Environmentally benign tribo-systems for metal forming

CIRP Annals - Manufacturing Technology

Volumn 59, Issue 2, 2010, Pages 760-780

  Bay, N ^a   Azushima, A ^b   Groche, P ^c   Ishibashi, I ^d   Merklein, M ^e   Morishita, M ^f   Nakamura, T ^g   Schmid, S ^h   Yoshida, M ⁱ  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b YOKOHAMA NATIONAL UNIVERSITY   (Japan)

^c Technical University   (Germany)

^d Sumico Lubricants Co   (Japan)

^e UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^f TOYOTA MOTOR CORPORATION   (Japan)

^g SHIZUOKA UNIVERSITY   (Japan)

^h University of Notre Dame   (United States)

ⁱ Nihon Parkerizing CO Ltd   (Japan)

Author keywords

Environmental impact; Lubricants; Metal forming tribology; Structured tool surfaces; Structured workpiece surfaces; Tool coatings; Tool materials

Indexed keywords

TOOL COATING; TOOL COATINGS; TOOL MATERIALS; TOOL SURFACES; WORK PIECES;

COATINGS; ENVIRONMENTAL IMPACT; LUBRICANTS; METAL FORMING; METAL WORKING; METALS; PAPER SHEETING; PUNCHING; TRIBOLOGY; UPSETTING (FORMING);

SURFACES;

EID: 77955577489     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2010.05.007     Document Type: Article

References (221)

1. J.L. Andreasen, N. Bay, M. Andersen, E. Christensen, and N. Bjerrum Screening the Performance of Lubricants for Ironing of Stainless Steel with a Strip Reduction Test Wear 207 1997 1 5
2. J.L. Andreasen, N. Bay, and L. De Chiffre Quantification of Galling in Sheet Metal Forming by Surface Topography Characterisation International Journal of Machine Tools and Manufacture 38 5-6 1998 503 510
3. J.L. Andreasen, D.D. Olsson, K. Chodnikiewicz, and N. Bay Bending Under Tension Test with Direct Friction Measurement IMechE Part B: Journal of Engineering Manufacture 220 2006 73 80
4. Anon (1999) European Union Risk Assessment Report, alkanes, C10-13, chloro (CAS No. 85535-84-8).
5. Anon (2002) Council regulations on existing substances (793/93/EEC). Risk assessment of alkanes, C14-17, chloro (CAS No. 85535-85-9).
6. Anon Development of Replacements for Phoscoating Used in Forging, Extrusion and Metal Forming Processes 2003 National Center for Manufacturing Sciences Ann Arbor, MI, USA
7. Anon, Replaceable Lubricants to Phosphate/Soap Treatment, Technical Bulletin of Daido Chemical Industry Co.
8. M. Arentoft, N. Bay, T. Tang, and J.D. Jensen A New Lubricant Carrier for Metal Forming Annals of the CIRP 58 1 2009 243 246
9. N. Asaba Non-conversion Coating Lubricants for Cold Forging Anti-corrosion Management 45 87 2001 426 429 (in Japanese)
10. A. Azushima Development of a Simulation Testing Machine for Evaluating the Lubricity of Lubricant in Cold Sheet Rolling Journal of the Iron and Steel Institute of Japan 74 4 1988 696 702 (in Japanese)
11. A.Y. Azushima Evaluation System for using the Newly Developed Oil in Actual Cold Mill Journal of the Iron and Steel Institute of Japan 76 8 1990 1270 1276 (in Japanese)
12. A. Azushima, M. Uda, and H. Kudo An Interpretation of the Speed Dependence of the Coefficient of Friction under the MicroPHL Condition in Sheet Drawing Annals of the CIRP 40 1 1991 227 230
13. A. Azushima Direct Observation of Contact Behaviour to Interpret the Pressure Dependence of the Coefficient of Friction in Sheet Metal Forming Annals of the CIRP 44 1 1995 209 212
14. A. Azushima, Y. Jimbo, and S. Setoguchi Effect of Roll Material on Lubrication Characteristics in Cold Sheet Rolling Proceed. 7th Int. Conf. on Steel Rolling Chiba, Japan 1998 446 451
15. A. Azushima, J. Miyamoto, and H. Kudo Effect of Surface Topography of Work Piece on Pressure Dependence of Coefficient of Friction in Sheet Metal Forming Annals of the CIRP 47 1 1998 479 482
16. A. Azushima, M. Natsui, S. Inagaki, and T. Sugai Explanation of Lubricant Behavior by Means of Oil Film Measurement on Rolled Sheet Surface Measured by Fluorescence Method Journal of the Iron and Steel Institute of Japan 86 11 2000 755 760
17. A. Azushima, W.D. Xue, and Y. Yoshida Lubrication Mechanism in Hot Rolling by Newly Developed Simulation Testing Machine Annals of the CIRP 56 1 2007 297 300
18. A. Azushima, W.-D. Xue, and Y. Yoshida Influence of Lubricant Factors on Coefficient of Friction and Clarification of Lubrication Mechanism in Hot Rolling ISIJ, The Iron and Steel Institute of Japan 49 6 2009 868 873
19. A. Azushima, Y. Nakata, and T. Toriumi Prediction of Effect of Rolling Speed on Coefficient of Friction in Hot Sheet Rolling of Steel using Sliding-Rolling Simulator Journal of Materials Processing Technology 210 1 2010 110 115
20. R. Balbach, and K. Lange Influence of Various Surface Microstructures on the Tribology in Aluminium Sheet Metal Forming Annals of the CIRP 36 1 1987 181 184
21. P.F. Bariani, G. Berti, T. Dal Negro, and S. Masiero Experimental Evaluation and FE Simulation of Thermal Conditions at Tool Surface During Cooling and Deformation Phases in Hot Forging Operations Annals of the CIRP 51 1 2002 219 222
22. C. Barus Isothermals, Isopiestics and Isometrics Relative to Viscosity American Journal of Science 45 1893 87 96
23. N. Bay, and T. Wanheim Contact Phenomena Under Bulk Plastic Deformation Conditions. Keynote Paper at Symp. on Lubrication Mechanisms in Metal Forming Proceed. 3rd Int. Conf. on Technol. of Plasticity Kyoto 4 1990 1677 1691
24. N. Bay The State of the Art in Cold Forging Lubrication Journal of Materials Processing and Technology 46 1994 19 40
25. N. Bay, D.D. Olsson, and J.L. Andreasen Lubricant Test Methods for Sheet Metal Forming Tribology International 41 9 2008 844 853
26. J. Bech, N. Bay, and M. Eriksen A Study of Mechanisms of Liquid Lubrication in Metal Forming Annals of the CIRP 47 1 1998 221 226
27. P. Becher Emulsions: Theory and Practice 2nd ed 1965 Reinhold Publishing New York
28. Bertell JW (1983) Synthetic Hot Forging Lubricants and Process. US Patent 4,409,113.
29. Bjerrum NJ, Christensen E, Steenberg T (1996/2002) Method for electrochemical phosphating of metal surfaces, Danish patent, No. 0910/96/US patent, US 6,346,186 B1.
30. T. Bolch, R. Linde, M. Metzner, and K. Müll Innovative Oberflächenstrukturen durch elektrochemische Beschichtungs-verfahren Galvanotechnik 103 9 2005 2095 2100
31. F. Borsetto, A. Ghiotti, and S. Bruschi Investigation of the High Strength Steel Al-Si Coating During Hot Stamping Operations Key Engineering Materials 410-411 2009 289 296
32. F. Borsetto, A. Ghiotti, S. Bruschi, T. Stoehr, J. Lechler, and M. Merklein Interlaboratory comparison of friction conditions in hot stamping operations Key Engineering Materials 438 2010 97 105
33. Brans D (2009) Rhenus Lub GmbH & Co KG, personal communication with N. Bay.
34. P.M. Cann, H.A. Spikes, and J. Hutchinson The Development of a Spacer Layer Imaging Method (SLIM) for Mapping Elastohydrodynamic Contacts Tribology Transactions 39 4 1996 915 921
35. S. Cassarini, M. Laugier, and P. Montmitonnet Modelling of Metal Forming Lubrication by o/w Emulsions N. Bay, Proceed. 2nd Int. Conf. Trib. Manufacturing Nyborg, Denmark 2004 713 720
36. J.L. Cavallo, D.L. Chang, and F.Z. Saleeb Formulation Considerations in Emulsion Preparation and Stability In Food Emulsions and Foams-Theory and Practice AIChE Symposium Series V 86 1991 16 24
37. H. Cesur, B. Kaftanoglu, A. Kalkanli, and B. Oral Deposition of Boron Nitride Coatings on Steel Substrates by RF Magnetron Sputtering 7th ICMEN & 3rd THE Coatings Conferences Kassandra, Greece 2008
38. H. Cesur, Kaftanoglu, and T. Ôzel Machining Performance of CBN Coated Cutting Tool for Die/Mold Applications 5th Int. Conf. and Exhib. on Design and Production of Machines and Dies/Molds Kusadasi, Turkey 2009
39. S. Chandrasekharan, H. Palaniswamy, N. Jain, G. Ngaile, and T. Altan Evaluation of Stamping Lubricants at Various Temperature Levels using the Ironing Test International Journal of Machine Tools and Manufacture 45 2005 379 388
40. U.C. Chen, Y.S. Liu, C.C. Chang, and J.F. Lin The Effect of the Additive Concentration in Emulsions to the Tribological Behavior if a Cold Rolling Tube under Sliding Contact Tribology International 35 2002 309 325
41. ® Technology for Wiredrawing Wire Journal International 37 6 2004 67 69
42. E. Daouben, A. Dubois, M. Dubar, L. Dubar, and R. Deltombe Effects of Lubricant and Lubrication Parameters on Friction During Hot Steel Forging P. Boisse, Proceed. ESAFORM 2008 Lyon, France 2008 (Symposium No. 18 "Wear and friction in metal forming")
43. T. Davis, R. Zhou, K. Pallav, M. Beltran, J. Cao, K. Ehmann, Q.J. Wang, C. Xia, R. Talwar, and R. Lederich Experimental Friction Study of Micro-scale Laser-textured Surfaces Proceed. Int. Workshop on Microfactories Evanston, IL, USA, October 2008 31 35
44. J.A. Defourny, V.M. Leroy, and P.E. Nilles Update of Developments in Lasertex Technology Iron and Steel Engineer 68 8 1991 39 45
45. R. Deltombe, M. Dubar, A. Dubois, and L. Dubar A New Methodology To Analyse Iron Fines During Steel Cold Rolling Processes Wear 254 2003 211 221
46. K. Dohda, and Z. Wang Investigation into Relationship Between Friction Behavior and Plastic Deformation using a Newly Devised Rolling-type Tribometer Journal of Tribology 117 3 1995 529 533
47. J. Dolves, and R. Hell Electron Beam Texturing of Rolls Iron and Steel Engineer 68 8 1991 33 38
48. L. Dubar, J.P. Bricout, C. Wierre, and P. Meignan New Surface Processes for Cold Forging of Steels Surface and Coatings Technology 102 1998 159 167
49. M. Dubar, L. Dubar, and A. Dubois Wear Analysis of Tools in Cold Forging: PVD versus CVD TiN Coatings Wear 259 2005 1109 1116
50. M. Dubar, S. Huart, R. Deltombe, A. Dubois, and L. Dubar Cold Rolling of Galvanized Strips: A New Approach to the Evaluation of Zinc Fines Formation Journal of Materials Processing Technology 177 2006 505 508
51. F. El-Menshawy, and B. Snaith Advances in Electro-discharge Texturing for Cold Mill Work Rolls Iron and Steel Engineer 68 8 1991 57 59
52. W.C. Emmens The Influence of Surface Roughness on Friction Controlling Sheet Metal Forming Processes, Proceed. of the IDDRG Conf., ASM Metals Park, OH, USA 1988 63 70
53. European Parliament, Council (2006) REACH, EC Regulation No. 1907/2006 of the European Parliament and of the Council.
54. J. Fan, and H. Spikes New Test for Mild Lubricated Wear in Rolling-Sliding Contacts Tribology Transactions 50 2007 145 153
55. G. Finstermann, G. Nopp, N. Eisenköck, and G. Keintzel New Advances in Temper and Skin-Pass Rolling Technology Proceed. of AISE (the Association of Iron and Steel Engineers) Annual Convention Nashville, Tennesee, (CD-ROM) 2002
56. K.L. Friis, P.S. Nielsen, and N. Bay Testing and Modelling of Industrial Tribo-systems for Sheet Metal Forming D.Y. Yang, Y.H. Kim, C.H. Park, Adv. Technol. of Plasticity 2008, Proceed. 9th ICTP Gyeongju, Korea 2008 209 210
57. S. Fukuyama, M. Iwasaki, and K. Nishimura The Effect of Rolling Condition on the Heat-scratch at High Speed Cold Rolling of Steel Proceed. Japanese Spring Conf. for Techn. of Plasticity 1979 383 386 (in Japanese)
58. M. Gariety, G. Ngaile, and T. Altan Evaluation of New Cold Forging Lubricants without Zinc Phosphate Precoat International Journal of Machine Tools and Manufacture 47 2007 673 681
59. M. Geiger Towards Clean Forming Technologies Annals of the CIRP 44 2 1995 581 592
60. M. Geiger, U. Engel, and M. Pfestorp New Developments for the Quantification of Technical Surfaces in Forming Processes Annals of the CIRP 46 1 1997 171 174
61. Geiger, M. Merklein, and J. Hecht Investigations on Formability and Tribology With Regard to Warm Forming of Magnesium Sheets Production Engineering XIII 2 2006 101 104
62. Geiger, M. Merklein, and J. Lechler Determination of Tribological Conditions Within Hot Stamping Production Engineering 2 3 2008 269 276
63. P. Groche, B. Kappes, V. Dünkel, and G. Mauer Signification of Tribology Bench Tests in Cold Bulk Forming, Proceed 2001 WTC Vienna
64. P. Groche, G. Nitzsche, and T. Callies Mechanisms in Abrasive Behavior of Hot-dip Zinc Coatings on Deep Drawing Steel Sheets Production Engineering: Research and Development XII 2 2004 61 64
65. P. Groche, and A. Elsen Werkstatttechnik Online 97 10 2007 817 821
66. P. Groche, and M. Koehler Final Report of AIF-project 14511 2008 (in German)
67. P. Groche, J. Stahlmann, J. Hartel, and M. Köhler Hydrodynamic Effects of Macroscopic Deterministic Surface Structures in Cold Forging Processes Tribology International 42 8 2009 1173 1179
68. P.H. Hansen, and N. Bay Prediction of Wear Distribution in Forming Tools Proceed. 9th Int. Conf. on Experimental Mechanics Copenhagen, Denmark 1 1990 19 30
69. I. Heikkilä Tool Material Aspects in Forming of Stainless Steel Proceed. Int. Conf. on Recent Advances in Manufacturing & Use of Tools & Dies in Stamping of Steel Sheet Olofström, Sweden 2004 139 149
70. T. Hibi Aqueous High Molecular Weight Polymer Lubricant for Hot Forging Technical Review by Forging Technology Institute of Japan 18-53 1993 41 48 (in Japanese)
71. K. Hirai Lubricants for Deformation Processes Journal of JSTP 25 285 1984 878 885 (in Japanese)
72. H. Hoffmeister, F. Schoppe, J. Ostrowski, M. Köhler, and P. Groche Cold Forging without Zinc-Phosphate Layers-Economical and Ecological Potential Proceed. 24. Jahrestreffen der Kaltmassivumformer, VDI 2009 (in German)
73. T. Horita Non-chlorinated Lubricants for Cold Forging Technical Review by Forging Technology Institute of Japan 26 87 2001 59 62 (in Japanese)
74. W.F. Hosford, and J.L. Duncan The Aluminum Beverage Can vol. 271 1994 Scientific American pp. 48-53
75. http://archive.metalformingmagazine.com/2003/10/PunchingAluminium.pdf
76. http://archive.metalformingmagazine.com/2003/08/Wilson.pdf
77. http://irmco.com
78. http://www.cdc.gov/niosh/98-102.html
79. http://www.coldforming.chemetall.com
80. http://www.env.go.jp/en/laws/policy/basic/index.html
81. http://www.env.go.jp/en/laws/recycle/01.pdf
82. http://www.man.dtu.dk/ENLUB: Development of New Environmentally Acceptable Lubricants, Tribological Tests and Models for European Sheet Forming Industry. EU GROWTH project Contract No. GRD1-2001-40717.
83. http://www.pinifer.com
84. Oerlikon Balzers; http://www.oerlikon.com.
85. http://www.rhenuslu.de
86. http://www.salzgitterflachstahl.de/en/Produkte/kaltfein- oberflaechenveredelte-produkte/pretex/
87. http://www.trumpf.de/3.punching-tools-coating-v1.html
88. ICFG Doc. 8/91 (1991) Lubrication Aspects in Cold Forging of Carbon Steels and Low Alloy Steels. The International Cold Forging Group.
89. ICFG Doc. 10/95 (1996) Lubrication Aspects in Cold Forging of Aluminium and Aluminium Alloys. The International Cold Forging Group, 1995. Publ. in WIRE 1:1-12 (supplement of WIRE).
90. H. Ike Report on Metal Forming Tribology Research in Japan with Special Focus on Environmental Aspects N. Bay, Proceed. Int. Conf. on Tribology in Manuf. Process., ICTMP2 Nyborg, Denmark 2004 29 38
91. K. Imazu, and T. Kobayashi Studies of the Stretch Draw Forming Conditions of Laminated Steel T. Altan, Advanced Technology of Plasticity. Proc. 5th ICTP OH, USA 1996 727 730
92. K. Imazu Development of Metal can with Low Environmental Load Journal of JSTP 42 484 2001 416 420 (in Japanese)
93. K. Imazu Dry Forming Method using Polyester Film Laminated Plate as Pre-coating Material Journal of JSTP 46 528 2005 19 23 (in Japanese)
94. M. Ishii, and K. Mishima Two-fluid Model and Hydrodynamic Constitutive Relations Nuclear Engineering and Design 82 1984 107 126
95. J.A. Jaworski, and S.R. Schmid Survivability of Laminated Polymer Lubricant Films in Ironing Tribology Transactions 42 1999 32 38
96. J.A. Jaworski, S.R. Schmid, and J.E. Wang An Experimental Investigation of the Formability and Friction Characteristics of Tin Coated and Polymer Laminated Steels Journal of Manufacturing Science and Engineering 121 1999 232 237
97. Y. Jimbo, T. Hiroshige, and A. Azushima Measurement of Critical Interfacial Temperature by means of the Thermoelectric Method in Cold Sheet Rolling Journal of Iron and Steel Institute of Japan 84 6 1998 423 428 (in Japanese)
98. Y. Jimbo, and A. Azushima Effect of Carbide Properties of Roll Materials on Lubricity in Cold Sheet Rolling of Low-carbon Steel International Journal of Machine Tools and Manufacture 41 2001 347 360
99. Y. Jimbo, and A. Azushima Lubrication Characteristics of Physical Vapor Deposition TiN-coated Roll for High Productivity in Cold Rolling of Low-carbon Steel Sheet Wear 249 2001 415 421
100. Kaftanoglu B (2009) Middle East Technical University, Ankara, personal communication with N. Bay.
101. N. Kashimura, M. Takeuchi, F. Oda, F. Kawahara, H. Ojima, and M. Tomono Development of Environmentally Friendly Lubricant for Cold Forging with High Performance and Simple Treatment Journal of the JSTP 41 469 2000 109 114 (in Japanese)
102. S. Kataoka, M. Murakawa, T. Aizawa, and H. Ike Tribology of Deep-drawing of Various Metal Sheets with use of Ceramic Tools Surface and Coating Technology 177-178 2004 582 590
103. S. Kataoka, A. Motoi, K. Tamaoki, M. Murakawa, H. Noguchi, and J. Kihara Improvement in DLC Thin Film Adhesion and Its Application to Deep-drawing Journal of the JSTP 46 532 2005 412 416 (in Japanese)
104. Kataoka S (2009) Shonan Inst. Techn., Fujisawa, personal communication with N. Bay.
105. T. Kawabe Lubricants for Hot Forging Technical Review by Forging Technology Institute of Japan 18 53 1993 13 15 (in Japanese)
106. H. Kijima, and N. Bay Skin-pass Rolling. I. Studies on Roughness Transfer and Elongation Under Pure Normal Loading International Journal of Machine Tools and Manufacture 48 2008 1313 1317
107. H. Kijima, and N. Bay Skin-pass Rolling. II. Studies of Roughness Transfer Under Combined Normal and Tangential Loading International Journal of Machine Tools and Manufacture 48 2008 1308 1312
108. H. Kim, J.H. Sung, R. Sivakumar, and T. Altan Evaluation of Stamping Lubricants Using the Deep Drawing Test Journal of Machine Tools and Manufacture 47 14 2007 2120 2132
109. H. Kim, S. Han, Q. Yan, and T. Altan Evaluation of Tool Materials, Coatings and Lubricants in Forming Galvanized Advanced High Strength Steels (AHSS) Annals of the CIRP, Manufacturing Technology 57 2008 299 304
110. H. Kim, J. Sung, F.E. Goodwin, and T. Altan Investigation of Galling in Forming Galvanized Advanced High Strength Steels (AHSS) using the Twist Compression Test (TCT) Journal of the Materials Processing and Technology 205 2008 459 468
111. H. Kim, T. Altan, and Q. Yan Evaluation of Stamping Lubricants in Forming Advanced High Strength Steels (AHSS) Using Deep Drawing and Ironing Tests Journal of the Materials Processing Technology 209 2009 4122 4133
112. Y. Kimura, and K. Okada Film Thickness at Elastohydrodynamic Conjunctions Lubricated with Oil-in-Water Emulsions Proceedings of the IMechE C176 1987 85 90
113. Y. Kimura, and K. Okada Lubricating Properties of Oil-in-Water Emulsions Tribology Transactions 32 1989 523 532
114. F. Klocke, M. Massmann, and K. Gerschwiler Combination of PVD Tool Coatings and Biodegradable Lubricants in Metal Forming and Machining Wear 259 2005 1197 1206
115. F. Klocke, M. Massmann, K. Bobzin, E. Lugscheider, and N. Bagcivan Carbon Based Tool Coatings as an Approach for Environmentally Friendly Metal Forming Processes Wear 260 3 2006 287 295
116. F. Klocke, and C. Kuwer Wear Reduction in the Sheet-metal Forming of AISI 304 A. Azushima, Proceed. Int. Conf. on Tribology in Manuf. Process. Yokohama, Japan 2007 207 212
117. F. Klocke, T. Massmann, C. Zeppenfeld, R.-A. Schmidt, J. Schulz, and F. Mumme Fineblanking with Non-chlorinated Lubricants Tribologie und Schmierungstechnik 55 4 2008 33 38
118. Kobatashi N, Moriyama A, Yoshida M (2005) Electrolytical Phosphating Process for Stel Wire Drawing. Nihon Parkerizing, Technical report No. 17.
119. S. Komatsuzaki, T. Uematsu, and T. Narahara Effects of Extreme Pressure Additives in Forward Extrusion Journal of the JSTP 29-330 1998 748 754 (in Japanese)
120. S. Komatsuzaki Extreme Pressure Additives for Cold Forging Lubricant Journal of the Japan Society of Lubrication Engineers 31 6 1986 381 386 (in Japanese)
121. L. Lazzarotto, L. Dubar, A. Dubois, P. Ravassard, and J. Oudin Three Selection Criteria for the Cold Metal Forming Lubricating Oils Containing Extreme Pressure Agents Journal of Material Processing Technology 80-81 1998 245 250
122. J. Lechler, and M. Merklein Investigations on Forming Limits Within Hot Stamping Proceed. 1st Int. Conf. Hot Sheet Metal Forming of High-Performance Steel 2008 55 62
123. F. Lockwood, K. Bridger, and M. Tudros Interactions Between Rolling Oil Emulsions and Aluminum Alloy Surfaces ASLE Transactions 27 1984 203 206
124. K. Louaisil, M. Dubar, R. Deltombe, A. Dubois, and L. Dubar Analysis of Interface Temperature, Forward Slip and Lubricant Influence on Friction and Wear in Cold Rolling Wear 266 1-2 2009 119 128
125. E. Lugscheider, K. Bobzin, C. Colmenares, F. Klocke, and T. Massmann Development and Optimization of a Superlattice TiHfCrN Coating for Cold Metal Forming Applications Surface and Coating Technology 177-178 2004 612 622
126. S. Mahanti, A.K. Bhatta, R.N. Biswas, J. Bhatia, and S.N. Singh Development of a Meta-stable Semi-synthetic Lubricant for Cold Rolling of Steel Journal of Synthetic Lubrication 6 1990 285 298
127. F. Maratray, and R. Usseglio-Nanot Factors Affecting the Structure of Chromium and Chromium-Molybdenum White Irons Climax Molybdenum, S. A. 1975 10
128. R. Matsumoto, and K. Osakada Lubrication and Friction of Magnesium Alloys in Warm Forging Annals of the CIRP 51 1 2002 223 226
129. R. Matsumoto, H. Kawashima, and K. Osakada Journal of Solid Mechanics and Materials Engineering 1 4 2007 397 405
130. Y. Meguro Non-graphite Lubricants for Hot Forging Technical Review by Forging Technology Institute of Japan 18 53 1993 16 22 (in Japanese)
131. M. Meiler, M. Pfestorf, M. Geiger, and M. Merklein The Use of Dry Film Lubricants in Aluminium Sheet Metal Forming Wear of Materials 255 2003 1455 1462
132. M. Meiler, M. Pfestorf, M. Merklein, and M. Geiger Tribological Properties of Dry Film Lubricants in Aluminium Sheet Metal Forming N. Bay, Proceed. 2nd Int. Conf. on Tribology in Manuf. Process., ICTMP2 Nyborg, Denmark 2004 489 500
133. M. Meiler, and H. Jaschke Lubrication of Aluminium Sheet Metal Within Automotive Industry Advanced Materials Research 6-8 2005 551 558
134. T. Mizuno, and M. Okamoto Effects of Lubricant Viscosity at Pressure and Sliding Velocity on Lubricating Conditions in the Compression-Friction Test on Sheet Metals Transactions of the ASME Journal of the Lubrication Technology 104 1982 53 59
135. P. Montmitonnet, A. Stephany, S. Cassarini, J.P. Ponthot, M. Laugier, and N. Legrand Modelling of Metal Forming Lubrication by o/w Emulsions A. Azushima, Proceed. Int. Conf. Trib. Manuf. Process. Yokohama 2007 85 90
136. K. Mori, T. Murao, and Y. Harada Multi-stage Cold Deep Drawing of Long, Pure Titanium Cups using Coloured Sheets for Prevention of Seizure Annals of the CIRP 52 1 2003 237 240
137. K. Morishita Trends of Environmentally Friendly Lubricants for Cold Forging Technical Review by Forging Technology Institute of Japan 26 87 2001 12 18 (in Japanese)
138. M. Morishita Tribology in Manufacturing Processes of Automobiles at Toyota A. Azushima, Proceed. 3rd Int. Conf. on Tribology in Manufacturing Processes, ICTMP3 Yokohama, Japan 2007 1 9
139. Moroi T, Koide Y, Katoh M (2002) Report of Aichi Steel Co., 20-1:23-25 (in Japanese).
140. R. Mould, H.B. Silver, and R. Syrett Investigations of the Activity of Cutting Oil Additives. III. Oils Containing Both Organochlorine and Organosulphur Compounds Wear 26 1973 27 37
141. M. Murakawa, N. Koga, and T. Kumagai Deep-drawing of Aluminium Sheets Without Lubricant by Use of Diamond-Like Carbon coated Dies Surface and Coating Technology 76-77 2 1995 553 558
142. M. Murakawa, N. Koga, S. Watanabe, and S. Takeuchi Tribological Behavior of Amorphous Hard Carbon Films Against Zinc-plated Steel Sheets Surface and Coating Technology 108-109 1998 425 430
143. M. Murakawa, and S. Takeuchi Evaluation of Tribological Properties of DLC Films used in Sheet Metal Forming of Aluminium Sheet Surface and Coating Technology 163-164 2003 561 565
144. T. Nakahara, T. Makino, and K. Kyogoku Observations of Liquid Droplet Behavior and Oil Film Formation in o/w Type Emulsion Lubrication Journal of Tribology 110 1988 348 353
145. T. Nakahara, S. Shiokawa, and K. Kyoguku Phase Inversion Region in o/w Emulsion Lubrication Japanese Journal of Tribology 35 1990 1435 1436
146. T. Nakamura Counter Measures for Seizure Phenomena in Deformation Processes Journal of the JSTP 34 393 1993 1082 1090 (in Japanese)
147. T. Nakamura, and I. Ishibashi Environmentally Friendly Lubrication System for Forging English translation of Report from JSTP's Sub-Committee on Process-Tribology 2004
148. T. Nakamura, Y. Sumioka, Y. Sagisaka, I. Ishibashi, and M. Sekizawa Lubrication Performance of Environmentally Friendly Lubricants for Forging, 1st Report Proceed. 59th Japanese Joint Conference for the Technology of Plasticity 2008 579 580
149. T. Nakamura, Y. Sumioka, K. Sakoda, S. Miyano, Y. Ishiizumi, I. Ishibashi, and M. Sekizawa Lubrication Performance of Environmentally Friendly Lubricants for Forging, 2nd Report Proceed. of the 59th Japanese Joint Conference for the Technology of Plasticity 2008 333 334
150. T. Nakamura, S. Tanaka, K. Hayakawa, and T. Tsunekawa Tribo-characteristics of Titanium Sheet in Iterative Processes of Sheet Metal Forming D.Y. Yang, Y.H. Kim, C.H. Park, Advanced Technology of Plasticity, Proceed. 9th ICTP 2008 2077 2082
151. G. Ngaile, M. Gariety, and T. Altan Enhancing Tribological Conditions in Tube Hydroforming by us-ing Textured Tubes Journal of Tribology 128 2006 674 676
152. G. Ngaile, J. Cochran, and D. Stark Formulation of Polymer-based Lubricant for Metal Forming Proc. IMechE, Part B, Journal of Engineering Manufacture 221 2007 559 568
153. M.S. Nilsson, D.D. Olsson, I. Petrushina, J.L. Andreasen, N. Bay, E. Christensen, and N.J. Bjerrum International Journal of Surface Science and Engineering 4 1 2010 68 79
154. K.D. Nittel Neue Beschichtungen und Trends beim Kaltfliesspressen und Kaltstauchen Proceed. 23th Jahrestreffung der Kaltmassivumformer Düsseldorf, VDI 2008 (in German)
155. T. Ohmori, N. Kitamura, A. Danno, and M. Kawamura A Cold Forging Oil Containing Phosphorus Type EP Additives Tribology Transactions 34-3 1991 458 464
156. T. Ohmori, N. Kitamura, A. Danno, and M. Kawamura Lubricity of Lubricants Added Phosphate Extreme Pressure Additives for Cold Forging Tribologist 36 6 1991 452 458 (in Japanese)
157. P.T. Olesen, T. Steenberg, E. Christensen, and N.J. Bjerrum Electrolytic Depositions of Amorphous and Crystalline Zn/Ca-Phosphates on Stainless Steel Journal of the Materials Science 33 1998 3059 3063
158. D.D. Olsson, N. Bay, and J.L. Andreasen Analysis of Pick-up Development in Punching Annals of the CIRP 51 1 2002 185 190
159. D.D. Olsson, N. Bay, and J.L. Andreasen Lubricant Test for Punching and Blanking M. Kiuchi, Advanced Technology of Plasticity. Proc. 7th ICTP Yokohama, Japan 2002 757 762 (Shorter version publ. in JSTP Journal, Special Issue, 2003-04, 44/507:356-358)
160. D.D. Olsson, N. Bay, and J.L. Andreasen Direct Friction Measurement in Draw Bead Testing P. Bariani, Advanced Technology of Plasticity. Proceed. 8th ICTP Verona 2005 633 634
161. D.D. Olsson, N. Bay, and J.L. Andreasen A Quantitative Lubricant Test for Deep Drawing International Journal of Surface Science and Engineering 4 1 2010 2 12
162. K. Osakada, and R. Matsumoto Fundamental Study of Dry Metal Forming with Coated Tools Annals of the CIRP 49 1 2000 161164
163. A. Otto, S. Weidel, U. Engel, and M. Geiger Laser in Metal Forming-Benefits for Tribology F.-W. Bach, K.-D. Bouzakis, B. Denkena, M. Geiger, Proceed. 6th Int. Conf. THE Coatings Hannover, Germany 2007 13 22
164. A. Petek, B. Podgornik, K. Kuzman, M. Cekada, W. Waldhauser, J. Vizintin, and J. Stefan The Analysis of Complex Tribological System of Single Point Incremental Sheet Metal Forming-SPIF Strojniski vestnik-Journal of the Mechanical Engineering 54 4 2008 266 273
165. M. Pfestorf, and M. Müller Application of Aluminium in Automotive Structure and Hang On Parts Proceed. Materials Week, Int. Congr. on Advanced Materials, their Processes and Applications Munich, Germany 2001
166. M. Pfestorf, M. Meiler, M. Merklein, and M. Geiger New Tribological Aspects of Dry Film Lubricated Aluminium Sheet Metal M. Geiger, K.-D. Bouzakis, B. Denkena, H.-K. Toenshoff, F.-W. Bach, U. Popp, Proceed. 4th Int. Conf. THE Coatings in Manufacturing Engineering Bamberg, Meisenbach 2004 497 506
167. B. Podgornik, S. Hogmark, and J. Pezdirnik Comparison Between Different Test Methods for Evaluation of Galling Properties of Surface Engineered Tool Surfaces Wear 257 2004 843 851
168. B. Podgornik, S. Hogmark, and O. Sandberg Influence of Surface Roughness and Coating Type on the Galling Properties of Coated Forming Tool Steel Surface and Coating Technology 184 2004 338 348 (Pubitemid 38728539)
169. U. Popp, and U. Engel Microtexturing of Cold-forging Tools-Influence on Tool Life Proceed. IMechE Part B: Journal of the Engineering Manufacture 220 2006 27 33
170. K.P. Rao, and C.L. Xie A comparative study on the performance of boric acid with several conventional lubricants in metal forming Tribology International 39 2006 663 668
171. J.F. Renaudin, G. Batit, Y. Thore, and E. Felder A Way to Build a Computer Program for Forecasting the Abrasive Wear of Hot Forging Dies 11th Int. Drop Forging Conf. Köln 1983
172. Y. Sakaguchi, and W.R.D. Wilson EHD Analysis of the Behavior of Emulsions at the Inlet of Roll Bites Proceed. 5th Conf. Plastic Working, Japan Society for Technology of Plasticity Tokyo 1984
173. O. Sandberg, P.-. Bustad, B. Carlsson, M. Fällström, and T. Johansson Characterisation of Tool Wear in Stamping of EHS and UHS Steel Sheets Proceed. Int. Conf. on Recent Advances in Manufacturing & Use of Tools a& Dies in Stamping of Steel Sheet Olofström, Sweden 2004 151 169
174. O. Sandberg Advanced Low-friction Tool Steel for Metal Processing: Properties and Industrial Experiences International Journal of Microstructure and Materials Properties 3 2-3 2008 391 400
175. O. Sandberg, B. Högman, B. Johansson, and A. Thuvander New Tool Concept for Stamping of HSS and AHSS Sheet Proceed. Int. Conf. on Deep Drawing, IDDRG Olofström, Sweden 2008 591 602
176. T. Sato, and T. Besshi Anti-galling Evaluation in Aluminium Sheet Forming Journal of the Materials Processing and Technology 83 1998 185 191
177. T. Sato, T. Besshi, T. Tsutsui, and T. Morimoto Anti-galling Property of a Diamond-like Carbon Coated Tool in Aluminium Sheet Forming Journal of the Materials Processing and Technology 104 2000 21 24
178. J.A. Schey Tribology in Metalworking. Friction, Lubrication and Wear 1983 ASM Metals Park, OH, USA
179. S.R. Schmid, and W.R.D. Wilson Lubrication of Aluminum Rolling by Oil-in-Water Emulsions Tribology Transactions 38 1995 452 458
180. S.R. Schmid, and W.R.D. Wilson Lubrication Mechanisms for Oil-in-Water Emulsions Lubrication Engineering 52 1996 168 175
181. S.R. Schmid, H. Yang, R. Reich, and T. Kasun Developments in Emulsion Lubrication N. Bay, Proceed. 2nd Int. Conf. on Tribology in Manuf. Process., ICTMP2 Nyborg, Denmark 2004 509 519
182. D. Schmoeckel, M. Prier, and J. Staeves Topography Deformation of Sheet Metal During the Forming Process and Its Influence on Friction Annals of the CIRP 43 1 1997 175 178
183. D. Schmoeckel, and M. Rupp More Environment Friendly Cold Massive Forming-Production of Steel without Zinc Phosphate Layer Proceed. Neuere Entwicklundeg der Massivumformung Stuttgart 1997 183 200 (in German)
184. N. Schuleit, D. Fletcher, A. Kapoor, and K. Steinhoff New Laser Surface Treatment for Improving Mechanical and Tribological Properties of Forming Tools Proceed. 1st Europäischer Kongress für Wärmebehandlung und mechanishe Oberflächenbehandlung "ATTT2000" Metz, France 2000 29 36
185. M. Sellés-Cantó, S.R. Schmid, and V.J. Segui Ironability of a Three-layered Polymer Coated Steel. Part 1. Experimental Investigation Journal of the Materials Processing Technology 202 2008 7 14
186. S. Shida Environmentally Friendly Lubricants for Cold Forging Proceed. 215th Symp. of JSTP, 215 2002 33 39 (in Japanese)
187. Shimizu A (2008) Lubrication Technology for Cold Forming in the 21st Century. Nihon Parkerizing Technical Report No. 20.
188. C.G. Soerensen, J.L. Andreasen, J. Bech, N. Bay, U. Engel, and T. Neudecker A Basic Study of the Influence of Surface Topography on Mechanisms of Liquid Lubrication in Metal Forming Annals of the CIRP 48 1 1999 203 208
189. Staeves J (1998) Beurteilung der Topografie von Blechen in Hinblick auf die Reibung bei der Umformung, Darmstadt, Technische Universität, PtU, Ph.D. Thesis, Shaker Verlag (in German).
190. K. Steinhoff Self-organizing Tool Surfaces for Metal-working Processes N. Bay, Proceed. 2nd Int. Conf. on Tribology in Manufacturing Processes Nyborg, Denmark 2004 605 612
191. K. Steinhoff Neues zur Strukturierung von Feinblechoberflächen K. Steinhoff, R. Kopp, Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik Bad Harzburg (D): Grips Media GmbH 2008 239 260 (in German)
192. K. Takaishi, T. Iwaki, T. Kondo, K. Sasaki, and Y. Abe Extension of Blanking Die Life by Surface Coatings A. Azushima, Advanced Technology of Plasticity, Proceed. of the 7th ICTP Yokohama, Japan, 2 2002 1657 1662
193. M. Takeuchi, F. Ikesue, and N. Kashimura Development of Environmentally Friendly Lubricant with High Performance and Simple Treatment for Cold Forging M. Geiger, Advanced Technology of Plasticity. Proc. 6th ICTP Nürnberg 1999 383 389
194. K. Tamaoki, S. Kataoka, and K. Minamoto Dry Deep-drawing with Use of Electroconductive Ceramic Tools N. Bay, Proceed. Int. Conf. on Tribology in Manuf. Process Nyborg, Denmark 2007 175 179
195. K. Tamaoki, S. Kataoka, K. Kanda, S. Tanako, and T. Teranish Study of Deep Drawing Using Diamond Coated Tools Journal of Material Testing Research Association of Japan 53 4 2008 247 253 (in Japanese)
196. Tang PT, Arentoft M, Bay N, Borrild M, Mizushima I, Jensen JD, Paldan NA (2008) A Microporous Layer for Lowering Friction in Metal Forming Processes, Patent PCT/DK2008/000233.
197. M. Tolazzi, M. Meiler, and M. Merklein Tribological Investigations on Coated Steel Sheets using the Dry Film Lubricant Drylube E1 Advanced Materials Research 6-8 2005 565 572
198. G.E. Totten, L.D. Wedeven, M. Anderson, and J.R. Dickey Bench Testing of Industrial Fluid Lubrication and Wear Properties Used in Machinery Applications American Society for Testing and Materials 2001 STP1404
199. S. Tsuda, S. Yoshihara, and S. Kataoka Formability of AZ31 Magnesium Alloy Sheet in Dry Press Forming Using Diamond-coated Dies Proceed. ASME IMECE2009 Lake Buena Vista, FL, USA 2009 1 6
200. A. Uno, S. Shida, M. Tomono, T. Shimizu, and T. Sano Development of Waste Free Water-system Lubricant for Cold Forging M. Kiuchi, Advanced Technology of Plasticity. Proc. 7th ICTP Yokohama 2002 1669 1673
201. H. Utsunomiya, S. Kawajiri, N. Takahira, J. Miyamoto, T. Sakai, and T. Tanaka Porosification of Steel Surface-New Lubrication System for Cold Forging A. Azushima, Proceed. 3rd Int. Conf. on Tribology in Manuf. Process., ICTMP3 Yokohama 2007 63 72
202. van der Schaft JC (1993) Eindrapport Droogstampen en Milieuvriendelijke Smeermiddelen, Philips report PHR-58-93-02-006 (in Dutch).
203. M. Vermeulen, and J. Scheers Micro-hydrodynamic Effects in EBT Textured Steel Sheet International Journal of Machine Tools and Manufacture 41 13 2001 1941 1951
204. M.G. Vucich, and M.X. Vitellis Emulsion Control and Oil Recovery on the Lubricating System of Double-reduction Mills Iron and Steel Engineering 1976 29 38
205. S. Wagner, H. Kleinert, and R. Zimmermann Trockenschmierstoffe für die Blechumformung Proceed. Int. Conf. Neuere Entwicklungen in der Blechumformung Stuttgart, Germany 2002 459 480 (in German)
206. K. Wagner, R. Völk, and U. Engel Journal of the Materials Processing and Technology 201 2008 2 8
207. Z. Wang, K. Dohda, and Y.-H. Jeong Lubricity of Volatile Lubricants in Sheet Metal Rolling Journal of Materials Processing Technology 140 1-3 2003 548 554
208. Wibom O (1998) Tribology in Cold Forging of Stainless Steel, Ph.D. Thesis, Technical Univ. of Denmark (in Danish).
209. W.R.D. Wilson, and J.A. Walowit An Isothermal Lubrication Theory for Strip Rolling with Front and Back Tension Proceed. of Trib. Conv. 1971, Proc IMechE 1972 164 172
210. W.R.D. Wilson, Y. Sakaguchi, and S.R. Schmid A Mixed Flow Model for Lubrication with Emulsions Tribology Transactions 37 1994 543 551
211. W.R.D. Wilson Low-Speed Mixed Lubrication of Metal-Forming Processes Annals of the CIRP 44 1 1995 205 208
212. N. Yamamoto Tribology in Forging Tribologist 47-6 2002 451 456 (in Japanese)
213. A. Yanagida, and A. Azushima Evaluation of Coefficients of Friction in Hot Stamping by Hot Flat Drawing Test Annals of the CIRP 58 1 2009 247 250
214. H. Yang, S.R. Schmid, R. Reich, and T. Kasun Direct Observations of Emulsion Flow in EHL Contact Journal of Tribology 128 2006 619 623
215. H. Yokota, K. Endo, and J. Shibata Metal Working Fluids Journal of the Japanese Society of Tribologists 39 1994 892
216. T. Yokoyama Recent New Lubricants for Forging Technical Review by Forging Technology Institute of Japan 26 87 2001 48 52 (in Japanese)
217. M. Yoshida Characteristics and Application of Recent Lubricants for Cold Forging Technical Review by Forging Technology Institute of Japan 26 87 2001 53 58 (in Japanese)
218. Yoshida M, Imai Y, Yamaguchi H, Nagata S (2003) Nihon Parkerizing, Technical Report No. 15.
219. B. Zajec, B. Podgornik, N. Bay, and J. Vizintin Influence of Hard Coatings on Process of Stamping A. Azushima, Proceed. 3rd Int. Conf. on Tribology in Manufacturing Processes, ICTMP3 Yokohama, Japan 2007 181 184
220. W. Zimnik, B. Ritterbach, and K. Müll Pretex, Ein neues Verfahren zur Erzeugung texturierter Feinbleche für höchste Ansprüche Stahl und Eisen 118 3 1998 75 80
221. Zwez P, Holz J (2009) ZWEZ-Chemie, personal communication with N. Bay.