Noise of polyphase electric motors

Noise of Polyphase Electric Motors

Volumn , Issue , 2005, Pages 1-368

  Gieras, Jacek F ^a   Wang, Chong ^b   Lai, Joseph Cho ^c  

^a HAMILTON SUNDSTRAND   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

^c UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84982933363     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (256)

1. Ackerman, B., Janssen, J.H.H., Sottek, R., and van Steen, R.I.: New technique for reducing cogging torque in a class of brushless d.c. motors, IEE Proc. Pt. B, 139(4), 1992, pp. 315–320.
2. Amor, A.H., Timar, P.L., and Poloujadoff, M.: Induction squirrel cage machine design with minimization of electromagnetic noise, IEEE Trans. on EC, Vol. EC-10(4), 1995, pp. 681–687.
3. Astfalck, A., Pulle, D.W.J., and Lai, J.C.S.: Prediction of transient stator force distribution of inverter driven induction motors, AUPEC/EECON’97, Sydney, Australia, 1997, Vol. 1, pp. 1–6.
4. Australian Standard AS 1259 Sound level meters, 1982.
5. Australian Standard AS 2659 Guide to the use of sound measuring equipment, Part 1: Portable sound level meters, 1988; Part 2: Portable equipment for integration of sound signals, 1983.
6. Australian Standard AS 2659. Guide to the use of sound measuring equipment: Portable sound level meters, 1988.
7. Australian Standard AS 2679 Vibration and shock – Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity, 1984.
8. Australian Standard AS 2775 Vibration and shock – Mechanical mounting of accelerometers, 1985.
9. Australian Standard AS 2973 Vibration and shock – Human response vibration-measuring instrumentation, 1987.
10. Astakhov, N.V., Malishev, V.S., and Ovcharenko, N. J.: Magnetic Vibration of Asynchronous Motors (in Russian), Stinca, Kišiniev, 1985.
11. Bies, D. and Hansen, C.H.: Engineering Noise Control, Unwin Hyman, 1988.
12. Bauer, B.B.: A century of microphones, J. Audio Eng. Soc., Vol. 35(4), 1987, pp. 246–258.
13. Belkhayat, D., Roger, D., and Brudny, J.F.: Active reduction of magnetic noise in asynchronous machine controlled by stator current harmonics, Int. Electrical Machines and Drives Conf. EMD’97, Cambridge, U.K., IEE Conf. Publication No. 444, 1997, pp. 400-405.
14. Bendat, J.S. and Piersol, A.: Random data: Analysis and measurement procedures, John Wiley & Sons, 1971.
15. Berry, A.: A general formulation for the sound radiation from rectangular, baffled plates with arbitrary boundary conditions, J. Acoust. Soc. Am., Vol. 88(6), 1990, pp. 2792–2802.
16. Bianchi, N. and Bolognani, S.: Design techniques for reducing the cogging torque in surface mounted PM motors, IEEE Trans. IA, Vol. 38(5) 2002, pp. 1259–1265.
17. Bies, D.A. and Hamid, S.: In situ determination of loss and coupling loss factors by the power injection method, J. Sound and Vibration, Vol. 70(2), 1980, pp. 187–204.
18. Breton, C., Bartolome, J., Benito, J.A., Tassinario, G., Flotats, I., Lu, C.W., and Chalmers, B.J.: Influence of machine symmetry on reduction of cogging torque in permanent magnet brushless motors, IEEE Trans. MAG Vol. 36(5), 2000, pp. 3819–3823.
19. Broch, J.T.: Mechanical Vibration and Shock Measurements, Brüel & Kjaer Handbook, 1984.
20. Brunsbach, B.J., Henneberger, G., and Klepach, T.: Compensation of torque ripple, Int. Conf. on Electr. Machines ICEM’98, Istanbul, Turkey, 1998, pp. 588–593.
21. Bruskin, D.E., Zorokhovič, A.E., and Khvostov, V.C.: Electrical Machines, (in Russian), Part 1, Moscow, Vyzšaya Škola, 1979.
22. Buckens, F.: Influence of the relative radial thickness of a ring on its natural frequencies, J. Acoust. Soc. Am. Vol. 22(4), 1950, pp. 437–443.
23. Burroughs, C.B., Fischer, R.W., and Kern, F.K.: An introduction to statistical energy analysis, J. Acoust. Soc. Am. Vol. 101(4), 1997, pp. 1779–1789.
24. Buzdugan, G., Mihailescu, E., and Rades, M.: Vibration Measurement, Martinus Nijhoff Publishers, 1986.
25. Cacciolati, C. and Guyader, J.L.: Measurement of SEA coupling loss factors using point mobilities, Phil. Trans. Royal Society London A, Vol. 346, 1994, pp. 465–475.
26. Cai, W., Fulton, D., and K. Reichert: Design of permanent magnet motors with low torque ripple, Int. Conf. on Electr. Machines ICEM’00, Espoo, Finland, Vol. 3, 2000, pp. 1384–1388.
27. Carr, I.E. and Lalor, N: The prediction and reduction of noise from engine covers using energy methods, Proc. of Advances in the Control and Refinement of Vehicle Noise, 1988, pp. 159–165.
28. Carlson, R., Lajoie-Mazenc, M., and Fagundes, J.C.S.: Analysis of torque ripple due to phase commutation in brushless d.c. machines, IEEE Trans. IAS 28(3), 1992, pp. 632–638.
29. Chen, Y.D., Fuh, C.C., and Tung, P.C.: Application of voice coil motors in active dynamic vibration absorbers, IEEE Trans. on MAG, Vol. 41(3), 2005, pp. 1149–1154.
30. Chen, S.X., Low, T.S., Lin, H., and Liu, Z.J.: Design trends of spindle motors for high performance hard disk drives, IEEE Trans. on MAG 32(5), 1996, pp. 3848–3850.
31. Cho, D.H. and Kim, K.J.: Modeling of electromagnetic excitation forces of small induction motors for vibration and noise analysis, Proc. IEE, Part B: EPA, Vol. 145(3), 1998, pp. 199–205.
32. Chung, J.Y.: Cross-spectral method of measuring acoustic intensity without error caused by instrument phase mismatch., J. Acoust. Soc. Am., Vol. 64, 1978, pp. 1613–1616.
33. Ciskowski, R.D. and Brebbia, C.A.: Boundary Element Methods in Acoustics, Elsevier Applied Science, 1997.
34. Condenser Microphones and Microphone Preamplifiers for Acoustic Measurement, Brüel & Kjaer, 1982.
35. Coyette, J.P. and Migeot, J.L.: An overview of boundary element approaches for acoustic modelling, Internoise 93, 1993, Leuven, Belgium, pp. 709–714.
36. Covic, G.A. and Boys, J.T.: Noise quieting with random PWM a.c. drives, Proc. IEE, Part B: EPA, Vol. 145, 1998, pp. 1–10.
37. Cremer, L., Heckle, M., and Ungar, E.E.: Structure-Borne Sound: Structural Vibrations and Sound Radiation at Audio Frequencies, 2nd edition, Springer-Verlag, New York, 1988.
38. Crighton, D.G. et al.: Modern Methods in Analytical Acoustics, London, Springer-Verlag, 1992.
39. Crocker, M.J. and Price, A.: Sound transmission using statistical energy analysis., J. of Sound and Vibration, Vol. 9, 1969, pp. 469–486.
40. Dabrowski, M.: Magnetic Field and Circuits of Electrical Machines (in Polish), Warsaw, WNT, 1971.
41. Dabrowski, M.: Construction of Electrical Machines (in Polish), WNT, Warsaw, 1977.
42. Davies, H.G. and Wahab, M.A.: Ensemble averages of power flow in randomly excited coupled beams., J. of Sound and Vibration, Vol. 77(3), 1981, pp. 311–321.
43. Delaere, K., Iadevaia, M., Heylen, W., Saa, P., Hameyer, H., and Belmans, R.: Statistical energy analysis of acoustic noise vibration for electric motors: transmission from air gap field to motor frame, IEEE IAS 1999 Conf. and Meeting, Oct. 3–7, 1999, pp.1897–1902.
44. Delaere, K., Heylen, W., Belmans, R., and Hameyer, K.: Introducing magnetostriction into coupled magnetomechanical systems, Int. Conf. on Electr. Machines ICEM’2000, Espoo, Finland, 2002, Vol. 1, pp. 174–178.
45. Delaere, K., Heylen, W., Bellmans, R., and Hameyer, K.: Comparison of induction machine stator vibration spectra induced by reluctance forces and magnetostriction, IEEE Trans. on MAG, Vol. 38(2), 2002, pp. 969–972.
46. de La Ree, J. and Boules, N.: Torque production in permanent magnet synchronous motors, IEEE Trans. on IA Vol. 25(1), 1989, pp. 107–112.
47. Demenko, A.: Time-stepping FE analysis of electric motor dirves with semiconductor converters, IEEE Trans. on MAG, Vol. 30(5), 1994, pp. 3264– 3267.
48. Deodhar, R.P., Staton, D.A., Jahns, T.M., and Miller, T.J.E.: Prediction of cogging torque using the flux-MMF diagram technique, IEEE Trans. on IA Vol. 32(3), 1996, pp. 569–576.
49. Dimitriadis, E.K. and Pierce, A.D.: Analytical solution for the power flow exchange between strongly coupled plates under random excitation: A test of statistical energy analysis concepts, J. of Sound and Vibration, Vol. 123(3), 1988, pp. 397–412.
50. Donnell, L.H.: A discussion of thin shell theory, 5th Int. Congress of Appl. Mechanics, Cambridge, MA, U.S.A., 1938, p. 66.
51. Dreyfus, L.: Die Stromwendung Grosse Gleichstrommaschinen, Berlin, Germany, 1929.
52. Elliot, S.: Signal Processing for Active Control, Academia Press, London, U.K., 2001.
53. Ewins, D.J.: Modal Testing: Theory and Practice. Research Studies Press Ltd., 1984.
54. Fahy, F.J.: Measurement of acoustic intensity using the cross-spectral density of two microphone signals, J. Acoust. Soc. Am., Vol. 64, 1977, pp. 1057– 1059.
55. Fahy, F.: Sound and Structural Vibration — Radiation, Transmission, and Response, Academic Press, London, U.K., 1987.
56. Fahy, F. and Mohammed, A.D.: A study of uncertainty in applications of SEA to coupled beam and plate systems. Part 1: Computational experiments, J. of Sound and Vibration, Vol. 158(1), 1992, pp. 45–67.
57. Fahy, F.: Statistical energy analysis: a critical overview, Phil. Trans. R. Soc. Lond. A, Vol. 346, 1994, pp. 431–447.
58. Fahy, F.J.: Sound Intensity, MacMillan, 1995.
59. Favre, E., Cardoletti, L., and Jufer, M.: Permanent magnet synchronous motors: a comprehensive approach to cogging torque suppression, IEEE Trans. on IA Vol. 29(6), 1993, pp. 1141–1149.
60. Finley, W.R.: Noise in induction motors — causes and treatments, IEEE Trans. on IA, Vol. 27(6), 1991, pp. 1204–1213.
61. Finley, W.R. and Burke, R.R.: Proper specifications and installation of induction motors, IEEE IA Magazine, Vol. 3(1), 1997, pp. 56–69.
62. Fredo, C.R.: A SEA-like approach for the derivation of energy flow coefficients with a finite element model, J. of Sound and Vibration, Vol. 199(4), 1997, pp. 645–666.
63. Freise, W. and Jordan, H.: Einseitige magnetische Zugkräfte in Drehstrom-maschinen. etz-Archiv., Vol. 83(9), 1962, pp. 299–303.
64. Frohne, H.: Über die primären Bestimmungsgrössen der Lautstärke bei Asynchronmaschinen, PhD Thesis, Technischen Hochschule Hannover, Fakultät für Maschinenwesen, Hannover, Germany, 1959.
65. Frydrychowicz-Jastrzebska, G.: Influence of slot skewing on reduction of noise level in single-phase motors (in Polish), Przeglad Elektrotechniczny, Vol. 68(1), 1992, pp. 11–14.
66. th Int. Compressor Eng. Conf., Purdue University, West Lafayette, LA, U.S.A., 1986, pp. 566–583.
67. Fyfe, K.R. and Ismail, F.: An investigation of the acoustic properties of vibrating finite cylinders, J. Sound Vib., Vol. 128(3), 1989, pp. 361–375.
68. Gade, S.: Sound intensity, Part 1: Theory, Brüel & Kjaer Technical Review, No. 3, 1982, pp. 3–39.
69. Gade, S.: Sound intensity, Part 2: Instrumentation and applications, Brüel & Kjaer Technical Review, No. 4, 1982, pp. 3–32.
70. Gagliardini, L., Houillon, L., Petrinelli, L., and Borello, G.: Virtual SEA: mid-frequency structure-borne noise modeling based on finite element analysis, SAE Noise and Vibration Conference, Traverse City, MI, U.S.A., 2003, Paper No. 2003-01-1555.
71. Garcia-Otero, S. and Devaney, M.: Minimization of acoustic noise in variable speed induction motors using a modified PWM drive, IEEE Trans. on IA, Vol. 30(1), 1994, pp. 111–115.
72. Garvey, S.D.: The vibrational behaviour of laminated component in electrical machines, 4th Int. Conf. on Electr. Machines and Drives, IEEE, London, U.K., 1989, pp. 226–231.
73. Gieras, J.F.: Electrodynamic forces in electromagnetic levitation systems, Acta Technica CSAV, Prague, Czechoslovakia, 1982, No. 5, pp. 532–545.
74. Gieras, J.F.: Analysis of an inverter-fed double-cage induction motor, South African Universities Power Eng. Conf. SAUPEC’92, Durban, South Africa, 1992.
75. Gieras, J.F. and Wing, M.: Permanent Magnet Motors Technology: Design and Applications, 2nd edition, Marcel Dekker, New York, 1996, 2002.
76. Gieras, J.F. and Marler, M.E.: Analytical prediction of torque ripple in permanent magnet brushless motors, Int. Conf. on Electr. Machines ICEM’02, Brugge, Belgium, 2002, pp. 33–34.
77. Gieras, J.F.: Analytical approach to cogging torque calculation of permanent magnet brushless motors, IEEE Trans. on IA, Vol. 40(5), 2004, pp. 1310–1316.
78. Goldie, J.H.: Reaction Mass Actuators at SatCon, SatCon Publication Boston, MA, U.S.A. 2002.
79. Graham, Q., Beckwith, S., and Milliken, F.H.: Magnetic noise in synchronous machines, AIEE Trans., Sept. 1931, pp. 1056–1062.
80. Greiner, H.: Frequency inverters — motors (in German), EMA Magazine, 1997.
81. Grigoriev, N.V.: Vibration of Power Mechanics, Handbook (in Russian), Machinostroenie, Leningrad, 1974.
82. Habetler, T.G. and Divan, D.M.: Acoustic noise reduction in sinusoidal PWM drives using a randomly modulated carrier, IEEE Trans. on PE, Vol. 6(3), 1991, pp. 356–363.
83. Hanselman, D.C.: Effect of skew, pole count and slot count on brushless motor radial force, cogging torque and back EMF, IEE Proc. 144 (5), 1997, pp. 325–330.
84. Hansen, C.H.: Understanding Active Noise Cancellation, Spon Press (Taylor & Francis Group), London – New York, 2001.
85. Harris, C. M.: Shock and Vibration Handbook, 3rd edition, McGraw Hill, 1988.
86. Hashemi, N.N. and Lisner, R.P.: A new strategy for active control of acoustic noise in converter-fed induction motors, Australian Universities Power Eng. Conf. AUPEC’2002, Melbourne, VIC, Australia, 2002.
87. Heller, B. and Hamata, V.: Harmonic Field Effects in Induction Machines, Academia (Czechoslovak Academy of Sciences), Prague, 1977.
88. Hickiewicz, J., Lukaniszyn, M., Szymaniec, S., and Wach, P.: On reducing the vibration and noise level of induction machines, Int. Conf. on Electr. Machines ICEM’88, Pisa, Italy, 1988, pp. 25–29.
89. Holmer, C.I. and Heymann, F.J.: Transmission of sound through pipe walls in the presence of flow, J. of Sound and Vibration, Vol. 70(3), 1980, pp. 275– 301.
90. Hoppe, R.: Vibrationen eines Ringes in seiner Ebene, J. Math. (Crelle), Vol. 73, 1871.
91. Hopkins, C.: Statistical energy analysis of coupled plate systems with low modal density and low modal overlap, J. of Sound and Vibration, Vol. 251(2), 2002, pp. 193–214.
92. Ishikawa, T. and Slemon, G.: A method of reducing ripple torque in permanent magnet motors without skewing, IEEE Trans. on MAG 29(3), 1993, pp. 2028–2033.
93. IEC 60034-9 Standard Rotating electrical machines, Part 9: Noise limits, 3rd edition, International Electrotechnical Commission, 1997.
94. IEC 60034-9 Standards Rotating electrical machines — Part 9: Noise limits, 4th edition, International Electrotechnical Commission, 2003.
95. IEC 60942 Standards Ed. 3.0 Electroacoustics — Sound calibrators, International Electrotechnical Commission, 2003.
96. IEC 61672-1 Standards Ed. 1.0 Electroacoustics — Sound level meters — Part 1: Specifications, International Electrotechnical Commission, 2002.
97. International Standard ISO 266 Acoustics — Preferred frequencies, 1997.
98. International Standard ISO 2954 Mechanical vibration of rotating and reciprocating machinery: Requirements for instruments for measuring vibration severity, 1975.
99. International Standard ISO 3740 Acoustics — Determination of sound power levels of noise sources: Guidelines for the use of basic standards, 2000.
100. International Standard ISO 3741 Acoustics — Determination of sound power levels of noise sources using sound pressure: Precision methods for reverberation rooms, 1999.
101. International Standard ISO 3742 Acoustics — Determination of sound power levels of noise sources: Precision methods for discrete-frequency and narrow-band sources in reverberation rooms, 1988.
102. International Standard ISO 3744 Acoustics — Determination of sound power levels of noise sources using sound pressure: Engineering method in an essentially free field over a reflecting plane, 1994.
103. International Standard ISO 3745 Acoustics — Determination of sound power levels of noise sources using sound pressure: Precision methods for anechoic and hemi-anechoic rooms, 2003.
104. International Standard ISO 3746 Acoustics — Determination of sound power levels of noise sources using sound pressure: Survey method using an enveloping measurement surface over a reflecting plane, 1995.
105. International Standard ISO 3747 Acoustics — Determination of sound power levels of noise sources: Survey method using a reference sound source, 1987.
106. International Standard ISO 3747 Acoustics — Determination of sound power levels of noise sources using sound pressure — Comparison method in situ, 2000.
107. International Standard ISO 9614-1 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points, 1993.
108. International Standard ISO 9614-2 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning, 1996.
109. International Standard ISO 9614-2 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning, 2002.
110. International Standard ISO 5348-3 Mechanical vibration and shock — Mechanical mounting of accelerometers, 1998.
111. International Standard ISO 9614 Acoustics — Determination of the sound power levels of noise sources using sound intensity measurements, 1993.
112. International Standard ISO 3745 Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines, 1999.
113. Ishibashi, F., Noda, S., and Mochizuki, M.: Numerical simulation of electromagnetic vibration of small induction motors, Proc. IEE, Part B: Electric Power Appl., Vol. 145(6), 1998, pp. 528–534.
114. Ishibashi, F., Kamimoto, K., Noda, S., and Itomi, K.: Small induction motor noise calculation, IEEE Trans. on EC, Vol. 18(3), 2003, pp. 357–361.
115. Jang, G.H. and Chang, J.H.: Numerical analysis of the electromechani-cally coupled magnetic field in brushless d.c. motors, J. of Magnetism and Magnetic Materials, Elsevier, Vol. 226–230, 2001, pp. 1223–1225.
116. Jeyapalan, R.K. and Richards, E.J.: Radiation efficiencies of beams in flex-tural vibration, J. Sound and Vibration, Vol. 67(1), 1979, pp. 55–67.
117. Jahns, T.M.: Torque production in permanent magnet motor drives with rectangular current excitation, IEEE Trans. on IA, Vol. 20(4), 1984, pp. 803–813.
118. Jiao, G. and Rahn, C.D.: Field weakening for radial force reduction in brushless permanent magnet d.c. motors, IEEE Trans. on MAG, Vol. 40(5), 2004, pp. 3286–3292.
119. Jordan, H.: Geräuscharme Elektromotoren, Verlag W. Girardet, Essen, 1950.
120. Kaiser, E.R.: Acoustical vibration of rings, J. Acoust. Soc. Am., Vol. 25(4), 1953, pp. 617–623.
121. Kataja, J. and Antila, M.: Selection of active noise control strategy, Joint Baltic-Nordic Acoustic Meeting JBNAM’04, Mariehamn, Aland, Norway, 2004.
122. Kelly, S.G.: Fundamentals of Mechanical Vibrations, 2nd edition, McGraw-Hill Science/Engineering/Math, 2000.
123. Ketteler, K.H.: Über den Einfluss der Wicklungsschaltung in Induktion-maschinen auf die Zusatzverluste und den einsetigen magnetischen Zug. etz-Archiv, Vol. 106(3), 1984, pp. 99–106.
124. Kinsler, L.E., Frey, A.R., Coppens, A.B., and Sanders, J.V.: Fundamentals of Acoustics, John Wiley & Sons, New York, 3rd edition, 1982, 4th edition, 2000.
125. Kowal, J., and Ornacki, R.: Analysis of properties of actuators used in vibration control systems, Int. Carpathian, Conf. ICCC’02, Malenovice, Czech Republic, 2002, pp. 791–796.
126. Kubota, Y. and Dowell, E.H.: Experimental investigation of asymptotic modal analysis for a rectangular plate, J. of Sound and Vibration, Vol. 106(2), 1986, pp. 203–216.
127. Kwasnicki, S.: Magnetic Noise of Cage Induction Motors (in Polish), BO-BREME Komel, Katowice, Poland, 1998.
128. Lalor, N.: Practical considerations for the measurement of internal and coupling loss factors on complex structures, ISVR Technical Report No.182, June 1990.
129. Langley, R.S.: A derivation of the coupling loss factors used in statistical energy analysis, J. of Sound and Vibration, Vol. 141(2), 1990, pp. 207–219.
130. Langley, R.S. and Heron, K.H.: Elastic wave transmission through plates/beam junctions, J. of Sound and Vibration, Vol. 143(2), 1990, pp. 241–253.
131. Langley, R.S. and Bremer, P.G.: A hybrid method for the vibration analysis of complex structural-acoustic systems, J. Acoust. Soc. Am., Vol. 106, 1999, pp. 1657–1671.
132. Langley, R.S. SEA: Current and future research needs, Proceedings of the 1st Int. Auto SEA Users Conf., San Diego, CA, U.S.A., July 27–28, 2000, pp. 126–135.
133. Langley, R.S. and Cotoni, V.: Response variance prediction in the statistical energy analysis of built-up systems, J. Acoust. Soc. Am., Vol. 115, 2004, pp. 706–718.
134. Laulagnet, B. and Guyader, J.L.: Modal analysis of shell’s acoustic radiation in light and heavy fluids, J. Sound and Vibration, Vol. 131, 1989, pp. 397–415.
135. Leissa, A.: Vibration of Shells, Acoustic Society of America, American Ins. of Physics, 1993.
136. Li, T. and Slemon, G.: Reduction of cogging torque in permanent magnet motors, IEEE Trans. on MAG, Vol. 24(6), 1988, pp. 2901–2903.
137. Lisner, R.P. and Timar, P.L.: A new approach to electric motor acoustic noise standards and test procedures, IEEE Trans. on EC, Vol. 14(3), 1999, pp. 692–697.
138. Lo, W.C., Chan, C.C., Zhu, Z.Q., Xu, L., and Howe, D.: Acoustic noise radiated by PWM-controlled induction machine drives, IEEE Trans. IE 47(4), 2000, pp. 880–889.
139. Lyon, R.H. and Maidanik, G.: Power flow between linearly coupled oscillators, J. Acoust. Soc. Am., Vol. 34(5), 1962, pp. 623–639.
140. Lyon, R.H.: Statistical Energy Analysis of Dynamical Systems: Theory and Applications, MIT Press, Cambridge, MA, U.S.A., 1975.
141. Lyon, R.H. and DeJong, R.G.: Theory and Application of Statistical Energy Analysis, 2nd edition, Butterworth-Heinemann, 1995.
142. Mace, B.R.: On the statistical energy analysis hypothesis of coupling power proportionality and some implications of its failure, J. Sound and Vibration, Vol. 178, 1994, pp. 95–112.
143. Mace, B.R.: Frequency averaging effects in SEA, 3rd Int. Congress on Air-and Structure-Borne Sound and Vibration, Montreal, Canada, 1994, pp. 177–184.
144. Mace, B.R. and Shorter, P.J.: Energy flow models from finite element analysis, J. Sound and Vibration, Vol. 233, 2000, pp. 369–389.
145. Mace, B.R.: Statistical energy analysis, energy distribution modes and system modes, J. Sound and Vibration, Vol. 264, 2003, pp. 391–409.
146. Maidanik, G.: Response of ribbed panels to reverberant acoustic field, J. Acoust. Soc. Am., Vol. 34, 1962, pp. 809–826.
147. Malfait, R., Reekmans, R., and Belmasn, R.: Audible noise and losses in variable speed induction motor drives with IGBT inverters — Influence of design and switching frequency, 29th IEEE IAS Annual Meeting, Denver, CO, U.S.A., Vol. 1, 1994, pp. 693–700.
148. Mališev, V.S., Medvedev, V.T., Karwacki, W., and Kostowski, A.: Influence of eccentricity on magnetic forces producing vibrations in induction motors (in Russian), 25th Symp. of Electr. Machines, Lodz, Poland, 1990, pp. 1–7.
149. Maliti, K.C.: Modeling and analysis of magnetic noise in squirrel-cage induction motors, Royal Inst. of Techn. (KTH), Stockholm, Sweden, 2000.
150. Manning, J.E. and Maidanik, G.: Radiation properties of cylindrical shells, J. Acoust. Soc. Am., Vol. 36, 1964, pp. 1691–1698.
151. Manning, J.E.: Formulation of SEA parameters using mobility functions, Phil. Trans. of Royal Society London, Pt. A, Vol. 346, 1994, pp. 477–488.
152. Martinez-Munoz, D. and Lai, J.C.S.: Acoustic noise prediction in a vector controlled induction machine, Int. Electr. Machines and Drives Conf. IEMDC’03, Madison, WI, U.S.A., 2003, pp. 104–110.
153. Martinez-Munoz, D., Lai, J.C.S., and Alakula, M.: A study of the acoustical properties of stators with an outer-surface layer of air gaps, EPE 2003, Toulouse, France.
154. McDevitt, T.E., Campbell, R.L., and Jenkins, D.M.: An investigation of induction motor zeroth-order magnetic stresses, vibration, and sound radiation, IEEE Trans. on MAG, Vol. 40(2), 2004, pp. 774–777.
155. Miller, V.R. and Faulkner, L.L.: Predication of aircraft interior noise using the statistical energy analysis method, ASME, J. of Vibration, Acoustics, Stress and Reliability in Design, Vol. 105, 1983, pp. 512–518.
156. Mohan, N., Undeland, T.M., and Robbins, W.P.: Power Electronics: Converters, Applications, and Design, John Wiley & Sons, New York – Chichester – Brisbane – Toronto – Singapore, 1989.
157. Müller, G.G., Black, R., and Davis, T.E.: The diffraction produced by cylindrical and cubical obstacles and by circular and square plates, J. Acoust. Soc. Am., Vol. 10, 1938, p. 6.
158. Mohammed, O.A., Calvert, T., and McConnel, R.: Coupled magnetoelas-tic finite element formulation including anisotropic reluctivity tensor and magnetostriction effects for machinery applications, IEEE Trans. on MAG, Vol. 37(5), 2001, pp. 3388–3392.
159. Mohammed, O.A., Liu, S., and Ganu, S.C.: Computation of transient magneto-mechanical problems in electrical machines, IEEE Southeast Conf., Columbia, SC, U.S.A., 2002, pp. 187–191.
160. Morse, P.M. and Ingard, K.U.: Theoretical Acoustics, McGraw-Hill, New York, 1968.
161. Nau, S.L. and Gomez Mello, H.G.: Acoustic noise in induction motors: Causes and solutions, 35th IEEE IAS Annual Conf. and Meeting, Rome, Italy, 2000, pp. 253–263.
162. NEMA General standards applying to all machines — Part 9: Rotating Electrical Machines — Sound power limits and measurement procedures, National Electrical Manufacturers Association, 1998.
163. Neves, C.G.C., Carslon, R., Sadowski, N., Bastos, J.P.A., Soeiro, N.S., and Gerges, S.N.Y.: Experimental and numerical analysis of induction motor vibrations, IEEE Trans. MAG, Vol. 35(3), 1999, pp. 1314–1317.
164. Neves, C.G.C., Carslon, R., Sadowski, N., Bastos, J.P.A., Soeiro, N.S., and Gerges, S.N.Y.: Calculation of electromechanic-mechanic-acoustic behavior of a switched reluctance motor, IEEE Trans. MAG, Vol. 36(4), 2000, pp. 1364–1367.
165. Newland, D.E.: Power flow between a class of coupled oscillators, J. Acoust. Soc. Am., Vol. 43(3), 1968, pp. 553–559.
166. Noda, S., Mori, S., Ishibashi, F., and Itomi, K.: Effect of coils on natural frequencies of stator cores in small induction motors, IEEE Trans. on EC., Vol. 2(1), 1987, pp. 93–99.
167. Norman, H.M.: Induction motor locked saturation curves, AIEE Trans. Electr. Eng., April 1934, pp. 536–541.
168. Norton, M.P.: Fundamentals of Noise and Vibration Analysis for Engineers, Cambridge University Press, Sydney, Australia, 1989.
169. Nowacki, W.: Dynamics of Elastic Systems, John Wiley & Sons, New York, 1963.
170. Olson, H.F.: System responsive to the energy flow of sound waves, U.S. Patent No. 1892644, 1932.
171. Operation and Maintenance Manual, Teco Westinghouse Motor Company, Round Rock, TX, U.S.A., 2000.
172. Oppenheimer, C.H. and Dubowsky, S.: A radiation efficiency for unbaffled plates with experimental validation, J. Sound and Vibration, Vol. 199(3), 1997, pp. 473–489.
173. Ostovic, V.: Dynamics of Saturated Electric Machines, Springer-Verlag, New York, 1989.
174. Parrett, A.V., Hicks, J.K., Burton, T.E., and Hermans, L.: Statistical energy analysis of airborne and structure-borne automobile interior noise, Paper No. 971970, SAE Noise and Vibration Conf., Traverse City, MI, U.S.A., 1997.
175. Permanent magnet motor with low cogging torque by simulated magnetic field analysis, Shin-Etsu Chemical Co. Ltd., Magnetic Materials Research Center, Takefu-shi, Fukui Prefecture, Japan, 1999.
176. Pierce, A.D.: Acoustics: An Introduction to Its Physical Principles and Applications, McGraw-Hill, Sydney, Australia, 1981.
177. Pillay, P. and Krishnan, R.: An investigation into the torque behavior of a brushless d.c. motor, 23rd IEEE IAS Annual Meeting, New York, 1988, pp. 201–208.
178. Pillay, P. and Krishnan, R.: Modelling, simulation, and analysis of permanent magnet motor drives, Part 1 and 2, IEEE Trans. on IA 25(2), 1989, pp. 265–279.
179. Purkemani, M.: Beitrag zur Erfassung der Sättigungsoberfelder in Drehstromasynchromaschinen, PhD Thesis, Technischen Hochschule Hannover, Fakultät für Maschinenwesen, Hannover, Germany, 1971.
180. Randall, R.: Frequency Analysis, Brüel & Kjaer Technical Handbook, 1987.
181. Rockwood, W.B.: Statistical energy analysis applied to structural borne noise in marine structures, ASME Symposium, Boston, MA, U.S.A., 1987.
182. Sandman, B.E.: Fluid-loading influence coefficients for a finite cylindrical shell, J. Acoust. Soc. Am., Vol. 60, 1976, pp. 1256–1264.
183. Scharton, T.D. and Lyon, R.H.: Power flow and energy sharing in random vibration, J. Acoust. Soc. Am. Vol. 43(6), 1968, pp. 1332–1343.
184. Schenck, H.A.: Improved integral formulation for acoustic radiation surface, J. Acoust. Soc. Am., Vol. 44, 1968, pp. 41–58.
185. Schlichting, H.: Boundary Layer Theory, 6th edition, McGraw Hill, New York, 1966.
186. Serridge, M. and Licht, T.R.: Piezoelectric Accelerometers and Vibration Preamplifiers, Brüel and Kjaer Technical Handbook, 1986.
187. Shubov, I.G.: Noise and Vibration of Electrical Machines (in Russian), Energia, Leningrad, 1974, 2nd edition, Energoatomizdat, Leningrad, 1986.
188. Silbiger, A.J.: Radiation from circular pistons of elliptical profile, J. Acoust. Soc. Am., Vol. 33, 1961, pp. 1515–1592.
189. Smith, P.W.: Statistical models of coupled dynamic systems and the transition from weak to strong coupling, J. Acoust. Soc. Am., Vol. 65, 1979, pp. 695–698.
190. Soedel, W.: Vibrations of Shells and Plates, 2nd edition, New York, Marcel Dekker, Inc., 1993.
191. Soize, C.: A model and numerical method in the medium frequency range for vibro-acoustic predictions using the theory of structural fuzzy, J. Acoust. Soc. Am., Vol. 94, 1993, pp. 849–865.
192. Stepanishen, P.R.: Radiated power and radiation loading of cylindrical surfaces with nonuniform velocity distributions, J. Acoust. Soc. Am., Vol. 63, 1978, pp. 328–338.
193. Stepanishen, P.R.: Modal coupling in the vibration of fluid-loaded cylindrical shells, J. Acoust. Soc. Am., Vol. 71, 1982, pp. 813–823.
194. Strelkov, S.P.: Mechanics, Mir Publishers, Moscow, Russia, 1978.
195. Sun, J.C., Wang, C., and Sun, Z.H.: Power flow between three series coupled oscillators, J. Sound and Vibration, Vol. 189(2), 1996, pp. 215–229.
196. Sun, Z.H., Sun, J.C., Wang, C. and Sheng, M.P.: Analysis of the causes of formation of negative loss factors, Chinese Journal of Acoustics, Vol. 15(3), 1996, pp. 239–246.
197. SYSNOISE Manual Book, NIT, Belgium, 1993.
198. Szechenyi, E.: Modal densities and radiation efficiencies of unstiffened cylinders using statistical methods, J. Sound and Vibration, Vol. 19(1), 1971, pp. 65–81.
199. Thomson, W.T.: Theory of Vibration with Applications, 2nd edition, Prentice Hall, 1981.
200. Timar, P.L., Fazekas, A., Kiss, J., Miklos, A. and Yang, S.J.: Noise and Vibration of Electrical Machines, Elsevier, Amsterdam – Oxford – New York – Tokyo, Japan, 1989.
201. Timar, P.L. and Lai, J.C.S.: Acoustic noise of electromagnetic origin in an ideal frequency-converter-driven induction motor, IEEE Proc. Electr. Power Appl., 141(6), 1994, pp. 341–346.
202. Timar, P.L. and Lai, J.C.S.: Analysis of the effects of time harmonics on the radiated sound power of variable speed induction motors, Internoise’96, Liverpool, U.K., 1996, pp. 445–448.
203. Timoshenko, S.: Theory of Plates and Shells, McGraw Hill, 1940.
204. Titan Large A.C. Electric Motors: Installation, Operation, and Maintenance Manual, U.S. Motors Division, Emerson Electric Co., St Louis, MO, U.S.A., 1999.
205. Toader, S.: Combined analytical and finite element approach to the field harmonics and magnetic forces in synchronous machines, Int. Conf. on Electr. Machines ICEM’94, Paris, France, Vol. 3, 1994, pp. 583–588.
206. Tsivitse, P.J. and Weishsmann, P.R.: Polyphase induction motor noise, IEEE Trans. on IGA, Vol. 7(3), 1971, pp. 339–358.
207. Tso, Y.K. and Hansen, C.H.: The prediction of structure-borne noise transmission in ships using statistical energy analysis, Acoustics Australia, Vol. 25(3), 1997, pp. 97–102.
208. Twomey, W.J., Chen, T.L.C., Ojalvo, I.U., and Ting, T.: General method for modifying a finite element model to correlate with modal test data, J. of the American Helicopter Soc., Vol. 36(3), 1991, pp. 48–58.
209. Vandevelde, L. and Melkebeek, J.A.A.: Calculation of radial magnetic forces for the analysis of noise and vibrations of squirrel-cage induction motors, 8th IEE Int. Conf. on Electr. Machines and Drives EMD’97, 1997, London, U.K., pp. 86–90.
210. Vandevelde, L. and Melkebeek, J.A.A.: Magnetic forces and magnetostriction in electrical machines and transformer cores, IEEE Trans. on MAG, Vol. 39(3), 2003, pp. 1618–1621.
211. Vandevelde, L., Gyselinck, J., De Wulf, M.A.C., and Melkebeek, J.A.A.: Finite-element computation of the deformation of ferromagnetic material taking into account magnetic forces and magnetostriction, IEEE Trans. on MAG, Vol. 40(2), 2004, pp. 565–568.
212. Ver, I.L. and Holmer, C.I.: In Noise and Vibration Control (Beranek, L.L., ed.), McGraw-Hill, New York, 1971, pp. 287–296.
213. Verdyck, D. and Belmans, R.J.M.: An acoustic model for a permanent magnet machine: Modal shapes and magnetic forces, IEEE Trans. on IA, Vol. 30(6), 1994, pp. 1625–1631.
214. Verma, S.P. and Girgis, R.S.: Method of accurate determination of resonant frequencies and vibration behavior of stators of electrical machines, IEE Proc. Pt. A, Vol. 128(1), 1981, pp. 1–11.
215. Verma, S.P. and Girgis, R.S.: Experimantal verification of resonant frequencies and vibration behavior of stators of electrical machines, IEE Proc. Pt. B, Vol. 128(1), 1981, pp. 12–32.
216. Verma, S.P. and Yang, Y.: Electromagnetic acoustic noise and vibrations of cylindrical rotor synchronous machines, Int. Conf. on Electr. Machines ICEM’94, Paris, France, Vol. 3, 1994, pp. 431–436.
217. Vibration Isolation of Fans, Engineering Data ED-1900, Twin City Fan Companies, Ltd., Minneapolis, MN, U.S.A., 2001.
218. Vlahopoulos, N. and Zhao, X.: Basic development of hybrid finite element method for midfrequency structural vibrations, AIAA Journal, Vol. 37 (11), 1999, pp. 1495–1505.
219. Voldek, A.I.: Electrical Machines (in Russian), 2nd edition, Energia, Leningrad, Russia, 1974.
220. Walker, J.H. and Kerruish, N.: Open-circuit noise in synchronous machines, Proc. IEE, Part A, Vol. 107(36), 1960, pp. 505–512.
221. Wallace, C.E.: Radiation resistance of a rectangular panel, J. Acoust. Soc. Am., Vol. 51(3), 1972, pp. 946–952.
222. Wang, M.Q., Sheng, M.P., and Sun, J.C.: The direct and indirect power flow of three non-conservatively series couples oscillators, J. Sound and Vibration, Vol. 212(2), 1998, pp. 231–251.
223. Wang, C., Lai, J.C.S., and Pulle, D.W.J.: A statistical method for the prediction of acoustic noise radiation from induction motors, European Power Electronics Conf. EPE’99, 1999, Lausanne, Switzerland, Vol. 8, pp. 1–8.
224. Wang, C. and Lai, J.C.S.: Vibration analysis of induction motors, J. Sound and Vibration, Vol. 224(4), 1999, pp. 733–756.
225. Wang, C. and Lai, J.C.S.: Modeling the vibration behavior of an induction motor, J. Acoust. Soc. Am., Vol. 103(5) 1998, p. 3084.
226. Wang, C. and Lai, J.C.S.: Prediction of natural frequencies of finite length circular cylindrical shells, Appl. Acoustics, Vol. 59(4), 2000, pp. 385–400.
227. Wang, C. and Lai, J.C.S.: The sound radiation efficiency of finite length acoustically thick circular cylindrical shells under mechanical excitation I: Theoretical analysis, J. Sound and Vibration, Vol. 232(2), 2000, pp. 431– 447.
228. Wang, C., and Lai, J.C.S.: The sound radiation efficiency of finite length circular cylindrical shells under mechanical excitation II: Limitations of the infinite length model, J. Sound and Vibration, Vol. 241(5), 2001, pp. 825– 838.
229. Wang, C., Astfalck, A., and Lai, J.C.S.: Sound power radiated from an inverter driven induction motor: Experimental investigation, IEE Proc. Pt. B. Electr. Power Application, Vol. 149(1), 2002, pp. 46–52.
230. Wang, C., Lai, J.C.S., and Pulle, D.W.J.: Prediction of acoustic noise from variable-speed induction motors: Deterministic versus statistical approaches, IEEE Trans. on IA, Vol. 38(4), 2002, pp. 1037–1044.
231. Wang, C. and Lai, J.C.S.: Discussions on the number of modes required for statistical energy analysis-based calculations, J. Sound and Vibration, 2005, Vol. 281, 2005, pp. 475–481.
232. Wang, C., Lai, J.C.S., and Astfalck, A.: Sound power radiated from an inverter driven induction motor II: Numerical analysis, Proc. IEE: Electr. Power Application, Vol. 151(3), 2004, pp. 341–348.
233. Wang, C. and Lai, J.C.S.: Sound power radiated from an inverter driven induction motor: Statistical energy analysis, IEE Proc., Pt. B Elect. Power Appl., 2005, Vol. 152(3), 2005, pp. 619–626.
234. Waser, M.P. and Crocker, M.J.: Introduction to the two microphone cross-spectral method of determining sound intensity, Noise Control Eng., Vol. 22, 1984, pp. 76–84.
235. Watanabe, S., Kenjo, S., Ide, K., Sato, F., and Yamamoto, M.: Natural frequencies and vibration behaviour of motor stators, IEEE Trans. on PAS, Vol. 102(1), 1983, pp. 949–956.
236. Weber, W.: Der Nutungsfaktor in elektrischen Maschinen, ETZ, 1928, pp. 858–861.
237. Wester, E.C.N. and Mace, B.R.: Statistical energy analysis of two edge-coupled rectangular plates: Ensemble averages, J. Sound and Vibration, Vol. 193(4), 1996, pp. 793–822.
238. Williams, W. Parke, F.G. Moran, D.A., and Sherman, C.H.: Acoustic radiation from a finite cylinder, J. Acoust. Soc. Am., Vol. 36, 1964, pp. 2316– 2322.
239. Witczak, P.: Determination of mechanical vibration caused by magnetic forces in induction motors (in Polish), DSc. Thesis, Technical University of Lodz, Zesz. Nauk. No. 725, Lodz, Poland, 1995.
240. Witczak, P.: Calculations of force densities distribution in electric machinery by means of the magnetic stress tensor, Archiwum Elektrotechniki, Warsaw, Poland, 1996, No. 2, pp. 145–160.
241. Witczak, P. and Brudny, J.F.: Calculations of magnetic vibration forces in induction motors, Zeszyty Naukowe PL Elektryka No. 789, Lodz, Poland, 1998, pp. 37–44.
242. Witczak, P.: Magnetic vibration forces in induction motors, Int. Workshop on Electr. and Magn. Fields, 1996, Liege, Belgium, pp. 255–260.
243. Woodhouse, J.: An introduction to statistical energy analysis of structural vibration, Appl. Acoustics, Vol. 14, 1981, pp. 455–469.
244. X2C A.C. Inverters, TB Wood’s, Chambersburg, PA, U.S.A., 2003, www.tbwoods.com.
245. Yacamini, R. and Chang, S.C.: Noise and vibration from induction machines fed from harmonic sources, IEEE Trans. on EC 10(2), 1995, pp. 286–292.
246. Yahiaoui, A. and Bouillault, F.: 2D and 3D numerical computation of electrical parameters of an induction motor, IEEE Trans. on MAG, Vol. 30(5), 1994, pp. 3690–3692.
247. Yang, S.J.: Finite element method in evaluating the stator natural frequencies of small machines, Int. Conf. on Electrical Machines ICEM ’78, 1978, Brussels, Belgium.
248. Yang, S.J.: Low-Noise Electrical Motors, Clarendon Press, Oxford, 1981.
249. Yap, F.F. and Woodhouse, J.: Investigation of damping effects on statistical energy analysis of coupled structures, J. Sound and Vibration, Vol. 197(3), 1996, pp. 351–371.
250. Zhang, Q. J. and Sainsbury, M. G.: The energy flow method for strongly coupled systems, 17th Int. Modal Analysis Conf., FL, U.S.A., 1999, pp. 1839– 1845.
251. Zhang, Q.J., Wang, C., Wang, D., Qian, M., Nack, W., and Pamidi, P.R.: Energy flow method for mid-frequency vibration analysis, SAE Noise and Vibration Conf., Traverse City, MI, U.S.A., 2003, Paper No. 2003-01-1454.
252. Zhu, Z.Q. and Howe, D.: Finite element analysis of acoustic power radiated by electrical machines, Proc. Inst. Acoust., Vol. 12(6), 1990, p. 29–36.
253. Zhu, Z.Q. and Howe, D.: Analytical prediction of the cogging torque in radial field permanent magnet brushless motors, IEEE Trans. on MAG, Vol. 28(2), 1992, pp. 1371–1374.
254. Zhu, Z.Q. and Howe, D.: Electromagnetic noise radiated by brushless permanent magnet d.c. drives, Electr. Machines and Drives Conf., Oxford, U.K., 1993, pp. 606–611.
255. Zhu, Z.Q. and Howe, D.: Improved methods for prediction of electromagnetic noise radiated by electrical machines, IEE Proc. of the Electric Power Applications, Vol. 141, 1994, pp. 109–120.
256. Zhu, Z.Q. and Howe, D.: Influence of design parameters on cogging torque in permanent magnet machines, IEEE Trans. on EC 15(4), 2000, pp. 407–412.