Review of hydraulic roughness scales in the fully rough regime

Journal of Fluids Engineering, Transactions of the ASME

Volumn 132, Issue 4, 2010, Pages 0412031-04120310

  Flack, Karen A ^a   Schultz, Michael P ^a  

^a UNITED STATES NAVAL ACADEMY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ENGINEERING FLOWS; FRICTIONAL DRAG; HYDRAULIC ROUGHNESS; NEW CORRELATIONS; PREDICTIVE METHODS; ROOT MEAN SQUARE ROUGHNESS; ROUGH SURFACES; ROUGHNESS HEIGHT; ROUGHNESS SCALE; SHAPE PARAMETERS; SURFACE ROUGHNESS PROFILES;

CLUSTER ANALYSIS; DRAG; FRICTION; PHOTORESISTS; REGRESSION ANALYSIS; SURFACE ROUGHNESS;

PROBABILITY DENSITY FUNCTION;

EID: 77955294943     PISSN: 00982202     EISSN: 1528901X     Source Type: Journal    
DOI: 10.1115/1.4001492     Document Type: Review

References (60)

1. Nikuradse, J., 1933, "Laws of Flow in Rough Pipes," NACA Technical Memorandum 1292.
2. Colebrook, C. F., 1939, "Turbulent Flow in Pipes, With Particular Reference to the Transitional Region Between Smooth and Rough Wall Laws," J. Inst Civ. Eng., 11, pp. 133-156.
3. Flores, O., and Jiménez, J., 2006, "Effect of Wall-Boundary Disturbances on Turbulent Channel Flows," J. Fluid Mech., 566, pp. 357-376.
4. Lee, S. H., and Sung, H. J., 2007, "Direct Numerical Simulation of the Turbulent Boundary Layer Over a Rod-Roughened Wall," J. Fluid Mech., 584, pp. 125-146.
5. Orlandi, P., and Leonardi, S., 2008, "Direct Numerical Simulation of Three- Dimensional Turbulent Rough Channels: Parameterization and Flow Physics," J. Fluid Mech., 606, pp. 399-415.
6. Moody, L. F., 1944, "Friction Factors for Pipe Flow," Trans. ASME, 66, pp. 671-684.
7. Allen, J. J., Shockling, M. A., and Smits, A. J., 2005, "Evaluation of a Universal Transitional Resistance Diagram for Pipes With Honed Surfaces," Phys. Fluids, 17, p. 121702.
8. Langelandsvik, L. I., Kunkel, G. J., and Smits, A. J., 2008, "Flow in a Commercial Steel Pipe," J. Fluid Mech., 595, pp. 323-339.
9. 1988, Principles of Naval Architecture, Vol.II, E. V. Lewis, ed., Society of Naval Architects and Marine Engineers, Jersey City, NJ.
10. International Towing Tank Conference (ITTC), 1978, "Report of the Powering Performance Committee," 15th ITTC, Hague.
11. Bowden, B. S., and Davison, N. J., 1974, "Resistance Increments Due to Hull Roughness Associated With Form Factor Extrapolation Methods," National Physical Laboratory (NP) Ship Technical Manual 3800.
12. International Towing Tank Conference (ITTC), 2005, "Report of the Powering Performance Committee," 24th ITTC, Edinburgh, Scotland, UK.
13. Townsin, R. L., Byrne, D., Svensen, T. E., and Milne, A., 1981, "Estimating the Technical and Economic Penalties of Hull and Propeller Roughness," Trans. SNAME, 89, pp. 295-318.
14. Durbin, P. A., 2009, "Limiters and Wall Treatments in Applied Turbulence Modeling," Fluid Dyn. Res., 41, p. 012203.
15. Leighton, R. I., and Walker, D. T., 2007, "Reynolds Stress Modeling for Rough Wall Turbulence: An Invited Paper," 37th AIAA Fluid Dynamics Conference and Exhibit, AIAA Paper No. 2007-4615.
16. Durbin, P. A., Medic, G., Seo, J. M., Eaton, J. K., and Song, S., 2001, "Rough Wall Modification of Two-Layer k-ε ," ASME J. Fluids Eng., 123, pp. 16- 21.
17. Seo, J. M., 2004, "Closure Modeling and Numerical Simulation for Turbulent Flows: Wall Roughness Model, Realizability and Turbine Blade Heat Transfer," Ph.D. thesis, Stanford University, Stanford, CA.
18. Flack, K. A., Schultz, M. P., and Connelly, J. S., 2007, "Examination of a Critical Roughness Height for Boundary Layer Similarity," Phys. Fluids, 19, p. 095104.
19. Hama, F. R., 1954, "Boundary-Layer Characteristics for Smooth and Rough Surfaces," Trans. SNAME, 62, pp. 333-351.
20. Bandyopadhyay, P. R., 1987, "Rough Wall Turbulent Boundary Layers in the Transition Regime," J. Fluid Mech., 180, pp. 231-266.
21. Raupach, M. R., Antonia, R. A., and Rajagopalan, S., 1991, "Rough Wall Turbulent Boundary Layers," Appl. Mech. Rev., 44, pp. 1-25.
22. Antonia, R. A., and Krogstad, P. Å., 2001, "Turbulence Structure in Boundary Layers Over Different Types of Surface Roughness," Fluid Dyn. Res., 28, pp. 139-157.
23. Castro, I. P., 2007, "Rough-Wall Boundary Layers: Mean Flow Universality," J. Fluid Mech., 585, pp. 469-485.
24. Schultz, M. P., and Flack, K. A., 2003, "Turbulent Boundary Layers Over Surfaces Smoothed by Sanding," ASME J. Fluids Eng., 125, pp. 863-870.
25. Flack, K. A., Schultz, M. P., and Shapiro, T. A., 2005, "Experimental Support for Townsend's Reynolds Number Similarity Hypothesis on Rough Walls," Phys. Fluids, 17, p. 035102.
26. Schultz, M. P., and Flack, K. A., 2007, "The Rough-Wall Turbulent Boundary Layer From the Hydraulically Smooth to the Fully Rough Regime," J. Fluid Mech., 580, pp. 381-405.
27. Schultz, M. P., and Flack, K. A., 2009, "Turbulent Boundary Layers on a Systematically-Varied Rough Wall," Phys. Fluids, 21, p. 015104.
28. Schultz, M. P., and Flack, K. A., 2005, "Outer Layer Similarity in Fully Rough Turbulent Boundary Layers," Exp. Fluids, 38, pp. 328-340.
29. Ligrani, P. M., and Moffat, R. J., 1986, "Structure of Transitionally Rough and Fully Rough Turbulent Boundary Layers," J. Fluid Mech., 162, pp. 69-98.
30. Shockling, M. A., Allen, J. J., and Smits, A. J., 2006, "Roughness Effects in Turbulent Pipe Flow," J. Fluid Mech., 564, pp. 267-285.
31. Lewkowicz, A. K., and Musker, A. J., 1978, "The Surface Roughness on Ship Hulls: Interaction in the Viscous Sublayer," Proceedings of the International Symposium on Ship Viscous Resistance-SSPA, Goteborg, Sweden.
32. Clauser, F. H., 1956, "The Turbulent Boundary Layer," Adv. Appl. Mech., 4, pp. 1-51.
33. Bettermann, D., 1965, "Contribtion a L'etude de la Couche Limite Turbulent le Long de Plaques Regueuses," Center National de la Recherche Scientifique, Report No. 65-6.
34. Dvorak, F. A., 1969, "Calculation of Turbulent Boundary Layers on Rough Surfaces in Pressure Gradients," AIAA J., 7, pp. 1752-1759.
35. Granville, P. S., 1958, "The Frictional Resistance and Turbulent Boundary Layer of Rough Surfaces," J. Ship. Res., 2, pp. 52-74.
36. Lui, C. K., Kline, S. J., and Johnston, J. P., 1966, "An Experimental Study of Turbulent Boundary Layers on Rough Walls," Department of Mechanical Engineering, Stanford University, Report No. MD-15.
37. Schlichting, H., 1937, "Experimental Investigation of the Problem of Surface Roughness," NACA Technical Memorandum 823.
38. Simpson, R. L., 1973, "A Generalized Correlation of Roughness Density Effects on the Turbulent Boundary Layer," AIAA J., 11, pp. 242-244.
39. Schlichting, H., 1979, Boundary-Layer Theory, 7th ed., McGraw-Hill, New York.
40. Chen, D. K., and Roberson, J. A., 1971, "The Structure of Turbulence in the Wakes of Roughness Elements," ASCS Hydraulics Division Specialty Conference, University of Iowa, Iowa City, IA.
41. Streeter, V. L., 1936, "Frictional Resistance in Artificially Roughened Pipes," Proceedings of the ASCE, Vol.101, pp. 681-713.
42. Dirling, R. B., 1973, "A Method for Computing Rough Wall Heat Transfer Rates on Re-Entry Nosetips," AIAA Paper No. 73-763.
43. Sigal, A., and Danberg, J. E., 1990, "New Correlation of Roughness Density Effects on the Turbulent Boundary Layer," AIAA J., 28, pp. 554-556.
44. van Rij, J. A., Belnap, B. J., and Ligrani, P. M., 2002, "Analysis and Experiments on Three-Dimensional, Irregular Surface Roughness," ASME J. Fluids Eng., 124, pp. 671-677.
45. Coleman, H. W., Hodges, B. K., and Taylor, R. P., 1984, "A Re-Evaluation of Schlichting's Surface Roughness Experiment," ASME J. Fluids Eng., 106, pp. 60-65.
46. Waigh, D. R., and Kind, R. J., 1998, "Improved Aerodynamic Characterization of Regular Three-Dimensional Roughness," AIAA J., 36, pp. 1117-1119.
47. Bons, J. P., 2002, "St and CF Augmentation for Real Turbine Roughness With Elevated Freestream Turbulence," ASME Paper No. GT-2002-30198.
48. Musker, A. J., 1980-1981, "Universal Roughness Functions for Naturally- Occurring Surfaces," Trans. Can. Soc. Mech. Eng., 1, pp. 1-6.
49. Taylor, G. I., 1938, "The Spectrum of Turbulence," Proc. R. Soc. London, Ser. A, 164, pp. 476-490.
50. Medhurst, J. S., 1989, "The Systematic Measurement and Correlation of the Frictional Resistance and Topography of Ship Hull Coatings, With Particular Reference to Ablative Antifoulings," Ph.D. thesis, University of Newcastleupon- Tyne, Newcastle, UK.
51. Medhurst, J. S., 1990, "Outline of a Draft International Standard for the Measurement and Characterisation of Roughness Topography in Fluid Flow," Proceedings of the RINA International Workshop on Marine Roughness and Drag, London, UK.
52. Townsin, R. L., and Dey, S. K., 1990, "The Correlation of Roughness Drag With Surface Characteristics," Proceedings of the RINA International Workshop on Marine Roughness and Drag, London, UK.
53. Schultz, M. P., 2007, "Effects of Coating Roughness and Biofouling on Ship Resistance and Powering," Biofouling, 23, pp. 331-341.
54. Granville, P. S., 1978, "Similarity-Law Characterization Methods for Arbitrary Hydrodynamic Roughness," David W. Taylor Naval Ship Research and Development Center, Report No. 78-SPD-815-01.
55. Granville, P. S., 1987, "Three Indirect Methods for the Drag Characterization of Arbitrarily Rough Surfaces on Flat Plates," J. Ship. Res., 31, pp. 70-77.
56. Schoennerr, K. E., 1932, "Resistances of Flat Surfaces Moving Through a Fluid," Trans. SNAME, 40, pp. 279-313.
57. Bradshaw, P., 2000, "A Note on 'Critical Roughness Height' and 'Transitional Roughness'," Phys. Fluids, 12, pp. 1611-1614.
58. Napoli, E., Armenio, V., and DeMarchis, M., 2008, "The Effect of the Slope of Irregularly Distributed Roughness Elements on Turbulent Wall-Bounded Flows," J. Fluid Mech., 613, pp. 385-394.
59. Howell, D., and Behrends, B., 2006, "A Review of Surface Roughness in Antifouling Coatings Illustrating the Importance of Cutoff Length," Biofouling, 22, pp. 401-410.
60. Shapiro, T. A., Schultz, M. P., and Flack, K. A., 2004, "The Effect of Surface Roughness on Hydrodynamic Drag and Turbulence," USNA Trident Scholar, Report No. USNA-1531-2.