Verification of predicted knee replacement kinematics during simulated gait in the Kansas knee simulator

Journal of Biomechanical Engineering

Volumn 132, Issue 8, 2010, Pages

  Halloran, Jason P ^a   Clary, Chadd W ^b   Maletsky, Lorin P ^b   Taylor, Mark ^c   Petrella, Anthony J ^d   Rullkoetter, Paul J ^a  

^a University of Denver   (United States)

^b University of Kansas   (United States)

^c UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

^d JOHNSON AND JOHNSON   (United States)

Author keywords

Contact mechanics; Finite element model; Kinematics; Knee mechanics; TKR

Indexed keywords

ANTERIOR POSTERIORS; COEFFICIENT OF FRICTIONS; COMPUTATIONAL MODEL; CONTACT MECHANICS; CONTACT PRESSURE DISTRIBUTION; DYNAMIC FINITE ELEMENT MODEL; EVALUATION PROCESS; EXPERIMENTAL MEASUREMENTS; EXPLICIT FINITE ELEMENTS; FINITE ELEMENT MODELS; FLEXION-EXTENSION; IMPLANT DESIGN; INTERFACE FRICTION; KNEE MECHANICS; KNEE REPLACEMENT; KNEE SIMULATORS; LOADING CONDITION; MODEL SENSITIVITY; PATELLOFEMORAL; PATELLOFEMORAL JOINT; PHYSICAL TESTING; RIGID BODY; RMS ERRORS; ROOT MEAN SQUARE; TOTAL KNEE REPLACEMENT;

ARTIFICIAL LIMBS; FINITE ELEMENT METHOD; FRICTION; IMPLANTS (SURGICAL); KINEMATICS; PRESSURE DISTRIBUTION; SIMULATORS;

JOINT PROSTHESES;

ARTICLE; COMPARATIVE STUDY; DATA ANALYSIS; DYNAMICS; FORCE; FRICTION; GAIT; KINEMATICS; KNEE ARTHROPLASTY; MACHINE; PATELLOFEMORAL JOINT; PHYSICAL PARAMETERS; PREDICTION; RIGIDITY; SIMULATION; SIMULATOR; TIBIA; VALIDATION STUDY; WEIGHT BEARING; EQUIPMENT; EVALUATION; HUMAN; INSTRUMENTATION; JOINT CHARACTERISTICS AND FUNCTIONS; KNEE; KNEE PROSTHESIS; MECHANICAL STRESS; PATHOPHYSIOLOGY; TREATMENT OUTCOME;

BIOMIMETIC MATERIAL;

BIOMIMETIC MATERIALS; EQUIPMENT FAILURE ANALYSIS; HUMANS; KNEE JOINT; KNEE PROSTHESIS; RANGE OF MOTION, ARTICULAR; STRESS, MECHANICAL; TREATMENT OUTCOME;

EID: 77955381701     PISSN: 01480731     EISSN: 15288951     Source Type: Journal    
DOI: 10.1115/1.4001678     Document Type: Article

References (26)

1. DesJardins, J. D., Walker, P. S., Haider, H., and Perry, J., 2000, "The Use of a Force-Controlled Dynamic Knee Simulator to Quantify the Mechanical Performance of Total Knee Replacement Designs During Functional Activity," J. Biomech., 33, pp. 1231-1242. (Pubitemid 30427318)
2. Walker, P. S., Blunn, G. W., Broome, D. R., Perry, J., Watkin, S. A., Sathasivam, S., Dewar, M. E., and Paul, J. P., 1997, "A Knee Simulating Machine for Performance Evaluation of Total Knee Replacements," J. Biomech., 30, pp. 83-89.
3. Zavatsky, A. B., 1997, "A Kinematic-Freedom Analysis of a Flexed-Knee-Stance Testing Rig," J. Biomech., 30, pp. 277-280.
4. Zachman, N. J., Hillberry, B. M., and Kettlekamp, D. B., 1978, "Design of a Load Simulator for the Dynamic Evaluation of Prosthetic Knee Joints," ASME Paper No. 78-DET-59, pp. 1-11.
5. Chao, E. Y. S., MacWilliams, B. A., Chan, B., and Meija, L., 1994, "Evaluation of a Dynamic Joint Simulator," ASME Bioeng. Div. Publ. Bed., Vol. 28, pp. 281-282.
6. Maletsky, L. P., and Hillberry, B. M., 2005, "Simulating Dynamic Activities Using a Five-Axis Knee Simulator," ASME J. Biomech. Eng., 127, pp. 123-133.
7. Sathasivam, S., and Walker, P. S., 1997, "A Computer Model With Surface Friction for the Prediction of Total Knee Kinematics," J. Biomech., 30, pp. 177-184. (Pubitemid 27029796)
8. Sathasivam, S., and Walker, P. S., 1998, "A Computer Model to Predict Subsurface Damage in Tibial Inserts of Total Knees," J. Orthop. Res., 16, pp. 564-571.
9. Rawlinson, J. J., and Bartel, D. L., 2002, "Flat Medial-Lateral Conformity in Total Knee Replacements Does Not Minimize Contact Stresses," J. Biomech., 35, pp. 27-34.
10. Giddings, V. L., Kurtz, S. M., and Edidin, A. A., 2001, "Total Knee Replacement Polyethylene Stresses During Loading in a Knee Simulator," ASME J. Tribol., 123, pp. 842-847.
11. Piazza, S. J., and Delp, S. L., 2001, "Three-Dimensional Dynamic Simulation of Total Knee Replacement Motion During a Step-Up Task," ASME J. Biomech. Eng., 123, pp. 599-606.
12. Godest, A. C., Beaugonin, M., Haug, E., Taylor, M., and Gregson, P. J., 2002, "Simulation of a Knee Joint Replacement During Gait Cycle Using Explicit Finite Element Analysis," J. Biomech., 35, pp. 267-275.
13. Halloran, J. P., Petrella, A. J., and Rullkoetter, P. J., 2005a, "Explicit Finite Element Modeling of Total Knee Replacement Mechanics," J. Biomech., 38, pp. 323-331.
14. Miller, M. C., Zhang, A. X., Petrella, A. J., Berger, R. A., and Rubash, H. E., 2001, "The Effect of Component Placement on Knee Kinetics After Arthroplasty With an Unconstrained Prosthesis," J. Orthop. Res., 19, pp. 614-620.
15. Rhoads, D. D., Noble, P. C., Reuben, J. D., Mahoney, O., and Tullow, H. S., 1990, "The Effect of Femoral Component Position on Patellar Tracking After Total Knee Arthroplasty," Clin. Orthop. Relat. Res., 260, pp. 43-51. (Pubitemid 20381515)
16. Singerman, R., White, C., and Davy, D. T., 1995, "Reduction of Patellofemoral Contact Forces Following Anterior Displacement of the Tibial Tubercle," J. Orthop. Res., 13, pp. 279-285.
17. Singerman, R., Pagan, H. D., Peyser, A. B., and Goldberg, V. M., 1997, "Effect of Femoral Component Rotation and Patellar Design on Patellar Forces," Clin. Orthop. Relat. Res., 334, pp. 345-353.
18. Yoshii, I., Whiteside, L. A., and Anouchi, Y. S., 1992, "The Effect of Patellar Button Placement and Femoral Component Design on Patellar Tracking in Total Knee Arthroplasty," Clin. Orthop. Relat. Res., 275, pp. 211-219.
19. Anouchi, Y. S., Whiteside, L. A., Kaiser, A. D., and Milliano, M. T., 1993, "The Effects of Axial Rotational Alignment of the Femoral Component on Knee Stability and Patellar Tracking in Total Knee Arthroplasty Demonstrated on Autopsy Specimens," Clin. Orthop. Relat. Res., 287, pp. 170-177.
20. Guess, T. M., and Maletsky, L. P., 2005, "Computational Modeling of a Dynamic Knee Simulator for Reproduction of Knee Loading," ASME J. Biomech. Eng., 127, pp. 1216-1221.
21. Grood, E. S., and Suntay, W. J., 1983, "A Joint Coordinate System for the Clinical Description of Three-Dimensional Motions: Application to the Knee," ASME J. Biomech. Eng., 105, pp. 136-144.
22. Halloran, J. P., Easley, S. K., Petrella, A. J., and Rullkoetter, P. J., 2005b, "Comparison of Deformable and Elastic Foundation Finite Element Simulations for Predicting Knee Replacement Mechanics," ASME J. Biomech. Eng., 127, pp. 813-818.
23. DeHeer, D. C., and Hillberry, B. M., 1992, "The Effect of Thickness and Nonlinear Material Behavior on Contact Stresses in Polyethylene Tibial Components," Trans. Annu. Meet. - Orthop. Res. Soc., 17, p. 793.
24. Lafortune, M. A., 1984, "The Use of Intra-Cortical Pins to Measure the Motion of the Knee Joint During Walking," Ph.D. thesis, Penn State University, University Park, PA.
25. Maletsky, L. P., Sun, J., and Morton, N. A., 2007, "Accuracy of an Optical Active-Marker System to Track the Relative Motion of Rigid Bodies," J. Biomech., 40, pp. 682-685.
26. Morton, M. A., Maletsky, L. P., Pal, S., and Laz, P. J., 2007, "Effect of Variability in Anatomical Landmark Location on Knee Kinematic Description," J. Orthop. Res., 25, pp. 1221-1230.