Incubation time and cavitation erosion rate of work-hardening materials

Journal of Fluids Engineering, Transactions of the ASME

Volumn 131, Issue 2, 2009, Pages 0213031-02130314

  Franc, Jean Pierre ^a  

^a LEGI   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITIONAL DEPENDENCES; BUBBLE COLLAPSE; CAVITATING FLOW; CAVITATION EROSION; CAVITATION TUNNELS; DUCTILE MATERIALS; EROSION RATES; EROSION TEST; EXPLICIT EQUATIONS; FLUID SIDES; GEOMETRIC FEATURE; HARDENED LAYERS; HYDRODYNAMIC IMPACTS; IMPACT LOADS; INCUBATION TIME; INTEGRAL PARAMETERS; LENGTH SCALE; LONG DURATION; MAIN PARAMETERS; MASS LOSS; MATERIAL RESPONSE; MATERIAL SURFACE; MEAN SIZE; MULTIPLICATIVE FACTORS; ON FLOW; PENETRATION RATES; PHENOMENOLOGICAL ANALYSIS; STAINLESS STEEL 316; STEADY-STATE CONDITION; THEORETICAL APPROACH; TIME-SCALES; ULTIMATE STRENGTH; WORK HARDENING; YIELD STRENGTH;

CAVITATION; CAVITATION CORROSION; DUCTILITY; FLUID DYNAMICS; HARDENING; HYDRODYNAMICS; MATERIALS; SOIL MECHANICS; STAINLESS STEEL;

STATISTICAL TESTS;

EID: 77955262171     PISSN: 00982202     EISSN: 1528901X     Source Type: Journal    
DOI: 10.1115/1.3063646     Document Type: Article

References (35)

1. Pereira, F., Avellan, F., and Dupont, Ph., 1998, "Prediction of Cavitation Erosion: An Energy Approach", ASME J. Fluids Eng., 120, pp. 719-727.
2. Lecoffre, Y., Marcoz, J., Franc, J. P., and Michel, J. M., 1985, "Tentative Procedure for Scaling Cavitation Damage", Proceedings of the Joint ASCE/ASME Mechanics Conference on "Cavitation in Hydraulic Structures and Turbomachinery", Albuquerque, NM, Jun. 24-26, R. E. A. Arndt and D. R. Webb, eds., FED-Vol. 25, pp. 1-11.
3. Kato, H., 1975, "A Consideration on Scaling Laws of Cavitation Erosion", Int. Shipbuild. Prog., 22 (253), pp. 305-327.
4. Kato, H., Konno, A., Maeda, M., and Yamaguchi, H., 1996, "Possibility of Quantitative Prediction of Cavitation Erosion Without Model Test", ASME J. Fluids Eng., 118, pp. 582-588.
5. Maeda, M., Yamaguchi, H., and Kato, H., 1991, "Laser Holography Measurement of Bubble Population in Cavitation Cloud on a Foil Section" First ASME-JSME Fluids Engineering Conference, Portland, OR, Jun. 23-27, H. Kato and O. Furuya, eds., FED-Vol. 116, pp. 67-75.
6. Tomita, Y, and Shima, A., 1986, "Mechanism of Impulsive Pressure Generation and Damage Pit Formation by Bubble Collapse", J. Fluid Mech., 169, pp. 535-564.
7. Vogel, A., Lauterborn, W., and Timm, R., 1989, "Optical and Acoustic Investigations of the Dynamics of Laser-Produced Cavitation Bubbles Near a Solid Boundary", J. Fluid Mech., 206, pp. 299-338.
8. Philipp, A., and Lauterborn, W., 1998, "Cavitation Erosion by Single Laser-Produced Bubbles", J. Fluid Mech., 361, pp. 75-116.
9. Reisman, G. E., Wang, Y.-C, and Brennen, C. E., 1998, "Observation of Shock Waves in Cloud Cavitation", J. Fluid Mech., 355, pp. 255-283.
10. Knapp, R. T., Daily, J. W., and Hammitt, F G., 1970, Cavitation, McGraw-Hill, New York.
11. Stinebring, D. R., Holl, J. W, and Arndt, R. E. A., 1980, "Two Aspects of Cavitation Damage in the Incubation Zone: Scaling by Energy Considerations and Leading Edge Damage", ASME J. Fluids Eng., 102, pp. 481-485.
12. Fortes Patella, R., Reboud, J. L., and Archer, A., 2000, "Cavitation Damage Measurement by 3D Laser Profilometry", Wear, 246, pp. 59-67.
13. Hammitt, F G., 1979, "Cavitation Erosion: The State of the Art and Predicting Capability", Appl. Mech. Rev., 32 (6), pp. 665-675.
14. Hattori, S., Sun, B.-H., Hammitt, F G., and Okada, T., 1985, "An Application of Bubble Collapse Pulse Height Spectra to Venturi Cavitation Erosion of 1100-O Aluminium", Wear, 103, pp. 119-131.
15. Okada, T., Iwai, Y, Hattori, S., and Tanimura, N., 1995, "Relation Between Impact Load and the Damage Produced by Cavitation Bubble Collapse", Wear, 184, pp. 231-239.
16. Hattori, S., Mori, H., and Okada, T., 1998, "Quantitative Evaluation of Cavitation Erosion", ASME J. Fluids Eng., 120, pp. 179-185.
17. Knapp, R. T., 1955, "Recent Investigations of the Mechanics of Cavitation and Cavitation Damage", Trans. ASME, October, pp. 1045-1054.
18. Knapp, R. T., 1958, "Accelerated Field Tests of Cavitation Intensity", Trans. ASME, January, pp. 91-102.
19. Belahadji, B., Franc, J. P., and Michel, J. M., 1991, "A Statistical Analysis of Cavitation Erosion Pits", ASME J. Fluids Eng., 113, pp. 700-706.
20. Thiruvengadam, A., 1974, "Handbook of Cavitation Erosion", Hydronautics Inc., Technical Report No. 7301-1.
21. Karimi, A., and Martin, J. L., 1986, "Cavitation Erosion of Materials", Int. Met. Rev., 31 (1), pp. 1-26.
22. Pallabazzer, R., and Mancuso, G., 1998, "Erosive Cavitation Tests in Water Tunnel", XIX Symposium AIRH, pp. 500-509.
23. Zhou, Y K., and Hammitt, F G., 1983, "Cavitation Erosion Incubation Period", Wear, 86, pp. 299-313.
24. Karimi, A., and Leo, W. R., 1987, "Phenomenological Model for Cavitation Rate Computation", Mater. Sci. Eng., 95, pp. 1-14.
25. Berchiche, N., Franc, J. P., and Michel, J. M., 2002, "A Cavitation Erosion Model for Ductile Materials", ASME J. Fluids Eng., 124, pp. 601-606. (Pubitemid 40001398)
26. Ball, A., 1983, "On the Importance of Work Hardening in the Design of Wear-Resistant Materials", Wear, 91, pp. 201-207.
27. Li, S., Zhang, Y., and Hammitt, F G., 1986, "Characteristics of Cavitation Bubble Collapse Pulses, Associated Pressure Fluctuations, and Flow Noise", J. Hydraul. Res., 24 (2), pp. 109-122.
28. Nguyen, M., Franc, J. P., and Michel, J. M., 1987, "On Correlating Pitting Rate and Pressure Peak Measurements in Cavitating Flows", J. W. Holl and M. L. Billet, eds., Proceedings of the ASME International Symposium on Cavitation Research Facilities and Techniques, ASME, Boston, Dec. 13-18, FED-Vol. 57, pp. 207-216.
29. Fry, S. A., 1989, "The Damage Capacity of Cavitating Flow From Pulse Height Analysis", ASME J. Fluids Eng., 111, pp. 502-509.
30. Momma, T., and Lichtarowicz, A., 1995, "A Study of Pressures and Erosion Produced by Collapsing Cavitation", Wear, 186-187, pp. 425-436.
31. Franc, J. P., and Michel, J. M., 2004, Fundamentals of Cavitation, Kluwer Academic, Dordrecht.
32. Soyama, Y., and Futakawa, M., 2004, "Estimation of Incubation Time of Cavitation Erosion for Various Cavitating Conditions", Tribol. Lett., 17 (1), pp. 27-30.
33. Hattori, S., Ishikura, R., and Zhang, Q., 2004, "Construction of Database on Cavitation Erosion and Analyses of Carbon Steel Data", Wear, 257 (9-10), pp. 1022-1029.
34. Hattori, S., Maeda, K., and Zhang, Q., 2004, "Formulation of Cavitation Erosion Behavior Based on Logistic Analysis", Wear, 257 (9-10), pp. 1064-1070.
35. Bedkowski, W., Gasiak, G., Lachowicz, C, Lichtarowicz, A., Lagoda, T., and Macha, E., 1999, "Relations Between Cavitation Erosion Resistance of Materials and Their Fatigue Strength Under Random Loading", Wear, 230, pp. 201-209.