Effects of Accelerated Artificial Daylight Aging on Bending Strength and Bonding of Glass Fibers in Fiber-Embedded Maxillofacial Silicone Prostheses

Journal of Prosthodontics

Volumn 19, Issue 5, 2010, Pages 357-363

  Hatamleh, Muhanad M ^a   Watts, David C ^a  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Artificial aging; Bending strength; Bond strength; Maxillofacial silicone elastomer; Pull out test.

Indexed keywords

BIOMATERIAL; EVERSTICK; GLASS; GLASS FIBER; RESIN; SILASTIC; SILICON DIOXIDE; WATER;

ADHESION; ARTICLE; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DESICCATION; HEAT; HUMAN; ILLUMINATION; MATERIALS TESTING; MAXILLOFACIAL PROSTHESIS; MECHANICAL STRESS; PLIABILITY; RADIATION EXPOSURE; RANDOMIZED CONTROLLED TRIAL; TENSILE STRENGTH; TIME; ULTRAVIOLET RADIATION;

ADHESIVENESS; BIOCOMPATIBLE MATERIALS; COMPOSITE RESINS; DESICCATION; GLASS; HOT TEMPERATURE; HUMANS; LIGHTING; MATERIALS TESTING; MAXILLOFACIAL PROSTHESIS; PLIABILITY; QUARTZ; SILICONE ELASTOMERS; STRESS, MECHANICAL; TENSILE STRENGTH; TIME FACTORS; ULTRAVIOLET RAYS; WATER;

EID: 77955076283     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2010.00584.x     Document Type: Article

References (42)

1. Wolfaardt JF, Cleaton-Jones P, Lownie J. Biocompatibility testing of a silicone maxillofacial prosthetic elastomer: soft tissue study in primates. J Prosthet Dent 1992, 68:331-338.
2. Lewis DH, Castleberry DJ. An assessment of recent advances in external maxillofacial materials. J Prosthet Dent 1980, 43:426-432.
3. Chang TL, Garrett N, Roumanas E. Treatment satisfaction with facial prostheses. J Prosthet Dent 2005, 94:275-280.
4. Frangou MJ, Polyzois GL, Tarantili PA. Bonding of silicone extra-oral elastomers to acrylic resin: the effect of primer composition. Eur J Prosthodont Restor Dent 2003, 11:115-118.
5. Scolozzi P, Jaques B. Treatment of midfacial defects using prostheses supported by ITI dental implants. Plast Reconstr Surg 2004, 114:1395-1404.
6. Grant GT, Taft RM, Wheeler ST. Practical application of polyurethane and Velcro in maxillofacial prosthetics. J Prosthet Dent 2001, 85:281-283.
7. Kiat-Amnuay S, Waters PJ, Roberts D. Adhesive retention of silicone and chlorinated polyethylene for maxillofacial prostheses. J Prosthet Dent 2008, 99:483-488.
8. Kurunmaki H, Kantola R, Hatamleh MM. A fiber-reinforced composite prosthesis restoring a lateral midfacial defect: a clinical report. J Prosthet Dent 2008, 100:348-352.
9. Wolf B, Reitemeier B, Schmidt A. In vitro testing of the bond between soft materials used for maxillofacial prostheses and cast titanium. J Prosthet Dent 2001, 85:401-408.
10. Lassila LV, Nohrstrom T, Vallittu PK. The influence of short-term water storage on the flexural properties of unidirectional glass fiber-reinforced composites. Biomaterials 2002, 23:2221-2229.
11. Miettinen VM, Narva KK, Vallittu PK. Water sorption, solubility and effect of post-curing of glass fibre reinforced polymers. Biomaterials 1999, 20:1187-1194.
12. Brown D. Fibre-reinforced materials. Dent Update 2000, 27:442-448.
13. Tuusa SM, Peltola MJ, Tirri T. Frontal bone defect repair with experimental glass-fiber-reinforced composite with bioactive glass granule coating. J Biomed Mater Res B Appl Biomater 2007, 82:149-155.
14. Tuusa SM, Peltola MJ, Tirri T. Reconstruction of critical size calvarial bone defects in rabbits with glass-fiber-reinforced composite with bioactive glass granule coating. J Biomed Mater Res B Appl Biomater 2008, 84:510-519.
15. Kiat-Amnuay S, Mekayarajjananonth T, Powers JM. Interactions of pigments and opacifiers on color stability of MDX4-4210/type A maxillofacial elastomers subjected to artificial aging. J Prosthet Dent 2006, 95:249-257.
16. Polyzois GL. Color stability of facial silicone prosthetic polymers after outdoor weathering. J Prosthet Dent 1999, 82:447-450.
17. Hooper SM, Westcott T, Evans PL. Implant-supported facial prostheses provided by a maxillofacial unit in a U.K. regional hospital: longevity and patient opinions. J Prosthodont 2005, 14:32-38.
18. Eleni PN, Krokida MK, Frangou MJ. Structural damages of maxillofacial biopolymers under solar aging. J Mater Sci Mater Med 2007, 18:1675-1681.
19. Tran NH, Scarbecz M, Gary JJ. In vitro evaluation of color change in maxillofacial elastomer through the use of an ultraviolet light absorber and a hindered amine light stabilizer. J Prosthet Dent 2004, 91:483-490.
20. Dootz ER, Koran A, Craig RG. Physical properties of three maxillofacial materials as a function of accelerated aging. J Prosthet Dent 1994, 71:379-383.
21. Mohite UH, Sandrik JL, Land MF. Environmental factors affecting mechanical properties of facial prosthetic elastomers. Int J Prosthodont 1994, 7:479-486.
22. Polyzois GL, Tarantili PA, Frangou MJ. Physical properties of a silicone prosthetic elastomer stored in simulated skin secretions. J Prosthet Dent 2000, 83:572-577.
23. Deng HY, Zwetchkenbaum S, Noone AM. Bond strength of silicone to polyurethane following immersion of silicone in cleaning solutions. J Prosthet Dent 2004, 91:582-585.
24. Haug SP, Andres CJ, Munoz CA. Effects of environmental factors on maxillofacial elastomers: part III-physical properties. J Prosthet Dent 1992, 68:644-651.
25. Andres CJ, Haug SP, Munoz CA. Effects of environmental factors on maxillofacial elastomers: part I-literature review. J Prosthet Dent 1992, 68:327-330.
26. Hatamleh MM, Watts DC. Porosities and bonding of maxillofacial silicone elastomer with embedded glass fiber-bundles. Int J Anaplast 2008, 2:15-23.
27. Takaku A, Arrdige R. The effect of interfacial radial and shear stress on fibre pull-out in composite materials. J Appl Phys 1973, 6:2038-2047.
28. Mai YW, Castino F. The debonding and pull-out properties of coated fibres from an epoxy resin matrix. J Mater Sci Lett 1985, 4:505-508.
29. Mannocci F, Sherriff M, Watson T. Three-point bending test of fiber posts. J Endod 2001, 27:758-761.
30. Hulterstrom AK, Ruyter IE. Changes in appearance of silicone elastomers for maxillofacial prostheses as a result of aging. Int J Prosthodont 1999, 12:498-504.
31. Lai JH, Hodges JS. Effects of processing parameters on physical properties of the silicone maxillofacial prosthetic materials. Dental Mater 1999, 15:450-455.
32. Raptis CN, Yu R, Knapp JG. Properties of silicone maxillofacial elastomer processed in stone and metal. J Prosthet Dent 1980, 44:447-450.
33. Beatty MW, Mahanna GK, Jia W. Ultraviolet radiation-induced color shifts occurring in oil-pigmented maxillofacial elastomers. J Prosthet Dent 1999, 82:441-446.
34. Bellamy K, Limbert G, Waters MG. An elastomeric material for facial prostheses: synthesis, experimental and numerical testing aspects. Biomaterials 2003, 24:5061-5066.
35. Aziz T, Waters M, Jagger R. Development of a new poly(dimethylsiloxane) maxillofacial prosthetic material. J Biomed Mater Res 2003, 65:252-261.
36. Guo J-H. Aging processes in pharmaceutical polymers. Pharm Sci Technol Today 1999, 2:478-483.
37. Maxwell RS, Sung W, Solyom D. The effects of [gamma]-radiation on the thermal, mechanical, and segmental dynamics of a silica filled, room temperature vulcanized polysiloxane rubber. Polym Degrad Stab 2003, 80:443-450.
38. Adisman IK. Prosthesis serviceability for acquired jaw defects. Dent Clin North Am 1990, 34:265-284.
39. Al-Salehi SK, Calder ID, Lamb DJ. Magnetic retention for obturators. J Prosthodont 2007, 16:214-218.
40. Lehmann KM, Arnim FV. Studies on the retention forces of snap-on attachments. Quintes Dent Technol 1978, 7:45-48.
41. Ballo A, Lassila LV, Narhi T. In vitro mechanical testing of glass fiber-reinforced composite used as dental implants. J Contemp Dent Pract 2008, 9:41-48.
42. Rueggeberg FA, Caughman WF, Curtis JW. Effect of light intensity and exposure duration on cure of resin composite. Oper Dent 1994, 19:26-32.