDARY ELEMENTS; ELECTRICAL MACHINE; FIELD-CIRCUIT COUPLING; FINITE-ELEMENT; FREQUENCY DOMAINS; HARMONIC FORCE; LUMPED PARAMETER MODELS; MAPPING TECHNIQUES; MODIFIED NODAL ANALYSIS; MULTIPHYSICS SIMULATIONS; POLE GEOMETRY; POLE SHAPE; RADIATION CHARACTERISTICS; SIMULATION RESULT; START-UPS; STRESS TENSORS; SWITCHED RELUCTANCE DRIVES; SWITCHED RELUCTANCE MOTOR; TORQUE RIPPLES;

ACOUSTIC NOISE; CIRCUIT SIMULATION; COUPLINGS; ELECTRIC MACHINERY; FREQUENCY DOMAIN ANALYSIS; MODAL ANALYSIS; OPTIMIZATION; RELUCTANCE MOTORS; STRESSES; STRUCTURAL DYNAMICS; UNDERWATER ACOUSTICS;

FINITE ELEMENT METHOD;

EID: 77955590248     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2051935     Document Type: Article

References (26)

1. S. Nabeta, I. Chabu, L. Lebensztajn, D. Correa, W. da Silva, and K. Hameyer, "Mitigation of the torque ripple of a switched reluctance motor through a multiobjective optimization," IEEE Trans. Magn., vol.44, no.6, pp. 1018-1021, Jun. 2008.
2. N. Sadowski, Y. Lefevre, C. Neves, and R. Carlson, "Finite elements coupled to electrical circuit equations in the simulation of switched reluctance drives: Attention to mechanical behaviour," IEEE Trans. Magn., vol.32, no.3, pp. 1086-1089, May 1996.
3. M. Hecquet and P. Brochet, "Modeling of a claw-pole alternator using permeance network coupled with electric circuits," IEEE Trans. Magn., vol.31, no.3, pp. 2131-2134, May 1995.
4. H. Bai, S. Pekarek, J. Techenor, W. Eversman, D. Buening, G. Holbrook, M. Hull, R. Krefta, and S. Shields, "Analytical derivation of a coupledcircuit model of a claw-pole alternator with concentrated stator winding," IEEE Power Eng. Rev., vol.21, no.12, p. 66, Dec. 2001.
5. A. Canova, M. Ottella, and D. Rodger, "A coupled field-circuit approach to 3D FEM analysis of electromechanical devices," in Proc. 9th Int. Conf. Elect. Mach. Drives (Conf. Pub. 468), 1999, pp. 71-75.
6. P. Zhou, D. Lin, W. Fu, B. Ionescu, and Z. Cendes, "A general cosimulation approach for coupled field-circuit problems," IEEE Trans. Magn., vol.42, no.4, pp. 1051-1054, Apr. 2006.
7. S. Kanerva, S. Seman, and A. Arkkio, "Inductance model for coupling finite element analysis with circuit simulation," IEEE Trans.Magn., vol.41, no.5, pp. 1620-1623, May 2005.
8. H. Jordan, Geräuscharme Elektromotoren, H. Franz, Ed. Essen, Germany: W. Girardet, Nov. 1950.
9. J. Gieras, C. Wang, and J. C. Lai, Noise of Polyphase Electric Motors. Boca Raton, FL: CRC Press, 2006.
10. J. Le Besnerais, A. Fasquelle, M. Hecquet, J. Pelle, V. Lanfranchi, S. Harmand, P. Brochet, and A. Randria, "Multiphysics modeling: Electro-vibro-acoustics and heat transfer of PWM-fed induction machines," IEEE Trans. Ind. Electron., vol.57, no.4, pp. 1279-1287, Apr. 2010.
11. M. Furlan, A. Cernigoj, and M. Boltezar, "A coupled electromagneticmechanical-acoustic model of a DC electric motor," COMPEL, Int. J. Comput. Math. Elect. Electron. Eng., vol.22, no.4, pp. 1155-1165, 2003.
12. C. Schlensok, B. Schmülling, M. van der Giet, and K. Hameyer, "Electromagnetically excited audible noise evaluation and optimization of electrical machines by numerical simulation," COMPEL, Int. J. Comput. Math. Elect. Electron. Eng., vol.26, no.3, pp. 727-742, 2007.
13. K. Vijayakumar, R. Karthikeyan, S. Paramasivam, R. Arumugam, and K. Srinivas, "Switched reluctance motor modeling, design, simulation, and analysis: A comprehensive review," IEEE Trans. Magn., vol.44, no.12, pp. 4605-4617, Dec. 2008.
14. I. Chabu, S. Nabeta, and J. Cardoso, "Design aspects of 4:2 pole-2 phase switched reluctance motors," in Proc. IEMD Conf., May 1999, pp. 63-65.
15. T. Miller, "Optimal design of switched reluctance motors," IEEE Trans. Ind. Electron., vol.49, no.1, pp. 15-27, Feb. 2002.
16. B. Mirzaeian, M. Moallem, V. Tahani, and C. Lucas, "Multiobjective optimization method based on a genetic algorithm for switched reluctance motor design," IEEE Trans. Magn., vol.38, no.3, pp. 1524-1527, May 2002.
17. E. Lange, F. Henrotte, and K. Hameyer, "A circuit coupling method based on a temporary linearization of the energy balance of the finite element model," IEEE Trans. Magn., vol.44, no.6, pp. 838-841, Jun. 2008.
18. N. Demerdash and T. Nehl, "Electric machinery parameters and torques by current and energy perturbations from field computations. I. Theory and formulation," IEEE Trans. Energy Convers., vol.14, no.4, pp. 1507-1513, Dec. 1999. (Pubitemid 30540929)
19. F. Henrotte and K. Hameyer, "The structure of electromagnetic energy flows in continuous media," IEEE Trans. Magn., vol.42, no.4, pp. 903-906, Apr. 2006.
20. F. Henrotte and K. Hameyer, "A theory for electromagnetic force formulas in continuous media," IEEE Trans. Magn., vol.43, no.4, pp. 1445-1448, Apr. 2007.
21. J. Melcher, Continuum Electromechanics. Cambridge, MA: MIT Press, 1981.
22. S. J. Yang, Low-Noise Electrical Motors, S. J. Yang, Ed. Oxford, U.K.: Clarendon, 1981.
23. O. Zienkiewicz and R. Taylor, The Finite Element Method, 4th ed. London, U.K.: McGraw-Hill, 1991.
24. S. Long, Z. Zhu, and D. Howe, "Vibration behaviour of stators of switched reluctance motors," Proc. Inst. Elect. Eng.-Electr. Power Appl., vol.148, no.3, pp. 257-264, May 2001.
25. R. D. Ciskowski and C. A. Brebbia, Boundary Element Methods in Acoustics. Amsterdam, The Netherlands: Elsevier, 1991.
26. A. Ruiz-Gonzalez, M. Meco-Gutierrez, F. Perez-Hidalgo, F. Vargas-Merino, and J. Heredia-Larrubia, "Reducing acoustic noise radiated by inverter-fed induction motors controlled by a new PWM strategy," IEEE Trans. Ind. Electron., vol.57, no.1, pp. 228-236, Jan. 2010.